Commit 7f70083c authored by Tomek Mrugalski's avatar Tomek Mrugalski 🛰
Browse files

[3554] Example config added.

parent 72f999e3
......@@ -8,6 +8,7 @@ nobase_dist_doc_DATA += examples/kea4/multiple-options.json
nobase_dist_doc_DATA += examples/kea6/simple.json
nobase_dist_doc_DATA += examples/kea6/several-subnets.json
nobase_dist_doc_DATA += examples/kea6/multiple-options.json
nobase_dist_doc_DATA += examples/kea6/advanced.json
nobase_dist_doc_DATA += examples/ddns/sample1.json
nobase_dist_doc_DATA += examples/ddns/template.json
......
# This is an example configuration file for DHCPv6 server in Kea.
# It attempts to showcase some of the more advanced features.
# Topology wise, it's a basic scenario with one IPv6 subnet configured.
# It is assumed that one subnet (2001:db8:1::/64) is available directly
# over eth0 interface.
{ "Dhcp6":
{
# Kea is told to listen on eth0 interface only.
"interfaces": [ "eth0" ],
# We need to specify lease type. As of May 2014, three backends are supported:
# memfile, mysql and pgsql. We'll just use memfile, because it doesn't require
# any prior set up.
"lease-database": {
"type": "memfile"
},
# Kea 0.9.1 introduced MAC/hardware addresses support in DHCPv6. There is
# no single reliable method of getting MAC address information in DHCPv6.
# Kea supports several methods. Depending on your network set up, some
# methods may be more preferable than others, hence the configuration
# parameter. 'mac-sources' is a list of methods. Allowed parameters are:
# any, raw, duid, ipv6-link-local, client-link-addr-option, rfc6939 (which
# is an alias for client-link-addr-option), remote-id, rfc4649 (which is an
# alias for remote-id, subscriber-id, rfc4580 (which is an alias for
# subscriber-id) and docsis.
#
# If mac-sources are not specified, a default value of 'any' is used.
"mac-sources": [ "client-link-addr-option", "duid", "ipv6-link-local" ],
# Addresses will be assigned with preferred and valid lifetimes
# being 3000 and 4000, respectively. Client is told to start
# renewing after 1000 seconds. If the server does not repond
# after 2000 seconds since the lease was granted, client is supposed
# to start REBIND procedure (emergency renewal that allows switching
# to a different server).
"preferred-lifetime": 3000,
"valid-lifetime": 4000,
"renew-timer": 1000,
"rebind-timer": 2000,
# The following list defines subnets. Each subnet consists of at
# least subnet and pool entries.
"subnet6": [
{
"pools": [ { "pool": "2001:db8:1::/80" } ],
"subnet": "2001:db8:1::/64",
"interface": "eth0"
}
]
},
# The following configures logging. Kea will log all debug messages
# to /var/log/kea-debug.log file.
"Logging": {
"loggers": [
{
"name": "kea-dhcp6",
"output_options": [
{
"output": "/var/log/kea-debug.log"
}
],
"debuglevel": 99,
"severity": "DEBUG"
}
]
}
}
# This is an example configuration file for DHCPv6 server in Kea.
# It's a basic scenario with four IPv6 subnets configured. It is
# It's a basic scenario with one IPv6 subnet configured. It is
# assumed that one subnet (2001:db8:1::/64 is available directly
# over eth0 interface.
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment