Test jitter distribution

Test jitter distribution in NSEC3 dynamic zone and for a zone that has old
signatures.  In both cases the generated signatures should be spread nicely.

bin/tests/system/autosign/clean.sh

@@ -39,6 +39,7 @@ rm -f ns3/inacksk2.example.db
 rm -f ns3/inacksk3.example.db
 rm -f ns3/inaczsk2.example.db
 rm -f ns3/inaczsk3.example.db
+rm -f ns3/jitter.nsec3.example.db
 rm -f ns3/kg.out ns3/s.out ns3/st.out
 rm -f ns3/kskonly.example.db
 rm -f ns3/nozsk.example.db ns3/inaczsk.example.db

bin/tests/system/autosign/ns3/jitter.nsec3.example.db.in

+; Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+;
+; This Source Code Form is subject to the terms of the Mozilla Public
+; License, v. 2.0. If a copy of the MPL was not distributed with this
+; file, You can obtain one at http://mozilla.org/MPL/2.0/.
+;
+; See the COPYRIGHT file distributed with this work for additional
+; information regarding copyright ownership.
+
+$TTL 300	; 5 minutes
+@			IN SOA	mname1. . (
+				2000042407 ; serial
+				20         ; refresh (20 seconds)
+				20         ; retry (20 seconds)
+				1814400    ; expire (3 weeks)
+				3600       ; minimum (1 hour)
+				)
+			NS	ns
+ns			A	10.53.0.3
+

bin/tests/system/autosign/ns3/keygen.sh

@@ -52,6 +52,21 @@ ksk=`$KEYGEN -q -a RSASHA1 -3 -fk $zone 2> kg.out` || dumpit kg.out
 $KEYGEN -q -a RSASHA1 -3 $zone > kg.out 2>&1 || dumpit kg.out
 $DSFROMKEY $ksk.key > dsset-${zone}$TP
 
+#
+#  Jitter/NSEC3 test zone
+#
+setup jitter.nsec3.example
+cp $infile $zonefile
+count=1
+while [ $count -le 100 ]
+do
+    echo "label${count} IN TXT label${count}" >> $zonefile
+    count=`expr $count + 1`
+done
+# Don't create keys just yet, because the scenario we want to test
+# is an unsigned zone that has a NSEC3PARAM record added with
+# dynamic update before the keys are generated.
+
 #
 #  OPTOUT/NSEC3 test zone
 #
@@ -150,9 +165,16 @@ $DSFROMKEY $ksk.key > dsset-${zone}$TP
 #
 setup oldsigs.example
 cp $infile $zonefile
+count=1
+while [ $count -le 100 ]
+do
+    echo "label${count} IN TXT label${count}" >> $zonefile
+    count=`expr $count + 1`
+done
 $KEYGEN -q -a RSASHA1 -fk $zone > kg.out 2>&1 || dumpit kg.out
 $KEYGEN -q -a RSASHA1 $zone > kg.out 2>&1 || dumpit kg.out
-$SIGNER -PS -s now-1y -e now-6mo -o $zone -f $zonefile $infile > s.out || dumpit s.out
+$SIGNER -PS -s now-1y -e now-6mo -o $zone -f $zonefile.signed $zonefile > s.out || dumpit s.out
+mv $zonefile.signed $zonefile
 
 #
 # NSEC3->NSEC transition test zone.

bin/tests/system/autosign/ns3/named.conf.in

@@ -95,6 +95,14 @@ zone "nsec3.nsec3.example" {
 	auto-dnssec maintain;
 };
 
+zone "jitter.nsec3.example" {
+	type master;
+	file "jitter.nsec3.example.db";
+	allow-update { any; };
+	auto-dnssec maintain;
+	sig-validity-interval 10 2;
+};
+
 zone "secure.nsec3.example" {
 	type master;
 	file "secure.nsec3.example.db";
@@ -178,6 +186,7 @@ zone "oldsigs.example" {
 	file "oldsigs.example.db";
 	allow-update { any; };
 	auto-dnssec maintain;
+	sig-validity-interval 10 2;
 };
 
 zone "prepub.example" {

bin/tests/system/autosign/tests.sh

@@ -50,6 +50,43 @@ checkprivate () {
     return 1
 }
 
+# Check the signatures expiration times.  First check how many signatures
+# there are in total ($rrsigs).  Then see what the distribution of signature
+# expiration times is ($expiretimes).  Ignore the time part for a better
+# modelled distribution.
+checkjitter () {
+	_file=$1
+	_ret=0
+
+	cat $_file | awk '$4 == "RRSIG" {print substr($9,1,8)}' | sort | uniq -c | cat_i
+	_rrsigs=$(cat $_file | awk '$4 == "RRSIG" {print $4}' | cat_i | wc -l)
+	_expiretimes=$(cat $_file | awk '$4 == "RRSIG" {print substr($9,1,8)}' | sort | uniq -c | awk '{print $1}')
+	_count=0
+	_total=0
+	for _num in $_expiretimes
+	do
+		_total=$(($_total + $_num))
+	done
+	# Make sure the total number of numbers matches the number of RRSIGs.
+	test $_total -eq $_rrsigs || _ret=1
+	# Calculate mean: The number of signatures divided over 8 days.
+	_mean=$(($_total / 8))
+	# We expect the number of signatures not to exceed twice the mean.
+	_limit=$(($_mean * 2))
+	# Add an additional margin.
+	_limit=$(($_limit + 10))
+	# Find outliers.
+	for _num in $_expiretimes
+	do
+		if [ $_num -gt $_limit ]; then
+			echo_i "error: too many RRSIG records ($_num) with the same expiration time"
+			_ret=1
+		fi
+	done
+
+	return $_ret
+}
+
 #
 #  The NSEC record at the apex of the zone and its RRSIG records are
 #  added as part of the last step in signing a zone.  We wait for the
@@ -334,6 +371,15 @@ do
 	sleep 1
 done
 n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+# Check jitter distribution.
+echo_i "checking expired signatures were jittered correctly ($n)"
+ret=0
+$DIG $DIGOPTS axfr oldsigs.example @10.53.0.3 > dig.out.ns3.test$n || ret=1
+checkjitter dig.out.ns3.test$n || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
 status=`expr $status + $ret`
 
 echo_i "checking NSEC->NSEC3 conversion succeeded ($n)"
@@ -938,6 +984,36 @@ n=`expr $n + 1`
 if [ $ret != 0 ]; then echo_i "failed"; fi
 status=`expr $status + $ret`
 
+echo_i "checking jitter in a newly signed NSEC3 zone ($n)"
+ret=0
+# Use DNS UPDATE to add an NSEC3PARAM record into the zone.
+$NSUPDATE > nsupdate.out.test$n 2>&1 <<END || ret=1
+server 10.53.0.3 ${PORT}
+zone jitter.nsec3.example.
+update add jitter.nsec3.example. 3600 NSEC3PARAM 1 0 10 BEEF
+send
+END
+[ $ret != 0 ] && echo_i "error: dynamic update add NSEC3PARAM failed"
+# Create DNSSEC keys in the zone directory.
+$KEYGEN -a rsasha1 -3 -q -K ns3 jitter.nsec3.example > /dev/null
+# Trigger zone signing.
+$RNDCCMD 10.53.0.3 sign jitter.nsec3.example. 2>&1 | sed 's/^/ns3 /' | cat_i
+# Wait until zone has been signed.
+for i in 0 1 2 3 4 5 6 7 8 9; do
+	failed=0
+	$DIG $DIGOPTS axfr jitter.nsec3.example @10.53.0.3 > dig.out.ns3.test$n || failed=1
+	grep "NSEC3PARAM" dig.out.ns3.test$n > /dev/null || failed=1
+	[ $failed -eq 0 ] && break
+	echo_i "waiting ... ($i)"
+	sleep 2
+done
+[ $failed != 0 ] && echo_i "error: no NSEC3PARAM found in AXFR" && ret=1
+# Check jitter distribution.
+checkjitter dig.out.ns3.test$n || ret=1
+n=`expr $n + 1`
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
 echo_i "checking that serial number and RRSIGs are both updated (rt21045) ($n)"
 ret=0
 oldserial=`$DIG $DIGOPTS +short soa prepub.example @10.53.0.3 | awk '$0 !~ /SOA/ {print $3}'`