Commit 96decbf0 authored by Jeremy C. Reed's avatar Jeremy C. Reed

[master] use reorder_message_file.py to order .mes files

parent 1f5a0774
......@@ -42,17 +42,17 @@ server is about to open sockets on the specified port.
The IPv4 DHCP server has received a packet that it is unable to
interpret. The reason why the packet is invalid is included in the message.
% DHCP4_PACKET_RECEIVE_FAIL error on attempt to receive packet: %1
The IPv4 DHCP server tried to receive a packet but an error
occured during this attempt. The reason for the error is included in
the message.
% DHCP4_PACKET_RECEIVED %1 (type %2) packet received on interface %3
A debug message noting that the server has received the specified type of
packet on the specified interface. Note that a packet marked as UNKNOWN
may well be a valid DHCP packet, just a type not expected by the server
(e.g. it will report a received OFFER packet as UNKNOWN).
% DHCP4_PACKET_RECEIVE_FAIL error on attempt to receive packet: %1
The IPv4 DHCP server tried to receive a packet but an error
occured during this attempt. The reason for the error is included in
the message.
% DHCP4_PACKET_SEND_FAIL failed to send DHCPv4 packet: %1
This error is output if the IPv4 DHCP server fails to send an assembled
DHCP message to a client. The reason for the error is included in the
......
......@@ -26,6 +26,31 @@ to establish a session with the BIND 10 control channel.
A debug message listing the command (and possible arguments) received
from the BIND 10 control system by the IPv6 DHCP server.
% DHCP6_CONFIG_COMPLETE DHCPv6 server has completed configuration: %1
This is an informational message announcing the successful processing of a
new configuration. it is output during server startup, and when an updated
configuration is committed by the administrator. Additional information
may be provided.
% DHCP6_CONFIG_LOAD_FAIL failed to load configuration: %1
This critical error message indicates that the initial DHCPv6
configuration has failed. The server will start, but nothing will be
served until the configuration has been corrected.
% DHCP6_CONFIG_NEW_SUBNET a new subnet has been added to configuration: %1
This is an informational message reporting that the configuration has
been extended to include the specified subnet.
% DHCP6_CONFIG_OPTION_DUPLICATE multiple options with the code: %1 added to the subnet: %2
This warning message is issued on attempt to configure multiple options with the
same option code for the particular subnet. Adding multiple options is uncommon
for DHCPv6, yet it is not prohibited.
% DHCP6_CONFIG_START DHCPv6 server is processing the following configuration: %1
This is a debug message that is issued every time the server receives a
configuration. That happens start up and also when a server configuration
change is committed by the administrator.
% DHCP6_CONFIG_UPDATE updated configuration received: %1
A debug message indicating that the IPv6 DHCP server has received an
updated configuration from the BIND 10 configuration system.
......@@ -35,53 +60,65 @@ This informational message is printed every time DHCPv6 is started.
It indicates what database backend type is being to store lease and
other information.
% DHCP6_NOT_RUNNING IPv6 DHCP server is not running
A warning message is issued when an attempt is made to shut down the
IPv6 DHCP server but it is not running.
% DHCP6_NO_INTERFACES failed to detect any network interfaces
During startup the IPv6 DHCP server failed to detect any network
interfaces and is therefore shutting down.
% DHCP6_OPEN_SOCKET opening sockets on port %1
A debug message issued during startup, this indicates that the IPv6 DHCP
server is about to open sockets on the specified port.
% DHCP6_LEASE_ADVERT lease %1 advertised (client duid=%2, iaid=%3)
This debug message indicates that the server successfully advertised
a lease. It is up to the client to choose one server out of othe advertised
and continue allocation with that server. This is a normal behavior and
indicates successful operation.
% DHCP6_LEASE_ALLOC lease %1 has been allocated (client duid=%2, iaid=%3)
This debug message indicates that the server successfully granted (in
response to client's REQUEST message) a lease. This is a normal behavior
and incicates successful operation.
% DHCP6_LEASE_ADVERT_FAIL failed to advertise a lease for client duid=%1, iaid=%2
This message indicates that the server failed to advertise (in response to
received SOLICIT) a lease for a given client. There may be many reasons for
such failure. Each specific failure is logged in a separate log entry.
% DHCP6_LEASE_ALLOC lease %1 has been allocated (client duid=%2, iaid=%3)
This debug message indicates that the server successfully granted (in
response to client's REQUEST message) a lease. This is a normal behavior
and incicates successful operation.
% DHCP6_LEASE_ALLOC_FAIL failed to grant a lease for client duid=%1, iaid=%2
This message indicates that the server failed to grant (in response to
received REQUEST) a lease for a given client. There may be many reasons for
such failure. Each specific failure is logged in a separate log entry.
% DHCP6_NOT_RUNNING IPv6 DHCP server is not running
A warning message is issued when an attempt is made to shut down the
IPv6 DHCP server but it is not running.
% DHCP6_NO_INTERFACES failed to detect any network interfaces
During startup the IPv6 DHCP server failed to detect any network
interfaces and is therefore shutting down.
% DHCP6_NO_SUBNET_DEF_OPT failed to find subnet for address %1 when adding default options
This warning message indicates that when attempting to add default options
to a response, the server found that it was not configured to support
the subnet from which the DHCPv6 request was received. The packet has
been ignored.
% DHCP6_NO_SUBNET_REQ_OPT failed to find subnet for address %1 when adding requested options
This warning message indicates that when attempting to add requested
options to a response, the server found that it was not configured
to support the subnet from which the DHCPv6 request was received.
The packet has been ignored.
% DHCP6_OPEN_SOCKET opening sockets on port %1
A debug message issued during startup, this indicates that the IPv6 DHCP
server is about to open sockets on the specified port.
% DHCP6_PACKET_PARSE_FAIL failed to parse incoming packet
The IPv6 DHCP server has received a packet that it is unable to interpret.
% DHCP6_PACKET_RECEIVE_FAIL error on attempt to receive packet: %1
The IPv6 DHCP server tried to receive a packet but an error
occured during this attempt. The reason for the error is included in
the message.
% DHCP6_PACKET_RECEIVED %1 packet received
A debug message noting that the server has received the specified type
of packet. Note that a packet marked as UNKNOWN may well be a valid
DHCP packet, just a type not expected by the server (e.g. it will report
a received OFFER packet as UNKNOWN).
% DHCP6_PACKET_RECEIVE_FAIL error on attempt to receive packet: %1
The IPv6 DHCP server tried to receive a packet but an error
occured during this attempt. The reason for the error is included in
the message.
% DHCP6_PACKET_SEND_FAIL failed to send DHCPv6 packet: %1
This error is output if the IPv6 DHCP server fails to send an assembled
DHCP message to a client. The reason for the error is included in the
......@@ -152,40 +189,3 @@ which the DHCPv6 server has not been configured. The cause is most likely due
to a misconfiguration of the server. The packet processing will continue, but
the response will only contain generic configuration parameters and no
addresses or prefixes.
% DHCP6_NO_SUBNET_DEF_OPT failed to find subnet for address %1 when adding default options
This warning message indicates that when attempting to add default options
to a response, the server found that it was not configured to support
the subnet from which the DHCPv6 request was received. The packet has
been ignored.
% DHCP6_NO_SUBNET_REQ_OPT failed to find subnet for address %1 when adding requested options
This warning message indicates that when attempting to add requested
options to a response, the server found that it was not configured
to support the subnet from which the DHCPv6 request was received.
The packet has been ignored.
% DHCP6_CONFIG_LOAD_FAIL failed to load configuration: %1
This critical error message indicates that the initial DHCPv6
configuration has failed. The server will start, but nothing will be
served until the configuration has been corrected.
% DHCP6_CONFIG_START DHCPv6 server is processing the following configuration: %1
This is a debug message that is issued every time the server receives a
configuration. That happens start up and also when a server configuration
change is committed by the administrator.
% DHCP6_CONFIG_NEW_SUBNET a new subnet has been added to configuration: %1
This is an informational message reporting that the configuration has
been extended to include the specified subnet.
% DHCP6_CONFIG_COMPLETE DHCPv6 server has completed configuration: %1
This is an informational message announcing the successful processing of a
new configuration. it is output during server startup, and when an updated
configuration is committed by the administrator. Additional information
may be provided.
% DHCP6_CONFIG_OPTION_DUPLICATE multiple options with the code: %1 added to the subnet: %2
This warning message is issued on attempt to configure multiple options with the
same option code for the particular subnet. Adding multiple options is uncommon
for DHCPv6, yet it is not prohibited.
......@@ -24,6 +24,10 @@ The stats module was unable to connect to the BIND 10 command and
control bus. A likely problem is that the message bus daemon
(b10-msgq) is not running. The stats module will now shut down.
% STATS_RECEIVED_INVALID_STATISTICS_DATA received invalid statistics data from %1
Invalid statistics data has been received from the module while
polling and it has been discarded.
% STATS_RECEIVED_NEW_CONFIG received new configuration: %1
This debug message is printed when the stats module has received a
configuration update from the configuration manager.
......@@ -53,10 +57,6 @@ response indicating that it is running normally.
An unknown command has been sent to the stats module. The stats module
will respond with an error and the command will be ignored.
% STATS_RECEIVED_INVALID_STATISTICS_DATA received invalid statistics data from %1
Invalid statistics data has been received from the module while
polling and it has been discarded.
% STATS_SEND_STATISTICS_REQUEST requesting %1 to send statistics
This debug message is printed when a request is sent to the module
to send its data to the stats module.
......
......@@ -107,10 +107,6 @@ received from the configuration manager.
The xfrout daemon received a command on the command channel that
NOTIFY packets should be sent for the given zone.
% XFROUT_RECEIVED_GETSTATS_COMMAND received command to get statistics data
The xfrout daemon received a command on the command channel that
statistics data should be sent to the stats daemon.
% XFROUT_PARSE_QUERY_ERROR error parsing query: %1
There was a parse error while reading an incoming query. The parse
error is shown in the log message. A remote client sent a packet we
......@@ -151,6 +147,10 @@ given host. This is because of ACLs. The %2 represents the IP
address and port of the peer requesting the transfer, and the %3
represents the zone name and class.
% XFROUT_RECEIVED_GETSTATS_COMMAND received command to get statistics data
The xfrout daemon received a command on the command channel that
statistics data should be sent to the stats daemon.
% XFROUT_RECEIVED_SHUTDOWN_COMMAND shutdown command received
The xfrout daemon received a shutdown command from the command channel
and will now shut down.
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment