Tentative (works with distcheck, with-libbind to be checked

Makefile.am

@@ -22,7 +22,7 @@ EXTRA_DIST = RELNOTES LICENSE \
 	     doc/examples/dhclient-dhcpv6.conf doc/examples/dhcpd-dhcpv6.conf \
 	     doc/devel/arch.dox doc/devel/atf.dox doc/devel/contrib.dox \
 	     doc/devel/debug.dox doc/devel/isc-logo.jpg doc/devel/mainpage.dox \
-	     doc/devel/omapi.dox doc/devel/qa.dox util/bindvar.sh \
+	     doc/devel/omapi.dox doc/devel/qa.dox \
 	     bind/Makefile.in bind/bind.tar.gz bind/version.tmp \
 	     common/tests/Atffile server/tests/Atffile
 

Makefile.in

@@ -362,7 +362,7 @@ EXTRA_DIST = RELNOTES LICENSE \
 	     doc/examples/dhclient-dhcpv6.conf doc/examples/dhcpd-dhcpv6.conf \
 	     doc/devel/arch.dox doc/devel/atf.dox doc/devel/contrib.dox \
 	     doc/devel/debug.dox doc/devel/isc-logo.jpg doc/devel/mainpage.dox \
-	     doc/devel/omapi.dox doc/devel/qa.dox util/bindvar.sh \
+	     doc/devel/omapi.dox doc/devel/qa.dox \
 	     bind/Makefile.in bind/bind.tar.gz bind/version.tmp \
 	     common/tests/Atffile server/tests/Atffile
 

configure

@@ -627,6 +627,8 @@ LTLIBOBJS
 LIBOBJS
 LDAP_CFLAGS
 LDAP_LIBS
+BINDVERSION
+BINDBIND
 BINDSRCDIR
 BINDDIR
 ac_prefix_program
@@ -1473,8 +1475,7 @@ Optional Packages:
                           File for dhcrelay6 process information (default is
                           LOCALSTATEDIR/run/dhcrelay6.pid)
   --with-randomdev=PATH   Path for random device (default is /dev/random)
-  --with-libbind=PATH     bind includes and libraries are in PATH (default is
-                          ./bind)
+  --with-libbind=PATH     bind includes and libraries are in PATH
   --with-ldap             enable OpenLDAP support in dhcpd (default is no)
   --with-ldapcrypto       enable OpenLDAP crypto support in dhcpd (default is
                           no)
@@ -6822,8 +6823,11 @@ $as_echo "#define VLAN_TCI_PRESENT 1" >>confdefs.h
 fi
 
 
+# bind/Makefile.in is not from automake so we need 2 sets of variables
 BINDDIR=
 BINDSRCDIR=
+BINDBIND=
+BINDVERSION=
 
 # Check whether --with-libbind was given.
 if test "${with_libbind+set}" = set; then :
@@ -6834,31 +6838,33 @@ fi
 
 case "$use_libbind" in
 yes)
-	BINDDIR="\${top_srcdir}/bind"
-	BINDSRCDIR="\${top_srcdir}/bind"
+	as_fn_error $? "PATH is required in --with-libbind=PATH" "$LINENO" 5
 	;;
 no)
 	BINDDIR="\${top_srcdir}/bind"
 	BINDSRCDIR="\${top_srcdir}/bind"
+	if test ! -d "$srcdir/bind"; then
+		as_fn_error $? "Where to find or build bind includes and libraries must be specified" "$LINENO" 5
+	fi
+	if test ! -f "$srcdir/bind/version.tmp"; then
+		as_fn_error $? "Cannot find $srcdir/bind/version.tmp" "$LINENO" 5
+	fi
+	my_abs_srcdir=`cd $srcdir && pwd`
+	BINDBIND="${my_abs_srcdir}/bind"
+	. "$srcdir/bind/version.tmp"
+	BINDVERSION=${MAJORVER}.${MINORVER}.${PATCHVER}${RELEASETYPE}${RELEASEVER}
+	ac_config_files="$ac_config_files $srcdir/bind/Makefile"
+
 	;;
 *)
 	BINDDIR="$use_libbind"
-	if test ! -d "$srcdir/bind"; then
-		# no bind directory, create it with a fake Makefile.in
-		# (AC_CONFIG_FILES and top Makefile refer to it so
-		# it must exits)
-		mkdir $srcdir/bind
-		cat > $srcdir/bind/Makefile.in << EOF
-# placeholder
-all check clean distclean distdir install uninstall:
-
-EOF
-	fi
 	;;
 esac
 
 
 
+
+
 # OpenLDAP support.
 
 # Check whether --with-ldap was given.
@@ -7240,7 +7246,7 @@ $as_echo "#define FLEXIBLE_ARRAY_MEMBER /**/" >>confdefs.h
   fi
 
 
-ac_config_files="$ac_config_files Makefile $srcdir/bind/Makefile client/Makefile client/tests/Makefile common/Makefile common/tests/Makefile dhcpctl/Makefile includes/Makefile omapip/Makefile relay/Makefile server/Makefile tests/Makefile tests/unittest.sh server/tests/Makefile doc/devel/doxyfile"
+ac_config_files="$ac_config_files Makefile client/Makefile client/tests/Makefile common/Makefile common/tests/Makefile dhcpctl/Makefile includes/Makefile omapip/Makefile relay/Makefile server/Makefile tests/Makefile tests/unittest.sh server/tests/Makefile doc/devel/doxyfile"
 
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
@@ -7986,8 +7992,8 @@ do
   case $ac_config_target in
     "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
     "includes/config.h") CONFIG_HEADERS="$CONFIG_HEADERS includes/config.h" ;;
-    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
     "$srcdir/bind/Makefile") CONFIG_FILES="$CONFIG_FILES $srcdir/bind/Makefile" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
     "client/Makefile") CONFIG_FILES="$CONFIG_FILES client/Makefile" ;;
     "client/tests/Makefile") CONFIG_FILES="$CONFIG_FILES client/tests/Makefile" ;;
     "common/Makefile") CONFIG_FILES="$CONFIG_FILES common/Makefile" ;;
@@ -8697,16 +8703,6 @@ else
 	DHCP_VERSIONS="DHCPv4"
 fi
 
-(cd $srcdir
-    sh util/bindvar.sh
-    if test $? -ne 0; then
-        as_fn_error $? "*** util/bindvar.sh failed" "$LINENO" 5
-    fi
-)
-if test $? -ne 0; then
-    exit $?
-fi
-
 cat > config.report << END
 
      ISC DHCP source configure results:

configure.ac

@@ -679,38 +679,41 @@ AC_CHECK_MEMBER(struct tpacket_auxdata.tp_vlan_tci,
     [AC_DEFINE([VLAN_TCI_PRESENT], [1], [tpacket_auxdata.tp_vlan_tci present])]
     ,, [#include <linux/if_packet.h>])
 
+# bind/Makefile.in is not from automake so we need 2 sets of variables
 BINDDIR=
 BINDSRCDIR=
+BINDBIND=
+BINDVERSION=
 AC_ARG_WITH(libbind,
-	AS_HELP_STRING([--with-libbind=PATH],[bind includes and libraries are in PATH
-		        (default is ./bind)]),
+	AS_HELP_STRING([--with-libbind=PATH],[bind includes and libraries are in PATH]),
 	use_libbind="$withval", use_libbind="no")
 case "$use_libbind" in
 yes)
-	BINDDIR="\${top_srcdir}/bind"
-	BINDSRCDIR="\${top_srcdir}/bind"
+	AC_MSG_ERROR([PATH is required in --with-libbind=PATH])
 	;;
 no)
 	BINDDIR="\${top_srcdir}/bind"
 	BINDSRCDIR="\${top_srcdir}/bind"
+	if test ! -d "$srcdir/bind"; then
+		AC_MSG_ERROR([Where to find or build bind includes and libraries must be specified])
+	fi
+	if test ! -f "$srcdir/bind/version.tmp"; then
+		AC_MSG_ERROR([Cannot find $srcdir/bind/version.tmp])
+	fi
+	my_abs_srcdir=`cd $srcdir && pwd`
+	BINDBIND="${my_abs_srcdir}/bind"
+	. "$srcdir/bind/version.tmp"
+	BINDVERSION=${MAJORVER}.${MINORVER}.${PATCHVER}${RELEASETYPE}${RELEASEVER}
+	AC_CONFIG_FILES([$srcdir/bind/Makefile])
 	;;
 *)
 	BINDDIR="$use_libbind"
-	if test ! -d "$srcdir/bind"; then
-		# no bind directory, create it with a fake Makefile.in
-		# (AC_CONFIG_FILES and top Makefile refer to it so
-		# it must exits)
-		mkdir $srcdir/bind
-		cat > $srcdir/bind/Makefile.in << EOF
-# placeholder
-all check clean distclean distdir install uninstall:
-
-EOF
-	fi
 	;;
 esac
 AC_SUBST(BINDDIR)
 AC_SUBST(BINDSRCDIR)
+AC_SUBST(BINDBIND)
+AC_SUBST(BINDVERSION)
 
 # OpenLDAP support.
 AC_ARG_WITH(ldap,
@@ -805,7 +808,6 @@ AC_C_FLEXIBLE_ARRAY_MEMBER
 
 AC_CONFIG_FILES([
   Makefile
-  $srcdir/bind/Makefile
   client/Makefile
   client/tests/Makefile
   common/Makefile
@@ -830,16 +832,6 @@ else
 	DHCP_VERSIONS="DHCPv4"
 fi
 
-(cd $srcdir
-    sh util/bindvar.sh
-    if test $? -ne 0; then
-        AC_MSG_ERROR([*** util/bindvar.sh failed])
-    fi
-)
-if test $? -ne 0; then
-    exit $?
-fi
-
 cat > config.report << END
 
      ISC DHCP source configure results:

util/Makefile.bind.in

@@ -15,15 +15,8 @@
 
 # Configure and build the bind libraries for use by DHCP
 
-include ./version.tmp
-version=${MAJORVER}.${MINORVER}.${PATCHVER}${RELEASETYPE}${RELEASEVER}
-
-# bindvar.tmp is constructed by configure, it has the paths for bind
-# if GMAKE is blank the shell script couldn't find a gmake to use.
-# binddir=
-# GMAKE=
-include ./bindvar.tmp
-
+binddir=@BINDBIND@
+version=@BINDVERSION@
 bindsrcdir=bind-${version}
 
 bindconfig = --disable-kqueue --disable-epoll --disable-devpoll \
@@ -47,11 +40,6 @@ bind1:
 		gunzip -c bind.tar.gz | tar xf - ;          \
 	fi
 
-	@if test -z "${GMAKE}"; then                        \
-		echo "unable to find gmake" 1>&2 ;          \
-		exit 1;                                     \
-	fi
-
 # Configure the export libraries
 # Currently disable the epoll, devpoll and kqueue options as they
 # don't interact well with the DHCP code.
@@ -74,7 +62,7 @@ atf:
 	else							      \
 		echo Building ATF support ;			      \
 		(cd ${bindsrcdir}/unit;				      \
-		 MAKE=${GMAKE} ${GMAKE} atf > ${binddir}/build.log ;  \
+		 $(MAKE) atf > ${binddir}/build.log ;		      \
 		 cp -rp atf ${binddir}) ;			      \
 	fi
 
@@ -90,11 +78,11 @@ bind2-noguest:
 		echo Building BIND Export libraries - this takes some time. ;\
 		(cd ${bindsrcdir}/lib/export ;                               \
 		  echo building in `pwd` ;                                   \
-		  MAKE=${GMAKE} ${GMAKE} >> ${binddir}/build.log) ;          \
+		  $(MAKE) >> ${binddir}/build.log) ;			     \
                                                                              \
 		echo Installing BIND Export libraries to ${binddir}. ;       \
 		(cd ${bindsrcdir}/lib/export ;                               \
-		  MAKE=${GMAKE} ${GMAKE} install > ${binddir}/install.log) ; \
+		  $(MAKE) install > ${binddir}/install.log) ;		     \
 	fi
 
 bind2-hostgen:
@@ -104,16 +92,16 @@ bind2-hostgen:
 		echo Bind export libraries already installed ;               \
 	else                                                                 \
 		echo Building BIND Export libraries - this takes some time. ;\
-		(cd ${bindsrcdir}/lib/export/dns ; \
-		 echo building gen using ${BUILD_CC} in `pwd` ; \
-		 MAKE=${GMAKE} ${GMAKE} CC=${BUILD_CC} CFLAGS=${BUILD_CFLAGS} CPPFLAGS=${BUILD_CPPFLAGS} LDFLAGS=${BUILD_LDFLAGS} LIBS=${BUILD_LIBS} gen >> ${binddir}/build.log) ; \
+		(cd ${bindsrcdir}/lib/export/dns ;			     \
+		 echo building gen using ${BUILD_CC} in `pwd` ;		     \
+		 $(MAKE) CC=${BUILD_CC} CFLAGS=${BUILD_CFLAGS} CPPFLAGS=${BUILD_CPPFLAGS} LDFLAGS=${BUILD_LDFLAGS} LIBS=${BUILD_LIBS} gen >> ${binddir}/build.log) ; \
 		(cd ${bindsrcdir}/lib/export ;                               \
 		  echo building in `pwd` ;                                   \
-		  MAKE=${GMAKE} ${GMAKE} >> ${binddir}/build.log) ;          \
+		  $(MAKE) >> ${binddir}/build.log) ;			     \
                                                                              \
 		echo Installing BIND Export libraries to ${binddir}. ;       \
 		(cd ${bindsrcdir}/lib/export ;                               \
-		  MAKE=${GMAKE} ${GMAKE} install > ${binddir}/install.log) ; \
+		  $(MAKE) install > ${binddir}/install.log) ;		     \
 	fi
 
 clean:

util/bindvar.sh

-#!/bin/sh
-#
-# Copyright (C) 2009,2015  Internet Systems Consortium, Inc. ("ISC")
-#
-# Permission to use, copy, modify, and/or distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
-# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-# AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
-# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-# PERFORMANCE OF THIS SOFTWARE.
-
-# $Id: bindvar.sh,v 1.2 2009/12/02 20:43:52 sar Exp $
-
-# Create a file with the base directory and gmake path for
-# use by the bind/Makefile, we do this to minimize portability
-# concerns.
-
-# Bind requires a GNU style make to compile, if we can't find one
-# exit with a non-zero status, otherwise exit with success (i.e. 0)
-
-binddir=`pwd`
-gmake=
-for x in gmake gnumake make; do
-	if $x --version 2>/dev/null | grep GNU > /dev/null; then
-		gmake=$x
-		break;
-	fi
-done
-
-if [ -z $gmake ]
-then
-    echo "$0: Building Bind requires a GNU style make tool and none were found in your path. We tried gmake, gnumake, and make."
-    exit 1
-fi
-
-cat <<EOF > bind/bindvar.tmp
-binddir=$binddir/bind
-GMAKE=$gmake
-EOF
-
-exit 0