dhcp4_srv_unittest.cc 99.3 KB
Newer Older
Tomek Mrugalski's avatar
Tomek Mrugalski committed
1
// Copyright (C) 2011-2013  Internet Systems Consortium, Inc. ("ISC")
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
//
// Permission to use, copy, modify, and/or distribute this software for any
// purpose with or without fee is hereby granted, provided that the above
// copyright notice and this permission notice appear in all copies.
//
// THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
// REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
// AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
// INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
// LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
// OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
// PERFORMANCE OF THIS SOFTWARE.

#include <config.h>
#include <sstream>

18
#include <asiolink/io_address.h>
19
#include <config/ccsession.h>
20
#include <dhcp4/tests/dhcp4_test_utils.h>
21
#include <dhcp/dhcp4.h>
22
#include <dhcp/iface_mgr.h>
23
#include <dhcp/option.h>
24
#include <dhcp/option_int.h>
25
#include <dhcp/option4_addrlst.h>
26
#include <dhcp/option_custom.h>
27
#include <dhcp/option_int_array.h>
28
#include <dhcp/option_vendor.h>
29 30
#include <dhcp/pkt_filter.h>
#include <dhcp/pkt_filter_inet.h>
31
#include <dhcp/docsis3_option_defs.h>
32
#include <dhcp4/dhcp4_srv.h>
Tomek Mrugalski's avatar
Tomek Mrugalski committed
33
#include <dhcp4/dhcp4_log.h>
34
#include <dhcp4/config_parser.h>
35
#include <hooks/server_hooks.h>
36 37 38 39
#include <dhcpsrv/cfgmgr.h>
#include <dhcpsrv/lease_mgr.h>
#include <dhcpsrv/lease_mgr_factory.h>
#include <dhcpsrv/utils.h>
40
#include <gtest/gtest.h>
41 42
#include <hooks/server_hooks.h>
#include <hooks/hooks_manager.h>
43

44 45
#include <boost/scoped_ptr.hpp>

46 47 48 49
#include <fstream>
#include <iostream>

#include <arpa/inet.h>
50 51 52 53

using namespace std;
using namespace isc;
using namespace isc::dhcp;
54
using namespace isc::data;
55
using namespace isc::asiolink;
56
using namespace isc::hooks;
57

58
#if 0
59 60 61
namespace {

class NakedDhcpv4Srv: public Dhcpv4Srv {
62
    // "Naked" DHCPv4 server, exposes internal fields
63
public:
64 65 66

    /// @brief Constructor.
    ///
67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86
    /// This constructor disables default modes of operation used by the
    /// Dhcpv4Srv class:
    /// - Send/receive broadcast messages through sockets on interfaces
    /// which support broadcast traffic.
    /// - Direct DHCPv4 traffic - communication with clients which do not
    /// have IP address assigned yet.
    ///
    /// Enabling these modes requires root privilges so they must be
    /// disabled for unit testing.
    ///
    /// Note, that disabling broadcast options on sockets does not impact
    /// the operation of these tests because they use local loopback
    /// interface which doesn't have broadcast capability anyway. It rather
    /// prevents setting broadcast options on other (broadcast capable)
    /// sockets which are opened on other interfaces in Dhcpv4Srv constructor.
    ///
    /// The Direct DHCPv4 Traffic capability can be disabled here because
    /// it is tested with PktFilterLPFTest unittest. The tests which belong
    /// to PktFilterLPFTest can be enabled on demand when root privileges can
    /// be guaranteed.
87 88 89
    ///
    /// @param port port number to listen on; the default value 0 indicates
    /// that sockets should not be opened.
90
    NakedDhcpv4Srv(uint16_t port = 0)
91
        : Dhcpv4Srv(port, "type=memfile", false, false) {
92
    }
93

94 95 96
    /// @brief fakes packet reception
    /// @param timeout ignored
    ///
Tomek Mrugalski's avatar
Tomek Mrugalski committed
97 98
    /// The method receives all packets queued in receive queue, one after
    /// another. Once the queue is empty, it initiates the shutdown procedure.
99 100 101 102
    ///
    /// See fake_received_ field for description
    virtual Pkt4Ptr receivePacket(int /*timeout*/) {

Tomek Mrugalski's avatar
Tomek Mrugalski committed
103
        // If there is anything prepared as fake incoming traffic, use it
104 105 106 107 108 109
        if (!fake_received_.empty()) {
            Pkt4Ptr pkt = fake_received_.front();
            fake_received_.pop_front();
            return (pkt);
        }

Tomek Mrugalski's avatar
Tomek Mrugalski committed
110
        // If not, just trigger shutdown and return immediately
111 112 113 114 115 116
        shutdown();
        return (Pkt4Ptr());
    }

    /// @brief fake packet sending
    ///
Tomek Mrugalski's avatar
Tomek Mrugalski committed
117 118
    /// Pretend to send a packet, but instead just store it in fake_send_ list
    /// where test can later inspect server's response.
119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142
    virtual void sendPacket(const Pkt4Ptr& pkt) {
        fake_sent_.push_back(pkt);
    }

    /// @brief adds a packet to fake receive queue
    ///
    /// See fake_received_ field for description
    void fakeReceive(const Pkt4Ptr& pkt) {
        fake_received_.push_back(pkt);
    }

    virtual ~NakedDhcpv4Srv() {
    }

    /// @brief packets we pretend to receive
    ///
    /// Instead of setting up sockets on interfaces that change between OSes, it
    /// is much easier to fake packet reception. This is a list of packets that
    /// we pretend to have received. You can schedule new packets to be received
    /// using fakeReceive() and NakedDhcpv4Srv::receivePacket() methods.
    list<Pkt4Ptr> fake_received_;

    list<Pkt4Ptr> fake_sent_;

143
    using Dhcpv4Srv::adjustRemoteAddr;
144 145 146 147 148 149
    using Dhcpv4Srv::processDiscover;
    using Dhcpv4Srv::processRequest;
    using Dhcpv4Srv::processRelease;
    using Dhcpv4Srv::processDecline;
    using Dhcpv4Srv::processInform;
    using Dhcpv4Srv::getServerID;
150 151 152
    using Dhcpv4Srv::loadServerID;
    using Dhcpv4Srv::generateServerID;
    using Dhcpv4Srv::writeServerID;
153
    using Dhcpv4Srv::sanityCheck;
154
    using Dhcpv4Srv::srvidToString;
155
    using Dhcpv4Srv::unpackOptions;
156
};
157
#endif
158

159
/// dummy server-id file location
160 161
static const char* SRVID_FILE = "server-id-test.txt";

162 163 164
namespace isc {
namespace dhcp {
namespace test {
165

Tomek Mrugalski's avatar
Tomek Mrugalski committed
166 167
// Sanity check. Verifies that both Dhcpv4Srv and its derived
// class NakedDhcpv4Srv can be instantiated and destroyed.
168 169
TEST_F(Dhcpv4SrvTest, basic) {

170
    // Check that the base class can be instantiated
171
    boost::scoped_ptr<Dhcpv4Srv> srv;
172 173
    ASSERT_NO_THROW(srv.reset(new Dhcpv4Srv(DHCP4_SERVER_PORT + 10000, "type=memfile",
                                            false, false)));
174
    srv.reset();
175 176 177 178 179
    // We have to close open sockets because further in this test we will
    // call the Dhcpv4Srv constructor again. This constructor will try to
    // set the appropriate packet filter class for IfaceMgr. This requires
    // that all sockets are closed.
    IfaceMgr::instance().closeSockets();
180

181
    // Check that the derived class can be instantiated
182 183
    boost::scoped_ptr<NakedDhcpv4Srv> naked_srv;
    ASSERT_NO_THROW(
184
        naked_srv.reset(new NakedDhcpv4Srv(DHCP4_SERVER_PORT + 10000)));
185
    EXPECT_TRUE(naked_srv->getServerID());
186 187
    // Close sockets again for the next test.
    IfaceMgr::instance().closeSockets();
188

189
    ASSERT_NO_THROW(naked_srv.reset(new NakedDhcpv4Srv(0)));
190
    EXPECT_TRUE(naked_srv->getServerID());
191 192
}

193 194 195
// This test verifies that the destination address of the response
// message is set to giaddr, when giaddr is set to non-zero address
// in the received message.
196 197 198
TEST_F(Dhcpv4SrvTest, adjustRemoteAddressRelay) {
    boost::scoped_ptr<NakedDhcpv4Srv> srv(new NakedDhcpv4Srv(0));

199
    // Create the instance of the incoming packet.
200
    boost::shared_ptr<Pkt4> req(new Pkt4(DHCPDISCOVER, 1234));
201
    // Set the giaddr to non-zero address as if it was relayed.
202
    req->setGiaddr(IOAddress("192.0.2.1"));
203 204
    // Set ciaddr to zero. This simulates the client which applies
    // for the new lease.
205
    req->setCiaddr(IOAddress("0.0.0.0"));
206 207 208 209 210 211 212
    // Clear broadcast flag.
    req->setFlags(0x0000);

    // Create a response packet. Assume that the new lease have
    // been created and new address allocated. This address is
    // stored in yiaddr field.
    boost::shared_ptr<Pkt4> resp(new Pkt4(DHCPOFFER, 1234));
213
    resp->setYiaddr(IOAddress("192.0.2.100"));
214 215
    // Clear the remote address.
    resp->setRemoteAddr(IOAddress("0.0.0.0"));
216

217
    // This function never throws.
218 219
    ASSERT_NO_THROW(srv->adjustRemoteAddr(req, resp));

220
    // Now the destination address should be relay's address.
221
    EXPECT_EQ("192.0.2.1", resp->getRemoteAddr().toText());
222 223 224 225 226 227

    // Let's do another test and set other fields: ciaddr and
    // flags. By doing it, we want to make sure that the relay
    // address will take precedence.
    req->setGiaddr(IOAddress("192.0.2.50"));
    req->setCiaddr(IOAddress("192.0.2.11"));
228
    req->setFlags(Pkt4::FLAG_BROADCAST_MASK);
229 230 231 232 233 234 235 236 237 238 239

    resp->setYiaddr(IOAddress("192.0.2.100"));
    // Clear remote address.
    resp->setRemoteAddr(IOAddress("0.0.0.0"));

    ASSERT_NO_THROW(srv->adjustRemoteAddr(req, resp));

    // Response should be sent back to the relay address.
    EXPECT_EQ("192.0.2.50", resp->getRemoteAddr().toText());
}

240 241 242 243
// This test verifies that the destination address of the response message
// is set to ciaddr when giaddr is set to zero and the ciaddr is set to
// non-zero address in the received message. This is the case when the
// client is in Renew or Rebind state.
244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261
TEST_F(Dhcpv4SrvTest, adjustRemoteAddressRenewRebind) {
    boost::scoped_ptr<NakedDhcpv4Srv> srv(new NakedDhcpv4Srv(0));

    // Create instance of the incoming packet.
    boost::shared_ptr<Pkt4> req(new Pkt4(DHCPDISCOVER, 1234));

    // Clear giaddr to simulate direct packet.
    req->setGiaddr(IOAddress("0.0.0.0"));
    // Set ciaddr to non-zero address. The response should be sent to this
    // address as the client is in renewing or rebinding state (it is fully
    // configured).
    req->setCiaddr(IOAddress("192.0.2.15"));
    // Let's configure broadcast flag. It should be ignored because
    // we are responding directly to the client having an address
    // and trying to extend his lease. Broadcast flag is only used
    // when new lease is acquired and server must make a decision
    // whether to unicast the response to the acquired address or
    // broadcast it.
262
    req->setFlags(Pkt4::FLAG_BROADCAST_MASK);
263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279

    // Create a response.
    boost::shared_ptr<Pkt4> resp(new Pkt4(DHCPOFFER, 1234));
    // Let's extend the lease for the client in such a way that
    // it will actually get different address. The response
    // should not be sent to this address but rather to ciaddr
    // as client still have ciaddr configured.
    resp->setYiaddr(IOAddress("192.0.2.13"));
    // Clear the remote address.
    resp->setRemoteAddr(IOAddress("0.0.0.0"));

    ASSERT_NO_THROW(srv->adjustRemoteAddr(req, resp));

    // Check that server responds to ciaddr
    EXPECT_EQ("192.0.2.15", resp->getRemoteAddr().toText());
}

280 281 282 283 284 285 286
// This test verifies that the destination address of the response message
// is set correctly when giaddr and ciaddr is zeroed in the received message
// and the new lease is acquired. The lease address is carried in the
// response message in the yiaddr field. In this case destination address
// of the response should be set to yiaddr if server supports direct responses
// to the client which doesn't have an address yet or broadcast if the server
// doesn't support direct responses.
287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336
TEST_F(Dhcpv4SrvTest, adjustRemoteAddressSelect) {
    boost::scoped_ptr<NakedDhcpv4Srv> srv(new NakedDhcpv4Srv(0));

    // Create instance of the incoming packet.
    boost::shared_ptr<Pkt4> req(new Pkt4(DHCPDISCOVER, 1234));

    // Clear giaddr to simulate direct packet.
    req->setGiaddr(IOAddress("0.0.0.0"));
    // Clear client address as it hasn't got any address configured yet.
    req->setCiaddr(IOAddress("0.0.0.0"));

    // Let's clear the broadcast flag.
    req->setFlags(0);

    // Create a response.
    boost::shared_ptr<Pkt4> resp(new Pkt4(DHCPOFFER, 1234));
    // Assign some new address for this client.
    resp->setYiaddr(IOAddress("192.0.2.13"));

    // Clear the remote address.
    resp->setRemoteAddr(IOAddress("0.0.0.0"));

    // When running unit tests, the IfaceMgr is using the default Packet
    // Filtering class, PktFilterInet. This class does not support direct
    // responses to clients without address assigned. When giaddr and ciaddr
    // are zero and client has just got new lease, the assigned address is
    // carried in yiaddr. In order to send this address to the client,
    // server must broadcast its response.
    ASSERT_NO_THROW(srv->adjustRemoteAddr(req, resp));

    // Check that the response is sent to broadcast address as the
    // server doesn't have capability to respond directly.
    EXPECT_EQ("255.255.255.255", resp->getRemoteAddr().toText());

    // We also want to test the case when the server has capability to
    // respond directly to the client which is not configured. Server
    // makes decision whether it responds directly or broadcast its
    // response based on the capability reported by IfaceMgr. In order
    // to set this capability we have to provide a dummy Packet Filter
    // class which would report the support for direct responses.
    // This class is called PktFilterTest.
    IfaceMgr::instance().setPacketFilter(PktFilterPtr(new PktFilterTest()));

    // Now we expect that the server will send its response to the
    // address assigned for the client.
    ASSERT_NO_THROW(srv->adjustRemoteAddr(req, resp));

    EXPECT_EQ("192.0.2.13", resp->getRemoteAddr().toText());
}

337 338 339 340 341
// This test verifies that the destination address of the response message
// is set to broadcast address when client set broadcast flag in its
// query. Client sets this flag to indicate that it can't receive direct
// responses from the server when it doesn't have its interface configured.
// Server must respect broadcast flag.
342 343 344 345 346 347 348 349 350 351 352 353
TEST_F(Dhcpv4SrvTest, adjustRemoteAddressBroadcast) {
    boost::scoped_ptr<NakedDhcpv4Srv> srv(new NakedDhcpv4Srv(0));

    // Create instance of the incoming packet.
    boost::shared_ptr<Pkt4> req(new Pkt4(DHCPDISCOVER, 1234));

    // Clear giaddr to simulate direct packet.
    req->setGiaddr(IOAddress("0.0.0.0"));
    // Clear client address as it hasn't got any address configured yet.
    req->setCiaddr(IOAddress("0.0.0.0"));

    // Let's set the broadcast flag.
354
    req->setFlags(Pkt4::FLAG_BROADCAST_MASK);
355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382

    // Create a response.
    boost::shared_ptr<Pkt4> resp(new Pkt4(DHCPOFFER, 1234));
    // Assign some new address for this client.
    resp->setYiaddr(IOAddress("192.0.2.13"));

    // Clear the remote address.
    resp->setRemoteAddr(IOAddress("0.0.0.0"));

    // When running unit tests, the IfaceMgr is using the default Packet
    // Filtering class, PktFilterInet. This class does not support direct
    // responses to the clients without address assigned. If giaddr and
    // ciaddr are zero and client has just got the new lease, the assigned
    // address is carried in yiaddr. In order to send this address to the
    // client, server must send the response to the broadcast address when
    // direct response is not supported. This conflicts with the purpose
    // of this test which is supposed to verify that responses are sent
    // to broadcast address only, when broadcast flag is set. Therefore,
    // in order to simulate that direct responses are supported we have
    // to replace the default packet filtering class with a dummy class
    // which reports direct response capability.
    IfaceMgr::instance().setPacketFilter(PktFilterPtr(new PktFilterTest()));

    ASSERT_NO_THROW(srv->adjustRemoteAddr(req, resp));

    // Server must repond to broadcast address when client desired that
    // by setting the broadcast flag in its request.
    EXPECT_EQ("255.255.255.255", resp->getRemoteAddr().toText());
383 384
}

385
// Verifies that DISCOVER message can be processed correctly,
Tomek Mrugalski's avatar
Tomek Mrugalski committed
386 387 388 389 390 391 392
// that the OFFER message generated in response is valid and
// contains necessary options.
//
// Note: this test focuses on the packet correctness. There
// are other tests that verify correctness of the allocation
// engine. See DiscoverBasic, DiscoverHint, DiscoverNoClientId
// and DiscoverInvalidHint.
393 394
TEST_F(Dhcpv4SrvTest, processDiscover) {
    testDiscoverRequest(DHCPDISCOVER);
395
}
396

397
// Verifies that REQUEST message can be processed correctly,
398
// that the OFFER message generated in response is valid and
Tomek Mrugalski's avatar
Tomek Mrugalski committed
399 400 401 402
// contains necessary options.
//
// Note: this test focuses on the packet correctness. There
// are other tests that verify correctness of the allocation
403 404
// engine. See DiscoverBasic, DiscoverHint, DiscoverNoClientId
// and DiscoverInvalidHint.
405 406
TEST_F(Dhcpv4SrvTest, processRequest) {
    testDiscoverRequest(DHCPREQUEST);
407 408 409
}

TEST_F(Dhcpv4SrvTest, processRelease) {
410
    NakedDhcpv4Srv srv;
411
    Pkt4Ptr pkt(new Pkt4(DHCPRELEASE, 1234));
412

413
    // Should not throw
414
    EXPECT_NO_THROW(srv.processRelease(pkt));
415 416 417
}

TEST_F(Dhcpv4SrvTest, processDecline) {
418
    NakedDhcpv4Srv srv;
419
    Pkt4Ptr pkt(new Pkt4(DHCPDECLINE, 1234));
420

421
    // Should not throw
422
    EXPECT_NO_THROW(srv.processDecline(pkt));
423 424 425
}

TEST_F(Dhcpv4SrvTest, processInform) {
426
    NakedDhcpv4Srv srv;
427
    Pkt4Ptr pkt(new Pkt4(DHCPINFORM, 1234));
428

429
    // Should not throw
430
    EXPECT_NO_THROW(srv.processInform(pkt));
431

432
    // Should return something
433
    EXPECT_TRUE(srv.processInform(pkt));
434

435
    // @todo Implement more reasonable tests before starting
436
    // work on processSomething() method.
437 438
}

439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470
TEST_F(Dhcpv4SrvTest, serverReceivedPacketName) {
    // Check all possible packet types
    for (int itype = 0; itype < 256; ++itype) {
        uint8_t type = itype;

        switch (type) {
        case DHCPDECLINE:
            EXPECT_STREQ("DECLINE", Dhcpv4Srv::serverReceivedPacketName(type));
            break;

        case DHCPDISCOVER:
            EXPECT_STREQ("DISCOVER", Dhcpv4Srv::serverReceivedPacketName(type));
            break;

        case DHCPINFORM:
            EXPECT_STREQ("INFORM", Dhcpv4Srv::serverReceivedPacketName(type));
            break;

        case DHCPRELEASE:
            EXPECT_STREQ("RELEASE", Dhcpv4Srv::serverReceivedPacketName(type));
            break;

        case DHCPREQUEST:
            EXPECT_STREQ("REQUEST", Dhcpv4Srv::serverReceivedPacketName(type));
            break;

        default:
            EXPECT_STREQ("UNKNOWN", Dhcpv4Srv::serverReceivedPacketName(type));
        }
    }
}

471 472 473 474 475 476 477 478 479 480 481 482 483
// This test verifies that incoming DISCOVER can be handled properly, that an
// OFFER is generated, that the response has an address and that address
// really belongs to the configured pool.
//
// constructed very simple DISCOVER message with:
// - client-id option
//
// expected returned OFFER message:
// - copy of client-id
// - server-id
// - offered address
TEST_F(Dhcpv4SrvTest, DiscoverBasic) {
    boost::scoped_ptr<NakedDhcpv4Srv> srv;
484
    ASSERT_NO_THROW(srv.reset(new NakedDhcpv4Srv(0)));
485 486 487 488 489 490

    Pkt4Ptr dis = Pkt4Ptr(new Pkt4(DHCPDISCOVER, 1234));
    dis->setRemoteAddr(IOAddress("192.0.2.1"));
    OptionPtr clientid = generateClientId();
    dis->addOption(clientid);

491
    // Pass it to the server and get an offer
492 493
    Pkt4Ptr offer = srv->processDiscover(dis);

494
    // Check if we get response at all
495 496
    checkResponse(offer, DHCPOFFER, 1234);

497
    // Check that address was returned from proper range, that its lease
498 499 500
    // lifetime is correct, that T1 and T2 are returned properly
    checkAddressParams(offer, subnet_);

501
    // Check identifiers
502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520
    checkServerId(offer, srv->getServerID());
    checkClientId(offer, clientid);
}


// This test verifies that incoming DISCOVER can be handled properly, that an
// OFFER is generated, that the response has an address and that address
// really belongs to the configured pool.
//
// constructed very simple DISCOVER message with:
// - client-id option
// - address set to specific value as hint
//
// expected returned OFFER message:
// - copy of client-id
// - server-id
// - offered address
TEST_F(Dhcpv4SrvTest, DiscoverHint) {
    boost::scoped_ptr<NakedDhcpv4Srv> srv;
521
    ASSERT_NO_THROW(srv.reset(new NakedDhcpv4Srv(0)));
522 523 524 525 526 527 528 529
    IOAddress hint("192.0.2.107");

    Pkt4Ptr dis = Pkt4Ptr(new Pkt4(DHCPDISCOVER, 1234));
    dis->setRemoteAddr(IOAddress("192.0.2.1"));
    OptionPtr clientid = generateClientId();
    dis->addOption(clientid);
    dis->setYiaddr(hint);

530
    // Pass it to the server and get an offer
531 532
    Pkt4Ptr offer = srv->processDiscover(dis);

533
    // Check if we get response at all
534 535
    checkResponse(offer, DHCPOFFER, 1234);

536
    // Check that address was returned from proper range, that its lease
537 538 539 540 541
    // lifetime is correct, that T1 and T2 are returned properly
    checkAddressParams(offer, subnet_);

    EXPECT_EQ(offer->getYiaddr().toText(), hint.toText());

542
    // Check identifiers
543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560
    checkServerId(offer, srv->getServerID());
    checkClientId(offer, clientid);
}


// This test verifies that incoming DISCOVER can be handled properly, that an
// OFFER is generated, that the response has an address and that address
// really belongs to the configured pool.
//
// constructed very simple DISCOVER message with:
// - address set to specific value as hint
//
// expected returned OFFER message:
// - copy of client-id
// - server-id
// - offered address
TEST_F(Dhcpv4SrvTest, DiscoverNoClientId) {
    boost::scoped_ptr<NakedDhcpv4Srv> srv;
561
    ASSERT_NO_THROW(srv.reset(new NakedDhcpv4Srv(0)));
562 563 564 565 566
    IOAddress hint("192.0.2.107");

    Pkt4Ptr dis = Pkt4Ptr(new Pkt4(DHCPDISCOVER, 1234));
    dis->setRemoteAddr(IOAddress("192.0.2.1"));
    dis->setYiaddr(hint);
567
    dis->setHWAddr(generateHWAddr(6));
568

569
    // Pass it to the server and get an offer
570 571
    Pkt4Ptr offer = srv->processDiscover(dis);

572
    // Check if we get response at all
573 574
    checkResponse(offer, DHCPOFFER, 1234);

575
    // Check that address was returned from proper range, that its lease
576 577 578 579 580
    // lifetime is correct, that T1 and T2 are returned properly
    checkAddressParams(offer, subnet_);

    EXPECT_EQ(offer->getYiaddr().toText(), hint.toText());

581
    // Check identifiers
582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598
    checkServerId(offer, srv->getServerID());
}

// This test verifies that incoming DISCOVER can be handled properly, that an
// OFFER is generated, that the response has an address and that address
// really belongs to the configured pool.
//
// constructed very simple DISCOVER message with:
// - client-id option
// - address set to specific value as hint, but that hint is invalid
//
// expected returned OFFER message:
// - copy of client-id
// - server-id
// - offered address (!= hint)
TEST_F(Dhcpv4SrvTest, DiscoverInvalidHint) {
    boost::scoped_ptr<NakedDhcpv4Srv> srv;
599
    ASSERT_NO_THROW(srv.reset(new NakedDhcpv4Srv(0)));
600 601 602 603 604 605 606 607
    IOAddress hint("10.1.2.3");

    Pkt4Ptr dis = Pkt4Ptr(new Pkt4(DHCPDISCOVER, 1234));
    dis->setRemoteAddr(IOAddress("192.0.2.107"));
    OptionPtr clientid = generateClientId();
    dis->addOption(clientid);
    dis->setYiaddr(hint);

608
    // Pass it to the server and get an offer
609 610
    Pkt4Ptr offer = srv->processDiscover(dis);

611
    // Check if we get response at all
612 613
    checkResponse(offer, DHCPOFFER, 1234);

614
    // Check that address was returned from proper range, that its lease
615 616 617 618 619
    // lifetime is correct, that T1 and T2 are returned properly
    checkAddressParams(offer, subnet_);

    EXPECT_NE(offer->getYiaddr().toText(), hint.toText());

620
    // Check identifiers
621 622 623 624 625 626 627 628
    checkServerId(offer, srv->getServerID());
    checkClientId(offer, clientid);
}

/// @todo: Add a test that client sends hint that is in pool, but currently
/// being used by a different client.

// This test checks that the server is offering different addresses to different
Tomek Mrugalski's avatar
Tomek Mrugalski committed
629 630
// clients in OFFERs. Please note that OFFER is not a guarantee that such
// an address will be assigned. Had the pool was very small and contained only
631
// 2 addresses, the third client would get the same offer as the first one
632
// and this is a correct behavior. It is REQUEST that will fail for the third
Tomek Mrugalski's avatar
Tomek Mrugalski committed
633
// client. OFFER is basically saying "if you send me a request, you will
634 635 636
// probably get an address like this" (there are no guarantees).
TEST_F(Dhcpv4SrvTest, ManyDiscovers) {
    boost::scoped_ptr<NakedDhcpv4Srv> srv;
637
    ASSERT_NO_THROW(srv.reset(new NakedDhcpv4Srv(0)));
638 639 640 641 642 643 644 645 646

    Pkt4Ptr dis1 = Pkt4Ptr(new Pkt4(DHCPDISCOVER, 1234));
    Pkt4Ptr dis2 = Pkt4Ptr(new Pkt4(DHCPDISCOVER, 2345));
    Pkt4Ptr dis3 = Pkt4Ptr(new Pkt4(DHCPDISCOVER, 3456));

    dis1->setRemoteAddr(IOAddress("192.0.2.1"));
    dis2->setRemoteAddr(IOAddress("192.0.2.2"));
    dis3->setRemoteAddr(IOAddress("192.0.2.3"));

647
    // Different client-id sizes
648 649 650 651 652 653 654 655
    OptionPtr clientid1 = generateClientId(4); // length 4
    OptionPtr clientid2 = generateClientId(5); // length 5
    OptionPtr clientid3 = generateClientId(6); // length 6

    dis1->addOption(clientid1);
    dis2->addOption(clientid2);
    dis3->addOption(clientid3);

656 657 658 659
    // Pass it to the server and get an offer
    Pkt4Ptr offer1 = srv->processDiscover(dis1);
    Pkt4Ptr offer2 = srv->processDiscover(dis2);
    Pkt4Ptr offer3 = srv->processDiscover(dis3);
660

661 662 663 664
    // Check if we get response at all
    checkResponse(offer1, DHCPOFFER, 1234);
    checkResponse(offer2, DHCPOFFER, 2345);
    checkResponse(offer3, DHCPOFFER, 3456);
665

666 667 668
    IOAddress addr1 = offer1->getYiaddr();
    IOAddress addr2 = offer2->getYiaddr();
    IOAddress addr3 = offer3->getYiaddr();
669 670

    // Check that the assigned address is indeed from the configured pool
671 672 673 674
    checkAddressParams(offer1, subnet_);
    checkAddressParams(offer2, subnet_);
    checkAddressParams(offer3, subnet_);

675
    // Check server-ids
676 677 678 679 680 681
    checkServerId(offer1, srv->getServerID());
    checkServerId(offer2, srv->getServerID());
    checkServerId(offer3, srv->getServerID());
    checkClientId(offer1, clientid1);
    checkClientId(offer2, clientid2);
    checkClientId(offer3, clientid3);
682 683 684 685 686 687 688 689 690 691

    // Finally check that the addresses offered are different
    EXPECT_NE(addr1.toText(), addr2.toText());
    EXPECT_NE(addr2.toText(), addr3.toText());
    EXPECT_NE(addr3.toText(), addr1.toText());
    cout << "Offered address to client1=" << addr1.toText() << endl;
    cout << "Offered address to client2=" << addr2.toText() << endl;
    cout << "Offered address to client3=" << addr3.toText() << endl;
}

Tomek Mrugalski's avatar
Tomek Mrugalski committed
692 693
// This test verifies that incoming REQUEST can be handled properly, that an
// ACK is generated, that the response has an address and that address
694 695
// really belongs to the configured pool.
//
Tomek Mrugalski's avatar
Tomek Mrugalski committed
696
// constructed a single REQUEST message with:
697
// - client-id option
Tomek Mrugalski's avatar
Tomek Mrugalski committed
698 699
// - hwaddr information
// - requested address (that the client received in DISCOVER/OFFER exchange)
700
//
Tomek Mrugalski's avatar
Tomek Mrugalski committed
701
// expected returned ACK message:
702 703
// - copy of client-id
// - server-id
Tomek Mrugalski's avatar
Tomek Mrugalski committed
704 705 706
// - assigned address
//
// Test verifies that the lease is actually in the database.
707 708
TEST_F(Dhcpv4SrvTest, RequestBasic) {
    boost::scoped_ptr<NakedDhcpv4Srv> srv;
709
    ASSERT_NO_THROW(srv.reset(new NakedDhcpv4Srv(0)));
710 711 712 713 714 715 716 717 718 719 720

    IOAddress hint("192.0.2.107");
    Pkt4Ptr req = Pkt4Ptr(new Pkt4(DHCPREQUEST, 1234));
    req->setRemoteAddr(IOAddress("192.0.2.1"));
    OptionPtr clientid = generateClientId();
    req->addOption(clientid);
    req->setYiaddr(hint);

    // Pass it to the server and get an advertise
    Pkt4Ptr ack = srv->processRequest(req);

721
    // Check if we get response at all
722 723 724
    checkResponse(ack, DHCPACK, 1234);
    EXPECT_EQ(hint.toText(), ack->getYiaddr().toText());

725
    // Check that address was returned from proper range, that its lease
726 727 728
    // lifetime is correct, that T1 and T2 are returned properly
    checkAddressParams(ack, subnet_);

729
    // Check identifiers
730 731 732
    checkServerId(ack, srv->getServerID());
    checkClientId(ack, clientid);

733
    // Check that the lease is really in the database
734 735 736 737 738 739
    Lease4Ptr l = checkLease(ack, clientid, req->getHWAddr(), hint);

    ASSERT_TRUE(l);
    LeaseMgrFactory::instance().deleteLease(l->addr_);
}

Tomek Mrugalski's avatar
Tomek Mrugalski committed
740 741 742 743 744 745 746 747 748 749 750 751 752 753 754
// This test verifies that incoming REQUEST can be handled properly, that an
// ACK is generated, that the response has an address and that address
// really belongs to the configured pool.
//
// constructed 3 REQUEST messages with:
// - client-id option (differs between messages)
// - hwaddr information (differs between messages)
//
// expected returned ACK message:
// - copy of client-id
// - server-id
// - assigned address (different for each client)
TEST_F(Dhcpv4SrvTest, ManyRequests) {

    boost::scoped_ptr<NakedDhcpv4Srv> srv;
755
    ASSERT_NO_THROW(srv.reset(new NakedDhcpv4Srv(0)));
Tomek Mrugalski's avatar
Tomek Mrugalski committed
756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777

    const IOAddress req_addr1("192.0.2.105");
    const IOAddress req_addr2("192.0.2.101");
    const IOAddress req_addr3("192.0.2.109");
    const IOAddress relay("192.0.2.1");

    Pkt4Ptr req1 = Pkt4Ptr(new Pkt4(DHCPOFFER, 1234));
    Pkt4Ptr req2 = Pkt4Ptr(new Pkt4(DHCPOFFER, 2345));
    Pkt4Ptr req3 = Pkt4Ptr(new Pkt4(DHCPOFFER, 3456));

    req1->setRemoteAddr(relay);
    req2->setRemoteAddr(relay);
    req3->setRemoteAddr(relay);

    req1->setYiaddr(req_addr1);
    req2->setYiaddr(req_addr2);
    req3->setYiaddr(req_addr3);

    req1->setHWAddr(generateHWAddr(6));
    req2->setHWAddr(generateHWAddr(7));
    req3->setHWAddr(generateHWAddr(8));

778
    // Different client-id sizes
Tomek Mrugalski's avatar
Tomek Mrugalski committed
779 780 781 782 783 784 785 786 787 788 789 790 791
    OptionPtr clientid1 = generateClientId(4); // length 4
    OptionPtr clientid2 = generateClientId(5); // length 5
    OptionPtr clientid3 = generateClientId(6); // length 6

    req1->addOption(clientid1);
    req2->addOption(clientid2);
    req3->addOption(clientid3);

    // Pass it to the server and get an advertise
    Pkt4Ptr ack1 = srv->processRequest(req1);
    Pkt4Ptr ack2 = srv->processRequest(req2);
    Pkt4Ptr ack3 = srv->processRequest(req3);

792
    // Check if we get response at all
Tomek Mrugalski's avatar
Tomek Mrugalski committed
793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810
    checkResponse(ack1, DHCPACK, 1234);
    checkResponse(ack2, DHCPACK, 2345);
    checkResponse(ack3, DHCPACK, 3456);

    IOAddress addr1 = ack1->getYiaddr();
    IOAddress addr2 = ack2->getYiaddr();
    IOAddress addr3 = ack3->getYiaddr();

    // Check that every client received the address it requested
    EXPECT_EQ(req_addr1.toText(), addr1.toText());
    EXPECT_EQ(req_addr2.toText(), addr2.toText());
    EXPECT_EQ(req_addr3.toText(), addr3.toText());

    // Check that the assigned address is indeed from the configured pool
    checkAddressParams(ack1, subnet_);
    checkAddressParams(ack2, subnet_);
    checkAddressParams(ack3, subnet_);

811
    // Check DUIDs
Tomek Mrugalski's avatar
Tomek Mrugalski committed
812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835
    checkServerId(ack1, srv->getServerID());
    checkServerId(ack2, srv->getServerID());
    checkServerId(ack3, srv->getServerID());
    checkClientId(ack1, clientid1);
    checkClientId(ack2, clientid2);
    checkClientId(ack3, clientid3);

    // Check that leases are in the database
    Lease4Ptr l = checkLease(ack1, clientid1, req1->getHWAddr(), addr1);
    EXPECT_TRUE(l);
    l = checkLease(ack2, clientid2, req2->getHWAddr(), addr2);
    l = checkLease(ack3, clientid3, req3->getHWAddr(), addr3);

    // Finally check that the addresses offered are different
    EXPECT_NE(addr1.toText(), addr2.toText());
    EXPECT_NE(addr2.toText(), addr3.toText());
    EXPECT_NE(addr3.toText(), addr1.toText());
    cout << "Offered address to client1=" << addr1.toText() << endl;
    cout << "Offered address to client2=" << addr2.toText() << endl;
    cout << "Offered address to client3=" << addr3.toText() << endl;
}


// This test verifies that incoming (positive) REQUEST/Renewing can be handled properly, that a
836 837 838 839 840 841 842 843 844 845
// REPLY is generated, that the response has an address and that address
// really belongs to the configured pool and that lease is actually renewed.
//
// expected:
// - returned REPLY message has copy of client-id
// - returned REPLY message has server-id
// - returned REPLY message has IA that includes IAADDR
// - lease is actually renewed in LeaseMgr
TEST_F(Dhcpv4SrvTest, RenewBasic) {
    boost::scoped_ptr<NakedDhcpv4Srv> srv;
846
    ASSERT_NO_THROW(srv.reset(new NakedDhcpv4Srv(0)));
847 848

    const IOAddress addr("192.0.2.106");
849 850 851 852
    const uint32_t temp_t1 = 50;
    const uint32_t temp_t2 = 75;
    const uint32_t temp_valid = 100;
    const time_t temp_timestamp = time(NULL) - 10;
853

854
    // Generate client-id also sets client_id_ member
855 856 857
    OptionPtr clientid = generateClientId();

    // Check that the address we are about to use is indeed in pool
858
    ASSERT_TRUE(subnet_->inPool(Lease::TYPE_V4, addr));
859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882

    // let's create a lease and put it in the LeaseMgr
    uint8_t hwaddr2[] = { 0, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe};
    Lease4Ptr used(new Lease4(IOAddress("192.0.2.106"), hwaddr2, sizeof(hwaddr2),
                              &client_id_->getDuid()[0], client_id_->getDuid().size(),
                              temp_valid, temp_t1, temp_t2, temp_timestamp,
                              subnet_->getID()));
    ASSERT_TRUE(LeaseMgrFactory::instance().addLease(used));

    // Check that the lease is really in the database
    Lease4Ptr l = LeaseMgrFactory::instance().getLease4(addr);
    ASSERT_TRUE(l);

    // Check that T1, T2, preferred, valid and cltt really set.
    // Constructed lease looks as if it was assigned 10 seconds ago
    // EXPECT_EQ(l->t1_, temp_t1);
    // EXPECT_EQ(l->t2_, temp_t2);
    EXPECT_EQ(l->valid_lft_, temp_valid);
    EXPECT_EQ(l->cltt_, temp_timestamp);

    // Let's create a RENEW
    Pkt4Ptr req = Pkt4Ptr(new Pkt4(DHCPREQUEST, 1234));
    req->setRemoteAddr(IOAddress(addr));
    req->setYiaddr(addr);
Tomek Mrugalski's avatar
Tomek Mrugalski committed
883
    req->setCiaddr(addr); // client's address
884 885 886 887 888 889 890 891 892 893 894

    req->addOption(clientid);
    req->addOption(srv->getServerID());

    // Pass it to the server and hope for a REPLY
    Pkt4Ptr ack = srv->processRequest(req);

    // Check if we get response at all
    checkResponse(ack, DHCPACK, 1234);
    EXPECT_EQ(addr.toText(), ack->getYiaddr().toText());

895
    // Check that address was returned from proper range, that its lease
896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914
    // lifetime is correct, that T1 and T2 are returned properly
    checkAddressParams(ack, subnet_);

    // Check identifiers
    checkServerId(ack, srv->getServerID());
    checkClientId(ack, clientid);

    // Check that the lease is really in the database
    l = checkLease(ack, clientid, req->getHWAddr(), addr);
    ASSERT_TRUE(l);

    // Check that T1, T2, preferred, valid and cltt were really updated
    EXPECT_EQ(l->t1_, subnet_->getT1());
    EXPECT_EQ(l->t2_, subnet_->getT2());
    EXPECT_EQ(l->valid_lft_, subnet_->getValid());

    // Checking for CLTT is a bit tricky if we want to avoid off by 1 errors
    int32_t cltt = static_cast<int32_t>(l->cltt_);
    int32_t expected = static_cast<int32_t>(time(NULL));
915
    // Equality or difference by 1 between cltt and expected is ok.
916 917 918 919 920 921 922 923 924 925
    EXPECT_GE(1, abs(cltt - expected));

    EXPECT_TRUE(LeaseMgrFactory::instance().deleteLease(addr));
}

// @todo: Implement tests for rejecting renewals

// This test verifies if the sanityCheck() really checks options presence.
TEST_F(Dhcpv4SrvTest, sanityCheck) {
    boost::scoped_ptr<NakedDhcpv4Srv> srv;
926
    ASSERT_NO_THROW(srv.reset(new NakedDhcpv4Srv(0)));
927 928

    Pkt4Ptr pkt = Pkt4Ptr(new Pkt4(DHCPDISCOVER, 1234));
929
    pkt->setHWAddr(generateHWAddr(6));
930

931
    // Server-id is optional for information-request, so
932 933
    EXPECT_NO_THROW(srv->sanityCheck(pkt, Dhcpv4Srv::OPTIONAL));

934
    // Empty packet, no server-id
935 936 937 938
    EXPECT_THROW(srv->sanityCheck(pkt, Dhcpv4Srv::MANDATORY), RFCViolation);

    pkt->addOption(srv->getServerID());

939
    // Server-id is mandatory and present = no exception
940 941
    EXPECT_NO_THROW(srv->sanityCheck(pkt, Dhcpv4Srv::MANDATORY));

942
    // Server-id is forbidden, but present => exception
943 944
    EXPECT_THROW(srv->sanityCheck(pkt, Dhcpv4Srv::FORBIDDEN),
                 RFCViolation);
945 946 947 948 949

    // There's no client-id and no HWADDR. Server needs something to
    // identify the client
    pkt->setHWAddr(generateHWAddr(0));
    EXPECT_THROW(srv->sanityCheck(pkt, Dhcpv4Srv::MANDATORY), RFCViolation);
950 951
}

Tomek Mrugalski's avatar
Tomek Mrugalski committed
952 953 954
// This test verifies that incoming (positive) RELEASE can be handled properly.
// As there is no REPLY in DHCPv4, the only thing to verify here is that
// the lease is indeed removed from the database.
955 956
TEST_F(Dhcpv4SrvTest, ReleaseBasic) {
    boost::scoped_ptr<NakedDhcpv4Srv> srv;
957
    ASSERT_NO_THROW(srv.reset(new NakedDhcpv4Srv(0)));
958 959 960 961 962 963 964 965 966 967 968

    const IOAddress addr("192.0.2.106");
    const uint32_t temp_t1 = 50;
    const uint32_t temp_t2 = 75;
    const uint32_t temp_valid = 100;
    const time_t temp_timestamp = time(NULL) - 10;

    // Generate client-id also duid_
    OptionPtr clientid = generateClientId();

    // Check that the address we are about to use is indeed in pool
969
    ASSERT_TRUE(subnet_->inPool(Lease::TYPE_V4, addr));
970

971
    // Let's create a lease and put it in the LeaseMgr
972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001
    uint8_t mac_addr[] = { 0, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe};
    HWAddrPtr hw(new HWAddr(mac_addr, sizeof(mac_addr), HTYPE_ETHER));
    Lease4Ptr used(new Lease4(addr, mac_addr, sizeof(mac_addr),
                              &client_id_->getDuid()[0], client_id_->getDuid().size(),
                              temp_valid, temp_t1, temp_t2, temp_timestamp,
                              subnet_->getID()));
    ASSERT_TRUE(LeaseMgrFactory::instance().addLease(used));

    // Check that the lease is really in the database
    Lease4Ptr l = LeaseMgrFactory::instance().getLease4(addr);
    ASSERT_TRUE(l);

    // Let's create a RELEASE
    // Generate client-id also duid_
    Pkt4Ptr rel = Pkt4Ptr(new Pkt4(DHCPRELEASE, 1234));
    rel->setRemoteAddr(addr);
    rel->setYiaddr(addr);
    rel->addOption(clientid);
    rel->addOption(srv->getServerID());
    rel->setHWAddr(hw);

    // Pass it to the server and hope for a REPLY
    // Note: this is no response to RELEASE in DHCPv4
    EXPECT_NO_THROW(srv->processRelease(rel));

    // The lease should be gone from LeaseMgr
    l = LeaseMgrFactory::instance().getLease4(addr);
    EXPECT_FALSE(l);

    // Try to get the lease by hardware address
1002 1003
    Lease4Collection leases = LeaseMgrFactory::instance().getLease4(hw->hwaddr_);
    EXPECT_EQ(leases.size(), 0);
1004

1005
    // Try to get it by hw/subnet_id combination
1006 1007 1008 1009
    l = LeaseMgrFactory::instance().getLease4(hw->hwaddr_, subnet_->getID());
    EXPECT_FALSE(l);

    // Try by client-id
1010 1011
    leases = LeaseMgrFactory::instance().getLease4(*client_id_);
    EXPECT_EQ(leases.size(), 0);
1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027

    // Try by client-id/subnet-id
    l = LeaseMgrFactory::instance().getLease4(*client_id_, subnet_->getID());
    EXPECT_FALSE(l);

    // Ok, the lease is *really* not there.
}

// This test verifies that incoming (invalid) RELEASE can be handled properly.
//
// This test checks 3 scenarios:
// 1. there is no such lease at all
// 2. there is such a lease, but it is assigned to a different IAID
// 3. there is such a lease, but it belongs to a different client
TEST_F(Dhcpv4SrvTest, ReleaseReject) {
    boost::scoped_ptr<NakedDhcpv4Srv> srv;
1028
    ASSERT_NO_THROW(srv.reset(new NakedDhcpv4Srv(0)));
1029 1030 1031 1032 1033 1034 1035

    const IOAddress addr("192.0.2.106");
    const uint32_t t1 = 50;
    const uint32_t t2 = 75;
    const uint32_t valid = 100;
    const time_t timestamp = time(NULL) - 10;

1036
    // Let's create a lease and put it in the LeaseMgr
1037 1038 1039 1040 1041 1042 1043 1044
    uint8_t bogus_mac_addr[] = { 0, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe};
    HWAddrPtr bogus_hw(new HWAddr(bogus_mac_addr, sizeof(bogus_mac_addr), HTYPE_ETHER));
    OptionPtr bogus_clientid = generateClientId(7); // different length

    // Generate client-id also duid_
    OptionPtr clientid = generateClientId();

    // Check that the address we are about to use is indeed in pool
1045
    ASSERT_TRUE(subnet_->inPool(Lease::TYPE_V4, addr));
1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063

    // Let's create a RELEASE
    // Generate client-id also duid_
    Pkt4Ptr rel = Pkt4Ptr(new Pkt4(DHCPRELEASE, 1234));
    rel->setRemoteAddr(addr);
    rel->setYiaddr(addr);
    rel->addOption(clientid);
    rel->addOption(srv->getServerID());
    rel->setHWAddr(bogus_hw);

    // Case 1: No lease known to server
    SCOPED_TRACE("CASE 1: Lease is not known to the server");

    // There is nothing to check here. The lease is not there and server does
    // not send anything back. This case is enumerated here just for keeping
    // parity with similar test in DHCPv6.
    EXPECT_NO_THROW(srv->processRelease(rel));

Tomek Mrugalski's avatar
Tomek Mrugalski committed
1064
    // CASE 2: Lease is known and belongs to this client, but to a different hardware
1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100
    SCOPED_TRACE("CASE 2: Lease is known and belongs to this client, but uses different HW addr");

    // Let's create a lease and put it in the LeaseMgr
    uint8_t mac_addr[] = { 0, 0x1, 0x2, 0x3, 0x4, 0x5};
    HWAddrPtr hw(new HWAddr(mac_addr, sizeof(mac_addr), HTYPE_ETHER));
    Lease4Ptr used(new Lease4(addr, mac_addr, sizeof(mac_addr),
                              &client_id_->getDuid()[0], client_id_->getDuid().size(),
                              valid, t1, t2, timestamp, subnet_->getID()));
    ASSERT_TRUE(LeaseMgrFactory::instance().addLease(used));
    // Check that the lease is really in the database
    Lease4Ptr l = LeaseMgrFactory::instance().getLease4(addr);
    ASSERT_TRUE(l);

    rel->setHWAddr(bogus_hw);

    EXPECT_NO_THROW(srv->processRelease(rel));

    // Check that the lease was not removed (due to hardware address mis-match)
    l = LeaseMgrFactory::instance().getLease4(addr);
    ASSERT_TRUE(l);

    // CASE 3: Lease belongs to a client with different client-id
    SCOPED_TRACE("CASE 3: Lease belongs to a client with different client-id");

    rel->setHWAddr(hw); // proper HW address this time
    rel->delOption(DHO_DHCP_CLIENT_IDENTIFIER);
    rel->addOption(bogus_clientid); // but invalid client-id

    OptionPtr x = rel->getOption(DHO_DHCP_CLIENT_IDENTIFIER);

    EXPECT_NO_THROW(srv->processRelease(rel));

    // Check that the lease is still there
    l = LeaseMgrFactory::instance().getLease4(addr);
    ASSERT_TRUE(l);

Tomek Mrugalski's avatar
Tomek Mrugalski committed
1101
    // Final sanity check. Verify that with valid hw and client-id release is successful
1102 1103 1104
    rel->delOption(DHO_DHCP_CLIENT_IDENTIFIER);
    rel->addOption(clientid);

Tomek Mrugalski's avatar
Tomek Mrugalski committed
1105
    // It should work this time
1106 1107
    EXPECT_NO_THROW(srv->processRelease(rel));

Tomek Mrugalski's avatar
Tomek Mrugalski committed
1108
    // Check that the lease is not there
1109 1110 1111
    l = LeaseMgrFactory::instance().getLease4(addr);
    EXPECT_FALSE(l);
}
1112

1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142
// This test verifies if the server-id disk operations (read, write) are
// working properly.
TEST_F(Dhcpv4SrvTest, ServerID) {
    NakedDhcpv4Srv srv(0);

    string srvid_text = "192.0.2.100";
    IOAddress srvid(srvid_text);

    fstream file1(SRVID_FILE, ios::out | ios::trunc);
    file1 << srvid_text;
    file1.close();

    // Test reading from a file
    EXPECT_TRUE(srv.loadServerID(SRVID_FILE));
    ASSERT_TRUE(srv.getServerID());
    EXPECT_EQ(srvid_text, srv.srvidToString(srv.getServerID()));

    // Now test writing to a file
    EXPECT_EQ(0, unlink(SRVID_FILE));
    EXPECT_NO_THROW(srv.writeServerID(SRVID_FILE));

    fstream file2(SRVID_FILE, ios::in);
    ASSERT_TRUE(file2.good());
    string text;
    file2 >> text;
    file2.close();

    EXPECT_EQ(srvid_text, text);
}

1143
// Checks if received relay agent info option is echoed back to the client
1144 1145 1146 1147 1148 1149 1150
TEST_F(Dhcpv4SrvTest, relayAgentInfoEcho) {

    NakedDhcpv4Srv srv(0);

    // Let's create a relayed DISCOVER. This particular relayed DISCOVER has
    // added option 82 (relay agent info) with 3 suboptions. The server
    // is supposed to echo it back in its response.
Tomek Mrugalski's avatar
Tomek Mrugalski committed
1151 1152
    Pkt4Ptr dis;
    ASSERT_NO_THROW(dis = captureRelayedDiscover());
1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180

    // Simulate that we have received that traffic
    srv.fakeReceive(dis);

    // Server will now process to run its normal loop, but instead of calling
    // IfaceMgr::receive4(), it will read all packets from the list set by
    // fakeReceive()
    // In particular, it should call registered buffer4_receive callback.
    srv.run();

    // Check that the server did send a reposonse
    ASSERT_EQ(1, srv.fake_sent_.size());

    // Make sure that we received a response
    Pkt4Ptr offer = srv.fake_sent_.front();
    ASSERT_TRUE(offer);

    // Get Relay Agent Info from query...
    OptionPtr rai_query = dis->getOption(DHO_DHCP_AGENT_OPTIONS);
    ASSERT_TRUE(rai_query);

    // Get Relay Agent Info from response...
    OptionPtr rai_response = offer->getOption(DHO_DHCP_AGENT_OPTIONS);
    ASSERT_TRUE(rai_response);

    EXPECT_TRUE(rai_response->equal(rai_query));
}