Commit 932fd5d1 authored by Tomek Mrugalski's avatar Tomek Mrugalski 🛰
Browse files

[3399] Two example Kea4 configs added.

parent 029b75a1
# This is an example configuration file for DHCPv4 server in Kea.
# It's a basic scenario with four IPv6 subnets configured. In each
# subnet, there's a smaller pool of dynamic addresses.
{ "Dhcp4":
{
# Kea is told to listen on eth0 interface only.
"interfaces": [ "eth0" ],
# We need to specify lease type. As of May 2014, three backends are supported:
# memfile, mysql and pgsql. We'll just use memfile, because it doesn't require
# any prior set up.
"lease-database": {
"type": "memfile"
},
# Addresses will be assigned with preferred and valid lifetimes
# being 3000 and 4000, respectively. Client is told to start
# renewing after 1000 seconds. If the server does not repond
# after 2000 seconds since the lease was granted, client is supposed
# to start REBIND procedure (emergency renewal that allows switching
# to a different server).
"valid-lifetime": 4000,
"renew-timer": 1000,
"rebind-timer": 2000,
# The following list defines subnets. Each subnet consists of at
# least subnet and pool entries.
"subnet4": [
{ "pool": [ "192.0.2.1 - 192.0.2.200" ],
"subnet": "192.0.2.0/24" },
{ "pool": [ "192.0.3.100 - 192.0.3.200" ],
"subnet": "192.0.3.0/24" },
{ "pool": [ "192.0.4.1 - 192.0.4.254" ],
"subnet": "192.0.4.0/24" } ]
}
}
# This is an example configuration file for DHCPv4 server in Kea.
# It's a basic scenario with four IPv6 subnets configured. In each
# subnet, there's a smaller pool of dynamic addresses.
{ "Dhcp4":
{
# Kea is told to listen on eth0 interface only.
"interfaces": [ "eth0" ],
# We need to specify lease type. As of May 2014, three backends are supported:
# memfile, mysql and pgsql. We'll just use memfile, because it doesn't require
# any prior set up.
"lease-database": {
"type": "memfile"
},
# Addresses will be assigned with preferred and valid lifetimes
# being 3000 and 4000, respectively. Client is told to start
# renewing after 1000 seconds. If the server does not repond
# after 2000 seconds since the lease was granted, client is supposed
# to start REBIND procedure (emergency renewal that allows switching
# to a different server).
"valid-lifetime": 4000,
"renew-timer": 1000,
"rebind-timer": 2000,
# The following list defines subnets. We have only one subnet
# here.
"subnet4": [
{ "pool": [ "192.0.2.1 - 192.0.2.200" ],
"subnet": "192.0.2.0/24" } ]
}
}
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment