dhcp4_srv_unittest.cc 56.6 KB
Newer Older
Tomek Mrugalski's avatar
Tomek Mrugalski committed
1
// Copyright (C) 2011-2013  Internet Systems Consortium, Inc. ("ISC")
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
//
// Permission to use, copy, modify, and/or distribute this software for any
// purpose with or without fee is hereby granted, provided that the above
// copyright notice and this permission notice appear in all copies.
//
// THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
// REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
// AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
// INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
// LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
// OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
// PERFORMANCE OF THIS SOFTWARE.

#include <config.h>
#include <sstream>

18
#include <asiolink/io_address.h>
19
#include <dhcp/dhcp4.h>
20
#include <dhcp/iface_mgr.h>
21
#include <dhcp/option.h>
22
#include <dhcp/option4_addrlst.h>
23
#include <dhcp/option_custom.h>
24
#include <dhcp/option_int_array.h>
25 26
#include <dhcp/pkt_filter.h>
#include <dhcp/pkt_filter_inet.h>
27
#include <dhcp4/dhcp4_srv.h>
Tomek Mrugalski's avatar
Tomek Mrugalski committed
28
#include <dhcp4/dhcp4_log.h>
29 30 31 32
#include <dhcpsrv/cfgmgr.h>
#include <dhcpsrv/lease_mgr.h>
#include <dhcpsrv/lease_mgr_factory.h>
#include <dhcpsrv/utils.h>
33 34
#include <gtest/gtest.h>

35 36
#include <boost/scoped_ptr.hpp>

37 38 39 40
#include <fstream>
#include <iostream>

#include <arpa/inet.h>
41 42 43 44

using namespace std;
using namespace isc;
using namespace isc::dhcp;
45
using namespace isc::asiolink;
46 47 48 49

namespace {

class NakedDhcpv4Srv: public Dhcpv4Srv {
50
    // "Naked" DHCPv4 server, exposes internal fields
51
public:
52 53 54

    /// @brief Constructor.
    ///
55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74
    /// This constructor disables default modes of operation used by the
    /// Dhcpv4Srv class:
    /// - Send/receive broadcast messages through sockets on interfaces
    /// which support broadcast traffic.
    /// - Direct DHCPv4 traffic - communication with clients which do not
    /// have IP address assigned yet.
    ///
    /// Enabling these modes requires root privilges so they must be
    /// disabled for unit testing.
    ///
    /// Note, that disabling broadcast options on sockets does not impact
    /// the operation of these tests because they use local loopback
    /// interface which doesn't have broadcast capability anyway. It rather
    /// prevents setting broadcast options on other (broadcast capable)
    /// sockets which are opened on other interfaces in Dhcpv4Srv constructor.
    ///
    /// The Direct DHCPv4 Traffic capability can be disabled here because
    /// it is tested with PktFilterLPFTest unittest. The tests which belong
    /// to PktFilterLPFTest can be enabled on demand when root privileges can
    /// be guaranteed.
75 76 77
    ///
    /// @param port port number to listen on; the default value 0 indicates
    /// that sockets should not be opened.
78
    NakedDhcpv4Srv(uint16_t port = 0)
79
        : Dhcpv4Srv(port, "type=memfile", false, false) {
80
    }
81

82
    using Dhcpv4Srv::adjustRemoteAddr;
83 84 85 86 87 88
    using Dhcpv4Srv::processDiscover;
    using Dhcpv4Srv::processRequest;
    using Dhcpv4Srv::processRelease;
    using Dhcpv4Srv::processDecline;
    using Dhcpv4Srv::processInform;
    using Dhcpv4Srv::getServerID;
89 90 91
    using Dhcpv4Srv::loadServerID;
    using Dhcpv4Srv::generateServerID;
    using Dhcpv4Srv::writeServerID;
92
    using Dhcpv4Srv::sanityCheck;
93
    using Dhcpv4Srv::srvidToString;
94 95
};

96 97
static const char* SRVID_FILE = "server-id-test.txt";

98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132
/// @brief Dummy Packet Filtering class.
///
/// This class reports capability to respond directly to the
/// client which doesn't have address configured yet.
///
/// All packet and socket handling functions do nothing because
/// they are not used in unit tests.
class PktFilterTest : public PktFilter {
public:

    /// @brief Reports 'direct response' capability.
    ///
    /// @return always true.
    virtual bool isDirectResponseSupported() const {
        return (true);
    }

    /// Does nothing.
    virtual int openSocket(const Iface&, const IOAddress&, const uint16_t,
                           const bool, const bool) {
        return (0);
    }

    /// Does nothing.
    virtual Pkt4Ptr receive(const Iface&, const SocketInfo&) {
        return Pkt4Ptr();
    }

    /// Does nothing.
    virtual int send(const Iface&, uint16_t, const Pkt4Ptr&) {
        return (0);
    }

};

133 134
class Dhcpv4SrvTest : public ::testing::Test {
public:
135 136 137 138 139

    /// @brief Constructor
    ///
    /// Initializes common objects used in many tests.
    /// Also sets up initial configuration in CfgMgr.
140
    Dhcpv4SrvTest() {
141 142 143 144 145 146 147
        subnet_ = Subnet4Ptr(new Subnet4(IOAddress("192.0.2.0"), 24, 1000,
                                         2000, 3000));
        pool_ = Pool4Ptr(new Pool4(IOAddress("192.0.2.100"), IOAddress("192.0.2.110")));
        subnet_->addPool(pool_);

        CfgMgr::instance().deleteSubnets4();
        CfgMgr::instance().addSubnet4(subnet_);
148

149 150 151 152
        // Add Router option.
        Option4AddrLstPtr opt_routers(new Option4AddrLst(DHO_ROUTERS));
        opt_routers->setAddress(IOAddress("192.0.2.2"));
        subnet_->addOption(opt_routers, false, "dhcp4");
153

154 155
        // it's ok if that fails. There should not be such a file anyway
        unlink(SRVID_FILE);
156
    }
157

158
    /// @brief Add 'Parameter Request List' option to the packet.
159
    ///
160
    /// This function PRL option comprising the following option codes:
161 162 163 164 165 166 167 168 169 170 171 172 173 174
    /// - 5 - Name Server
    /// - 15 - Domain Name
    /// - 7 - Log Server
    /// - 8 - Quotes Server
    /// - 9 - LPR Server
    ///
    /// @param pkt packet to add PRL option to.
    void addPrlOption(Pkt4Ptr& pkt) {

        OptionUint8ArrayPtr option_prl =
            OptionUint8ArrayPtr(new OptionUint8Array(Option::V4,
                                                     DHO_DHCP_PARAMETER_REQUEST_LIST));

        // Let's request options that have been configured for the subnet.
175 176 177 178
        option_prl->addValue(DHO_DOMAIN_NAME_SERVERS);
        option_prl->addValue(DHO_DOMAIN_NAME);
        option_prl->addValue(DHO_LOG_SERVERS);
        option_prl->addValue(DHO_COOKIE_SERVERS);
179 180
        // Let's also request the option that hasn't been configured. In such
        // case server should ignore request for this particular option.
181
        option_prl->addValue(DHO_LPR_SERVERS);
182 183 184 185 186 187
        // And add 'Parameter Request List' option into the DISCOVER packet.
        pkt->addOption(option_prl);
    }

    /// @brief Configures options being requested in the PRL option.
    ///
188
    /// The lpr-servers option is NOT configured here although it is
189 190
    /// added to the 'Parameter Request List' option in the
    /// \ref addPrlOption. When requested option is not configured
191
    /// the server should not return it in its response. The goal
192 193 194 195 196 197 198 199 200 201 202 203
    /// of not configuring the requested option is to verify that
    /// the server will not return it.
    void configureRequestedOptions() {
        // dns-servers
        Option4AddrLstPtr
            option_dns_servers(new Option4AddrLst(DHO_DOMAIN_NAME_SERVERS));
        option_dns_servers->addAddress(IOAddress("192.0.2.1"));
        option_dns_servers->addAddress(IOAddress("192.0.2.100"));
        ASSERT_NO_THROW(subnet_->addOption(option_dns_servers, false, "dhcp4"));

        // domain-name
        OptionDefinition def("domain-name", DHO_DOMAIN_NAME, OPT_FQDN_TYPE);
204
        OptionCustomPtr option_domain_name(new OptionCustom(def, Option::V4));
205 206 207 208 209 210 211 212 213 214 215 216 217 218 219
        option_domain_name->writeFqdn("example.com");
        subnet_->addOption(option_domain_name, false, "dhcp4");

        // log-servers
        Option4AddrLstPtr option_log_servers(new Option4AddrLst(DHO_LOG_SERVERS));
        option_log_servers->addAddress(IOAddress("192.0.2.2"));
        option_log_servers->addAddress(IOAddress("192.0.2.10"));
        ASSERT_NO_THROW(subnet_->addOption(option_log_servers, false, "dhcp4"));

        // cookie-servers
        Option4AddrLstPtr option_cookie_servers(new Option4AddrLst(DHO_COOKIE_SERVERS));
        option_cookie_servers->addAddress(IOAddress("192.0.2.1"));
        ASSERT_NO_THROW(subnet_->addOption(option_cookie_servers, false, "dhcp4"));
    }

220 221 222
    /// @brief checks that the response matches request
    /// @param q query (client's message)
    /// @param a answer (server's message)
223
    void messageCheck(const Pkt4Ptr& q, const Pkt4Ptr& a) {
224 225 226 227 228 229 230
        ASSERT_TRUE(q);
        ASSERT_TRUE(a);

        EXPECT_EQ(q->getHops(),   a->getHops());
        EXPECT_EQ(q->getIface(),  a->getIface());
        EXPECT_EQ(q->getIndex(),  a->getIndex());
        EXPECT_EQ(q->getGiaddr(), a->getGiaddr());
231 232 233
        // When processing an incoming packet the remote address
        // is copied as a src address, and the source address is
        // copied as a remote address to the response.
234 235
        EXPECT_TRUE(q->getLocalHWAddr() == a->getLocalHWAddr());
        EXPECT_TRUE(q->getRemoteHWAddr() == a->getRemoteHWAddr());
236

237 238 239
        // Check that bare minimum of required options are there.
        // We don't check options requested by a client. Those
        // are checked elsewhere.
240 241 242 243 244
        EXPECT_TRUE(a->getOption(DHO_SUBNET_MASK));
        EXPECT_TRUE(a->getOption(DHO_ROUTERS));
        EXPECT_TRUE(a->getOption(DHO_DHCP_SERVER_IDENTIFIER));
        EXPECT_TRUE(a->getOption(DHO_DHCP_LEASE_TIME));
        EXPECT_TRUE(a->getOption(DHO_SUBNET_MASK));
245 246
        EXPECT_TRUE(a->getOption(DHO_DOMAIN_NAME));
        EXPECT_TRUE(a->getOption(DHO_DOMAIN_NAME_SERVERS));
247

248
        // Check that something is offered
249 250 251
        EXPECT_TRUE(a->getYiaddr().toText() != "0.0.0.0");
    }

252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272
    /// @brief Check that requested options are present.
    ///
    /// @param pkt packet to be checked.
    void optionsCheck(const Pkt4Ptr& pkt) {
        // Check that the requested and configured options are returned
        // in the ACK message.
        EXPECT_TRUE(pkt->getOption(DHO_DOMAIN_NAME))
            << "domain-name not present in the response";
        EXPECT_TRUE(pkt->getOption(DHO_DOMAIN_NAME_SERVERS))
            << "dns-servers not present in the response";
        EXPECT_TRUE(pkt->getOption(DHO_LOG_SERVERS))
            << "log-servers not present in the response";
        EXPECT_TRUE(pkt->getOption(DHO_COOKIE_SERVERS))
            << "cookie-servers not present in the response";
        // Check that the requested but not configured options are not
        // returned in the ACK message.
        EXPECT_FALSE(pkt->getOption(DHO_LPR_SERVERS))
            << "domain-name present in the response but it is"
            << " expected not to be present";
    }

273 274 275 276 277 278 279 280
    /// @brief generates client-id option
    ///
    /// Generate client-id option of specified length
    /// Ids with different lengths are sufficent to generate
    /// unique ids. If more fine grained control is required,
    /// tests generate client-ids on their own.
    /// Sets client_id_ field.
    /// @param size size of the client-id to be generated
281 282 283 284 285 286 287 288 289 290 291 292 293 294
    OptionPtr generateClientId(size_t size = 4) {

        OptionBuffer clnt_id(size);
        for (int i = 0; i < size; i++) {
            clnt_id[i] = 100 + i;
        }

        client_id_ = ClientIdPtr(new ClientId(clnt_id));

        return (OptionPtr(new Option(Option::V4, DHO_DHCP_CLIENT_IDENTIFIER,
                                     clnt_id.begin(),
                                     clnt_id.begin() + size)));
    }

295 296 297 298
    /// @brief generate hardware address
    ///
    /// @param size size of the generated MAC address
    /// @param pointer to Hardware Address object
Tomek Mrugalski's avatar
Tomek Mrugalski committed
299
    HWAddrPtr generateHWAddr(size_t size = 6) {
300
        const uint8_t hw_type = 123; // Just a fake number (typically 6=HTYPE_ETHER, see dhcp4.h)
Tomek Mrugalski's avatar
Tomek Mrugalski committed
301 302 303 304 305 306 307
        OptionBuffer mac(size);
        for (int i = 0; i < size; ++i) {
            mac[i] = 50 + i;
        }
        return (HWAddrPtr(new HWAddr(mac, hw_type)));
    }

308 309 310
    /// Check that address was returned from proper range, that its lease
    /// lifetime is correct, that T1 and T2 are returned properly
    /// @param rsp response to be checked
311 312
    /// @param subnet subnet that should be used to verify assigned address
    ///        and options
313 314
    /// @param t1_mandatory is T1 mandatory?
    /// @param t2_mandatory is T2 mandatory?
315
    void checkAddressParams(const Pkt4Ptr& rsp, const SubnetPtr subnet,
316 317
                            bool t1_mandatory = false,
                            bool t2_mandatory = false) {
318 319 320 321 322 323 324

        // Technically inPool implies inRange, but let's be on the safe
        // side and check both.
        EXPECT_TRUE(subnet->inRange(rsp->getYiaddr()));
        EXPECT_TRUE(subnet->inPool(rsp->getYiaddr()));

        // Check lease time
325 326
        OptionPtr opt = rsp->getOption(DHO_DHCP_LEASE_TIME);
        if (!opt) {
327 328
            ADD_FAILURE() << "Lease time option missing in response";
        } else {
329
            EXPECT_EQ(opt->getUint32(), subnet->getValid());
330 331 332
        }

        // Check T1 timer
333 334 335
        opt = rsp->getOption(DHO_DHCP_RENEWAL_TIME);
        if (opt) {
            EXPECT_EQ(opt->getUint32(), subnet->getT1());
336 337 338 339 340 341 342
        } else {
            if (t1_mandatory) {
                ADD_FAILURE() << "Required T1 option missing";
            }
        }

        // Check T2 timer
343 344 345
        opt = rsp->getOption(DHO_DHCP_REBINDING_TIME);
        if (opt) {
            EXPECT_EQ(opt->getUint32(), subnet->getT2());
346
        } else {
347
            if (t2_mandatory) {
348 349 350 351 352
                ADD_FAILURE() << "Required T2 option missing";
            }
        }
    }

353 354 355 356 357
    /// @brief Basic checks for generated response (message type and trans-id).
    ///
    /// @param rsp response packet to be validated
    /// @param expected_message_type expected message type
    /// @param expected_transid expected transaction-id
358 359 360 361 362 363 364
    void checkResponse(const Pkt4Ptr& rsp, uint8_t expected_message_type,
                       uint32_t expected_transid) {
        ASSERT_TRUE(rsp);
        EXPECT_EQ(expected_message_type, rsp->getType());
        EXPECT_EQ(expected_transid, rsp->getTransid());
    }

365 366 367 368 369 370
    /// @brief Checks if the lease sent to client is present in the database
    ///
    /// @param rsp response packet to be validated
    /// @param client_id expected client-identifier (or NULL)
    /// @param HWAddr expected hardware address (not used now)
    /// @param expected_addr expected address
371
    Lease4Ptr checkLease(const Pkt4Ptr& rsp, const OptionPtr& client_id,
372
                         const HWAddrPtr&, const IOAddress& expected_addr) {
373 374 375 376 377 378 379 380 381 382 383 384 385 386

        ClientIdPtr id;
        if (client_id) {
            OptionBuffer data = client_id->getData();
            id.reset(new ClientId(data));
        }

        Lease4Ptr lease = LeaseMgrFactory::instance().getLease4(expected_addr);
        if (!lease) {
            cout << "Lease for " << expected_addr.toText()
                 << " not found in the database backend.";
            return (Lease4Ptr());
        }

387 388
        EXPECT_EQ(rsp->getYiaddr().toText(), expected_addr.toText());

389 390 391 392 393 394 395 396 397
        EXPECT_EQ(expected_addr.toText(), lease->addr_.toText());
        if (client_id) {
            EXPECT_TRUE(*lease->client_id_ == *id);
        }
        EXPECT_EQ(subnet_->getID(), lease->subnet_id_);

        return (lease);
    }

398 399 400
    /// @brief Checks if server response (OFFER, ACK, NAK) includes proper server-id
    /// @param rsp response packet to be validated
    /// @param expected_srvid expected value of server-id
401
    void checkServerId(const Pkt4Ptr& rsp, const OptionPtr& expected_srvid) {
402 403 404 405 406 407
        // Check that server included its server-id
        OptionPtr opt = rsp->getOption(DHO_DHCP_SERVER_IDENTIFIER);
        ASSERT_TRUE(opt);
        EXPECT_EQ(opt->getType(), expected_srvid->getType() );
        EXPECT_EQ(opt->len(), expected_srvid->len() );
        EXPECT_TRUE(opt->getData() == expected_srvid->getData());
408 409
    }

410 411 412
    /// @brief Checks if server response (OFFER, ACK, NAK) includes proper client-id
    /// @param rsp response packet to be validated
    /// @param expected_clientid expected value of client-id
413 414
    void checkClientId(const Pkt4Ptr& rsp, const OptionPtr& expected_clientid) {
        // check that server included our own client-id
415 416 417 418 419
        OptionPtr opt = rsp->getOption(DHO_DHCP_CLIENT_IDENTIFIER);
        ASSERT_TRUE(opt);
        EXPECT_EQ(expected_clientid->getType(), opt->getType());
        EXPECT_EQ(expected_clientid->len(), opt->len());
        EXPECT_TRUE(expected_clientid->getData() == opt->getData());
420 421
    }

422 423 424
    /// @brief Tests if Discover or Request message is processed correctly
    ///
    /// @param msg_type DHCPDISCOVER or DHCPREQUEST
425
    void testDiscoverRequest(const uint8_t msg_type) {
426
        // Create an instance of the tested class.
427
        boost::scoped_ptr<NakedDhcpv4Srv> srv(new NakedDhcpv4Srv(0));
428 429

        // Initialize the source HW address.
430
        vector<uint8_t> mac(6);
431
        for (int i = 0; i < 6; ++i) {
432
            mac[i] = i * 10;
433
        }
434
        // Initialized the destination HW address.
435
        vector<uint8_t> dst_mac(6);
436
        for (int i = 0; i < 6; ++i) {
437 438
            dst_mac[i] = i * 20;
        }
439 440
        // Create a DHCP message. It will be used to simulate the
        // incoming message.
441
        boost::shared_ptr<Pkt4> req(new Pkt4(msg_type, 1234));
442 443
        // Create a response message. It will hold a reponse packet.
        // Initially, set it to NULL.
444
        boost::shared_ptr<Pkt4> rsp;
445
        // Set the name of the interface on which packet is received.
446
        req->setIface("eth0");
447
        // Set the interface index. It is just a dummy value and will
448
        // not be interpreted.
449
        req->setIndex(17);
450 451
        // Set the target HW address. This value is normally used to
        // construct the data link layer header.
452
        req->setRemoteHWAddr(1, 6, dst_mac);
453
        // Set the HW address. This value is set on DHCP level (in chaddr).
454
        req->setHWAddr(1, 6, mac);
455 456
        // Set local HW address. It is used to construct the data link layer
        // header.
457
        req->setLocalHWAddr(1, 6, mac);
458
        // Set target IP address.
459
        req->setRemoteAddr(IOAddress("192.0.2.55"));
460
        // Set relay address.
461
        req->setGiaddr(IOAddress("192.0.2.10"));
462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496

        // We are going to test that certain options are returned
        // in the response message when requested using 'Parameter
        // Request List' option. Let's configure those options that
        // are returned when requested.
        configureRequestedOptions();

        if (msg_type == DHCPDISCOVER) {
            ASSERT_NO_THROW(
                rsp = srv->processDiscover(req);
            );

            // Should return OFFER
            ASSERT_TRUE(rsp);
            EXPECT_EQ(DHCPOFFER, rsp->getType());

        } else {
            ASSERT_NO_THROW(
                rsp = srv->processRequest(req);
            );

            // Should return ACK
            ASSERT_TRUE(rsp);
            EXPECT_EQ(DHCPACK, rsp->getType());

        }

        messageCheck(req, rsp);

        // We did not request any options so these should not be present
        // in the RSP.
        EXPECT_FALSE(rsp->getOption(DHO_LOG_SERVERS));
        EXPECT_FALSE(rsp->getOption(DHO_COOKIE_SERVERS));
        EXPECT_FALSE(rsp->getOption(DHO_LPR_SERVERS));

497
        // Repeat the test but request some options.
498 499 500
        // Add 'Parameter Request List' option.
        addPrlOption(req);

501 502 503 504
        if (msg_type == DHCPDISCOVER) {
            ASSERT_NO_THROW(
                rsp = srv->processDiscover(req);
            );
505

506 507 508
            // Should return non-NULL packet.
            ASSERT_TRUE(rsp);
            EXPECT_EQ(DHCPOFFER, rsp->getType());
509

510 511 512 513 514 515 516 517 518 519
        } else {
            ASSERT_NO_THROW(
                rsp = srv->processRequest(req);
            );

            // Should return non-NULL packet.
            ASSERT_TRUE(rsp);
            EXPECT_EQ(DHCPACK, rsp->getType());

        }
520 521 522

        // Check that the requested options are returned.
        optionsCheck(rsp);
523

524 525
    }

526 527 528
    /// @brief This function cleans up after the test.
    virtual void TearDown() {

529
        CfgMgr::instance().deleteSubnets4();
530 531 532

        // Let's clean up if there is such a file.
        unlink(SRVID_FILE);
533

534 535 536
        // Close all open sockets.
        IfaceMgr::instance().closeSockets();

537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554
        // Some unit tests override the default packet filtering class, used
        // by the IfaceMgr. The dummy class, called PktFilterTest, reports the
        // capability to directly respond to the clients without IP address
        // assigned. This capability is not supported by the default packet
        // filtering class: PktFilterInet. Therefore setting the dummy class
        // allows to test scenarios, when server responds to the broadcast address
        // on client's request, despite having support for direct response.
        // The following call restores the use of original packet filtering class
        // after the test.
        try {
            IfaceMgr::instance().setPacketFilter(PktFilterPtr(new PktFilterInet()));

        } catch (const Exception& ex) {
            FAIL() << "Failed to restore the default (PktFilterInet) packet filtering"
                   << " class after the test. Exception has been caught: "
                   << ex.what();
        }
    }
555

556
    /// @brief A subnet used in most tests
557 558
    Subnet4Ptr subnet_;

559
    /// @brief A pool used in most tests
560 561
    Pool4Ptr pool_;

562
    /// @brief A client-id used in most tests
563
    ClientIdPtr client_id_;
564 565
};

Tomek Mrugalski's avatar
Tomek Mrugalski committed
566 567
// Sanity check. Verifies that both Dhcpv4Srv and its derived
// class NakedDhcpv4Srv can be instantiated and destroyed.
568 569
TEST_F(Dhcpv4SrvTest, basic) {

570
    // Check that the base class can be instantiated
571
    boost::scoped_ptr<Dhcpv4Srv> srv;
572 573
    ASSERT_NO_THROW(srv.reset(new Dhcpv4Srv(DHCP4_SERVER_PORT + 10000, "type=memfile",
                                            false, false)));
574
    srv.reset();
575 576 577 578 579
    // We have to close open sockets because further in this test we will
    // call the Dhcpv4Srv constructor again. This constructor will try to
    // set the appropriate packet filter class for IfaceMgr. This requires
    // that all sockets are closed.
    IfaceMgr::instance().closeSockets();
580

581
    // Check that the derived class can be instantiated
582 583
    boost::scoped_ptr<NakedDhcpv4Srv> naked_srv;
    ASSERT_NO_THROW(
584
        naked_srv.reset(new NakedDhcpv4Srv(DHCP4_SERVER_PORT + 10000)));
585
    EXPECT_TRUE(naked_srv->getServerID());
586 587
    // Close sockets again for the next test.
    IfaceMgr::instance().closeSockets();
588

589
    ASSERT_NO_THROW(naked_srv.reset(new NakedDhcpv4Srv(0)));
590
    EXPECT_TRUE(naked_srv->getServerID());
591 592
}

593 594 595
// This test verifies that the destination address of the response
// message is set to giaddr, when giaddr is set to non-zero address
// in the received message.
596 597 598
TEST_F(Dhcpv4SrvTest, adjustRemoteAddressRelay) {
    boost::scoped_ptr<NakedDhcpv4Srv> srv(new NakedDhcpv4Srv(0));

599
    // Create the instance of the incoming packet.
600
    boost::shared_ptr<Pkt4> req(new Pkt4(DHCPDISCOVER, 1234));
601
    // Set the giaddr to non-zero address as if it was relayed.
602
    req->setGiaddr(IOAddress("192.0.2.1"));
603 604
    // Set ciaddr to zero. This simulates the client which applies
    // for the new lease.
605
    req->setCiaddr(IOAddress("0.0.0.0"));
606 607 608 609 610 611 612
    // Clear broadcast flag.
    req->setFlags(0x0000);

    // Create a response packet. Assume that the new lease have
    // been created and new address allocated. This address is
    // stored in yiaddr field.
    boost::shared_ptr<Pkt4> resp(new Pkt4(DHCPOFFER, 1234));
613
    resp->setYiaddr(IOAddress("192.0.2.100"));
614 615
    // Clear the remote address.
    resp->setRemoteAddr(IOAddress("0.0.0.0"));
616

617
    // This function never throws.
618 619
    ASSERT_NO_THROW(srv->adjustRemoteAddr(req, resp));

620
    // Now the destination address should be relay's address.
621
    EXPECT_EQ("192.0.2.1", resp->getRemoteAddr().toText());
622 623 624 625 626 627

    // Let's do another test and set other fields: ciaddr and
    // flags. By doing it, we want to make sure that the relay
    // address will take precedence.
    req->setGiaddr(IOAddress("192.0.2.50"));
    req->setCiaddr(IOAddress("192.0.2.11"));
628
    req->setFlags(Pkt4::FLAG_BROADCAST_MASK);
629 630 631 632 633 634 635 636 637 638 639

    resp->setYiaddr(IOAddress("192.0.2.100"));
    // Clear remote address.
    resp->setRemoteAddr(IOAddress("0.0.0.0"));

    ASSERT_NO_THROW(srv->adjustRemoteAddr(req, resp));

    // Response should be sent back to the relay address.
    EXPECT_EQ("192.0.2.50", resp->getRemoteAddr().toText());
}

640 641 642 643
// This test verifies that the destination address of the response message
// is set to ciaddr when giaddr is set to zero and the ciaddr is set to
// non-zero address in the received message. This is the case when the
// client is in Renew or Rebind state.
644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661
TEST_F(Dhcpv4SrvTest, adjustRemoteAddressRenewRebind) {
    boost::scoped_ptr<NakedDhcpv4Srv> srv(new NakedDhcpv4Srv(0));

    // Create instance of the incoming packet.
    boost::shared_ptr<Pkt4> req(new Pkt4(DHCPDISCOVER, 1234));

    // Clear giaddr to simulate direct packet.
    req->setGiaddr(IOAddress("0.0.0.0"));
    // Set ciaddr to non-zero address. The response should be sent to this
    // address as the client is in renewing or rebinding state (it is fully
    // configured).
    req->setCiaddr(IOAddress("192.0.2.15"));
    // Let's configure broadcast flag. It should be ignored because
    // we are responding directly to the client having an address
    // and trying to extend his lease. Broadcast flag is only used
    // when new lease is acquired and server must make a decision
    // whether to unicast the response to the acquired address or
    // broadcast it.
662
    req->setFlags(Pkt4::FLAG_BROADCAST_MASK);
663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679

    // Create a response.
    boost::shared_ptr<Pkt4> resp(new Pkt4(DHCPOFFER, 1234));
    // Let's extend the lease for the client in such a way that
    // it will actually get different address. The response
    // should not be sent to this address but rather to ciaddr
    // as client still have ciaddr configured.
    resp->setYiaddr(IOAddress("192.0.2.13"));
    // Clear the remote address.
    resp->setRemoteAddr(IOAddress("0.0.0.0"));

    ASSERT_NO_THROW(srv->adjustRemoteAddr(req, resp));

    // Check that server responds to ciaddr
    EXPECT_EQ("192.0.2.15", resp->getRemoteAddr().toText());
}

680 681 682 683 684 685 686
// This test verifies that the destination address of the response message
// is set correctly when giaddr and ciaddr is zeroed in the received message
// and the new lease is acquired. The lease address is carried in the
// response message in the yiaddr field. In this case destination address
// of the response should be set to yiaddr if server supports direct responses
// to the client which doesn't have an address yet or broadcast if the server
// doesn't support direct responses.
687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736
TEST_F(Dhcpv4SrvTest, adjustRemoteAddressSelect) {
    boost::scoped_ptr<NakedDhcpv4Srv> srv(new NakedDhcpv4Srv(0));

    // Create instance of the incoming packet.
    boost::shared_ptr<Pkt4> req(new Pkt4(DHCPDISCOVER, 1234));

    // Clear giaddr to simulate direct packet.
    req->setGiaddr(IOAddress("0.0.0.0"));
    // Clear client address as it hasn't got any address configured yet.
    req->setCiaddr(IOAddress("0.0.0.0"));

    // Let's clear the broadcast flag.
    req->setFlags(0);

    // Create a response.
    boost::shared_ptr<Pkt4> resp(new Pkt4(DHCPOFFER, 1234));
    // Assign some new address for this client.
    resp->setYiaddr(IOAddress("192.0.2.13"));

    // Clear the remote address.
    resp->setRemoteAddr(IOAddress("0.0.0.0"));

    // When running unit tests, the IfaceMgr is using the default Packet
    // Filtering class, PktFilterInet. This class does not support direct
    // responses to clients without address assigned. When giaddr and ciaddr
    // are zero and client has just got new lease, the assigned address is
    // carried in yiaddr. In order to send this address to the client,
    // server must broadcast its response.
    ASSERT_NO_THROW(srv->adjustRemoteAddr(req, resp));

    // Check that the response is sent to broadcast address as the
    // server doesn't have capability to respond directly.
    EXPECT_EQ("255.255.255.255", resp->getRemoteAddr().toText());

    // We also want to test the case when the server has capability to
    // respond directly to the client which is not configured. Server
    // makes decision whether it responds directly or broadcast its
    // response based on the capability reported by IfaceMgr. In order
    // to set this capability we have to provide a dummy Packet Filter
    // class which would report the support for direct responses.
    // This class is called PktFilterTest.
    IfaceMgr::instance().setPacketFilter(PktFilterPtr(new PktFilterTest()));

    // Now we expect that the server will send its response to the
    // address assigned for the client.
    ASSERT_NO_THROW(srv->adjustRemoteAddr(req, resp));

    EXPECT_EQ("192.0.2.13", resp->getRemoteAddr().toText());
}

737 738 739 740 741
// This test verifies that the destination address of the response message
// is set to broadcast address when client set broadcast flag in its
// query. Client sets this flag to indicate that it can't receive direct
// responses from the server when it doesn't have its interface configured.
// Server must respect broadcast flag.
742 743 744 745 746 747 748 749 750 751 752 753
TEST_F(Dhcpv4SrvTest, adjustRemoteAddressBroadcast) {
    boost::scoped_ptr<NakedDhcpv4Srv> srv(new NakedDhcpv4Srv(0));

    // Create instance of the incoming packet.
    boost::shared_ptr<Pkt4> req(new Pkt4(DHCPDISCOVER, 1234));

    // Clear giaddr to simulate direct packet.
    req->setGiaddr(IOAddress("0.0.0.0"));
    // Clear client address as it hasn't got any address configured yet.
    req->setCiaddr(IOAddress("0.0.0.0"));

    // Let's set the broadcast flag.
754
    req->setFlags(Pkt4::FLAG_BROADCAST_MASK);
755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782

    // Create a response.
    boost::shared_ptr<Pkt4> resp(new Pkt4(DHCPOFFER, 1234));
    // Assign some new address for this client.
    resp->setYiaddr(IOAddress("192.0.2.13"));

    // Clear the remote address.
    resp->setRemoteAddr(IOAddress("0.0.0.0"));

    // When running unit tests, the IfaceMgr is using the default Packet
    // Filtering class, PktFilterInet. This class does not support direct
    // responses to the clients without address assigned. If giaddr and
    // ciaddr are zero and client has just got the new lease, the assigned
    // address is carried in yiaddr. In order to send this address to the
    // client, server must send the response to the broadcast address when
    // direct response is not supported. This conflicts with the purpose
    // of this test which is supposed to verify that responses are sent
    // to broadcast address only, when broadcast flag is set. Therefore,
    // in order to simulate that direct responses are supported we have
    // to replace the default packet filtering class with a dummy class
    // which reports direct response capability.
    IfaceMgr::instance().setPacketFilter(PktFilterPtr(new PktFilterTest()));

    ASSERT_NO_THROW(srv->adjustRemoteAddr(req, resp));

    // Server must repond to broadcast address when client desired that
    // by setting the broadcast flag in its request.
    EXPECT_EQ("255.255.255.255", resp->getRemoteAddr().toText());
783 784
}

785
// Verifies that DISCOVER message can be processed correctly,
Tomek Mrugalski's avatar
Tomek Mrugalski committed
786 787 788 789 790 791 792
// that the OFFER message generated in response is valid and
// contains necessary options.
//
// Note: this test focuses on the packet correctness. There
// are other tests that verify correctness of the allocation
// engine. See DiscoverBasic, DiscoverHint, DiscoverNoClientId
// and DiscoverInvalidHint.
793 794
TEST_F(Dhcpv4SrvTest, processDiscover) {
    testDiscoverRequest(DHCPDISCOVER);
795
}
796

797
// Verifies that REQUEST message can be processed correctly,
798
// that the OFFER message generated in response is valid and
Tomek Mrugalski's avatar
Tomek Mrugalski committed
799 800 801 802
// contains necessary options.
//
// Note: this test focuses on the packet correctness. There
// are other tests that verify correctness of the allocation
803 804
// engine. See DiscoverBasic, DiscoverHint, DiscoverNoClientId
// and DiscoverInvalidHint.
805 806
TEST_F(Dhcpv4SrvTest, processRequest) {
    testDiscoverRequest(DHCPREQUEST);
807 808 809
}

TEST_F(Dhcpv4SrvTest, processRelease) {
810
    NakedDhcpv4Srv srv;
811
    Pkt4Ptr pkt(new Pkt4(DHCPRELEASE, 1234));
812

813
    // Should not throw
814
    EXPECT_NO_THROW(srv.processRelease(pkt));
815 816 817
}

TEST_F(Dhcpv4SrvTest, processDecline) {
818
    NakedDhcpv4Srv srv;
819
    Pkt4Ptr pkt(new Pkt4(DHCPDECLINE, 1234));
820

821
    // Should not throw
822
    EXPECT_NO_THROW(srv.processDecline(pkt));
823 824 825
}

TEST_F(Dhcpv4SrvTest, processInform) {
826
    NakedDhcpv4Srv srv;
827
    Pkt4Ptr pkt(new Pkt4(DHCPINFORM, 1234));
828

829
    // Should not throw
830
    EXPECT_NO_THROW(srv.processInform(pkt));
831

832
    // Should return something
833
    EXPECT_TRUE(srv.processInform(pkt));
834

835
    // @todo Implement more reasonable tests before starting
836
    // work on processSomething() method.
837 838
}

839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870
TEST_F(Dhcpv4SrvTest, serverReceivedPacketName) {
    // Check all possible packet types
    for (int itype = 0; itype < 256; ++itype) {
        uint8_t type = itype;

        switch (type) {
        case DHCPDECLINE:
            EXPECT_STREQ("DECLINE", Dhcpv4Srv::serverReceivedPacketName(type));
            break;

        case DHCPDISCOVER:
            EXPECT_STREQ("DISCOVER", Dhcpv4Srv::serverReceivedPacketName(type));
            break;

        case DHCPINFORM:
            EXPECT_STREQ("INFORM", Dhcpv4Srv::serverReceivedPacketName(type));
            break;

        case DHCPRELEASE:
            EXPECT_STREQ("RELEASE", Dhcpv4Srv::serverReceivedPacketName(type));
            break;

        case DHCPREQUEST:
            EXPECT_STREQ("REQUEST", Dhcpv4Srv::serverReceivedPacketName(type));
            break;

        default:
            EXPECT_STREQ("UNKNOWN", Dhcpv4Srv::serverReceivedPacketName(type));
        }
    }
}

871 872 873 874 875 876 877 878 879 880 881 882 883
// This test verifies that incoming DISCOVER can be handled properly, that an
// OFFER is generated, that the response has an address and that address
// really belongs to the configured pool.
//
// constructed very simple DISCOVER message with:
// - client-id option
//
// expected returned OFFER message:
// - copy of client-id
// - server-id
// - offered address
TEST_F(Dhcpv4SrvTest, DiscoverBasic) {
    boost::scoped_ptr<NakedDhcpv4Srv> srv;
884
    ASSERT_NO_THROW(srv.reset(new NakedDhcpv4Srv(0)));
885 886 887 888 889 890

    Pkt4Ptr dis = Pkt4Ptr(new Pkt4(DHCPDISCOVER, 1234));
    dis->setRemoteAddr(IOAddress("192.0.2.1"));
    OptionPtr clientid = generateClientId();
    dis->addOption(clientid);

891
    // Pass it to the server and get an offer
892 893
    Pkt4Ptr offer = srv->processDiscover(dis);

894
    // Check if we get response at all
895 896
    checkResponse(offer, DHCPOFFER, 1234);

897
    // Check that address was returned from proper range, that its lease
898 899 900
    // lifetime is correct, that T1 and T2 are returned properly
    checkAddressParams(offer, subnet_);

901
    // Check identifiers
902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920
    checkServerId(offer, srv->getServerID());
    checkClientId(offer, clientid);
}


// This test verifies that incoming DISCOVER can be handled properly, that an
// OFFER is generated, that the response has an address and that address
// really belongs to the configured pool.
//
// constructed very simple DISCOVER message with:
// - client-id option
// - address set to specific value as hint
//
// expected returned OFFER message:
// - copy of client-id
// - server-id
// - offered address
TEST_F(Dhcpv4SrvTest, DiscoverHint) {
    boost::scoped_ptr<NakedDhcpv4Srv> srv;
921
    ASSERT_NO_THROW(srv.reset(new NakedDhcpv4Srv(0)));
922 923 924 925 926 927 928 929
    IOAddress hint("192.0.2.107");

    Pkt4Ptr dis = Pkt4Ptr(new Pkt4(DHCPDISCOVER, 1234));
    dis->setRemoteAddr(IOAddress("192.0.2.1"));
    OptionPtr clientid = generateClientId();
    dis->addOption(clientid);
    dis->setYiaddr(hint);

930
    // Pass it to the server and get an offer
931 932
    Pkt4Ptr offer = srv->processDiscover(dis);

933
    // Check if we get response at all
934 935
    checkResponse(offer, DHCPOFFER, 1234);

936
    // Check that address was returned from proper range, that its lease
937 938 939 940 941
    // lifetime is correct, that T1 and T2 are returned properly
    checkAddressParams(offer, subnet_);

    EXPECT_EQ(offer->getYiaddr().toText(), hint.toText());

942
    // Check identifiers
943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960
    checkServerId(offer, srv->getServerID());
    checkClientId(offer, clientid);
}


// This test verifies that incoming DISCOVER can be handled properly, that an
// OFFER is generated, that the response has an address and that address
// really belongs to the configured pool.
//
// constructed very simple DISCOVER message with:
// - address set to specific value as hint
//
// expected returned OFFER message:
// - copy of client-id
// - server-id
// - offered address
TEST_F(Dhcpv4SrvTest, DiscoverNoClientId) {
    boost::scoped_ptr<NakedDhcpv4Srv> srv;
961
    ASSERT_NO_THROW(srv.reset(new NakedDhcpv4Srv(0)));
962 963 964 965 966 967
    IOAddress hint("192.0.2.107");

    Pkt4Ptr dis = Pkt4Ptr(new Pkt4(DHCPDISCOVER, 1234));
    dis->setRemoteAddr(IOAddress("192.0.2.1"));
    dis->setYiaddr(hint);

968
    // Pass it to the server and get an offer
969 970
    Pkt4Ptr offer = srv->processDiscover(dis);

971
    // Check if we get response at all
972 973
    checkResponse(offer, DHCPOFFER, 1234);

974
    // Check that address was returned from proper range, that its lease
975 976 977 978 979
    // lifetime is correct, that T1 and T2 are returned properly
    checkAddressParams(offer, subnet_);

    EXPECT_EQ(offer->getYiaddr().toText(), hint.toText());

980
    // Check identifiers
981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997
    checkServerId(offer, srv->getServerID());
}

// This test verifies that incoming DISCOVER can be handled properly, that an
// OFFER is generated, that the response has an address and that address
// really belongs to the configured pool.
//
// constructed very simple DISCOVER message with:
// - client-id option
// - address set to specific value as hint, but that hint is invalid
//
// expected returned OFFER message:
// - copy of client-id
// - server-id
// - offered address (!= hint)
TEST_F(Dhcpv4SrvTest, DiscoverInvalidHint) {
    boost::scoped_ptr<NakedDhcpv4Srv> srv;
998
    ASSERT_NO_THROW(srv.reset(new NakedDhcpv4Srv(0)));
999 1000 1001 1002 1003 1004 1005 1006
    IOAddress hint("10.1.2.3");

    Pkt4Ptr dis = Pkt4Ptr(new Pkt4(DHCPDISCOVER, 1234));
    dis->setRemoteAddr(IOAddress("192.0.2.107"));
    OptionPtr clientid = generateClientId();
    dis->addOption(clientid);
    dis->setYiaddr(hint);

1007
    // Pass it to the server and get an offer
1008 1009
    Pkt4Ptr offer = srv->processDiscover(dis);

1010
    // Check if we get response at all
1011 1012
    checkResponse(offer, DHCPOFFER, 1234);

1013
    // Check that address was returned from proper range, that its lease
1014 1015 1016 1017 1018
    // lifetime is correct, that T1 and T2 are returned properly
    checkAddressParams(offer, subnet_);

    EXPECT_NE(offer->getYiaddr().toText(), hint.toText());

1019
    // Check identifiers
1020 1021 1022 1023 1024 1025 1026 1027
    checkServerId(offer, srv->getServerID());
    checkClientId(offer, clientid);
}

/// @todo: Add a test that client sends hint that is in pool, but currently
/// being used by a different client.

// This test checks that the server is offering different addresses to different
Tomek Mrugalski's avatar
Tomek Mrugalski committed
1028 1029
// clients in OFFERs. Please note that OFFER is not a guarantee that such
// an address will be assigned. Had the pool was very small and contained only
1030
// 2 addresses, the third client would get the same offer as the first one
1031
// and this is a correct behavior. It is REQUEST that will fail for the third
Tomek Mrugalski's avatar
Tomek Mrugalski committed
1032
// client. OFFER is basically saying "if you send me a request, you will
1033 1034 1035
// probably get an address like this" (there are no guarantees).
TEST_F(Dhcpv4SrvTest, ManyDiscovers) {
    boost::scoped_ptr<NakedDhcpv4Srv> srv;
1036
    ASSERT_NO_THROW(srv.reset(new NakedDhcpv4Srv(0)));
1037 1038 1039 1040 1041 1042 1043 1044 1045

    Pkt4Ptr dis1 = Pkt4Ptr(new Pkt4(DHCPDISCOVER, 1234));
    Pkt4Ptr dis2 = Pkt4Ptr(new Pkt4(DHCPDISCOVER, 2345));
    Pkt4Ptr dis3 = Pkt4Ptr(new Pkt4(DHCPDISCOVER, 3456));

    dis1->setRemoteAddr(IOAddress("192.0.2.1"));
    dis2->setRemoteAddr(IOAddress("192.0.2.2"));
    dis3->setRemoteAddr(IOAddress("192.0.2.3"));

1046
    // Different client-id sizes
1047 1048 1049 1050 1051 1052 1053 1054
    OptionPtr clientid1 = generateClientId(4); // length 4
    OptionPtr clientid2 = generateClientId(5); // length 5
    OptionPtr clientid3 = generateClientId(6); // length 6

    dis1->addOption(clientid1);
    dis2->addOption(clientid2);
    dis3->addOption(clientid3);

1055 1056 1057 1058
    // Pass it to the server and get an offer
    Pkt4Ptr offer1 = srv->processDiscover(dis1);
    Pkt4Ptr offer2 = srv->processDiscover(dis2);
    Pkt4Ptr offer3 = srv->processDiscover(dis3);
1059

1060 1061 1062 1063
    // Check if we get response at all
    checkResponse(offer1, DHCPOFFER, 1234);
    checkResponse(offer2, DHCPOFFER, 2345);
    checkResponse(offer3, DHCPOFFER, 3456);
1064

1065 1066 1067
    IOAddress addr1 = offer1->getYiaddr();
    IOAddress addr2 = offer2->getYiaddr();
    IOAddress addr3 = offer3->getYiaddr();
1068 1069

    // Check that the assigned address is indeed from the configured pool
1070 1071 1072 1073
    checkAddressParams(offer1, subnet_);
    checkAddressParams(offer2, subnet_);
    checkAddressParams(offer3, subnet_);

1074
    // Check server-ids
1075 1076 1077 1078 1079 1080
    checkServerId(offer1, srv->getServerID());
    checkServerId(offer2, srv->getServerID());
    checkServerId(offer3, srv->getServerID());
    checkClientId(offer1, clientid1);
    checkClientId(offer2, clientid2);
    checkClientId(offer3, clientid3);
1081 1082 1083 1084 1085 1086 1087 1088 1089 1090

    // Finally check that the addresses offered are different
    EXPECT_NE(addr1.toText(), addr2.toText());
    EXPECT_NE(addr2.toText(), addr3.toText());
    EXPECT_NE(addr3.toText(), addr1.toText());
    cout << "Offered address to client1=" << addr1.toText() << endl;
    cout << "Offered address to client2=" << addr2.toText() << endl;
    cout << "Offered address to client3=" << addr3.toText() << endl;
}

Tomek Mrugalski's avatar
Tomek Mrugalski committed
1091 1092
// This test verifies that incoming REQUEST can be handled properly, that an
// ACK is generated, that the response has an address and that address
1093 1094
// really belongs to the configured pool.
//
Tomek Mrugalski's avatar
Tomek Mrugalski committed
1095
// constructed a single REQUEST message with:
1096
// - client-id option
Tomek Mrugalski's avatar
Tomek Mrugalski committed
1097 1098
// - hwaddr information
// - requested address (that the client received in DISCOVER/OFFER exchange)
1099
//
Tomek Mrugalski's avatar
Tomek Mrugalski committed
1100
// expected returned ACK message:
1101 1102
// - copy of client-id
// - server-id
Tomek Mrugalski's avatar
Tomek Mrugalski committed
1103 1104 1105
// - assigned address
//
// Test verifies that the lease is actually in the database.
1106 1107
TEST_F(Dhcpv4SrvTest, RequestBasic) {
    boost::scoped_ptr<NakedDhcpv4Srv> srv;
1108
    ASSERT_NO_THROW(srv.reset(new NakedDhcpv4Srv(0)));