tests.sh 37.3 KB
Newer Older
1 2
#!/bin/sh
#
Automatic Updater's avatar
Automatic Updater committed
3
# Copyright (C) 2009-2011  Internet Systems Consortium, Inc. ("ISC")
4 5 6 7 8 9 10 11 12 13 14 15 16
#
# Permission to use, copy, modify, and/or distribute this software for any
# purpose with or without fee is hereby granted, provided that the above
# copyright notice and this permission notice appear in all copies.
#
# THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
# AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
# PERFORMANCE OF THIS SOFTWARE.

17
# $Id: tests.sh,v 1.27 2011/05/26 04:25:47 each Exp $
18 19 20 21

SYSTEMTESTTOP=..
. $SYSTEMTESTTOP/conf.sh

22 23
RANDFILE=random.data

24 25 26 27 28
status=0
n=0

DIGOPTS="+tcp +noadd +nosea +nostat +nocmd +dnssec -p 5300"

29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56
# convert private-type records to readable form
showprivate () {
    echo "-- $@ --"
    $DIG $DIGOPTS +nodnssec +short @$2 -t type65534 $1 | cut -f3 -d' ' |
        while read record; do
            perl -e 'my $rdata = pack("H*", @ARGV[0]);
                die "invalid record" unless length($rdata) == 5;
                my ($alg, $key, $remove, $complete) = unpack("CnCC", $rdata);
                my $action = "signing";
                $action = "removing" if $remove;
                my $state = " (incomplete)";
                $state = " (complete)" if $complete;
                print ("$action: alg: $alg, key: $key$state\n");' $record
        done
}

# check that signing records are marked as complete
checkprivate () {
    ret=0
    x=`showprivate "$@"`
    echo $x | grep incomplete >&- 2>&- && ret=1
    [ $ret = 1 ] && {
        echo "$x"
        echo "I:failed"
    }
    return $ret
}

57 58 59 60 61 62 63 64 65 66 67
#
#  The NSEC record at the apex of the zone and its RRSIG records are
#  added as part of the last step in signing a zone.  We wait for the
#  NSEC records to appear before proceeding with a counter to prevent
#  infinite loops if there is a error.
#
echo "I:waiting for autosign changes to take effect"
i=0
while [ $i -lt 30 ]
do
	ret=0
68 69 70 71 72 73
	#
	# Wait for the root DNSKEY RRset to be fully signed.
	#
	$DIG $DIGOPTS . @10.53.0.1 dnskey > dig.out.ns1.test$n || ret=1
	grep "ANSWER: 10," dig.out.ns1.test$n > /dev/null || ret=1
	for z in .
74
	do
75 76 77 78 79 80
		$DIG $DIGOPTS $z @10.53.0.1 nsec > dig.out.ns1.test$n || ret=1
		grep "NS SOA" dig.out.ns1.test$n > /dev/null || ret=1
	done
	for z in bar. example. private.secure.example.
	do
		$DIG $DIGOPTS $z @10.53.0.2 nsec > dig.out.ns2.test$n || ret=1
81 82
		grep "NS SOA" dig.out.ns2.test$n > /dev/null || ret=1
	done
83
	for z in bar. example.
84
	do 
85
		$DIG $DIGOPTS $z @10.53.0.3 nsec > dig.out.ns3.test$n || ret=1
86 87 88 89 90 91 92
		grep "NS SOA" dig.out.ns3.test$n > /dev/null || ret=1
	done
	i=`expr $i + 1`
	if [ $ret = 0 ]; then break; fi
	echo "I:waiting ... ($i)"
	sleep 2
done
93
n=`expr $n + 1`
94
if [ $ret != 0 ]; then echo "I:failed"; else echo "I:done"; fi
95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113
status=`expr $status + $ret`

echo "I:checking NSEC->NSEC3 conversion prerequisites ($n)"
ret=0
# this command should result in an empty file:
$DIG $DIGOPTS +noall +answer nsec3.example. nsec3param @10.53.0.3 > dig.out.ns3.test$n || ret=1
grep "NSEC3PARAM" dig.out.ns3.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking NSEC3->NSEC conversion prerequisites ($n)"
ret=0
$DIG $DIGOPTS +noall +answer nsec3-to-nsec.example. nsec3param @10.53.0.3 > dig.out.ns3.test$n || ret=1
grep "NSEC3PARAM" dig.out.ns3.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

114
echo "I:converting zones from nsec to nsec3"
115
$NSUPDATE > /dev/null 2>&1 <<END	|| status=1
116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136
server 10.53.0.3 5300
zone nsec3.nsec3.example.
update add nsec3.nsec3.example. 3600 NSEC3PARAM 1 0 10 BEEF
send
zone optout.nsec3.example.
update add optout.nsec3.example. 3600 NSEC3PARAM 1 1 10 BEEF
send
zone nsec3.example.
update add nsec3.example. 3600 NSEC3PARAM 1 0 10 BEEF
send
zone nsec3.optout.example.
update add nsec3.optout.example. 3600 NSEC3PARAM 1 0 10 BEEF
send
zone optout.optout.example.
update add optout.optout.example. 3600 NSEC3PARAM 1 1 10 BEEF
send
zone optout.example.
update add optout.example. 3600 NSEC3PARAM 1 1 10 BEEF
send
END

137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157
# try to convert nsec.example; this should fail due to non-NSEC key
$NSUPDATE > nsupdate.out 2>&1 <<END
server 10.53.0.3 5300
zone nsec.example.
update add nsec.example. 3600 NSEC3PARAM 1 0 10 BEEF
send
END

echo "I:waiting for changes to take effect"
sleep 3

echo "I:converting zone from nsec3 to nsec"
$NSUPDATE > /dev/null 2>&1 << END	|| status=1
server 10.53.0.3 5300
zone nsec3-to-nsec.example.
update delete nsec3-to-nsec.example. NSEC3PARAM
send
END

echo "I:waiting for change to take effect"
sleep 3
158

159
# Send rndc sync command to ns1, ns2 and ns3, to force the dynamically
160 161
# signed zones to be dumped to their zone files
echo "I:dumping zone files"
162 163 164
$RNDC -c ../common/rndc.conf -s 10.53.0.1 -p 9953 sync 2>&1 | sed 's/^/I:ns1 /'
$RNDC -c ../common/rndc.conf -s 10.53.0.2 -p 9953 sync 2>&1 | sed 's/^/I:ns2 /'
$RNDC -c ../common/rndc.conf -s 10.53.0.3 -p 9953 sync 2>&1 | sed 's/^/I:ns3 /'
165

166 167 168 169 170 171 172 173 174
echo "I:checking expired signatures were updated ($n)"
ret=0
$DIG $DIGOPTS +noauth a.oldsigs.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.oldsigs.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`
175

176
echo "I:checking NSEC->NSEC3 conversion succeeded ($n)"
177
ret=0
178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205
$DIG $DIGOPTS nsec3.example. nsec3param @10.53.0.3 > dig.out.ns3.ok.test$n || ret=1
grep "status: NOERROR" dig.out.ns3.ok.test$n > /dev/null || ret=1
$DIG $DIGOPTS +noauth q.nsec3.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth q.nsec3.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking NSEC->NSEC3 conversion failed with NSEC-only key ($n)"
ret=0
grep "failed: REFUSED" nsupdate.out > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking NSEC3->NSEC conversion succeeded ($n)"
ret=0
# this command should result in an empty file:
$DIG $DIGOPTS +noall +answer nsec3-to-nsec.example. nsec3param @10.53.0.3 > dig.out.ns3.nx.test$n || ret=1
grep "NSEC3PARAM" dig.out.ns3.nx.test$n > /dev/null && ret=1
$DIG $DIGOPTS +noauth q.nsec3-to-nsec.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth q.nsec3-to-nsec.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
206 207 208 209
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245
echo "I:checking TTLs of imported DNSKEYs (no default) ($n)"
ret=0
$DIG $DIGOPTS +tcp +noall +answer dnskey ttl1.example. @10.53.0.3 > dig.out.ns3.test$n || ret=1
[ -s dig.out.ns3.test$n ] || ret=1
awk 'BEGIN {r=0} $2 != 300 {r=1; print "I:found TTL " $2} END {exit r}' dig.out.ns3.test$n || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking TTLs of imported DNSKEYs (with default) ($n)"
ret=0
$DIG $DIGOPTS +tcp +noall +answer dnskey ttl2.example. @10.53.0.3 > dig.out.ns3.test$n || ret=1
[ -s dig.out.ns3.test$n ] || ret=1
awk 'BEGIN {r=0} $2 != 60 {r=1; print "I:found TTL " $2} END {exit r}' dig.out.ns3.test$n || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking TTLs of imported DNSKEYs (mismatched) ($n)"
ret=0
$DIG $DIGOPTS +tcp +noall +answer dnskey ttl3.example. @10.53.0.3 > dig.out.ns3.test$n || ret=1
[ -s dig.out.ns3.test$n ] || ret=1
awk 'BEGIN {r=0} $2 != 30 {r=1; print "I:found TTL " $2} END {exit r}' dig.out.ns3.test$n || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking TTLs of imported DNSKEYs (existing RRset) ($n)"
ret=0
$DIG $DIGOPTS +tcp +noall +answer dnskey ttl4.example. @10.53.0.3 > dig.out.ns3.test$n || ret=1
[ -s dig.out.ns3.test$n ] || ret=1
awk 'BEGIN {r=0} $2 != 30 {r=1; print "I:found TTL " $2} END {exit r}' dig.out.ns3.test$n || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622
echo "I:checking positive validation NSEC ($n)"
ret=0
$DIG $DIGOPTS +noauth a.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth a.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking positive validation NSEC3 ($n)"
ret=0
$DIG $DIGOPTS +noauth a.nsec3.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking positive validation OPTOUT ($n)"
ret=0
$DIG $DIGOPTS +noauth a.optout.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking negative validation NXDOMAIN NSEC ($n)"
ret=0
$DIG $DIGOPTS +noauth q.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth q.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking negative validation NXDOMAIN NSEC3 ($n)"
ret=0
$DIG $DIGOPTS +noauth q.nsec3.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth q.nsec3.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking negative validation NXDOMAIN OPTOUT ($n)"
ret=0
$DIG $DIGOPTS +noauth q.optout.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth q.optout.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking negative validation NODATA NSEC ($n)"
ret=0
$DIG $DIGOPTS +noauth a.example. @10.53.0.2 txt > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth a.example. @10.53.0.4 txt > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "ANSWER: 0" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking negative validation NODATA NSEC3 ($n)"
ret=0
$DIG $DIGOPTS +noauth a.nsec3.example. \
	@10.53.0.3 txt > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.example. \
	@10.53.0.4 txt > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "ANSWER: 0" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking negative validation NODATA OPTOUT ($n)"
ret=0
$DIG $DIGOPTS +noauth a.optout.example. \
	@10.53.0.3 txt > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.example. \
	@10.53.0.4 txt > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "ANSWER: 0" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

# Check the insecure.example domain

echo "I:checking 1-server insecurity proof NSEC ($n)"
ret=0
$DIG $DIGOPTS +noauth a.insecure.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.insecure.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking 1-server negative insecurity proof NSEC ($n)"
ret=0
$DIG $DIGOPTS q.insecure.example. a @10.53.0.3 \
	> dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS q.insecure.example. a @10.53.0.4 \
	> dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

# Check the secure.example domain

echo "I:checking multi-stage positive validation NSEC/NSEC ($n)"
ret=0
$DIG $DIGOPTS +noauth a.secure.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.secure.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking multi-stage positive validation NSEC/NSEC3 ($n)"
ret=0
$DIG $DIGOPTS +noauth a.nsec3.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking multi-stage positive validation NSEC/OPTOUT ($n)"
ret=0
$DIG $DIGOPTS +noauth a.optout.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking multi-stage positive validation NSEC3/NSEC ($n)"
ret=0
$DIG $DIGOPTS +noauth a.secure.nsec3.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.secure.nsec3.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking multi-stage positive validation NSEC3/NSEC3 ($n)"
ret=0
$DIG $DIGOPTS +noauth a.nsec3.nsec3.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.nsec3.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking multi-stage positive validation NSEC3/OPTOUT ($n)"
ret=0
$DIG $DIGOPTS +noauth a.optout.nsec3.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.nsec3.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking multi-stage positive validation OPTOUT/NSEC ($n)"
ret=0
$DIG $DIGOPTS +noauth a.secure.optout.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.secure.optout.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking multi-stage positive validation OPTOUT/NSEC3 ($n)"
ret=0
$DIG $DIGOPTS +noauth a.nsec3.optout.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.optout.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking multi-stage positive validation OPTOUT/OPTOUT ($n)"
ret=0
$DIG $DIGOPTS +noauth a.optout.optout.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.optout.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking empty NODATA OPTOUT ($n)"
ret=0
$DIG $DIGOPTS +noauth empty.optout.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth empty.optout.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
#grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

# Check the insecure.secure.example domain (insecurity proof)

echo "I:checking 2-server insecurity proof ($n)"
ret=0
$DIG $DIGOPTS +noauth a.insecure.secure.example. @10.53.0.2 a \
	> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth a.insecure.secure.example. @10.53.0.4 a \
	> dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

# Check a negative response in insecure.secure.example

echo "I:checking 2-server insecurity proof with a negative answer ($n)"
ret=0
$DIG $DIGOPTS q.insecure.secure.example. @10.53.0.2 a > dig.out.ns2.test$n \
	|| ret=1
$DIG $DIGOPTS q.insecure.secure.example. @10.53.0.4 a > dig.out.ns4.test$n \
	|| ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking security root query ($n)"
ret=0
$DIG $DIGOPTS . @10.53.0.4 key > dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking positive validation RSASHA256 NSEC ($n)"
ret=0
$DIG $DIGOPTS +noauth a.rsasha256.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.rsasha256.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking positive validation RSASHA512 NSEC ($n)"
ret=0
$DIG $DIGOPTS +noauth a.rsasha512.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.rsasha512.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking that positive validation in a privately secure zone works ($n)"
ret=0
$DIG $DIGOPTS +noauth a.private.secure.example. a @10.53.0.2 \
	> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth a.private.secure.example. a @10.53.0.4 \
	> dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking that negative validation in a privately secure zone works ($n)"
ret=0
$DIG $DIGOPTS +noauth q.private.secure.example. a @10.53.0.2 \
	> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth q.private.secure.example. a @10.53.0.4 \
	> dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking privately secure to nxdomain works ($n)"
ret=0
$DIG $DIGOPTS +noauth private2secure-nxdomain.private.secure.example. SOA @10.53.0.2 \
	> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth private2secure-nxdomain.private.secure.example. SOA @10.53.0.4 \
	> dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

# Try validating with a revoked trusted key.
# This should fail.

623
echo "I:checking that validation returns insecure due to revoked trusted key ($n)"
624 625
ret=0
$DIG $DIGOPTS example. soa @10.53.0.5 > dig.out.ns5.test$n || ret=1
626 627
grep "flags:.*; QUERY" dig.out.ns5.test$n > /dev/null || ret=1
grep "flags:.* ad.*; QUERY" dig.out.ns5.test$n > /dev/null && ret=1
628 629 630 631 632 633
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking that revoked key is present ($n)"
ret=0
634
id=`sed 's/^K.+007+0*//' < rev.key`
635 636 637 638 639 640 641 642 643
id=`expr $id + 128 % 65536`
$DIG $DIGOPTS +multi dnskey . @10.53.0.1 > dig.out.ns1.test$n || ret=1
grep '; key id = '"$id"'$' dig.out.ns1.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking that revoked key self-signs ($n)"
ret=0
644
id=`sed 's/^K.+007+0*//' < rev.key`
645 646 647 648 649 650 651 652 653
id=`expr $id + 128 % 65536`
$DIG $DIGOPTS dnskey . @10.53.0.1 > dig.out.ns1.test$n || ret=1
grep 'RRSIG.*'" $id "'\. ' dig.out.ns1.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking for unpublished key ($n)"
ret=0
654
id=`sed 's/^K.+007+0*//' < unpub.key`
655 656 657 658 659 660 661 662
$DIG $DIGOPTS +multi dnskey . @10.53.0.1 > dig.out.ns1.test$n || ret=1
grep '; key id = '"$id"'$' dig.out.ns1.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking that standby key does not sign records ($n)"
ret=0
663
ed=`sed 's/^K.+007+0*//' < standby.key`
664 665 666 667 668 669 670 671
$DIG $DIGOPTS dnskey . @10.53.0.1 > dig.out.ns1.test$n || ret=1
grep 'RRSIG.*'" $id "'\. ' dig.out.ns1.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking that deactivated key does not sign records  ($n)"
ret=0
672
id=`sed 's/^K.+007+0*//' < inact.key`
673 674 675 676 677 678
$DIG $DIGOPTS dnskey . @10.53.0.1 > dig.out.ns1.test$n || ret=1
grep 'RRSIG.*'" $id "'\. ' dig.out.ns1.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697
echo "I:checking insertion of public-only key ($n)"
ret=0
id=`sed 's/^K.+007+0*//' < nopriv.key`
file="ns1/`cat nopriv.key`.key"
keydata=`grep DNSKEY $file`
$NSUPDATE > /dev/null 2>&1 <<END	|| status=1
server 10.53.0.1 5300
zone .
ttl 3600
update add $keydata
send
END
sleep 1
$DIG $DIGOPTS dnskey . @10.53.0.1 > dig.out.ns1.test$n || ret=1
grep 'RRSIG.*'" $id "'\. ' dig.out.ns1.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

698 699
echo "I:checking key deletion ($n)"
ret=0
700
id=`sed 's/^K.+007+0*//' < del.key`
701 702 703 704 705 706
$DIG $DIGOPTS +multi dnskey . @10.53.0.1 > dig.out.ns1.test$n || ret=1
grep '; key id = '"$id"'$' dig.out.ns1.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

707
echo "I:checking secure-to-insecure transition, nsupdate ($n)"
708 709 710 711 712 713 714 715 716 717 718 719 720 721
$NSUPDATE > /dev/null 2>&1 <<END	|| status=1
server 10.53.0.3 5300
zone secure-to-insecure.example
update delete secure-to-insecure.example dnskey
send
END
sleep 2
$DIG $DIGOPTS axfr secure-to-insecure.example @10.53.0.3 > dig.out.ns3.test$n || ret=1
egrep 'RRSIG.*'" $newid "'\. ' dig.out.ns3.test$n > /dev/null && ret=1
egrep '(DNSKEY|NSEC)' dig.out.ns3.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

722 723 724 725 726 727 728 729 730 731 732 733 734 735
echo "I:checking secure-to-insecure transition, scheduled ($n)"
file="ns3/`cat del1.key`.key"
$SETTIME -I now -D now $file > /dev/null
file="ns3/`cat del2.key`.key"
$SETTIME -I now -D now $file > /dev/null
$RNDC -c ../common/rndc.conf -s 10.53.0.3 -p 9953 sign secure-to-insecure2.example. 2>&1 | sed 's/^/I:ns3 /'
sleep 2
$DIG $DIGOPTS axfr secure-to-insecure2.example @10.53.0.3 > dig.out.ns3.test$n || ret=1
egrep 'RRSIG.*'" $newid "'\. ' dig.out.ns3.test$n > /dev/null && ret=1
egrep '(DNSKEY|NSEC3)' dig.out.ns3.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761
echo "I:checking that serial number and RRSIGs are both updated (rt21045) ($n)"
ret=0
oldserial=`$DIG $DIGOPTS +short soa prepub.example @10.53.0.3 | awk '$0 !~ /SOA/ {print $3}'`
oldinception=`$DIG $DIGOPTS +short soa prepub.example @10.53.0.3 | awk '/SOA/ {print $6}' | sort -u`

$KEYGEN -3 -q -r $RANDFILE -K ns3 -P 0 -A +6d -I +38d -D +45d prepub.example > /dev/null

$RNDC -c ../common/rndc.conf -s 10.53.0.3 -p 9953 sign prepub.example 2>&1 | sed 's/^/I:ns1 /'
newserial=$oldserial
try=0
while [ $oldserial -eq $newserial -a $try -lt 42 ]
do
	newserial=`$DIG $DIGOPTS +short soa prepub.example @10.53.0.3 |
		 awk '$0 !~ /SOA/ {print $3}'`
	sleep 1
	try=`expr $try + 1`
done
newinception=`$DIG $DIGOPTS +short soa prepub.example @10.53.0.3 | awk '/SOA/ {print $6}' | sort -u`
#echo "$oldserial : $newserial"
#echo "$oldinception : $newinception"

[ "$oldserial" = "$newserial" ] && ret=1
[ "$oldinception" = "$newinception" ] && ret=1
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

762 763 764 765 766 767
echo "I:preparing to test key change corner cases"
echo "I:removing a private key file"
file="ns1/`cat vanishing.key`.private"
rm -f $file

echo "I:preparing ZSK roll"
768
oldfile=`cat active.key`
769
oldid=`sed 's/^K.+007+0*//' < active.key`
770 771
newfile=`cat standby.key`
newid=`sed 's/^K.+007+0*//' < standby.key`
772
$SETTIME -K ns1 -I now+2s -D now+15 $oldfile > /dev/null
773
$SETTIME -K ns1 -i 0 -S $oldfile $newfile > /dev/null
774

775 776 777
# note previous zone serial number
oldserial=`$DIG $DIGOPTS +short soa . @10.53.0.1 | awk '{print $3}'`

778
$RNDC -c ../common/rndc.conf -s 10.53.0.1 -p 9953 loadkeys . 2>&1 | sed 's/^/I:ns1 /'
779
sleep 4
780 781

echo "I:revoking key to duplicated key ID"
782
$SETTIME -R now -K ns2 Kbar.+005+30676.key > /dev/null
783

784
$RNDC -c ../common/rndc.conf -s 10.53.0.2 -p 9953 loadkeys bar. 2>&1 | sed 's/^/I:ns2 /'
785 786 787 788 789 790 791 792 793 794 795 796

echo "I:waiting for changes to take effect"
sleep 5

echo "I:checking former standby key is now active ($n)"
ret=0
$DIG $DIGOPTS dnskey . @10.53.0.1 > dig.out.ns1.test$n || ret=1
grep 'RRSIG.*'" $newid "'\. ' dig.out.ns1.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

797 798 799 800 801 802 803 804 805
echo "I:checking former standby key has only signed incrementally ($n)"
ret=0
$DIG $DIGOPTS txt . @10.53.0.1 > dig.out.ns1.test$n || ret=1
grep 'RRSIG.*'" $newid "'\. ' dig.out.ns1.test$n > /dev/null && ret=1
grep 'RRSIG.*'" $oldid "'\. ' dig.out.ns1.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835
echo "I:checking that signing records have been marked as complete ($n)"
ret=0
checkprivate . 10.53.0.1 || ret=1
checkprivate bar 10.53.0.2 || ret=1
checkprivate example 10.53.0.2 || ret=1
checkprivate private.secure.example 10.53.0.3 || ret=1
checkprivate nsec3.example 10.53.0.3 || ret=1
checkprivate nsec3.nsec3.example 10.53.0.3 || ret=1
checkprivate nsec3.optout.example 10.53.0.3 || ret=1
checkprivate nsec3-to-nsec.example 10.53.0.3 || ret=1
checkprivate nsec.example 10.53.0.3 || ret=1
checkprivate oldsigs.example 10.53.0.3 || ret=1
checkprivate optout.example 10.53.0.3 || ret=1
checkprivate optout.nsec3.example 10.53.0.3 || ret=1
checkprivate optout.optout.example 10.53.0.3 || ret=1
checkprivate prepub.example 10.53.0.3 || ret=1
checkprivate rsasha256.example 10.53.0.3 || ret=1
checkprivate rsasha512.example 10.53.0.3 || ret=1
checkprivate secure.example 10.53.0.3 || ret=1
checkprivate secure.nsec3.example 10.53.0.3 || ret=1
checkprivate secure.optout.example 10.53.0.3 || ret=1
checkprivate secure-to-insecure2.example 10.53.0.3 || ret=1
checkprivate secure-to-insecure.example 10.53.0.3 || ret=1
checkprivate ttl1.example 10.53.0.3 || ret=1
checkprivate ttl2.example 10.53.0.3 || ret=1
checkprivate ttl3.example 10.53.0.3 || ret=1
checkprivate ttl4.example 10.53.0.3 || ret=1
n=`expr $n + 1`
status=`expr $status + $ret`

836 837 838 839 840 841 842 843 844 845 846 847 848 849 850
echo "I:forcing full sign"
$RNDC -c ../common/rndc.conf -s 10.53.0.1 -p 9953 sign . 2>&1 | sed 's/^/I:ns1 /'

echo "I:waiting for change to take effect"
sleep 5

echo "I:checking former standby key has now signed fully ($n)"
ret=0
$DIG $DIGOPTS txt . @10.53.0.1 > dig.out.ns1.test$n || ret=1
grep 'RRSIG.*'" $newid "'\. ' dig.out.ns1.test$n > /dev/null || ret=1
grep 'RRSIG.*'" $oldid "'\. ' dig.out.ns1.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

851 852 853 854 855 856 857 858
echo "I:checking SOA serial number has been incremented ($n)"
ret=0
newserial=`$DIG $DIGOPTS +short soa . @10.53.0.1 | awk '{print $3}'`
[ "$newserial" != "$oldserial" ] || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912
echo "I:checking delayed key publication/activation ($n)"
ret=0
zsk=`cat delayzsk.key`
ksk=`cat delayksk.key`
# publication and activation times should be unset
$SETTIME -K ns3 -pA -pP $zsk | grep -v UNSET > /dev/null 2>&1 && ret=1
$SETTIME -K ns3 -pA -pP $ksk | grep -v UNSET > /dev/null 2>&1 && ret=1
$DIG $DIGOPTS +noall +answer dnskey delay.example. @10.53.0.3 > dig.out.ns3.test$n || ret=1
# DNSKEY not expected:
awk 'BEGIN {r=1} $4=="DNSKEY" {r=0} END {exit r}' dig.out.ns3.test$n && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking scheduled key publication, not activation ($n)"
ret=0
$SETTIME -K ns3 -P now+3s -A none $zsk > /dev/null 2>&1
$SETTIME -K ns3 -P now+3s -A none $ksk > /dev/null 2>&1
$RNDC -c ../common/rndc.conf -s 10.53.0.3 -p 9953 loadkeys delay.example. 2>&1 | sed 's/^/I:ns2 /'

echo "I:waiting for changes to take effect"
sleep 5

$DIG $DIGOPTS +noall +answer dnskey delay.example. @10.53.0.3 > dig.out.ns3.test$n || ret=1
# DNSKEY expected:
awk 'BEGIN {r=1} $4=="DNSKEY" {r=0} END {exit r}' dig.out.ns3.test$n || ret=1
# RRSIG not expected:
awk 'BEGIN {r=1} $4=="RRSIG" {r=0} END {exit r}' dig.out.ns3.test$n && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking scheduled key activation ($n)"
ret=0
$SETTIME -K ns3 -A now+3s $zsk > /dev/null 2>&1
$SETTIME -K ns3 -A now+3s $ksk > /dev/null 2>&1
$RNDC -c ../common/rndc.conf -s 10.53.0.3 -p 9953 loadkeys delay.example. 2>&1 | sed 's/^/I:ns2 /'

echo "I:waiting for changes to take effect"
sleep 5

$DIG $DIGOPTS +noall +answer dnskey delay.example. @10.53.0.3 > dig.out.ns3.1.test$n || ret=1
# DNSKEY expected:
awk 'BEGIN {r=1} $4=="DNSKEY" {r=0} END {exit r}' dig.out.ns3.1.test$n || ret=1
# RRSIG expected:
awk 'BEGIN {r=1} $4=="RRSIG" {r=0} END {exit r}' dig.out.ns3.1.test$n || ret=1
$DIG $DIGOPTS +noall +answer a a.delay.example. @10.53.0.3 > dig.out.ns3.2.test$n || ret=1
# A expected:
awk 'BEGIN {r=1} $4=="A" {r=0} END {exit r}' dig.out.ns3.2.test$n || ret=1
# RRSIG expected:
awk 'BEGIN {r=1} $4=="RRSIG" {r=0} END {exit r}' dig.out.ns3.2.test$n || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`
913

914
echo "I:checking former active key was removed ($n)"
915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934
ret=0
$DIG $DIGOPTS +multi dnskey . @10.53.0.1 > dig.out.ns1.test$n || ret=1
grep '; key id =.*'"$oldid"'$' dig.out.ns1.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking private key file removal caused no immediate harm ($n)"
ret=0
id=`sed 's/^K.+007+0*//' < vanishing.key`
$DIG $DIGOPTS dnskey . @10.53.0.1 > dig.out.ns1.test$n || ret=1
grep 'RRSIG.*'" $id "'\. ' dig.out.ns1.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking revoked key with duplicate key ID (failure expected) ($n)"
lret=0
id=30676
$DIG $DIGOPTS +multi dnskey bar @10.53.0.2 > dig.out.ns2.test$n || lret=1
935
grep '; key id =.*'"$id"'$' dig.out.ns2.test$n > /dev/null || lret=1
936 937 938
$DIG $DIGOPTS dnskey bar @10.53.0.4 > dig.out.ns4.test$n || lret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || lret=1
n=`expr $n + 1`
939
if [ $lret != 0 ]; then echo "I:not yet implemented"; fi
940

941 942 943 944 945 946 947 948 949 950 951 952 953 954
echo "I:checking key event timers are always set ($n)"
# this is a regression test for a bug in which the next key event could
# be scheduled for the present moment, and then never fire.  check for
# visible evidence of this error in the logs:
awk '/next key event/ {if ($1 == $8 && $2 == $9) exit 1}' */named.run || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

# this confirms that key events are never scheduled more than
# 'dnssec-loadkeys-interval' minutes in the future, and that the 
# last event scheduled is precisely that far in the future.
check_interval () {
        awk '/next key event/ {print $2 ":" $9}' $1/named.run |
955 956
	sed 's/\.//g' |
            awk -F: '
957
                     {
Mark Andrews's avatar
Mark Andrews committed
958
                       x = ($6+ $5*60000 + $4*3600000) - ($3+ $2*60000 + $1*3600000);
Mark Andrews's avatar
Mark Andrews committed
959 960 961 962
		       # abs(x) < 500 ms treat as 'now'
		       if (x < 500 && x > -500)
                         x = 0;
		       # convert to seconds
963
		       x = x/1000;
Mark Andrews's avatar
Mark Andrews committed
964
		       # handle end of day roll over
Mark Andrews's avatar
Mark Andrews committed
965 966
		       if (x < 0)
			 x = x + 24*3600;
Mark Andrews's avatar
Mark Andrews committed
967
		       # handle log timestamp being a few milliseconds later
968 969
                       if (x != int(x))
                         x = int(x + 1);
Mark Andrews's avatar
Mark Andrews committed
970
                       if (int(x) > int(interval))
971 972
                         exit (1);
                     }
Mark Andrews's avatar
Mark Andrews committed
973
                     END { if (int(x) != int(interval)) exit(1) }' interval=$2
974 975 976 977 978 979 980 981 982 983 984 985
        return $?
}

echo "I:checking automatic key reloading interval ($n)"
ret=0
check_interval ns1 3600 || ret=1
check_interval ns2 1800 || ret=1
check_interval ns3 600 || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

986 987 988
echo "I:exit status: $status"

exit $status