# BIND 9 ### Contents 1. [Introduction](#intro) 1. [Reporting bugs and getting help](#help) 1. [Contributing to BIND](#contrib) 1. [BIND 9.12 features](#features) 1. [Building BIND](#build) 1. [Compile-time options](#opts) 1. [Automated testing](#testing) 1. [Documentation](#doc) 1. [Change log](#changes) 1. [Acknowledgments](#ack) ### Introduction BIND (Berkeley Internet Name Domain) is a complete, highly portable implementation of the DNS (Domain Name System) protocol. The BIND name server, `named`, is able to serve as an authoritative name server, recursive resolver, DNS forwarder, or all three simultaneously. It implements views for split-horizon DNS, automatic DNSSEC zone signing and key management, catalog zones to facilitate provisioning of zone data throughout a name server constellation, response policy zones (RPZ) to protect clients from malicious data, response rate limiting (RRL) and recursive query limits to reduce distributed denial of service attacks, and many other advanced DNS features. BIND also includes a suite of administrative tools, including the `dig` and `delv` DNS lookup tools, `nsupdate` for dynamic DNS zone updates, `rndc` for remote name server administration, and more. BIND 9 is a complete re-write of the BIND architecture that was used in versions 4 and 8. Internet Systems Consortium ([https://www.isc.org](https://www.isc.org)), a 501(c)(3) public benefit corporation dedicated to providing software and services in support of the Internet infrastructure, developed BIND 9 and is responsible for its ongoing maintenance and improvement. BIND is open source software licenced under the terms of the Mozilla Public License, version 2.0. For a summary of features introduced in past major releases of BIND, see the file [HISTORY](HISTORY.md). For a detailed list of changes made throughout the history of BIND 9, see the file [CHANGES](CHANGES). See [below](#changes) for details on the CHANGES file format. For up-to-date release notes and errata, see [http://www.isc.org/software/bind9/releasenotes](http://www.isc.org/software/bind9/releasenotes) ### Reporting bugs and getting help Please report assertion failure errors and suspected security issues to [security-officer@isc.org](mailto:security-officer@isc.org). General bug reports can be sent to [bind9-bugs@isc.org](mailto:bind9-bugs@isc.org). Feature requests can be sent to [bind-suggest@isc.org](mailto:bind-suggest@isc.org). Please note that, while ISC's ticketing system is not currently publicly readable, this may change in the future. Please do not include information in bug reports that you consider to be confidential. For example, when sending the contents of your configuration file, it is advisable to obscure key secrets; this can be done automatically by using `named-checkconf -px`. Professional support and training for BIND are available from ISC at [https://www.isc.org/support](https://www.isc.org/support). To join the __BIND Users__ mailing list, or view the archives, visit [https://lists.isc.org/mailman/listinfo/bind-users](https://lists.isc.org/mailman/listinfo/bind-users). If you're planning on making changes to the BIND 9 source code, you may also want to join the __BIND Workers__ mailing list, at [https://lists.isc.org/mailman/listinfo/bind-workers](https://lists.isc.org/mailman/listinfo/bind-workers). ### Contributing to BIND A public git repository for BIND is maintained at [http://www.isc.org/git/](http://www.isc.org/git/), and also on Github at [https://github.com/isc-projects](https://github.com/isc-projects). Information for BIND contributors can be found in the following files: - General information: [doc/dev/contrib.md](doc/dev/contrib.md) - BIND 9 code style: [doc/dev/style.md](doc/dev/style.md) - BIND architecture and developer guide: [doc/dev/dev.md](doc/dev/dev.md) Patches for BIND may be submitted either as Github pull requests or via email. When submitting a patch via email, please prepend the subject header with "`[PATCH]`" so it will be easier for us to find. If your patch introduces a new feature in BIND, please submit it to [bind-suggest@isc.org](mailto:bind-suggest@isc.org); if it fixes a bug, please submit it to [bind9-bugs@isc.org](mailto:bind9-bugs@isc.org). ### BIND 9.12 features BIND 9.12.0 is the newest development branch of BIND 9. It includes a number of changes from BIND 9.11 and earlier releases. New features include: * `named` and related libraries have been substantially refactored for for improved query performance -- particularly on delegation heavy zones -- and for improved readability, maintainability, and testability. * Code implementing the name server query processing logic has been moved into a new `libns` library, for easier testing and use in tools other than `named`. * Cached, validated NSEC and other records can now be used to synthesize NXDOMAIN responses. * The DNS Response Policy Service API (DNSRPS) is now supported. * Setting `max-journal-size default` now limits the size of journal files to twice the size of the zone. * The query handling code has been substantially refactored for improved readability, maintainability and testability . * `dnstap-read -x` prints a hex dump of the wire format of each logged DNS message. * `dnstap` output files can now be configured to roll automatically when reaching a given size. * Log file timestamps can now also be formatted in ISO 8601 (local) or ISO 8601 (UTC) formats. * Logging channels and `dnstap` output files can now be configured to use a timestamp as the suffix when rolling to a new file. * `named-checkconf -l` lists zones found in `named.conf`. * Added support for the EDNS Padding and Keepalive options. * 'new-zones-directory' option sets the location where the configuration data for zones added by rndc addzone is stored * `named-checkconf -l` lists the zones found in `named.conf`. ### Building BIND BIND requires a UNIX or Linux system with an ANSI C compiler, basic POSIX support, and a 64-bit integer type. Successful builds have been observed on many versions of Linux and UNIX, including RedHat, Fedora, Debian, Ubuntu, SuSE, Slackware, FreeBSD, NetBSD, OpenBSD, Mac OS X, Solaris, HP-UX, AIX, SCO OpenServer, and OpenWRT. BIND is also available for Windows XP, 2003, 2008, and higher. See `win32utils/readme1st.txt` for details on building for Windows systems. To build on a UNIX or Linux system, use: $ ./configure $ make If you're planning on making changes to the BIND 9 source, you should run `make depend`. If you're using Emacs, you might find `make tags` helpful. Several environment variables that can be set before running `configure` will affect compilation: |Variable|Description | |--------------------|-----------------------------------------------| |`CC`|The C compiler to use. `configure` tries to figure out the right one for supported systems.| |`CFLAGS`|C compiler flags. Defaults to include -g and/or -O2 as supported by the compiler. Please include '-g' if you need to set `CFLAGS`. | |`STD_CINCLUDES`|System header file directories. Can be used to specify where add-on thread or IPv6 support is, for example. Defaults to empty string.| |`STD_CDEFINES`|Any additional preprocessor symbols you want defined. Defaults to empty string. For a list of possible settings, see the file [OPTIONS](OPTIONS.md).| |`LDFLAGS`|Linker flags. Defaults to empty string.| |`BUILD_CC`|Needed when cross-compiling: the native C compiler to use when building for the target system.| |`BUILD_CFLAGS`|Optional, used for cross-compiling| |`BUILD_CPPFLAGS`|| |`BUILD_LDFLAGS`|| |`BUILD_LIBS`|| #### Compile-time options To see a full list of configuration options, run `configure --help`. On most platforms, BIND 9 is built with multithreading support, allowing it to take advantage of multiple CPUs. You can configure this by specifying `--enable-threads` or `--disable-threads` on the `configure` command line. The default is to enable threads, except on some older operating systems on which threads are known to have had problems in the past. (Note: Prior to BIND 9.10, the default was to disable threads on Linux systems; this has now been reversed. On Linux systems, the threaded build is known to change BIND's behavior with respect to file permissions; it may be necessary to specify a user with the -u option when running `named`.) To build shared libraries, specify `--with-libtool` on the `configure` command line. Certain compiled-in constants and default settings can be increased to values better suited to large servers with abundant memory resources (e.g, 64-bit servers with 12G or more of memory) by specifying `--with-tuning=large` on the `configure` command line. This can improve performance on big servers, but will consume more memory and may degrade performance on smaller systems. For the server to support DNSSEC, you need to build it with crypto support. To use OpenSSL, you should have OpenSSL 1.0.2e or newer installed. If the OpenSSL library is installed in a nonstandard location, specify the prefix using "--with-openssl=/prefix" on the configure command line. To use a PKCS#11 hardware service module for cryptographic operations, specify the path to the PKCS#11 provider library using "--with-pkcs11=/prefix", and configure BIND with "--enable-native-pkcs11". To support the HTTP statistics channel, the server must be linked with at least one of the following: libxml2 [http://xmlsoft.org](http://xmlsoft.org) or json-c [https://github.com/json-c](https://github.com/json-c). If these are installed at a nonstandard location, specify the prefix using `--with-libxml2=/prefix` or `--with-libjson=/prefix`. To support compression on the HTTP statistics channel, the server must be linked against libzlib. If this is installed in a nonstandard location, specify the prefix using `--with-zlib=/prefix`. To support storing configuration data for runtime-added zones in an LMDB database, the server must be linked with liblmdb. If this is installed in a nonstandard location, specify the prefix using "with-lmdb=/prefix". To support GeoIP location-based ACLs, the server must be linked with libGeoIP. This is not turned on by default; BIND must be configured with "--with-geoip". If the library is installed in a nonstandard location, use specify the prefix using "--with-geoip=/prefix". For DNSTAP packet logging, you must have libfstrm [https://github.com/farsightsec/fstrm](https://github.com/farsightsec/fstrm) and libprotobuf-c [https://developers.google.com/protocol-buffers](https://developers.google.com/protocol-buffers), and BIND must be configured with "--enable-dnstap". Python requires the 'argparse' and 'ply' modules to be available. 'argparse' is a standard module as of Python 2.7 and Python 3.2. 'ply' is available from [https://pypi.python.org/pypi/ply](https://pypi.python.org/pypi/ply). On some platforms it is necessary to explicitly request large file support to handle files bigger than 2GB. This can be done by using `--enable-largefile` on the `configure` command line. Support for the "fixed" rrset-order option can be enabled or disabled by specifying `--enable-fixed-rrset` or `--disable-fixed-rrset` on the configure command line. By default, fixed rrset-order is disabled to reduce memory footprint. If your operating system has integrated support for IPv6, it will be used automatically. If you have installed KAME IPv6 separately, use `--with-kame[=PATH]` to specify its location. `make install` will install `named` and the various BIND 9 libraries. By default, installation is into /usr/local, but this can be changed with the `--prefix` option when running `configure`. You may specify the option `--sysconfdir` to set the directory where configuration files like `named.conf` go by default, and `--localstatedir` to set the default parent directory of `run/named.pid`. For backwards compatibility with BIND 8, `--sysconfdir` defaults to `/etc` and `--localstatedir` defaults to `/var` if no `--prefix` option is given. If there is a `--prefix` option, sysconfdir defaults to `$prefix/etc` and localstatedir defaults to `$prefix/var`. ### Automated testing A system test suite can be run with `make test`. The system tests require you to configure a set of virtual IP addresses on your system (this allows multiple servers to run locally and communicate with one another). These IP addresses can be configured by by running the script `bin/tests/system/ifconfig.sh up` as root. Some tests require Perl and the Net::DNS and/or IO::Socket::INET6 modules, and will be skipped if these are not available. Some tests require Python and the 'dnspython' module and will be skipped if these are not available. See bin/tests/system/README for further details. Unit tests are implemented using Automated Testing Framework (ATF). To run them, use `configure --with-atf`, then run `make test` or `make unit`. ### Documentation The *BIND 9 Administrator Reference Manual* is included with the source distribution, in DocBook XML, HTML and PDF format, in the `doc/arm` directory. Some of the programs in the BIND 9 distribution have man pages in their directories. In particular, the command line options of `named` are documented in `bin/named/named.8`. Frequently (and not-so-frequently) asked questions and their answers can be found in the ISC Knowledge Base at [https://kb.isc.org](https://kb.isc.org). Additional information on various subjects can be found in other `README` files throughout the source tree. ### Change log A detailed list of all changes that have been made throughout the development BIND 9 is included in the file CHANGES, with the most recent changes listed first. Change notes include tags indicating the category of the change that was made; these categories are: |Category |Description | |-------------- |-----------------------------------------------| | [func] | New feature | | [bug] | General bug fix | | [security] | Fix for a significant security flaw | | [experimental] | Used for new features when the syntax or other aspects of the design are still in flux and may change | | [port] | Portability enhancement | | [maint] | Updates to built-in data such as root server addresses and keys | | [tuning] | Changes to built-in configuration defaults and constants to improve performance | | [performance] | Other changes to improve server performance | | [protocol] | Updates to the DNS protocol such as new RR types | | [test] | Changes to the automatic tests, not affecting server functionality | | [cleanup] | Minor corrections and refactoring | | [doc] | Documentation | | [contrib] | Changes to the contributed tools and libraries in the 'contrib' subdirectory | | [placeholder] | Used in the master development branch to reserve change numbers for use in other branches, e.g. when fixing a bug that only exists in older releases | In general, [func] and [experimental] tags will only appear in new-feature releases (i.e., those with version numbers ending in zero). Some new functionality may be backported to older releases on a case-by-case basis. All other change types may be applied to all currently-supported releases. ### Acknowledgments * The original development of BIND 9 was underwritten by the following organizations: Sun Microsystems, Inc. Hewlett Packard Compaq Computer Corporation IBM Process Software Corporation Silicon Graphics, Inc. Network Associates, Inc. U.S. Defense Information Systems Agency USENIX Association Stichting NLnet - NLnet Foundation Nominum, Inc. * This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. [http://www.OpenSSL.org/](http://www.OpenSSL.org/) * This product includes cryptographic software written by Eric Young (eay@cryptsoft.com) * This product includes software written by Tim Hudson (tjh@cryptsoft.com)