README 30.4 KB
Newer Older
Evan Hunt's avatar
Evan Hunt committed
1
	      Internet Systems Consortium DHCP Distribution
2 3
			     Version 4.4.2b1
			    12 December 2019
4

5
			      README FILE
6 7 8 9 10 11 12 13 14

You should read this file carefully before trying to install or use
the ISC DHCP Distribution.

			  TABLE OF CONTENTS

	1	WHERE TO FIND DOCUMENTATION
	2	RELEASE STATUS
	3	BUILDING THE DHCP DISTRIBUTION
15 16 17
	 3.1	 UNPACKING IT
	 3.2	 CONFIGURING IT
	  3.2.1	  DYNAMIC DNS UPDATES
18
	  3.2.2   LOCALLY DEFINED OPTIONS
19
	 3.3	 BUILDING IT
20 21
	4	INSTALLING THE DHCP DISTRIBUTION
	5	USING THE DHCP DISTRIBUTION
22 23 24 25 26 27 28 29 30 31 32 33 34 35
	 5.1	  FIREWALL RULES
	 5.2	 LINUX
	  5.2.1	  IF_TR.H NOT FOUND
	  5.2.2	  SO_ATTACH_FILTER UNDECLARED
	  5.2.3	  PROTOCOL NOT CONFIGURED
	  5.2.4	  BROADCAST
	  5.2.6	  IP BOOTP AGENT
	  5.2.7	  MULTIPLE INTERFACES
	 5.3	 SCO
	 5.4	 HP-UX
	 5.5	 ULTRIX
	 5.6	 FreeBSD
	 5.7	 NeXTSTEP
	 5.8	 SOLARIS
36
	  5.8.1 Solaris 11
Shawn Routhier's avatar
Shawn Routhier committed
37 38
	  5.8.2 Solaris 11 and ATF
	  5.8.3 Other Solaris Items
39 40
	 5.9	 AIX
	 5.10	 MacOS X
41
         5.11    ATF
42
	6	SUPPORT
43
	 6.1	 HOW TO REPORT BUGS
44
	7	HISTORY
45 46

		      WHERE TO FIND DOCUMENTATION
Ted Lemon's avatar
Ted Lemon committed
47 48 49

Documentation for this software includes this README file, the
RELNOTES file, and the manual pages, which are in the server, common,
50 51 52 53
client and relay subdirectories.  The README file (this file) includes
late-breaking operational and system-specific information that you
should read even if you don't want to read the manual pages, and that
you should *certainly* read if you run into trouble.  Internet
Tomek Mrugalski's avatar
Tomek Mrugalski committed
54 55
standards relating to the DHCP protocol are listed in the References
document that is available in html, txt and xml formats in doc/
56 57 58
subdirectory.  You will have the best luck reading the manual pages if
you build this software and then install it, although you can read
them directly out of the distribution if you need to.
Ted Lemon's avatar
Ted Lemon committed
59 60 61 62 63

DHCP server documentation is in the dhcpd man page.  Information about
the DHCP server lease database is in the dhcpd.leases man page.
Server configuration documentation is in the dhcpd.conf man page as
well as the dhcp-options man page.   A sample DHCP server
Shawn Routhier's avatar
Shawn Routhier committed
64 65
configuration is in the file server/dhcpd.conf.example.   The source for
the dhcpd, dhcpd.leases and dhcpd.conf man pages is in the server/ sub-
66 67
directory in the distribution.   The source for the dhcp-options.5
man page is in the common/ subdirectory.
Ted Lemon's avatar
Ted Lemon committed
68 69 70 71 72 73

DHCP Client documentation is in the dhclient man page.  DHCP client
configuration documentation is in the dhclient.conf man page and the
dhcp-options man page.  The DHCP client configuration script is
documented in the dhclient-script man page.   The format of the DHCP
client lease database is documented in the dhclient.leases man page.
74 75 76
The source for all these man pages is in the client/ subdirectory in
the distribution.   In addition, the dhcp-options man page should be
referred to for information about DHCP options.
Ted Lemon's avatar
Ted Lemon committed
77

78 79
DHCP relay agent documentation is in the dhcrelay man page, the source
for which is distributed in the relay/ subdirectory.
Ted Lemon's avatar
Ted Lemon committed
80

81 82 83
KEA Migration Assistant documentation, including how to build, install
and use it, is including in the keama directory.

Ted Lemon's avatar
Ted Lemon committed
84
To read installed manual pages, use the man command.  Type "man page"
85 86 87
where page is the name of the manual page.   This will only work if
you have installed the ISC DHCP distribution using the ``make install''
command (described later).
Ted Lemon's avatar
Ted Lemon committed
88 89 90 91 92 93

If you want to read manual pages that aren't installed, you can type
``nroff -man page |more'' where page is the filename of the
unformatted manual page.  The filename of an unformatted manual page
is the name of the manual page, followed by '.', followed by some
number - 5 for documentation about files, and 8 for documentation
94 95 96 97
about programs.   For example, to read the dhcp-options man page,
you would type ``nroff -man common/dhcp-options.5 |more'', assuming
your current working directory is the top level directory of the ISC
DHCP Distribution.
Ted Lemon's avatar
Ted Lemon committed
98

99 100 101 102
Please note that the pathnames of files to which our manpages refer
will not be correct for your operating system until after you iterate
'make install' (so if you're reading a manpage out of the source
directory, it may not have up-to-date information).
Ted Lemon's avatar
Ted Lemon committed
103

104 105
		    BUILDING THE DHCP DISTRIBUTION

106 107
			     UNPACKING IT

108 109 110
To build the DHCP Distribution, unpack the compressed tar file using
the tar utility and the gzip command - type something like:

111 112
	gunzip dhcp-4.4.2b1.tar.gz
	tar xvf dhcp-4.4.2b1.tar
113

114 115
			    CONFIGURING IT

116
Now, cd to the dhcp-4.4.2b1 subdirectory that you've just created and
David Hankins's avatar
David Hankins committed
117
configure the source tree by typing:
118

119
	./configure
120 121 122 123 124 125 126

If the configure utility can figure out what sort of system you're
running on, it will create a custom Makefile for you for that
system; otherwise, it will complain.  If it can't figure out what
system you are using, that system is not supported - you are on
your own.

Shawn Routhier's avatar
Shawn Routhier committed
127 128 129 130 131
Several options may be enabled or disabled via the configure command.
You can get a list of these by typing:

	./configure --help

Francis Dupont's avatar
Francis Dupont committed
132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153
If you want to use dynamic shared libraries automake, autoconf
(aka GNU autotools) and libtool must be available. The DHCP
distribution provides 3 configure.ac* files: the -lt version
has no libtool support and was copied to the configure.ac
standard file in the distribution. To enable libtool support
you should perform these steps:

	cp configure.ac+lt configure.ac
	autoreconf -i

after you can use the regenerated configure as usual
(with libtool support (--enable-libtool) on by default):

	./configure

For compatibility (and people who don't read this documentation)
the --enable-libtool configuration file is supported even by
the distributed configure (and off by default). The previous
steps are performed and the regenerated configure called with
almost the same parameters (this "almost" makes the use of
this feature not recommended).

154 155 156 157 158
Note you can't go back from with libtool support to without libtool
support by restoring configure.ac and rerun autoreconf. If you
want or need to restore the without libtool support state the
required way is to simply restore the whole distribution.

159 160
			 DYNAMIC DNS UPDATES

161
A fully-featured implementation of dynamic DNS updates is included in
162
this release.  It uses libraries from BIND and, to avoid issues with
Shawn Routhier's avatar
Shawn Routhier committed
163 164 165 166 167
different versions, includes the necessary BIND version.  The appropriate
BIND libraries will be compiled and installed in the bind subdirectory
as part of the make step.  In order to build the necessary libraries you
will need to have "gmake" available on your build system.

168

Ted Lemon's avatar
Ted Lemon committed
169 170 171
There is documentation for the DDNS support in the dhcpd.conf manual
page - see the beginning of this document for information on finding
manual pages.
172

173 174 175 176 177 178 179 180 181 182
		       LOCALLY DEFINED OPTIONS

In previous versions of the DHCP server there was a mechanism whereby
options that were not known by the server could be configured using
a name made up of the option code number and an identifier:
"option-nnn"   This is no longer supported, because it is not future-
proof.   Instead, if you want to use an option that the server doesn't
know about, you must explicitly define it using the method described
in the dhcp-options man page under the DEFINING NEW OPTIONS heading.

183 184
			     BUILDING IT

185 186 187 188 189 190 191 192 193
Once you've run configure, just type ``make'', and after a while
you should have a dhcp server.  If you get compile errors on one
of the supported systems mentioned earlier, please let us know.
If you get warnings, it's not likely to be a problem - the DHCP
server compiles completely warning-free on as many architectures
as we can manage, but there are a few for which this is difficult.
If you get errors on a system not mentioned above, you will need
to do some programming or debugging on your own to get the DHCP
Distribution working.
194

195 196 197 198
If you cross compile you have to follow the instructions from
the BIND README, in particular you must set the BUILD_CC
environment variable.

199 200
		   INSTALLING THE DHCP DISTRIBUTION

201 202 203 204
Once you have successfully gotten the DHCP Distribution to build, you
can install it by typing ``make install''.   If you already have an old
version of the DHCP Distribution installed, you may want to save it
before typing ``make install''.
Ted Lemon's avatar
Ted Lemon committed
205

206 207
		     USING THE DHCP DISTRIBUTION

208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241
			    FIREWALL RULES

If you are running the DHCP server or client on a computer that's also
acting as a firewall, you must be sure to allow DHCP packets through
the firewall.  In particular, your firewall rules _must_ allow packets
from IP address 0.0.0.0 to IP address 255.255.255.255 from UDP port 68
to UDP port 67 through.  They must also allow packets from your local
firewall's IP address and UDP port 67 through to any address your DHCP
server might serve on UDP port 68.  Finally, packets from relay agents
on port 67 to the DHCP server on port 67, and vice versa, must be
permitted.

We have noticed that on some systems where we are using a packet
filter, if you set up a firewall that blocks UDP port 67 and 68
entirely, packets sent through the packet filter will not be blocked.
However, unicast packets will be blocked.   This can result in strange
behaviour, particularly on DHCP clients, where the initial packet
exchange is broadcast, but renewals are unicast - the client will
appear to be unable to renew until it starts broadcasting its
renewals, and then suddenly it'll work.   The fix is to fix the
firewall rules as described above.

			   PARTIAL SERVERS

If you have a server that is connected to two networks, and you only
want to provide DHCP service on one of those networks (e.g., you are
using a cable modem and have set up a NAT router), if you don't write
any subnet declaration for the network you aren't supporting, the DHCP
server will ignore input on that network interface if it can.  If it
can't, it will refuse to run - some operating systems do not have the
capability of supporting DHCP on machines with more than one
interface, and ironically this is the case even if you don't want to
provide DHCP service on one of those interfaces.

242 243
				LINUX

244 245
There are three big LINUX issues: the all-ones broadcast address,
Linux 2.1 ip_bootp_agent enabling, and operations with more than one
Ted Lemon's avatar
Ted Lemon committed
246 247 248 249 250 251
network interface.   There are also two potential compilation/runtime
problems for Linux 2.1/2.2: the "SO_ATTACH_FILTER undeclared" problem
and the "protocol not configured" problem.

		    LINUX: PROTOCOL NOT CONFIGURED

252
If you get the following message, it's because your kernel doesn't
253
have the Linux packetfilter or raw packet socket configured:
Ted Lemon's avatar
Ted Lemon committed
254

255 256 257 258
 Make sure CONFIG_PACKET (Packet socket) and CONFIG_FILTER (Socket
 Filtering) are enabled in your kernel configuration

If this happens, you need to configure your Linux kernel to support
259 260 261
Socket Filtering and the Packet socket, or to select a kernel provided
by your Linux distribution that has these enabled (virtually all modern
ones do by default).
Ted Lemon's avatar
Ted Lemon committed
262

Ted Lemon's avatar
Ted Lemon committed
263
			   LINUX: BROADCAST
Ted Lemon's avatar
Ted Lemon committed
264

265 266 267 268 269
If you are running a recent version of Linux, this won't be a problem,
but on older versions of Linux (kernel versions prior to 2.2), there
is a potential problem with the broadcast address being sent
incorrectly.

270 271
In order for dhcpd to work correctly with picky DHCP clients (e.g.,
Windows 95), it must be able to send packets with an IP destination
272 273
address of 255.255.255.255.  Unfortunately, Linux changes an IP
destination of 255.255.255.255 into the local subnet broadcast address
274 275 276 277 278 279 280 281
(here, that's 192.5.5.223).

This isn't generally a problem on Linux 2.2 and later kernels, since
we completely bypass the Linux IP stack, but on old versions of Linux
2.1 and all versions of Linux prior to 2.1, it is a problem - pickier
DHCP clients connected to the same network as the ISC DHCP server or
ISC relay agent will not see messages from the DHCP server.   It *is*
possible to run into trouble with this on Linux 2.2 and later if you
Shawn Routhier's avatar
Shawn Routhier committed
282
are running a version of the DHCP server that was compiled on a Linux
283
2.0 system, though.
Ted Lemon's avatar
Ted Lemon committed
284

285 286 287 288
It is possible to work around this problem on some versions of Linux
by creating a host route from your network interface address to
255.255.255.255.   The command you need to use to do this on Linux
varies from version to version.   The easiest version is:
Ted Lemon's avatar
Ted Lemon committed
289

290
	route add -host 255.255.255.255 dev eth0
Ted Lemon's avatar
Ted Lemon committed
291

292 293 294
On some older Linux systems, you will get an error if you try to do
this.   On those systems, try adding the following entry to your
/etc/hosts file:
Ted Lemon's avatar
Ted Lemon committed
295

296
255.255.255.255	all-ones
Ted Lemon's avatar
Ted Lemon committed
297

298
Then, try:
Ted Lemon's avatar
Ted Lemon committed
299

300
	route add -host all-ones dev eth0
Ted Lemon's avatar
Ted Lemon committed
301

302
Another route that has worked for some users is:
Ted Lemon's avatar
Ted Lemon committed
303

304
	route add -net 255.255.255.0 dev eth0
Ted Lemon's avatar
Ted Lemon committed
305

306 307
If you are not using eth0 as your network interface, you should
specify the network interface you *are* using in your route command.
Ted Lemon's avatar
Ted Lemon committed
308

Ted Lemon's avatar
Ted Lemon committed
309
			LINUX: IP BOOTP AGENT
310 311 312 313 314 315 316

Some versions of the Linux 2.1 kernel apparently prevent dhcpd from
working unless you enable it by doing the following:

	      echo 1 >/proc/sys/net/ipv4/ip_bootp_agent


Ted Lemon's avatar
Ted Lemon committed
317
		      LINUX: MULTIPLE INTERFACES
Ted Lemon's avatar
Ted Lemon committed
318

319 320 321 322 323 324
Very old versions of the Linux kernel do not provide a networking API
that allows dhcpd to operate correctly if the system has more than one
broadcast network interface.  However, Linux 2.0 kernels with version
numbers greater than or equal to 2.0.31 add an API feature: the
SO_BINDTODEVICE socket option.  If SO_BINDTODEVICE is present, it is
possible for dhcpd to operate on Linux with more than one network
Ted Lemon's avatar
Ted Lemon committed
325
interface.  In order to take advantage of this, you must be running a
Ted Lemon's avatar
Ted Lemon committed
326 327
2.0.31 or greater kernel, and you must have 2.0.31 or later system
headers installed *before* you build the DHCP Distribution.
Ted Lemon's avatar
Ted Lemon committed
328

Ted Lemon's avatar
Ted Lemon committed
329 330 331 332 333
We have heard reports that you must still add routes to 255.255.255.255
in order for the all-ones broadcast to work, even on 2.0.31 kernels.
In fact, you now need to add a route for each interface.   Hopefully
the Linux kernel gurus will get this straight eventually.

334 335 336 337
Linux 2.1 and later kernels do not use SO_BINDTODEVICE or require the
broadcast address hack, but do support multiple interfaces, using the
Linux Packet Filter.

Paul Selkirk's avatar
Paul Selkirk committed
338 339
			     LINUX: OpenWrt

Paul Selkirk's avatar
Paul Selkirk committed
340 341 342 343 344
DHCP 4.1 has been tested on OpenWrt 7.09 and 8.09.  In keeping with
standard practice, client/scripts now includes a dhclient-script file
for OpenWrt.  However, this is not sufficient by itself to run dhcp on
OpenWrt; a full OpenWrt package for DHCP is available at
ftp://ftp.isc.org/isc/dhcp/dhcp-4.1.0-openwrt.tar.gz
Paul Selkirk's avatar
Paul Selkirk committed
345

346 347 348 349 350 351 352 353 354 355 356 357
		    LINUX: 802.1q VLAN INTERFACES

If you're using 802.1q vlan interfaces on Linux, it is necessary to
vconfig the subinterface(s) to rewrite the 802.1q information out of
packets received by the dhcpd daemon via LPF:

	vconfig set_flag eth1.523 1 1

Note that this may affect the performance of your system, since the
Linux kernel must rewrite packets received via this interface.  For
more information, consult the vconfig man pages.

358
				 SCO
Ted Lemon's avatar
Ted Lemon committed
359

360 361
ISC DHCP will now work correctly on newer versions of SCO out of the
box (tested on OpenServer 5.05b, assumed to work on UnixWare 7).
Ted Lemon's avatar
Ted Lemon committed
362

Shane Kerr's avatar
Shane Kerr committed
363
Older versions of SCO have the same problem as Linux (described earlier).
364 365 366 367
The thing is, SCO *really* doesn't want to let you add a host route to
the all-ones broadcast address.

You can try the following:
Ted Lemon's avatar
Ted Lemon committed
368 369 370 371 372 373

  ifconfig net0 xxx.xxx.xxx.xxx netmask 0xNNNNNNNN broadcast 255.255.255.255

If this doesn't work, you can also try the following strange hack:

  ifconfig net0 alias 10.1.1.1 netmask 8.0.0.0
Ted Lemon's avatar
Ted Lemon committed
374

375 376 377
Apparently this works because of an interaction between SCO's support
for network classes and the weird netmask.  The 10.* network is just a
dummy that can generally be assumed to be safe.   Don't ask why this
378
works.   Just try it.   If it works for you, great.
Ted Lemon's avatar
Ted Lemon committed
379

380 381 382
				HP-UX

HP-UX has the same problem with the all-ones broadcast address that
383 384 385 386 387 388 389 390 391 392
SCO and Linux have.   One user reported that adding the following to
/etc/rc.config.d/netconf helped (you may have to modify this to suit
your local configuration):

INTERFACE_NAME[0]=lan0
IP_ADDRESS[0]=1.1.1.1
SUBNET_MASK[0]=255.255.255.0
BROADCAST_ADDRESS[0]="255.255.255.255"
LANCONFIG_ARGS[0]="ether"
DHCP_ENABLE[0]=0
393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411

				ULTRIX

Now that we have Ultrix packet filter support, the DHCP Distribution
on Ultrix should be pretty trouble-free.  However, one thing you do
need to be aware of is that it now requires that the pfilt device be
configured into your kernel and present in /dev.  If you type ``man
packetfilter'', you will get some information on how to configure your
kernel for the packet filter (if it isn't already) and how to make an
entry for it in /dev.

			       FreeBSD

Versions of FreeBSD prior to 2.2 have a bug in BPF support in that the
ethernet driver swaps the ethertype field in the ethernet header
downstream from BPF, which corrupts the output packet.   If you are
running a version of FreeBSD prior to 2.2, and you find that dhcpd
can't communicate with its clients, you should #define BROKEN_FREEBSD_BPF 
in site.h and recompile.
Ted Lemon's avatar
Ted Lemon committed
412

413 414 415 416 417 418
Modern versions of FreeBSD include the ISC DHCP 3.0 client as part of
the base system, and the full distribution (for the DHCP server and
relay agent) is available from the Ports Collection in
/usr/ports/net/isc-dhcp3, or as a package on FreeBSD installation
CDROMs.

419
			      NeXTSTEP
Ted Lemon's avatar
Ted Lemon committed
420 421

The NeXTSTEP support uses the NeXTSTEP Berkeley Packet Filter
Ted Lemon's avatar
Ted Lemon committed
422 423
extension, which is not included in the base NextStep system.  You
must install this extension in order to get dhcpd or dhclient to work.
Ted Lemon's avatar
Ted Lemon committed
424

Ted Lemon's avatar
Ted Lemon committed
425 426
			       SOLARIS

427 428 429 430 431 432
There are two known issues seen when compiling using the Sun compiler.

The first is that older Sun compilers generate an error on some of
our uses of the flexible array option.  Newer versions only generate
a warning, which can be safely ignored.  If you run into this error
("type of struct member "buf" can not be derived from structure with
433 434
flexible array member"), upgrade your tools to  Oracle Solaris Studio 
(previously Sun Studio) 12 or something newer.
435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451

The second is the interaction between the configure script and the
makefiles for the Bind libraries.  Currently we don't pass all
environment variables between the DHCP configure and the Bind configure.

If you attempt to specify the compiler you wish to use like this:

	CC=/opt/SUNWspro/bin/cc ./configure

"make" may not build the Bind libraries with that compiler.

In order to use the same compiler for Bind and DHCP we suggest the
following commands:

	CC=/opt/SUNWspro/bin/cc ./configure
	CC=/opt/SUNWspro/bin/cc make

452 453 454 455 456 457 458 459 460 461 462 463 464
				Solaris 11

We have integrated a patch from Oracle to use sockets instead of
DLPI on Solaris 11.  This functionality was written for use with
Solaris Studio 12.2 and requires the system/header package.

By default this code is disabled in order to minimize disruptions
for current users.  In order to enable this code you will need to
enable both USE_SOCKETS and USE_V4_PKTINFO as part of the
configuration step.  The command line would be something like:

	  ./configure --enable-use-sockets --enable-ipv4-pktinfo

Shawn Routhier's avatar
Shawn Routhier committed
465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494
				Solaris 11 and ATF

We have reports that ATF 0.15 and 0.16 do not build on Solaris 11.  The
following changes to the ATF source code appear to fix this issue:

diff -ru atf-0.15/atf-c/tp_test.c atf-0.15-patched/atf-c/tp_test.c
--- atf-0.15/atf-c/tp_test.c 2011-12-06 06:31:11.000000000 +0100
+++ atf-0.15-patched/atf-c/tp_test.c 2012-06-19 15:54:57.000000000 +0200
@@ -28,6 +28,7 @@
*/

#include <string.h>
+#include <stdio.h>
#include <unistd.h>

#include <atf-c.h>

diff -ru atf-0.15/atf-run/requirements.cpp atf-0.15-patched/atf-run/requirements.cpp
--- atf-0.15/atf-run/requirements.cpp 2012-01-13 20:44:25.000000000 +0100
+++ atf-0.15-patched/atf-run/requirements.cpp 2012-06-19 15:41:51.000000000 +0200
@@ -29,7 +29,7 @@

extern "C" {
#include <sys/param.h>
-#include <sys/sysctl.h>
+//#include <sys/sysctl.h>
}

#include <cerrno>

495 496
				Other Solaris Items

Ted Lemon's avatar
Ted Lemon committed
497 498 499
One problem which has been observed and is not fixed in this
patchlevel has to do with using DLPI on Solaris machines.  The symptom
of this problem is that the DHCP server never receives any requests.
500 501 502 503 504
This has been observed with Solaris 2.6 and Solaris 7 on Intel x86
systems, although it may occur with other systems as well.  If you
encounter this symptom, and you are running the DHCP server on a
machine with a single broadcast network interface, you may wish to
edit the includes/site.h file and uncomment the #define USE_SOCKETS
505 506 507 508 509 510 511
line.  Then type ``make clean; make''.  As an alternative workaround,
it has been reported that running 'snoop' will cause the dhcp server
to start receiving packets.  So the practice reported to us is to run
snoop at dhcpd startup time, with arguments to cause it to receive one
packet and exit.

	snoop -c 1 udp port 67 > /dev/null &
Ted Lemon's avatar
Ted Lemon committed
512 513 514 515

The DHCP client on Solaris will only work with DLPI.  If you run it
and it just keeps saying it's sending DHCPREQUEST packets, but never
gets a response, you may be having DLPI trouble as described above.
516 517 518 519 520 521 522
If so, we have no solution to offer at this time, aside from the above
workaround which should also work here.  Also, because Solaris requires
you to "plumb" an interface before it can be detected by the DHCP client,
you must either specify the name(s) of the interface(s) you want to
configure on the command line, or must plumb the interfaces prior to
invoking the DHCP client.  This can be done with ``ifconfig iface plumb'',
where iface is the name of the interface (e.g., ``ifconfig hme0 plumb'').
Ted Lemon's avatar
Ted Lemon committed
523 524 525

It should be noted that Solaris versions from 2.6 onward include a
DHCP client that you can run with ``/sbin/ifconfig iface dhcp start''
526 527 528 529
rather than using the ISC DHCP client, including DHCPv6.  Consequently,
we don't believe there is a need for the client to run on Solaris, and
have not engineered the needed DHCPv6 modifications for the dhclient-script.
If you feel this is in error, or have a need, please contact us.
Ted Lemon's avatar
Ted Lemon committed
530

531 532 533 534 535 536 537 538
				AIX

The AIX support uses the BSD socket API, which cannot differentiate on
which network interface a broadcast packet was received; thus the DHCP
server and relay will work only on a single interface.  (They do work
on multi-interface machines if configured to listen on only one of the
interfaces.)

Shawn Routhier's avatar
Shawn Routhier committed
539
We have reports of Windows XP clients having difficulty retrieving
Shawn Routhier's avatar
Shawn Routhier committed
540 541 542 543 544 545 546 547 548 549 550 551 552 553
addresses from a server running on an AIX machine.  This issue
was traced to the client requiring messages be sent to the all ones
broadcast address (255.255.255.255) while the AIX server was sending 
to 192.168.0.255.

You may be able to solve this by including a relay between the client
and server with the relay configured to use a broadcast of all-ones.

A second option that worked for AIX 5.1 but doesn't seem to work for
AIX 5.3 was to:
	create a host file entry for all-ones (255.255.255.255)
and then add a route:
	route add -host all-ones -interface <local-ip-address>

554 555 556 557
The ISC DHCP distribution does not include a dhclient-script for AIX--
AIX comes with a DHCP client.  Contribution of a working dhclient-script
for AIX would be welcome.

Shawn Routhier's avatar
Shawn Routhier committed
558

559 560 561 562 563 564 565 566 567
			       MacOS X

The MacOS X system uses a TCP/IP stack derived from FreeBSD with a
user-friendly interface named the System Configuration Framework.
As it includes a builtin DHCPv4 client (you are better just using that),
this text is only about the DHCPv6 client (``dhclient -6 ...'').  The DNS
configuration (domain search list and name servers' addresses) is managed
by a System Configuration agent, not by /etc/resolv.conf (which is a link
to /var/run/resolv.conf, which itself only reflects the internal state;
568
the System Configuration framework's Dynamic Store).
569

570 571 572 573 574 575 576 577 578 579
This means that modifying resolv.conf directly doesn't have the
intended effect, instead the macos script sample creates its own
resolv.conf.dhclient6 in /var/run, and inserts the contents of this
file into the Dynamic Store.

When updating the address configuration the System Configuration
framework expects the prefix and a default router along with the
configured address. As this extra information is not available via
the DHCPv6 protocol the System Configuration framework isn't usable
for address configuration, instead ifconfig is used directly.
580 581

Note the Dynamic Store (from which /var/run/resolv.conf is built) is
582 583 584
recomputed from scratch when the current location/set is changed.
Running the dhclient-script reinstalls the resolv.conf.dhclient6
configuration.
585

586 587 588 589 590 591 592 593 594 595 596 597

			       ATF

Please see the file DHCP/doc/devel/atf.dox for a description of building
and using these tools.  

The optional unit tests use ATF (Automated Testing Framework) including
the atf-run and atf-report tools. ATF deprecated these tools in
version 0.19 and removed these tools from its sources in version 0.20,
requiring you to get an older version, use Kyua with an ATF compatibility
package or use the version included in the Bind sources.

Ted Lemon's avatar
Ted Lemon committed
598 599
			       SUPPORT

600 601
The Internet Systems Consortium DHCP server is developed and distributed
by ISC in the public trust, thanks to the generous donations of its
602
sponsors.  ISC now also offers commercial quality support contracts for
603 604 605
ISC DHCP, more information about ISC Support Contracts can be found at
the following URL:

606
	https://www.isc.org/services/support/
607

608 609 610 611 612
Please understand that we may not respond to support inquiries unless
you have a support contract.  ISC will continue its practice of always
responding to critical items that effect the entire community, and
responding to all other requests for support upon ISC's mailing lists
on a best-effort basis.
613 614

However, ISC DHCP has attracted a fairly sizable following on the
Shane Kerr's avatar
Shane Kerr committed
615
Internet, which means that there are a lot of knowledgeable users who
616 617 618
may be able to help you if you get stuck.  These people generally
read the dhcp-users@isc.org mailing list.  Be sure to provide as much
detail in your query as possible.
619

620 621
If you are going to use ISC DHCP, you should probably subscribe to
the dhcp-users or dhcp-announce mailing lists.
622

623 624 625 626 627 628
WHERE TO SEND FEATURE REQUESTS: We like to hear your feedback.  We may
not respond to it all the time, but we do read it.  If ISC DHCP doesn't
work well for you, or you have an idea that would improve it for your
use, please send your suggestion to dhcp-suggest@isc.org.  This is also
an excellent place to send patches that add new features.

629 630 631 632
WHERE TO REPORT BUGS: If you want the act of sending in a bug report
to result in you getting help in the form of a fixed piece of
software, you are asking for help.  Your bug report is helpful to us,
but fundamentally you are making a support request, so please use the
Ted Lemon's avatar
Ted Lemon committed
633 634
addresses described in the previous paragraphs.  If you are _sure_ that
your problem is a bug, and not user error, or if your bug report
635 636 637
includes a patch, you can send it to our ticketing system at
dhcp-bugs@isc.org.  If you have not received a notice that the ticket
has been resolved, then we're still working on it.
638

639 640
PLEASE DO NOT REPORT BUGS IN OLD SOFTWARE RELEASES!  Fetch the latest
release and see if the bug is still in that version of the software,
Tomek Mrugalski's avatar
Tomek Mrugalski committed
641 642 643 644
and if it is still present, _then_ report it.  ISC release versions 
always have three numbers, for example: 1.2.3.  The 'major release' is 
1 here, the 'minor release' is 2, and the 'maintenance release' is 3.  
ISC will accept bug reports against the most recent two major.minor
645 646 647 648 649 650 651 652 653 654
releases: for example, 1.0.0 and 0.9.0, but not 0.8.* or prior.

PLEASE take a moment to determine where the ISC DHCP distribution
that you're using came from.  ISC DHCP is sometimes heavily modified
by integrators in various operating systems - it's not that we
feel that our software is perfect and incapable of having bugs, but
rather that it is very frustrating to find out after many days trying
to help someone that the sources you're looking at aren't what they're
running.  When in doubt, please retrieve the source distribution from
ISC's web page and install it.
655

656
		HOW TO REPORT BUGS OR REQUEST HELP
657

658 659 660
When you report bugs or ask for help, please provide us complete
information.  A list of information we need follows.  Please read it
carefully, and put all the information you can into your initial bug
661 662
report.  This will save us a great deal of time and more informative
bug reports are more likely to get handled more quickly overall.
663

Ted Lemon's avatar
Ted Lemon committed
664
      1.  The specific operating system name and version of the
665
	  machine on which the DHCP server or client is running.
Ted Lemon's avatar
Ted Lemon committed
666
      2.  The specific operating system name and version of the
667 668
	  machine on which the client is running, if you are having
	  trouble getting a client working with the server.
Ted Lemon's avatar
Ted Lemon committed
669
      3.  If you're running Linux, the version number we care about is
670 671 672 673 674 675 676 677
	  the kernel version and maybe the library version, not the
	  distribution version - e.g., while we don't mind knowing
	  that you're running Redhat version mumble.foo, we must know
	  what kernel version you're running, and it helps if you can
	  tell us what version of the C library you're running,
	  although if you don't know that off the top of your head it
	  may be hard for you to figure it out, so don't go crazy
	  trying.
Ted Lemon's avatar
Ted Lemon committed
678
      4.  The specific version of the DHCP distribution you're
679
	  running, as reported by dhcpd -t.
Ted Lemon's avatar
Ted Lemon committed
680
      5.  Please explain the problem carefully, thinking through what
681 682
	  you're saying to ensure that you don't assume we know
	  something about your situation that we don't know.
683 684
      6.  Include your dhcpd.conf and dhcpd.leases file as MIME attachments
	  if they're not over 100 kilobytes in size each.  If they are
685
	  this large, please make them available to us, e.g., via a hidden
686 687 688
	  http:// URL or FTP site.  If you're not comfortable releasing
	  this information due to sensitive contents, you may encrypt
	  the file to our release signing key, available on our website.
Ted Lemon's avatar
Ted Lemon committed
689
      7.  Include a log of your server or client running until it
690 691 692 693 694 695 696
	  encounters the problem - for example, if you are having
	  trouble getting some client to get an address, restart the
	  server with the -d flag and then restart the client, and
	  send us what the server prints.   Likewise, with the client,
	  include the output of the client as it fails to get an
	  address or otherwise does the wrong thing.   Do not leave
	  out parts of the output that you think aren't interesting.
Ted Lemon's avatar
Ted Lemon committed
697
      8.  If the client or server is dumping core, please run the
698 699 700
	  debugger and get a stack trace, and include that in your
	  bug report.   For example, if your debugger is gdb, do the
	  following:
701 702 703 704 705 706 707 708

		gdb dhcpd dhcpd.core
		(gdb) where
		      [...]
		(gdb) quit

	  This assumes that it's the dhcp server you're debugging, and
	  that the core file is in dhcpd.core.
Ted Lemon's avatar
Ted Lemon committed
709

710
Please see https://www.isc.org/dhcp/ for details on how to subscribe
711
to the ISC DHCP mailing lists.
712

713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728
			       HISTORY

ISC DHCP was originally written by Ted Lemon under a contract with
Vixie Labs with the goal of being a complete reference implementation
of the DHCP protocol.  Funding for this project was provided by
Internet Systems Consortium. The first release of the ISC DHCP
distribution in December 1997 included just the DHCP server.
Release 2 in June 1999 added a DHCP client and a BOOTP/DHCP relay
agent. DHCP 3 was released in October 2001 and included DHCP failover
support, OMAPI, Dynamic DNS, conditional behaviour, client classing,
and more. Version 3 of the DHCP server was funded by Nominum, Inc.
The 4.0 release in December 2007 introduced DHCPv6 protocol support
for the server and client.

This product includes cryptographic software written
by Eric Young (eay@cryptsoft.com).