tests.sh 130 KB
Newer Older
Michael Sawyer's avatar
Michael Sawyer committed
1
#!/bin/sh
Michael Sawyer's avatar
Michael Sawyer committed
2
#
3
# Copyright (C) 2000-2002, 2004-2017  Internet Systems Consortium, Inc. ("ISC")
Mark Andrews's avatar
Mark Andrews committed
4
#
5
6
7
# This Source Code Form is subject to the terms of the Mozilla Public
# License, v. 2.0. If a copy of the MPL was not distributed with this
# file, You can obtain one at http://mozilla.org/MPL/2.0/.
Mark Andrews's avatar
Mark Andrews committed
8

9
10
11
SYSTEMTESTTOP=..
. $SYSTEMTESTTOP/conf.sh

12
status=0
13
n=1
Michael Sawyer's avatar
Michael Sawyer committed
14

15
rm -f dig.out.*
Michael Sawyer's avatar
Michael Sawyer committed
16

17
DIGOPTS="+tcp +noadd +nosea +nostat +nocmd +dnssec -p 5300"
18
DELVOPTS="-a ns1/trusted.conf -p 5300"
Andreas Gustafsson's avatar
Andreas Gustafsson committed
19

20
21
22
23
24
# convert private-type records to readable form
showprivate () {
    echo "-- $@ --"
    $DIG $DIGOPTS +nodnssec +short @$2 -t type65534 $1 | cut -f3 -d' ' |
        while read record; do
Mark Andrews's avatar
Mark Andrews committed
25
            $PERL -e 'my $rdata = pack("H*", @ARGV[0]);
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
                die "invalid record" unless length($rdata) == 5;
                my ($alg, $key, $remove, $complete) = unpack("CnCC", $rdata);
                my $action = "signing";
                $action = "removing" if $remove;
                my $state = " (incomplete)";
                $state = " (complete)" if $complete;
                print ("$action: alg: $alg, key: $key$state\n");' $record
        done
}

# check that signing records are marked as complete
checkprivate () {
    ret=0
    x=`showprivate "$@"`
    echo $x | grep incomplete >&- 2>&- && ret=1
    [ $ret = 1 ] && {
        echo "$x"
        echo "I:failed"
    }
    return $ret
}

48
49
# check that a zone file is raw format, version 0
israw0 () {
Mark Andrews's avatar
Mark Andrews committed
50
    cat $1 | $PERL -e 'binmode STDIN;
Mark Andrews's avatar
Mark Andrews committed
51
		      read(STDIN, $input, 8);
52
53
54
55
56
57
58
                      ($style, $version) = unpack("NN", $input);
                      exit 1 if ($style != 2 || $version != 0);'
    return $?
}

# check that a zone file is raw format, version 1
israw1 () {
Mark Andrews's avatar
Mark Andrews committed
59
    cat $1 | $PERL -e 'binmode STDIN;
Mark Andrews's avatar
Mark Andrews committed
60
		      read(STDIN, $input, 8);
61
62
63
64
65
                      ($style, $version) = unpack("NN", $input);
                      exit 1 if ($style != 2 || $version != 1);'
    return $?
}

66
67
68
69
70
# strip NS and RRSIG NS from input
stripns () {
    awk '($4 == "NS") || ($4 == "RRSIG" && $5 == "NS") { next} { print }' $1
}

Michael Sawyer's avatar
Michael Sawyer committed
71
# Check the example. domain
72
73

echo "I:checking that zone transfer worked ($n)"
74
75
76
77
78
79
80
81
82
83
for i in 1 2 3 4 5 6 7 8 9
do
	ret=0
	$DIG $DIGOPTS a.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
	$DIG $DIGOPTS a.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
	$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns3.test$n > /dev/null || ret=1
	[ $ret = 0 ] && break
	sleep 1
done
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns3.test$n > /dev/null || ret=1
Brian Wellington's avatar
Brian Wellington committed
84
n=`expr $n + 1`
85
86
87
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

88
89
90
91
92
93
94
95
96
97
98
99
# test AD bit:
#  - dig +adflag asks for authentication (ad in response)
echo "I:checking AD bit asking for validation ($n)"
ret=0
$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag a.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag a.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

100
101
102
103
104
105
106
107
108
109
110
# test AD bit:
#  - dig +noadflag 
echo "I:checking that AD is not set without +adflag or +dnssec ($n)"
ret=0
$DIG $DIGOPTS +noauth +noadd +nodnssec +noadflag a.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth +noadd +nodnssec +noadflag a.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`
111

112
113
114
115
116
117
118
119
echo "I:checking for AD in authoritative answer ($n)"
ret=0
$DIG $DIGOPTS a.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns2.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

120
echo "I:checking positive validation NSEC ($n)"
121
122
123
124
ret=0
$DIG $DIGOPTS +noauth a.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth a.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
125
126
127
128
129
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

130
if [ -x ${DELV} ] ; then
131
132
   ret=0
   echo "I:checking postive validation NSEC using dns_client ($n)"
133
134
135
   $DELV $DELVOPTS @10.53.0.4 a a.example > delv.out$n || ret=1
   grep "a.example..*10.0.0.1" delv.out$n > /dev/null || ret=1
   grep "a.example..*.RRSIG.A 3 2 300 .*" delv.out$n > /dev/null || ret=1
136
137
138
139
140
   n=`expr $n + 1`
   if [ $ret != 0 ]; then echo "I:failed"; fi
   status=`expr $status + $ret`
fi

141
142
143
144
145
146
147
148
149
150
151
152
echo "I:checking positive validation NSEC3 ($n)"
ret=0
$DIG $DIGOPTS +noauth a.nsec3.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

153
if [ -x ${DELV} ] ; then
154
155
   ret=0
   echo "I:checking positive validation NSEC3 using dns_client ($n)"
156
157
158
   $DELV $DELVOPTS @10.53.0.4 a a.nsec3.example > delv.out$n || ret=1
   grep "a.nsec3.example..*10.0.0.1" delv.out$n > /dev/null || ret=1
   grep "a.nsec3.example..*RRSIG.A 7 3 300.*" delv.out$n > /dev/null || ret=1
159
160
161
162
163
   n=`expr $n + 1`
   if [ $ret != 0 ]; then echo "I:failed"; fi
   status=`expr $status + $ret`
fi

164
165
166
167
168
169
170
171
172
173
174
175
echo "I:checking positive validation OPTOUT ($n)"
ret=0
$DIG $DIGOPTS +noauth a.optout.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

176
if [ -x ${DELV} ] ; then
177
178
   ret=0
   echo "I:checking positive validation OPTOUT using dns_client ($n)"
179
180
181
   $DELV $DELVOPTS @10.53.0.4 a a.optout.example > delv.out$n || ret=1
   grep "a.optout.example..*10.0.0.1" delv.out$n > /dev/null || ret=1
   grep "a.optout.example..*RRSIG.A 7 3 300.*" delv.out$n > /dev/null || ret=1
182
183
184
185
186
   n=`expr $n + 1`
   if [ $ret != 0 ]; then echo "I:failed"; fi
   status=`expr $status + $ret`
fi

187
echo "I:checking positive wildcard validation NSEC ($n)"
188
ret=0
189
$DIG $DIGOPTS a.wild.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
190
$DIG $DIGOPTS a.wild.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
191
192
193
194
195
stripns dig.out.ns3.test$n > dig.out.ns3.stripped.test$n
stripns dig.out.ns4.test$n > dig.out.ns4.stripped.test$n
$PERL ../digcomp.pl dig.out.ns3.stripped.test$n dig.out.ns4.stripped.test$n || ret=1
grep "\*\.wild\.example\..*RRSIG	NSEC" dig.out.ns4.test$n > /dev/null || ret=1
grep "\*\.wild\.example\..*NSEC	z\.example" dig.out.ns4.test$n > /dev/null || ret=1
196
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
197
198
199
200
201
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

202
if [ -x ${DELV} ] ; then
203
204
   ret=0
   echo "I:checking positive wildcard validation NSEC using dns_client ($n)"
205
206
207
   $DELV $DELVOPTS @10.53.0.4 a a.wild.example > delv.out$n || ret=1
   grep "a.wild.example..*10.0.0.27" delv.out$n > /dev/null || ret=1
   grep "a.wild.example..*RRSIG.A 3 2 300.*" delv.out$n > /dev/null || ret=1
208
209
210
211
212
   n=`expr $n + 1`
   if [ $ret != 0 ]; then echo "I:failed"; fi
   status=`expr $status + $ret`
fi

213
214
215
216
217
218
219
220
221
222
223
echo "I:checking positive wildcard answer NSEC3 ($n)"
ret=0
$DIG $DIGOPTS a.wild.nsec3.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
grep "AUTHORITY: 4," dig.out.ns3.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking positive wildcard answer NSEC3 ($n)"
ret=0
224
225
226
$DIG $DIGOPTS a.wild.nsec3.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
grep "AUTHORITY: 4," dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
227
228
229
230
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

231
232
233
234
echo "I:checking positive wildcard validation NSEC3 ($n)"
ret=0
$DIG $DIGOPTS a.wild.nsec3.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS a.wild.nsec3.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
235
236
237
stripns dig.out.ns3.test$n > dig.out.ns3.stripped.test$n
stripns dig.out.ns4.test$n > dig.out.ns4.stripped.test$n
$PERL ../digcomp.pl dig.out.ns3.stripped.test$n dig.out.ns4.stripped.test$n || ret=1
238
239
240
241
242
243
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

244
if [ -x ${DELV} ] ; then
245
246
   ret=0
   echo "I:checking positive wildcard validation NSEC3 using dns_client ($n)"
247
248
249
   $DELV $DELVOPTS @10.53.0.4 a a.wild.nsec3.example > delv.out$n || ret=1
   grep "a.wild.nsec3.example..*10.0.0.6" delv.out$n > /dev/null || ret=1
   grep "a.wild.nsec3.example..*RRSIG.A 7 3 300.*" delv.out$n > /dev/null || ret=1
250
251
252
253
254
   n=`expr $n + 1`
   if [ $ret != 0 ]; then echo "I:failed"; fi
   status=`expr $status + $ret`
fi

255
256
257
258
259
260
echo "I:checking positive wildcard validation OPTOUT ($n)"
ret=0
$DIG $DIGOPTS a.wild.optout.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS a.wild.optout.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
261
262
263
stripns dig.out.ns3.test$n > dig.out.ns3.stripped.test$n
stripns dig.out.ns4.test$n > dig.out.ns4.stripped.test$n
$PERL ../digcomp.pl dig.out.ns3.stripped.test$n dig.out.ns4.stripped.test$n || ret=1
264
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
265
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
266
267
268
269
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

270
if [ -x ${DELV} ] ; then
271
272
   ret=0
   echo "I:checking positive wildcard validation OPTOUT using dns_client ($n)"
273
274
275
   $DELV $DELVOPTS @10.53.0.4 a a.wild.optout.example > delv.out$n || ret=1
   grep "a.wild.optout.example..*10.0.0.6" delv.out$n > /dev/null || ret=1
   grep "a.wild.optout.example..*RRSIG.A 7 3 300.*" delv.out$n > /dev/null || ret=1
276
277
278
279
280
   n=`expr $n + 1`
   if [ $ret != 0 ]; then echo "I:failed"; fi
   status=`expr $status + $ret`
fi

281
echo "I:checking negative validation NXDOMAIN NSEC ($n)"
282
283
284
285
286
ret=0
$DIG $DIGOPTS +noauth q.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth q.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
287
288
289
290
291
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

292
if [ -x ${DELV} ] ; then
293
294
   ret=0
   echo "I:checking negative validation NXDOMAIN NSEC using dns_client ($n)"
295
296
   $DELV $DELVOPTS @10.53.0.4 a q.example > delv.out$n 2>&1 || ret=1
   grep "resolution failed: ncache nxdomain" delv.out$n > /dev/null || ret=1
297
298
299
300
301
   n=`expr $n + 1`
   if [ $ret != 0 ]; then echo "I:failed"; fi
   status=`expr $status + $ret`
fi

302
303
304
305
306
307
308
309
310
311
312
313
314
echo "I:checking negative validation NXDOMAIN NSEC3 ($n)"
ret=0
$DIG $DIGOPTS +noauth q.nsec3.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth q.nsec3.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

315
if [ -x ${DELV} ] ; then
316
317
   ret=0
   echo "I:checking negative validation NXDOMAIN NSEC3 using dns_client ($n)"
318
319
   $DELV $DELVOPTS @10.53.0.4 a q.nsec3.example > delv.out$n 2>&1 || ret=1
   grep "resolution failed: ncache nxdomain" delv.out$n > /dev/null || ret=1
320
321
322
323
324
   n=`expr $n + 1`
   if [ $ret != 0 ]; then echo "I:failed"; fi
   status=`expr $status + $ret`
fi

325
326
327
328
329
330
331
332
333
334
335
336
337
338
echo "I:checking negative validation NXDOMAIN OPTOUT ($n)"
ret=0
$DIG $DIGOPTS +noauth q.optout.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth q.optout.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

339
if [ -x ${DELV} ] ; then
340
341
   ret=0
   echo "I:checking negative validation NXDOMAIN OPTOUT using dns_client ($n)"
342
343
   $DELV $DELVOPTS @10.53.0.4 a q.optout.example > delv.out$n 2>&1 || ret=1
   grep "resolution failed: ncache nxdomain" delv.out$n > /dev/null || ret=1
344
345
346
347
348
   n=`expr $n + 1`
   if [ $ret != 0 ]; then echo "I:failed"; fi
   status=`expr $status + $ret`
fi

349
350
351
352
353
354
355
356
357
358
359
360
echo "I:checking negative validation NODATA NSEC ($n)"
ret=0
$DIG $DIGOPTS +noauth a.example. @10.53.0.2 txt > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth a.example. @10.53.0.4 txt > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "ANSWER: 0" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

361
if [ -x ${DELV} ] ; then
362
363
   ret=0
   echo "I:checking negative validation NODATA OPTOUT using dns_client ($n)"
364
365
   $DELV $DELVOPTS @10.53.0.4 txt a.example > delv.out$n 2>&1 || ret=1
   grep "resolution failed: ncache nxrrset" delv.out$n > /dev/null || ret=1
366
367
368
369
370
   n=`expr $n + 1`
   if [ $ret != 0 ]; then echo "I:failed"; fi
   status=`expr $status + $ret`
fi

371
372
373
374
375
376
377
378
379
380
381
382
383
384
echo "I:checking negative validation NODATA NSEC3 ($n)"
ret=0
$DIG $DIGOPTS +noauth a.nsec3.example. \
	@10.53.0.3 txt > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.example. \
	@10.53.0.4 txt > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "ANSWER: 0" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

385
if [ -x ${DELV} ] ; then
386
387
   ret=0
   echo "I:checking negative validation NODATA NSEC3 using dns_client ($n)"
388
389
   $DELV $DELVOPTS @10.53.0.4 txt a.nsec3.example > delv.out$n 2>&1 || ret=1
   grep "resolution failed: ncache nxrrset" delv.out$n > /dev/null || ret=1
390
391
392
393
394
   n=`expr $n + 1`
   if [ $ret != 0 ]; then echo "I:failed"; fi
   status=`expr $status + $ret`
fi

395
396
397
398
399
400
401
402
403
404
echo "I:checking negative validation NODATA OPTOUT ($n)"
ret=0
$DIG $DIGOPTS +noauth a.optout.example. \
	@10.53.0.3 txt > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.example. \
	@10.53.0.4 txt > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "ANSWER: 0" dig.out.ns4.test$n > /dev/null || ret=1
Brian Wellington's avatar
Brian Wellington committed
405
n=`expr $n + 1`
406
407
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`
408

409
if [ -x ${DELV} ] ; then
410
411
   ret=0
   echo "I:checking negative validation NODATA OPTOUT using dns_client ($n)"
412
413
   $DELV $DELVOPTS @10.53.0.4 txt a.optout.example > delv.out$n 2>&1 || ret=1
   grep "resolution failed: ncache nxrrset" delv.out$n > /dev/null || ret=1
414
415
416
417
418
   n=`expr $n + 1`
   if [ $ret != 0 ]; then echo "I:failed"; fi
   status=`expr $status + $ret`
fi

419
echo "I:checking negative wildcard validation NSEC ($n)"
420
421
422
423
424
ret=0
$DIG $DIGOPTS b.wild.example. @10.53.0.2 txt > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS b.wild.example. @10.53.0.4 txt > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
425
426
427
428
429
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

430
if [ -x ${DELV} ] ; then
431
432
   ret=0
   echo "I:checking negative wildcard validation NSEC using dns_client ($n)"
433
434
   $DELV $DELVOPTS @10.53.0.4 txt b.wild.example > delv.out$n 2>&1 || ret=1
   grep "resolution failed: ncache nxrrset" delv.out$n > /dev/null || ret=1
435
436
437
438
439
   n=`expr $n + 1`
   if [ $ret != 0 ]; then echo "I:failed"; fi
   status=`expr $status + $ret`
fi

440
441
442
443
444
445
446
447
448
449
echo "I:checking negative wildcard validation NSEC3 ($n)"
ret=0
$DIG $DIGOPTS b.wild.nsec3.example. @10.53.0.3 txt > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS b.wild.nsec3.example. @10.53.0.4 txt > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

450
if [ -x ${DELV} ] ; then
451
452
   ret=0
   echo "I:checking negative wildcard validation NSEC3 using dns_client ($n)"
453
454
   $DELV $DELVOPTS @10.53.0.4 txt b.wild.nsec3.example > delv.out$n 2>&1 || ret=1
   grep "resolution failed: ncache nxrrset" delv.out$n > /dev/null || ret=1
455
456
457
458
459
   n=`expr $n + 1`
   if [ $ret != 0 ]; then echo "I:failed"; fi
   status=`expr $status + $ret`
fi

460
461
462
463
464
465
466
467
468
469
echo "I:checking negative wildcard validation OPTOUT ($n)"
ret=0
$DIG $DIGOPTS b.wild.optout.example. \
	@10.53.0.3 txt > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS b.wild.optout.example. \
	@10.53.0.4 txt > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
470
471
472
473
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

474
if [ -x ${DELV} ] ; then
475
476
   ret=0
   echo "I:checking negative wildcard validation OPTOUT using dns_client ($n)"
477
478
   $DELV $DELVOPTS @10.53.0.4 txt b.optout.nsec3.example > delv.out$n 2>&1 || ret=1
   grep "resolution failed: ncache nxrrset" delv.out$n > /dev/null || ret=1
479
480
481
482
483
   n=`expr $n + 1`
   if [ $ret != 0 ]; then echo "I:failed"; fi
   status=`expr $status + $ret`
fi

484
485
# Check the insecure.example domain

486
echo "I:checking 1-server insecurity proof NSEC ($n)"
487
ret=0
488
489
$DIG $DIGOPTS +noauth a.insecure.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.insecure.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
490
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
491
492
493
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
Brian Wellington's avatar
Brian Wellington committed
494
n=`expr $n + 1`
495
496
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`
497

498
if [ -x ${DELV} ] ; then
499
500
   ret=0
   echo "I:checking 1-server insecurity proof NSEC using dns_client ($n)"
501
502
   $DELV $DELVOPTS @10.53.0.4 a a.insecure.example > delv.out$n || ret=1
   grep "a.insecure.example..*10.0.0.1" delv.out$n > /dev/null || ret=1
503
504
505
506
507
   n=`expr $n + 1`
   if [ $ret != 0 ]; then echo "I:failed"; fi
   status=`expr $status + $ret`
fi

508
509
510
511
512
513
514
515
516
517
518
519
echo "I:checking 1-server insecurity proof NSEC3 ($n)"
ret=0
$DIG $DIGOPTS +noauth a.insecure.nsec3.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.insecure.nsec3.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

520
if [ -x ${DELV} ] ; then
521
522
   ret=0
   echo "I:checking 1-server insecurity proof NSEC3 using dns_client ($n)"
523
524
   $DELV $DELVOPTS @10.53.0.4 a a.insecure.nsec3.example > delv.out$n || ret=1
   grep "a.insecure.nsec3.example..*10.0.0.1" delv.out$n > /dev/null || ret=1
525
526
527
528
529
   n=`expr $n + 1`
   if [ $ret != 0 ]; then echo "I:failed"; fi
   status=`expr $status + $ret`
fi

530
531
532
533
534
535
536
537
538
539
540
541
echo "I:checking 1-server insecurity proof OPTOUT ($n)"
ret=0
$DIG $DIGOPTS +noauth a.insecure.optout.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.insecure.optout.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

542
if [ -x ${DELV} ] ; then
543
544
   ret=0
   echo "I:checking 1-server insecurity proof OPTOUT using dns_client ($n)"
545
546
   $DELV $DELVOPTS @10.53.0.4 a a.insecure.optout.example > delv.out$n || ret=1
   grep "a.insecure.optout.example..*10.0.0.1" delv.out$n > /dev/null || ret=1
547
548
549
550
551
   n=`expr $n + 1`
   if [ $ret != 0 ]; then echo "I:failed"; fi
   status=`expr $status + $ret`
fi

552
echo "I:checking 1-server negative insecurity proof NSEC ($n)"
553
554
555
556
557
558
559
560
561
562
563
564
565
ret=0
$DIG $DIGOPTS q.insecure.example. a @10.53.0.3 \
	> dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS q.insecure.example. a @10.53.0.4 \
	> dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

566
if [ -x ${DELV} ] ; then
567
568
   ret=0
   echo "I:checking 1-server negative insecurity proof NSEC using dns_client ($n)"
569
570
   $DELV $DELVOPTS @10.53.0.4 a q.insecure.example > delv.out$n 2>&1 || ret=1
   grep "resolution failed: ncache nxdomain" delv.out$n > /dev/null || ret=1
571
572
573
574
575
   n=`expr $n + 1`
   if [ $ret != 0 ]; then echo "I:failed"; fi
   status=`expr $status + $ret`
fi

576
577
578
579
580
581
582
583
584
585
586
587
588
589
echo "I:checking 1-server negative insecurity proof NSEC3 ($n)"
ret=0
$DIG $DIGOPTS q.insecure.nsec3.example. a @10.53.0.3 \
	> dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS q.insecure.nsec3.example. a @10.53.0.4 \
	> dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

590
if [ -x ${DELV} ] ; then
591
592
   ret=0
   echo "I:checking 1-server negative insecurity proof NSEC3 using dns_client ($n)"
593
594
   $DELV $DELVOPTS @10.53.0.4 a q.insecure.nsec3.example > delv.out$n 2>&1 || ret=1
   grep "resolution failed: ncache nxdomain" delv.out$n > /dev/null || ret=1
595
596
597
598
599
   n=`expr $n + 1`
   if [ $ret != 0 ]; then echo "I:failed"; fi
   status=`expr $status + $ret`
fi

600
601
602
603
604
605
606
607
608
609
610
611
612
613
echo "I:checking 1-server negative insecurity proof OPTOUT ($n)"
ret=0
$DIG $DIGOPTS q.insecure.optout.example. a @10.53.0.3 \
	> dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS q.insecure.optout.example. a @10.53.0.4 \
	> dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

614
if [ -x ${DELV} ] ; then
615
616
   ret=0
   echo "I:checking 1-server negative insecurity proof OPTOUT using dns_client ($n)"
617
618
   $DELV $DELVOPTS @10.53.0.4 a q.insecure.optout.example > delv.out$n 2>&1 || ret=1
   grep "resolution failed: ncache nxdomain" delv.out$n > /dev/null || ret=1
619
620
621
622
623
   n=`expr $n + 1`
   if [ $ret != 0 ]; then echo "I:failed"; fi
   status=`expr $status + $ret`
fi

624
echo "I:checking 1-server negative insecurity proof with SOA hack NSEC ($n)"
625
626
627
628
629
630
631
ret=0
$DIG $DIGOPTS r.insecure.example. soa @10.53.0.3 \
	> dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS r.insecure.example. soa @10.53.0.4 \
	> dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
grep "0	IN	SOA" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking 1-server negative insecurity proof with SOA hack NSEC3 ($n)"
ret=0
$DIG $DIGOPTS r.insecure.nsec3.example. soa @10.53.0.3 \
	> dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS r.insecure.nsec3.example. soa @10.53.0.4 \
	> dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
grep "0	IN	SOA" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking 1-server negative insecurity proof with SOA hack OPTOUT ($n)"
ret=0
$DIG $DIGOPTS r.insecure.optout.example. soa @10.53.0.3 \
	> dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS r.insecure.optout.example. soa @10.53.0.4 \
	> dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
grep "0	IN	SOA" dig.out.ns4.test$n > /dev/null || ret=1
663
664
665
666
667
668
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

669
670
# Check the secure.example domain

671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
echo "I:checking multi-stage positive validation NSEC/NSEC ($n)"
ret=0
$DIG $DIGOPTS +noauth a.secure.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.secure.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking multi-stage positive validation NSEC/NSEC3 ($n)"
ret=0
$DIG $DIGOPTS +noauth a.nsec3.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking multi-stage positive validation NSEC/OPTOUT ($n)"
698
ret=0
699
700
701
702
$DIG $DIGOPTS +noauth a.optout.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
703
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking multi-stage positive validation NSEC3/NSEC ($n)"
ret=0
$DIG $DIGOPTS +noauth a.secure.nsec3.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.secure.nsec3.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking multi-stage positive validation NSEC3/NSEC3 ($n)"
ret=0
$DIG $DIGOPTS +noauth a.nsec3.nsec3.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.nsec3.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking multi-stage positive validation NSEC3/OPTOUT ($n)"
ret=0
$DIG $DIGOPTS +noauth a.optout.nsec3.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.nsec3.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking multi-stage positive validation OPTOUT/NSEC ($n)"
ret=0
$DIG $DIGOPTS +noauth a.secure.optout.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.secure.optout.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking multi-stage positive validation OPTOUT/NSEC3 ($n)"
ret=0
$DIG $DIGOPTS +noauth a.nsec3.optout.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.optout.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking multi-stage positive validation OPTOUT/OPTOUT ($n)"
ret=0
$DIG $DIGOPTS +noauth a.optout.optout.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.optout.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
783
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
Brian Wellington's avatar
Brian Wellington committed
784
n=`expr $n + 1`
785
786
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`
787

788
789
790
791
792
793
794
795
796
797
798
799
800
echo "I:checking empty NODATA OPTOUT ($n)"
ret=0
$DIG $DIGOPTS +noauth empty.optout.example. \
	@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth empty.optout.example. \
	@10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
#grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

801
802
# Check the bogus domain

803
echo "I:checking failed validation ($n)"
804
805
ret=0
$DIG $DIGOPTS a.bogus.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
806
grep "SERVFAIL" dig.out.ns4.test$n > /dev/null || ret=1
Brian Wellington's avatar
Brian Wellington committed
807
n=`expr $n + 1`
808
809
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`
810

811
if [ -x ${DELV} ] ; then
812
813
   ret=0
   echo "I:checking failed validation using dns_client ($n)"
814
815
   $DELV $DELVOPTS +cd @10.53.0.4 a a.bogus.example > delv.out$n 2>&1 || ret=1
   grep "resolution failed: RRSIG failed to verify" delv.out$n > /dev/null || ret=1
816
817
818
819
820
   n=`expr $n + 1`
   if [ $ret != 0 ]; then echo "I:failed"; fi
   status=`expr $status + $ret`
fi

821
# Try validating with a bad trusted key.
Andreas Gustafsson's avatar
Andreas Gustafsson committed
822
823
# This should fail.

824
echo "I:checking that validation fails with a misconfigured trusted key ($n)"
825
ret=0
826
$DIG $DIGOPTS example. soa @10.53.0.5 > dig.out.ns5.test$n || ret=1
827
grep "SERVFAIL" dig.out.ns5.test$n > /dev/null || ret=1
Brian Wellington's avatar
Brian Wellington committed
828
n=`expr $n + 1`
829
830
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`
Brian Wellington's avatar
Brian Wellington committed
831

832
833
834
835
836
837
838
839
echo "I:checking that negative validation fails with a misconfigured trusted key ($n)"
ret=0
$DIG $DIGOPTS example. ptr @10.53.0.5 > dig.out.ns5.test$n || ret=1
grep "SERVFAIL" dig.out.ns5.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

840
841
842
843
844
845
846
847
echo "I:checking that insecurity proofs fail with a misconfigured trusted key ($n)"
ret=0
$DIG $DIGOPTS a.insecure.example. a @10.53.0.5 > dig.out.ns5.test$n || ret=1
grep "SERVFAIL" dig.out.ns5.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

848
849
850
851
852
853
854
855
echo "I:checking that validation fails when key record is missing ($n)"
ret=0
$DIG $DIGOPTS a.b.keyless.example. a @10.53.0.4 > dig.out.ns4.test$n || ret=1
grep "SERVFAIL" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

856
if [ -x ${DELV} ] ; then
857
858
   ret=0
   echo "I:checking that validation fails when key record is missing using dns_client ($n)"
859
860
   $DELV $DELVOPTS +cd @10.53.0.4 a a.b.keyless.example > delv.out$n 2>&1 || ret=1
   grep "resolution failed: broken trust chain" delv.out$n > /dev/null || ret=1
861
862
863
864
865
   n=`expr $n + 1`
   if [ $ret != 0 ]; then echo "I:failed"; fi
   status=`expr $status + $ret`
fi

866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
echo "I:checking that validation succeeds when a revoked key is encountered ($n)"
ret=0
$DIG $DIGOPTS revkey.example soa @10.53.0.4 > dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags: .* ad" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

if [ -x ${DELV} ] ; then
   ret=0
   echo "I:checking that validation succeeds when a revoked key is encountered using dns_client ($n)"
   $DELV $DELVOPTS +cd @10.53.0.4 soa revkey.example > delv.out$n 2>&1 || ret=1
   grep "fully validated" delv.out$n > /dev/null || ret=1
   n=`expr $n + 1`
   if [ $ret != 0 ]; then echo "I:failed"; fi
   status=`expr $status + $ret`
fi

885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
echo "I:Checking that a bad CNAME signature is caught after a +CD query ($n)"
ret=0
#prime
$DIG $DIGOPTS +cd bad-cname.example. @10.53.0.4 > dig.out.ns4.prime$n || ret=1
#check: requery with +CD.  pending data should be returned even if it's bogus
expect="a.example.
10.0.0.1"
ans=`$DIG $DIGOPTS +cd +nodnssec +short bad-cname.example. @10.53.0.4` || ret=1
test "$ans" = "$expect" || ret=1
test $ret = 0 || echo I:failed, got "'""$ans""'", expected "'""$expect""'"
#check: requery without +CD.  bogus cached data should be rejected.
$DIG $DIGOPTS +nodnssec bad-cname.example. @10.53.0.4 > dig.out.ns4.test$n || ret=1
grep "SERVFAIL" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:Checking that a bad DNAME signature is caught after a +CD query ($n)"
ret=0
#prime
$DIG $DIGOPTS +cd a.bad-dname.example. @10.53.0.4 > dig.out.ns4.prime$n || ret=1
#check: requery with +CD.  pending data should be returned even if it's bogus
expect="example.
a.example.
10.0.0.1"
ans=`$DIG $DIGOPTS +cd +nodnssec +short a.bad-dname.example. @10.53.0.4` || ret=1
test "$ans" = "$expect" || ret=1
test $ret = 0 || echo I:failed, got "'""$ans""'", expected "'""$expect""'"
#check: requery without +CD.  bogus cached data should be rejected.
$DIG $DIGOPTS +nodnssec a.bad-dname.example. @10.53.0.4 > dig.out.ns4.test$n || ret=1
grep "SERVFAIL" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

Brian Wellington's avatar
Brian Wellington committed
920
921
# Check the insecure.secure.example domain (insecurity proof)

922
echo "I:checking 2-server insecurity proof ($n)"
923
ret=0
924
$DIG $DIGOPTS +noauth a.insecure.secure.example. @10.53.0.2 a \
925
	> dig.out.ns2.test$n || ret=1
926
$DIG $DIGOPTS +noauth a.insecure.secure.example. @10.53.0.4 a \
927
	> dig.out.ns4.test$n || ret=1
928
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
929
930
931
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
Brian Wellington's avatar
Brian Wellington committed
932
n=`expr $n + 1`
933
934
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`
Brian Wellington's avatar
Brian Wellington committed
935
936
937

# Check a negative response in insecure.secure.example

938
echo "I:checking 2-server insecurity proof with a negative answer ($n)"
939
ret=0
Brian Wellington's avatar
Brian Wellington committed
940
$DIG $DIGOPTS q.insecure.secure.example. @10.53.0.2 a > dig.out.ns2.test$n \
941
	|| ret=1
Brian Wellington's avatar
Brian Wellington committed
942
$DIG $DIGOPTS q.insecure.secure.example. @10.53.0.4 a > dig.out.ns4.test$n \
943
944
	|| ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
945
946
947
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
Brian Wellington's avatar
Brian Wellington committed
948
n=`expr $n + 1`
949
950
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`
Andreas Gustafsson's avatar
Andreas Gustafsson committed
951

952
953
954
955
956
957
958
959
960
961
962
963
964
965
echo "I:checking 2-server insecurity proof with a negative answer and SOA hack ($n)"
ret=0
$DIG $DIGOPTS r.insecure.secure.example. @10.53.0.2 soa > dig.out.ns2.test$n \
	|| ret=1
$DIG $DIGOPTS r.insecure.secure.example. @10.53.0.4 soa > dig.out.ns4.test$n \
	|| ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

966
967
# Check that the query for a security root is successful and has ad set

968
echo "I:checking security root query ($n)"
969
970
971
972
973
974
975
976
ret=0
$DIG $DIGOPTS . @10.53.0.4 key > dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
# Check that the setting the cd bit works

echo "I:checking cd bit on a positive answer ($n)"
ret=0
$DIG $DIGOPTS +noauth example. soa @10.53.0.4 \
	> dig.out.ns4.test$n || ret=1
$DIG $DIGOPTS +noauth +cdflag example. soa @10.53.0.5 \
	> dig.out.ns5.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns4.test$n dig.out.ns5.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns5.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking cd bit on a negative answer ($n)"
ret=0
$DIG $DIGOPTS q.example. soa @10.53.0.4 > dig.out.ns4.test$n || ret=1
$DIG $DIGOPTS +cdflag q.example. soa @10.53.0.5 > dig.out.ns5.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns4.test$n dig.out.ns5.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns5.test$n > /dev/null && ret=1
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking positive validation RSASHA256 NSEC ($n)"
ret=0
$DIG $DIGOPTS +noauth a.rsasha256.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.rsasha256.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking positive validation RSASHA512 NSEC ($n)"
ret=0
$DIG $DIGOPTS +noauth a.rsasha512.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.rsasha512.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking positive validation with KSK-only DNSKEY signature ($n)"
ret=0
$DIG $DIGOPTS +noauth a.kskonly.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.kskonly.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking cd bit on a query that should fail ($n)"
ret=0
$DIG $DIGOPTS a.bogus.example. soa @10.53.0.4 \
	> dig.out.ns4.test$n || ret=1
$DIG $DIGOPTS +cdflag a.bogus.example. soa @10.53.0.5 \
	> dig.out.ns5.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns4.test$n dig.out.ns5.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns5.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking cd bit on an insecurity proof ($n)"
ret=0
$DIG $DIGOPTS +noauth a.insecure.example. soa @10.53.0.4 \
	> dig.out.ns4.test$n || ret=1
$DIG $DIGOPTS +noauth +cdflag a.insecure.example. soa @10.53.0.5 \
	> dig.out.ns5.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns4.test$n dig.out.ns5.test$n || ret=1
1056
1057
1058
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - these are looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
1059
1060
1061
1062
1063
1064
1065
grep "flags:.*ad.*QUERY" dig.out.ns5.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking cd bit on a negative insecurity proof ($n)"
ret=0
1066
$DIG $DIGOPTS q.insecure.example. a @10.53.0.4 \
1067
	> dig.out.ns4.test$n || ret=1
1068
$DIG $DIGOPTS +cdflag q.insecure.example. a @10.53.0.5 \
1069
1070
	> dig.out.ns5.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns4.test$n dig.out.ns5.test$n || ret=1
1071
1072
1073
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - these are looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
1074
1075
1076
1077
1078
grep "flags:.*ad.*QUERY" dig.out.ns5.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
echo "I:checking that validation of an ANY query works ($n)"
ret=0
$DIG $DIGOPTS +noauth foo.example. any @10.53.0.2 > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth foo.example. any @10.53.0.4 > dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# 2 records in the zone, 1 NXT, 3 SIGs
grep "ANSWER: 6" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
echo "I:checking that validation of a query returning a CNAME works ($n)"
ret=0
$DIG $DIGOPTS +noauth cname1.example. txt @10.53.0.2 \
	> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth cname1.example. txt @10.53.0.4 \
	> dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# the CNAME & its sig, the TXT and its SIG
grep "ANSWER: 4" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
echo "I:checking that validation of a query returning a DNAME works ($n)"
ret=0
$DIG $DIGOPTS +noauth foo.dname1.example. txt @10.53.0.2 \
	> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth foo.dname1.example. txt @10.53.0.4 \
	> dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# The DNAME & its sig, the TXT and its SIG, and the synthesized CNAME.
# It would be nice to test that the CNAME is being synthesized by the
# recursive server and not cached, but I don't know how.
grep "ANSWER: 5" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
echo "I:checking that validation of an ANY query returning a CNAME works ($n)"
ret=0
$DIG $DIGOPTS +noauth cname2.example. any @10.53.0.2 \
	> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth cname2.example. any @10.53.0.4 \
	> dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# The CNAME, NXT, and their SIGs
grep "ANSWER: 4" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
echo "I:checking that validation of an ANY query returning a DNAME works ($n)"
ret=0
$DIG $DIGOPTS +noauth foo.dname2.example. any @10.53.0.2 \
	> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth foo.dname2.example. any @10.53.0.4 \
	> dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
echo "I:checking that positive validation in a privately secure zone works ($n)"
ret=0
$DIG $DIGOPTS +noauth a.private.secure.example. a @10.53.0.2 \
	> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth a.private.secure.example. a @10.53.0.4 \
	> dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking that negative validation in a privately secure zone works ($n)"
ret=0
$DIG $DIGOPTS +noauth q.private.secure.example. a @10.53.0.2 \
	> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth q.private.secure.example. a @10.53.0.4 \
	> dig.out.ns4.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
echo "I:checking that lookups succeed after disabling a algorithm works ($n)"
ret=0
$DIG $DIGOPTS +noauth example. SOA @10.53.0.2 \
	> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth example. SOA @10.53.0.6 \
	> dig.out.ns6.test$n || ret=1
$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns6.test$n || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns6.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking privately secure to nxdomain works ($n)"
ret=0
$DIG $DIGOPTS +noauth private2secure-nxdomain.private.secure.example. SOA @10.53.0.4 \
	> dig.out.ns4.test$n || ret=1
1192
grep "NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
1193
1194
1195
1196
1197
1198
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

Mark Andrews's avatar
Mark Andrews committed
1199
echo "I:checking privately secure wildcard to nxdomain works ($n)"
1200
1201
1202
ret=0
$DIG $DIGOPTS +noauth a.wild.private.secure.example. SOA @10.53.0.4 \
	> dig.out.ns4.test$n || ret=1
1203
grep "NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
1204
1205
1206
1207
1208
1209
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

1210
1211
1212
echo "I:checking a non-cachable NODATA works ($n)"
ret=0
$DIG $DIGOPTS +noauth a.nosoa.secure.example. txt @10.53.0.7 \
1213
1214
	> dig.out.ns7.test$n || ret=1
grep "AUTHORITY: 0" dig.out.ns7.test$n > /dev/null || ret=1
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
$DIG $DIGOPTS +noauth a.nosoa.secure.example. txt @10.53.0.4 \
	> dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking a non-cachable NXDOMAIN works ($n)"
ret=0
$DIG $DIGOPTS +noauth b.nosoa.secure.example. txt @10.53.0.7 \
1225
1226
	> dig.out.ns7.test$n || ret=1
grep "AUTHORITY: 0" dig.out.ns7.test$n > /dev/null || ret=1
1227
1228
1229
1230
1231
1232
1233
$DIG $DIGOPTS +noauth b.nosoa.secure.example. txt @10.53.0.4 \
	> dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

1234
1235
1236
1237
1238
1239
#
# private.secure.example is served by the same server as its
# grand parent and there is not a secure delegation from secure.example
# to private.secure.example.  In addition secure.example is using a
# algorithm which the validation does not support.
#
1240
1241
1242
1243
1244
echo "I:checking dnssec-lookaside-validation works ($n)"
ret=0
$DIG $DIGOPTS private.secure.example. SOA @10.53.0.6 \
	> dig.out.ns6.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns6.test$n > /dev/null || ret=1
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking that we can load a rfc2535 signed zone ($n)"
ret=0
$DIG $DIGOPTS rfc2535.example. SOA @10.53.0.2 \
	> dig.out.ns2.test$n || ret=1
grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking that we can transfer a rfc2535 signed zone ($n)"
ret=0
$DIG $DIGOPTS rfc2535.example. SOA @10.53.0.3 \
	> dig.out.ns3.test$n || ret=1
grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`
1266

1267
1268
echo "I:checking that we can sign a zone with out-of-zone records ($n)"
ret=0
1269
1270
1271
zone=example
key1=`$KEYGEN -K signer -q -r $RANDFILE -a NSEC3RSASHA1 -b 1024 -n zone $zone`
key2=`$KEYGEN -K signer -q -r $RANDFILE -f KSK -a NSEC3RSASHA1 -b 1024 -n zone $zone`
1272
1273
1274
1275
1276
(
cd signer
cat example.db.in $key1.key $key2.key > example.db
$SIGNER -o example -f example.db example.db > /dev/null 2>&1
) || ret=1
1277
n=`expr $n + 1`
1278
1279
1280
1281
1282
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking that we can sign a zone (NSEC3) with out-of-zone records ($n)"
ret=0
1283
1284
1285
zone=example
key1=`$KEYGEN -K signer -q -r $RANDFILE -a NSEC3RSASHA1 -b 1024 -n zone $zone`
key2=`$KEYGEN -K signer -q -r $RANDFILE -f KSK -a NSEC3RSASHA1 -b 1024 -n zone $zone`
1286
1287
1288
(
cd signer
cat example.db.in $key1.key $key2.key > example.db
Mark Andrews's avatar
Mark Andrews committed
1289
$SIGNER -3 - -H 10 -o example -f example.db example.db > /dev/null 2>&1
1290
awk '/^IQF9LQTLK/ {
1291
		printf("%s", $0);
1292
		while (!index($0, ")")) {
Mark Andrews's avatar
Mark Andrews committed
1293
1294
			if (getline <= 0)
				break;
1295
1296
1297
			printf (" %s", $0); 
		}
		printf("\n");
1298
1299
1300
	}' example.db | sed 's/[ 	][ 	]*/ /g' > nsec3param.out

grep "IQF9LQTLKKNFK0KVIFELRAK4IC4QLTMG.example. 0 IN NSEC3 1 0 10 - ( IQF9LQTLKKNFK0KVIFELRAK4IC4QLTMG A NS SOA RRSIG DNSKEY NSEC3PARAM )" nsec3param.out > /dev/null 
1301
) || ret=1
1302
n=`expr $n + 1`
1303
1304
1305
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

Evan Hunt's avatar
Evan Hunt committed
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
echo "I:checking NSEC3 signing with empty nonterminals above a delegation ($n)"
ret=0
zone=example
key1=`$KEYGEN -K signer -q -r $RANDFILE -a NSEC3RSASHA1 -b 1024 -n zone $zone`
key2=`$KEYGEN -K signer -q -r $RANDFILE -f KSK -a NSEC3RSASHA1 -b 1024 -n zone $zone`
(
cd signer
cat example.db.in $key1.key $key2.key > example3.db
echo "some.empty.nonterminal.nodes.example 60 IN NS ns.example.tld" >> example3.db
$SIGNER -3 - -A -H 10 -o example -f example3.db example3.db > /dev/null 2>&1
awk '/^IQF9LQTLK/ {
		printf("%s", $0);
		while (!index($0, ")")) {
			if (getline <= 0)
				break;
			printf (" %s", $0); 
		}
		printf("\n");
	}' example.db | sed 's/[ 	][ 	]*/ /g' > nsec3param.out

grep "IQF9LQTLKKNFK0KVIFELRAK4IC4QLTMG.example. 0 IN NSEC3 1 0 10 - ( IQF9LQTLKKNFK0KVIFELRAK4IC4QLTMG A NS SOA RRSIG DNSKEY NSEC3PARAM )" nsec3param.out > /dev/null
) || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

1332
1333
echo "I:checking that dnsssec-signzone updates originalttl on ttl changes ($n)"
ret=0
1334
1335
1336
zone=example
key1=`$KEYGEN -K signer -q -r $RANDFILE -a RSASHA1 -b 1024 -n zone $zone`
key2=`$KEYGEN -K signer -q -r $RANDFILE -f KSK -a RSASHA1 -b 1024 -n zone $zone`
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
(
cd signer
cat example.db.in $key1.key $key2.key > example.db
$SIGNER -o example -f example.db.before example.db > /dev/null 2>&1
sed 's/60.IN.SOA./50 IN SOA /' example.db.before > example.db.changed
$SIGNER -o example -f example.db.after example.db.changed > /dev/null 2>&1
)
grep "SOA 5 1 50" signer/example.db.after > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

Mark Andrews's avatar
Mark Andrews committed
1349
echo "I:checking dnssec-signzone keeps valid signatures from removed keys ($n)"
1350
1351
1352
1353
ret=0
zone=example
key1=`$KEYGEN -K signer -q -r $RANDFILE -f KSK -a RSASHA1 -b 1024 -n zone $zone`
key2=`$KEYGEN -K signer -q -r $RANDFILE -a RSASHA1 -b 1024 -n zone $zone`
1354
keyid2=`echo $key2 | sed 's/^Kexample.+005+0*\([0-9]\)/\1/'`
1355
key3=`$KEYGEN -K signer -q -r $RANDFILE -a RSASHA1 -b 1024 -n zone $zone`
1356
keyid3=`echo $key3 | sed 's/^Kexample.+005+0*\([0-9]\)/\1/'`
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
(
cd signer
cat example.db.in $key1.key $key2.key > example.db
$SIGNER -D -o example example.db > /dev/null 2>&1

# now switch out key2 for key3 and resign the zone
cat example.db.in $key1.key $key3.key > example.db
echo '$INCLUDE "example.db.signed"' >> example.db
$SIGNER -D -o example example.db > /dev/null 2>&1
) || ret=1
grep " $keyid2 " signer/example.db.signed > /dev/null 2>&1 || ret=1
grep " $keyid3 " signer/example.db.signed > /dev/null 2>&1 || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

Mark Andrews's avatar
Mark Andrews committed
1373
echo "I:checking dnssec-signzone -R purges signatures from removed keys ($n)"
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
ret=0
(
cd signer
$SIGNER -RD -o example example.db > /dev/null 2>&1
) || ret=1
grep " $keyid2 " signer/example.db.signed > /dev/null 2>&1 && ret=1
grep " $keyid3 " signer/example.db.signed > /dev/null 2>&1 || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

Evan Hunt's avatar
Evan Hunt committed
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
echo "I:checking dnssec-signzone keeps valid signatures from inactive keys ($n)"
ret=0
zone=example
(
cd signer
cp -f example.db.in example.db
$SIGNER -SD -o example example.db > /dev/null 2>&1
echo '$INCLUDE "example.db.signed"' >> example.db
# now retire key2 and resign the zone
$SETTIME -I now $key2 > /dev/null 2>&1
$SIGNER -SD -o example example.db > /dev/null 2>&1
) || ret=1
grep " $keyid2 " signer/example.db.signed > /dev/null 2>&1 || ret=1
grep " $keyid3 " signer/example.db.signed > /dev/null 2>&1 || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

Evan Hunt's avatar
typo    
Evan Hunt committed
1403
echo "I:checking dnssec-signzone -Q purges signatures from inactive keys ($n)"
Evan Hunt's avatar
Evan Hunt committed
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
ret=0
(
cd signer
$SIGNER -SDQ -o example example.db > /dev/null 2>&1
) || ret=1
grep " $keyid2 " signer/example.db.signed > /dev/null 2>&1 && ret=1
grep " $keyid3 " signer/example.db.signed > /dev/null 2>&1 || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
echo "I:checking dnssec-signzone retains unexpired signatures ($n)"
ret=0
(
cd signer
$SIGNER -Sxt -o example example.db > signer.out.1 2>&1
$SIGNER -Sxt -o example -f example.db.signed example.db.signed > signer.out.2 2>&1
) || ret=1
gen1=`awk '/generated/ {print $3}' signer/signer.out.1`
retain1=`awk '/retained/ {print $3}' signer/signer.out.1`
drop1=`awk '/dropped/ {print $3}' signer/signer.out.1`
gen2=`awk '/generated/ {print $3}' signer/signer.out.2`
retain2=`awk '/retained/ {print $3}' signer/signer.out.2`
drop2=`awk '/dropped/ {print $3}' signer/signer.out.2`
[ "$retain2" -eq `expr "$gen1" + "$retain1"` ] || ret=1
[ "$gen2" -eq 0 ] || ret=1
[ "$drop2" -eq 0 ] || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
echo "I:checking dnssec-signzone purges RRSIGs from formerly-owned glue (nsec) ($n)"
ret=0
(
cd signer
# remove NSEC-only keys
rm -f Kexample.+005*
cp -f example.db.in example2.db
cat << EOF >> example2.db
sub1.example. IN A 10.53.0.1
ns.sub2.example. IN A 10.53.0.2
EOF
echo '$INCLUDE "example2.db.signed"' >> example2.db
touch example2.db.signed
$SIGNER -DS -O full -f example2.db.signed -o example example2.db > /dev/null 2>&1
) || ret=1
grep "^sub1\.example\..*RRSIG[ 	]A[ 	]" signer/example2.db.signed > /dev/null 2>&1 || ret=1
grep "^ns\.sub2\.example\..*RRSIG[ 	]A[ 	]" signer/example2.db.signed > /dev/null 2>&1 || ret=1
(
cd signer
cp -f example.db.in example2.db
cat << EOF >> example2.db
sub1.example. IN NS sub1.example.
sub1.example. IN A 10.53.0.1
sub2.example. IN NS ns.sub2.example.
ns.sub2.example. IN A 10.53.0.2
EOF
echo '$INCLUDE "example2.db.signed"' >> example2.db
$SIGNER -DS -O full -f example2.db.signed -o example example2.db > /dev/null 2>&1
) || ret=1
grep "^sub1\.example\..*RRSIG[ 	]A[ 	]" signer/example2.db.signed > /dev/null 2>&1 && ret=1
grep "^ns\.sub2\.example\..*RRSIG[ 	]A[ 	]" signer/example2.db.signed > /dev/null 2>&1 && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking dnssec-signzone purges RRSIGs from formerly-owned glue (nsec3) ($n)"
ret=0
(
cd signer
rm -f example2.db.signed
cp -f example.db.in example2.db
cat << EOF >> example2.db
sub1.example. IN A 10.53.0.1
ns.sub2.example. IN A 10.53.0.2
EOF
echo '$INCLUDE "example2.db.signed"' >> example2.db
touch example2.db.signed
$SIGNER -DS -3 feedabee -O full -f example2.db.signed -o example example2.db > /dev/null 2>&1
) || ret=1
grep "^sub1\.example\..*RRSIG[ 	]A[ 	]" signer/example2.db.signed > /dev/null 2>&1 || ret=1
grep "^ns\.sub2\.example\..*RRSIG[ 	]A[ 	]" signer/example2.db.signed > /dev/null 2>&1 || ret=1
(
cd signer
cp -f example.db.in example2.db
cat << EOF >> example2.db
sub1.example. IN NS sub1.example.
sub1.example. IN A 10.53.0.1
sub2.example. IN NS ns.sub2.example.
ns.sub2.example. IN A 10.53.0.2
EOF
echo '$INCLUDE "example2.db.signed"' >> example2.db
$SIGNER -DS -3 feedabee -O full -f example2.db.signed -o example example2.db > /dev/null 2>&1
) || ret=1
grep "^sub1\.example\..*RRSIG[ 	]A[ 	]" signer/example2.db.signed > /dev/null 2>&1 && ret=1
grep "^ns\.sub2\.example\..*RRSIG[ 	]A[ 	]" signer/example2.db.signed > /dev/null 2>&1 && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

1504
1505
1506
1507
echo "I:checking dnssec-signzone output format ($n)"
ret=0
(
cd signer
1508
1509
1510
1511
1512
$SIGNER -O full -f - -Sxt -o example example.db > signer.out.3 2> /dev/null
$SIGNER -O text -f - -Sxt -o example example.db > signer.out.4 2> /dev/null
$SIGNER -O raw -f signer.out.5 -Sxt -o example example.db > /dev/null 2>&1
$SIGNER -O raw=0 -f signer.out.6 -Sxt -o example example.db > /dev/null 2>&1
$SIGNER -O raw -f - -Sxt -o example example.db > signer.out.7 2> /dev/null
1513
1514
1515
) || ret=1
awk '/IN *SOA/ {if (NF != 11) exit(1)}' signer/signer.out.3 || ret=1
awk '/IN *SOA/ {if (NF != 7) exit(1)}' signer/signer.out.4 || ret=1
1516
1517
1518
israw1 signer/signer.out.5 || ret=1
israw0 signer/signer.out.6 || ret=1
israw1 signer/signer.out.7 || ret=1
1519
n=`expr $n + 1`
Evan Hunt's avatar
Evan Hunt committed
1520
1521
1522
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

Evan Hunt's avatar
Evan Hunt committed
1523
1524
1525
1526
1527
1528
1529
echo "I:checking TTLs are capped by dnssec-signzone -M ($n)"
ret=0
(
cd signer
$SIGNER -O full -f signer.out.8 -S -M 30 -o example example.db > /dev/null 2>&1
) || ret=1
awk '/^;/ { next; } $2 > 30 { exit 1; }' signer/signer.out.8 || ret=1
1530
n=`expr $n + 1`
Evan Hunt's avatar
Evan Hunt committed
1531
1532
1533
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

Evan Hunt's avatar
Evan Hunt committed
1534
1535
1536
1537
1538
1539
echo "I:checking dnssec-signzone -N date ($n)"
ret=0
(
cd signer
$SIGNER -O full -f signer.out.9 -S -N date -o example example2.db > /dev/null 2>&1
) || ret=1
Mark Andrews's avatar
Mark Andrews committed
1540
now=`$PERL -e '@lt=localtime(); printf "%.4d%0.2d%0.2d00\n",$lt[5]+1900,$lt[4]+1,$lt[3];'`
Evan Hunt's avatar
Evan Hunt committed
1541
1542
serial=`awk '/^;/ { next; } $4 == "SOA" { print $7 }' signer/signer.out.9`
[ "$now" -eq "$serial" ] || ret=1
1543
n=`expr $n + 1`
Evan Hunt's avatar
Evan Hunt committed
1544
1545
1546
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
echo "I:checking validated data are not cached longer than originalttl ($n)"
ret=0
$DIG $DIGOPTS +ttl +noauth a.ttlpatch.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +ttl +noauth a.ttlpatch.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
grep "3600.IN" dig.out.ns3.test$n > /dev/null || ret=1
grep "300.IN" dig.out.ns3.test$n > /dev/null && ret=1
grep "300.IN" dig.out.ns4.test$n > /dev/null || ret=1
grep "3600.IN" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

1559
1560
1561
1562
1563
# Test that "rndc secroots" is able to dump trusted keys
echo "I:checking rndc secroots ($n)"
ret=0
$RNDC -c ../common/rndc.conf -s 10.53.0.4 -p 9953 secroots 2>&1 | sed 's/^/I:ns1 /'
keyid=`cat ns1/managed.key.id`
Evan Hunt's avatar
Evan Hunt committed
1564
1565
cp ns4/named.secroots named.secroots.test$n
linecount=`grep "./RSAMD5/$keyid ; trusted" named.secroots.test$n | wc -l`
Mark Andrews's avatar
Mark Andrews committed
1566
[ "$linecount" -eq 1 ] || ret=1
Evan Hunt's avatar
Evan Hunt committed
1567
1568
linecount=`cat named.secroots.test$n | wc -l`
[ "$linecount" -eq 10 ] || ret=1
1569
1570
1571
1572
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

1573
1574
1575
1576
1577
1578
1579
1580
1581
# Check direct query for RRSIG.  If we first ask for normal (non RRSIG)
# record, the corresponding RRSIG should be cached and subsequent query
# for RRSIG will be returned with the cached record.
echo "I:checking RRSIG query from cache ($n)"
ret=0
$DIG $DIGOPTS normalthenrrsig.secure.example. @10.53.0.4 a > /dev/null || ret=1
ans=`$DIG $DIGOPTS +short normalthenrrsig.secure.example. @10.53.0.4 rrsig` || ret=1
expect=`$DIG $DIGOPTS +short normalthenrrsig.secure.example. @10.53.0.3 rrsig | grep '^A' ` || ret=1
test "$ans" = "$expect" || ret=1
1582
1583
1584
# also check that RA is set
$DIG $DIGOPTS normalthenrrsig.secure.example. @10.53.0.4 rrsig > dig.out.ns4.test$n || ret=1
grep "flags:.*ra.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

# Check direct query for RRSIG: If it's not cached with other records,
# it should result in an empty response.
echo "I:checking RRSIG query not in cache ($n)"
ret=0
ans=`$DIG $DIGOPTS +short rrsigonly.secure.example. @10.53.0.4 rrsig` || ret=1
test -z "$ans" || ret=1
1595
1596
1597
# also check that RA is cleared
$DIG $DIGOPTS rrsigonly.secure.example. @10.53.0.4 rrsig > dig.out.ns4.test$n || ret=1
grep "flags:.*ra.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
1598
1599
1600
1601
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
#
# RT21868 regression test.
#
echo "I:checking NSEC3 zone with mismatched NSEC3PARAM / NSEC parameters ($n)"
ret=0
$DIG $DIGOPTS non-exist.badparam. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns2.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
#
# RT22007 regression test.
#
echo "I:checking optout NSEC3 referral with only insecure delegations ($n)"
ret=0
$DIG $DIGOPTS +norec delegation.single-nsec3. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1
grep "3KL3NK1HKQ4IUEEHBEF12VGFKUETNBAN.*NSEC3 1 1 1 - 3KL3NK1HKQ4IUEEHBEF12VGFKUETNBAN" dig.out.ns2.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking optout NSEC3 NXDOMAIN with only insecure delegations ($n)"
ret=0
$DIG $DIGOPTS +norec nonexist.single-nsec3. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns2.test$n > /dev/null || ret=1
grep "3KL3NK1HKQ4IUEEHBEF12VGFKUETNBAN.*NSEC3 1 1 1 - 3KL3NK1HKQ4IUEEHBEF12VGFKUETNBAN" dig.out.ns2.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi

status=`expr $status + $ret`
echo "I:checking optout NSEC3 nodata with only insecure delegations ($n)"
ret=0
$DIG $DIGOPTS +norec single-nsec3. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1
grep "3KL3NK1HKQ4IUEEHBEF12VGFKUETNBAN.*NSEC3 1 1 1 - 3KL3NK1HKQ4IUEEHBEF12VGFKUETNBAN" dig.out.ns2.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

1643
1644
1645
1646
1647
echo "I:checking that a zone finishing the transition from RSASHA1 to RSASHA256 validates secure ($n)"
ret=0
$DIG $DIGOPTS ns algroll. @10.53.0.4 > dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n > /dev/null || ret=1
Evan Hunt's avatar
Evan Hunt committed
1648
1649
1650
1651
1652
1653
n=`expr $n + 1`
if [ $ret != 0 ]; then echo "I:failed"; fi
status=`expr $status + $ret`

echo "I:checking positive and negative validation with negative trust anchors ($n)"
ret=0
1654

Evan Hunt's avatar
Evan Hunt committed
1655
#
Evan Hunt's avatar
Evan Hunt committed
1656
# check correct initial behavior
Evan Hunt's avatar
Evan Hunt committed
1657
#
Evan Hunt's avatar
Evan Hunt committed
1658
1659
$DIG $DIGOPTS a.bogus.example. a @10.53.0.4 > dig.out.ns4.test$n.1 || ret=1
grep "status: SERVFAIL" dig.out.ns4.test$n.1 > /dev/null || ret=1
Evan Hunt's avatar
Evan Hunt committed
1660
1661
1662
$DIG $DIGOPTS badds.example. soa @10.53.0.4 > dig.out.ns4.test$n.2 || ret=1
grep "status: SERVFAIL" dig.out.ns4.test$n.2 > /dev/null || ret=1
$DIG $DIGOPTS a.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.3 || ret=1
1663
grep "status: SERVFAIL" dig.out.ns4.test$n.3 > /dev/null && ret=1
Evan Hunt's avatar
Evan Hunt committed
1664
1665
grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.3 > /dev/null || ret=1

1666
1667
1668
1669
if [ $ret != 0 ]; then echo "I:failed - checking initial state"; fi
status=`expr $status + $ret`
ret=0

Evan Hunt's avatar
Evan Hunt committed
1670
#
Evan Hunt's avatar
Evan Hunt committed
1671
# add negative trust anchors
Evan Hunt's avatar
Evan Hunt committed
1672
#
1673
$RNDC -c ../common/rndc.conf -s 10.53.0.4 -p 9953 nta -f -l 20s bogus.example 2>&1 | sed 's/^/I:ns4 /'
Evan Hunt's avatar
Evan Hunt committed
1674
$RNDC -c ../common/rndc.conf -s 10.53.0.4 -p 9953 nta badds.example 2>&1 | sed 's/^/I:ns4 /'
1675
$RNDC -c ../common/rndc.conf -s 10.53.0.4 -p 9953 reconfig # reconfig should maintain NTAs
1676
1677
$RNDC -c ../common/rndc.conf -s 10.53.0.4 -p 9953 nta -d > rndc.out.ns4.test$n.1
lines=`wc -l < rndc.out.ns4.test$n.1`
Evan Hunt's avatar
Evan Hunt committed
1678
1679
1680
[ "$lines" -eq 2 ] || ret=1
$RNDC -c ../common/rndc.conf -s 10.53.0.4 -p 9953 nta secure.example 2>&1 | sed 's/^/I:ns4 /'
$RNDC -c ../common/rndc.conf -s 10.53.0.4 -p 9953 nta fakenode.secure.example 2>&1 | sed 's/^/I:ns4 /'
1681
$RNDC -c ../common/rndc.conf -s 10.53.0.4 -p 9953 reload # reload should maintain NTAs
1682
1683
$RNDC -c ../common/rndc.conf -s 10.53.0.4 -p 9953 nta -d > rndc.out.ns4.test$n.2
lines=`wc -l < rndc.out.ns4.test$n.2`
Evan Hunt's avatar
Evan Hunt committed
1684
[ "$lines" -eq 4 ] || ret=1
1685
1686
1687
1688
1689
start=`$PERL -e 'print time()."\n";'`

if [ $ret != 0 ]; then echo "I:failed - adding NTA's failed"; fi
status=`expr $status + $ret`
ret=0
Evan Hunt's avatar
Evan Hunt committed
1690
1691

#
Evan Hunt's avatar
Evan Hunt committed
1692
# check behavior with NTA's in place
Evan Hunt's avatar
Evan Hunt committed
1693
1694
1695
#
$DIG $DIGOPTS a.bogus.example. a @10.53.0.4 > dig.out.ns4.test$n.4 || ret=1
grep "status: SERVFAIL" dig.out.ns4.test$n.4 > /dev/null && ret=1
1696
grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.4 > /dev/null && ret=1
Evan Hunt's avatar
Evan Hunt committed
1697
1698
$DIG $DIGOPTS badds.example. soa @10.53.0.4 > dig.out.ns4.test$n.5 || ret=1
grep "status: SERVFAIL" dig.out.ns4.test$n.5 > /dev/null && ret=1
1699
grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.5 > /dev/null && ret=1
Evan Hunt's avatar
Evan Hunt committed
1700
$DIG $DIGOPTS a.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.6 || ret=1
1701
grep "status: SERVFAIL" dig.out.ns4.test$n.6 > /dev/null && ret=1
Evan Hunt's avatar
Evan Hunt committed
1702
1703
1704
1705
1706
1707
1708
1709
1710
grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.6 > /dev/null && ret=1
$DIG $DIGOPTS a.fakenode.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.7 || ret=1
grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.7 > /dev/null && ret=1
echo "I: dumping secroots"
$RNDC -c ../common/rndc.conf -s 10.53.0.4 -p 9953 secroots | sed 's/^/I:ns4 /'
grep "bogus.example: expiry" ns4/named.secroots > /dev/null || ret=1
grep "badds.example: expiry" ns4/named.secroots > /dev/null || ret=1
grep "secure.example: expiry" ns4/named.secroots > /dev/null || ret=1
grep "fakenode.secure.example: expiry" ns4/named.secroots > /dev/null || ret=1
1711
1712
1713
1714
1715

if [ $ret != 0 ]; then echo "I:failed - with NTA's in place failed"; fi
status=`expr $status + $ret`
ret=0

Evan Hunt's avatar
Evan Hunt committed
1716
1717
1718
1719
1720
1721
1722
1723
1724
echo "I: waiting for NTA rechecks/expirations"

#
# secure.example and badds.example used default nta-duration
# (configured as 10s in ns4/named1.conf), but nta recheck interval
# is configured to 7s, so at t=8 the NTAs for secure.example and
# fakenode.secure.example should both be lifted, but badds.example
# should still be going.
#
1725
$PERL -e 'my $delay =  '$start' + 10 - time(); select(undef, undef, undef, $delay) if ($delay > 0);'
Evan Hunt's avatar
Evan Hunt committed
1726
$DIG $DIGOPTS b.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.8 || ret=1
1727
grep "status: SERVFAIL" dig.out.ns4.test$n.8 > /dev/null && ret=1
Evan Hunt's avatar
Evan Hunt committed
1728
1729
1730
1731
1732
1733
grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.8 > /dev/null || ret=1
$DIG $DIGOPTS b.fakenode.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.9 || ret=1
grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.9 > /dev/null || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n.9 > /dev/null || ret=1
$DIG $DIGOPTS badds.example. soa @10.53.0.4 > dig.out.ns4.test$n.10 || ret=1
grep "status: SERVFAIL" dig.out.ns4.test$n.10 > /dev/null && ret=1
1734
grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.10 > /dev/null && ret=1
Evan Hunt's avatar
Evan Hunt committed
1735

Mark Andrews's avatar
Mark Andrews committed
1736
if [ $ret != 0 ]; then echo "I:failed - checking that default nta's were lifted due to recheck"; fi
1737
1738
1739
status=`expr $status + $ret`
ret=0

Evan Hunt's avatar
Evan Hunt committed
1740
#
Mark Andrews's avatar
Mark Andrews committed
1741
# bogus.example was set to expire in 20s, so at t=11
Evan Hunt's avatar
Evan Hunt committed
1742
1743
1744
# it should still be NTA'd, but badds.example used the default
# lifetime of 10s, so it should revert to SERVFAIL now.
#