Commit c3f6b67f authored by Tomek Mrugalski's avatar Tomek Mrugalski 🛰
Browse files

Merge branch 'trac2898' of ssh://git.bind10.isc.org/var/bind10/git/bind10 into trac2898

parents d5a47211 be918f9a
......@@ -4873,28 +4873,28 @@ should include options from the isc option space:
<para>
A DHCPv6 server with multiple subnets defined must select the
appropriate subnet when it receives a request from client. For clients
connected via relays, two mechanisms are used.
connected via relays, two mechanisms are used:
</para>
<para>
The first uses the linkaddr field in the RELAY_FORW message. The name
of this field is somewhat misleading in that it does not contain link-layer
of this field is somewhat misleading in that it does not contain a link-layer
address: instead, it holds an address (typically a global address) that is
used to identify a link. The DHCPv6 server checks if the address belongs
to a defined subnet and, if it does, that subnet is selected for the client's
request.
</para>
<para>
The second mechanism is based on interface-id options. While forwarding client's
The second mechanism is based on interface-id options. While forwarding a client's
message, relays may insert an interface-id option into the message that
identifies the interface on the relay that received client message. (Some
identifies the interface on the relay that received the message. (Some
relays allow configuration of that parameter, but it is sometimes
hardcoded and may range from very simple (e.g. "vlan100") to very cryptic:
hardcoded and may range from the very simple (e.g. "vlan100") to the very cryptic:
one example seen on real hardware was "ISAM144|299|ipv6|nt:vp:1:110"). The
server can use this information to select the appropriate subnet.
The information is also returned to the relay which then knows which
interface to use to transmit the response to the client. In order to
use this successfully, the relay interface IDs must be unique within
the network, and the server configuration must match those values.
The information is also returned to the relay which then knows the
interface to use to transmit the response to the client. In order for
this to work successfully, the relay interface IDs must be unique within
the network and the server configuration must match those values.
</para>
<para>
When configuring the DHCPv6 server, it should be noted that two
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment