Commit f8a10fb0 authored by Tomek Mrugalski's avatar Tomek Mrugalski 🛰 Committed by Francis Dupont

[#141,!43] Docs updated to sysrepo 0.7.5, libyang 0.16-r1

parent fb424f8f
......@@ -38,12 +38,13 @@ $ sudo apt-get install git cmake build-essential bison flex libpcre3-dev libev-d
</para>
<para>STEP 2. Install libyang. Download libyang from
https://github.com/CESNET/libyang.git. Checkout the devel branch.
<link xmlns:xlink="http://www.w3.org/1999/xlink"
xlink:href="https://github.com/CESNET/libyang/releases" />. The version used
during Kea development was 0.16-r1.
<screen>
git clone https://github.com/CESNET/libyang.git
cd libyang
git checkout devel
libyang-0.16-r1.tar.gz
cd libyang-0.16-r1
mkdir build
cd build
cmake ..
......@@ -51,15 +52,18 @@ $ sudo apt-get install git cmake build-essential bison flex libpcre3-dev libev-d
sudo make install
</screen>
For detailed build instructions, see https://github.com/CESNET/libyang/.</para>
For detailed build instructions, see
<link xmlns:xlink="http://www.w3.org/1999/xlink"
xlink:href="https://github.com/CESNET/libyang" /></para>
<para>STEP 3. Install syrepo. Download sysrepo from
https://github.com/sysrepo/sysrepo.git. Checkout the last devel branch.
<link xmlns:xlink="http://www.w3.org/1999/xlink"
xlink:href="https://github.com/sysrepo/sysrepo/releases" />.
The version used during Kea development was 0.7.5.
<screen>
git clone https://github.com/sysrepo/sysrepo.git
cd sysrepo
git checkout devel
tar zxvf sysrepo-0.7.5.tar.gz
cd sysrepo-0.7.5
mkdir build
cd build
cmake -DCMAKE_BUILD_TYPE=Debug -DGEN_LANGUAGE_BINDINGS=ON -DGEN_CPP_BINDINGS=ON\
......@@ -69,7 +73,8 @@ sudo make install
</screen>
For detailed instructions, see Build &amp; Installation Steps Section on the project page
located at https://github.com/sysrepo/sysrepo.
located at <link xmlns:xlink="http://www.w3.org/1999/xlink"
xlink:href="https://github.com/sysrepo/sysrepo" />.
</para>
</section>
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment