Newer Older
Ted Lemon's avatar
Ted Lemon committed
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
		     Internet Software Consortium
	      Dynamic Host Configuration Protocol Server
			    Beta Release 0
			    March 6, 1996

This is the first Beta release of the Internet Software Consortium
DHCP Server (ISC dhcpd).  In this Beta release, support for the core
DHCP protocol is provided.  BOOTP support is also provided for
backwards compatibility.  The beta release currently runs on NetBSD
and BSD/OS, and may run on Ultrix.  It should port fairly easily to a
variety of UNIX-like systems.

The default Makefile is a 4.4BSD-style makefile.   If you do not have
access to a 4.4BSD-style make, use Makefile.std.   This is an
old-style makefile and should work on most systems.

Ted Lemon's avatar
Ted Lemon committed
17 18 19 20 21 22 23 24
If you want to attempt a port, the first thing to do is to make a copy
of one of the header files in cf/ for your system and hack the
variables you find there as needed.   Hack osdep.h to conditionally
include your header file when compiling on your system.   This process
is by no means self-explanatory at this point - it will get better as
dhcpd matures.   If you are building on BSD/os or NetBSD, just type
make - it should build with no problem.

Ted Lemon's avatar
Ted Lemon committed
25 26 27 28 29 30
Last week (February 26-28), I brought ISC dhcpd to Connectathon and
worked out many bugs.  ISC dhcpd was able to boot all of the DHCP
clients at Connectathon by the time I left.  Many thanks to Audrey Van
Belleghem for getting me in to Connectathon even though we weren't
able to budget for it, to Mike Carney for running the DHCP testing in
general and helping me out in particular, and to all the other DHCP
Ted Lemon's avatar
Ted Lemon committed
31 32 33
Bakeoff participants at Connectathon who tried their clients against
dhcpd and told me where it was busted, or, later on, that it wasn't
busted anymore.
Ted Lemon's avatar
Ted Lemon committed

Ted Lemon's avatar
Ted Lemon committed
35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54

dhcpd logs to LOG_DAEMON.   Depending on the logging level that you
choose with syslog, you can get quite a bit of information about what
dhcpd is doing.   To get the most logging, put the following in your
/etc/syslog.conf file and restart syslog:

daemon.debug:	/var/log/daemon.log

(obviously, change the filename to suit your taste).

This change may have the unfortunate side effect of capturing a lot of
information from daemons other than dhcpd that you don't want to look

You can also compile dhcpd with ``make DEBUG="-g -DDEBUG"''.  If you
do this, dhcpd will run in the foreground rather than as a daemon, and
will print its log messages to standard error.  It will also dump the
contents of all packets it receives and sends.

Ted Lemon's avatar
Ted Lemon committed
55 56

Ted Lemon's avatar
Ted Lemon committed
Currently, ISC dhcpd supports the DHCP protocol strictly the standard
Ted Lemon's avatar
Ted Lemon committed
58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86
Berkeley socket interface to UDP/IP.  This makes it very portable, but
has several drawbacks.  First of all, it is impossible to identify the
interface on which a DHCP request was received.  As a consequence,
dhcpd currently exits if it discovers that it's running on a machine
with more than one network address.

Secondly, it is difficult to send a broadcast to the all-ones IP
broadcast address as required by the DHCP protocol.  I have had some
luck on 4.4BSD-based systems declaring a route to
through the local IP address, and have also found that some clients
will accept broadcasts from the local subnet broadcast address.  I
would be interested in hearing about your experiences with this.

A socket interface abstraction which can be layered atop sun's NIT or
the Berkeley Packet Filter will be included in the next beta release,
but probably won't work on as many systems.   On those systems where
it works, though, it will solve both the multiple interface problem
and the all-ones broadcast problem.

This release of dhcpd does not contain support for DHCPINFORM.
Support for DHCPINFORM will be present in the next release.
DHCPINFORM is somewhat tangential to the main purpose of the DHCP
protocol, so this probably won't be a major problem for most users.

The man page for dhcpd.leases is not yet ready.

The system is painful to configure.   I will try to get GNU configure
going in the next release.