git-svn-id: svn://bind10.isc.org/svn/bind10/trunk@1305 e5f2f494-b856-4b98-b285-d166d9295462

- introduced new macro UNUSED_PARAM to tell gcc that particular variables are
  intentionally unused
- enabled -Wextra by default


git-svn-id: svn://bind10.isc.org/svn/bind10/trunk@1304 e5f2f494-b856-4b98-b285-d166d9295462

(I removed this from my on-commit autobuilder custom flags.)
Note that it doesn't have -Werror.


git-svn-id: svn://bind10.isc.org/svn/bind10/trunk@1302 e5f2f494-b856-4b98-b285-d166d9295462

specifying only --with-boostlib in configure makes make stop because $boostlib will be set to 'yes', so we need to test the system libraries in that case too


git-svn-id: svn://bind10.isc.org/svn/bind10/trunk@1282 e5f2f494-b856-4b98-b285-d166d9295462

Move usermgr from "trunk/tools/" to "trunk/src/bin" according Jeremy's suggestion. usermgr can be installed now.  

git-svn-id: svn://bind10.isc.org/svn/bind10/trunk@1272 e5f2f494-b856-4b98-b285-d166d9295462

git-svn-id: svn://bind10.isc.org/svn/bind10/trunk@1262 e5f2f494-b856-4b98-b285-d166d9295462

(So user can choose there own on configure line and
also don't lose what configure detects and assigns.)

Add a TODO: check for _sqlite3.py module


git-svn-id: svn://bind10.isc.org/svn/bind10/trunk@1254 e5f2f494-b856-4b98-b285-d166d9295462

boost library (and boost::asio)


git-svn-id: svn://bind10.isc.org/svn/bind10/trunk@1253 e5f2f494-b856-4b98-b285-d166d9295462

with ${top_dir}/config.h.


git-svn-id: svn://bind10.isc.org/svn/bind10/trunk@1251 e5f2f494-b856-4b98-b285-d166d9295462

git-svn-id: svn://bind10.isc.org/svn/bind10/trunk@1235 e5f2f494-b856-4b98-b285-d166d9295462

the ASIO version or the builtin socket API version depending on the
availability of the boost::system library.


git-svn-id: svn://bind10.isc.org/svn/bind10/branches/jinmei-asio@1226 e5f2f494-b856-4b98-b285-d166d9295462

Adding wait for retry on process failure.



git-svn-id: svn://bind10.isc.org/svn/bind10/trunk@1220 e5f2f494-b856-4b98-b285-d166d9295462

git-svn-id: svn://bind10.isc.org/svn/bind10/branches/jinmei-asio@1195 e5f2f494-b856-4b98-b285-d166d9295462

git-svn-id: svn://bind10.isc.org/svn/bind10/trunk@1141 e5f2f494-b856-4b98-b285-d166d9295462

git-svn-id: svn://bind10.isc.org/svn/bind10/trunk@1139 e5f2f494-b856-4b98-b285-d166d9295462

I don't know if this is perfect, but I read that the sqlite3_prepare_v2 API
was added in 3.3.9.


git-svn-id: svn://bind10.isc.org/svn/bind10/trunk@1135 e5f2f494-b856-4b98-b285-d166d9295462

git-svn-id: svn://bind10.isc.org/svn/bind10/trunk@1133 e5f2f494-b856-4b98-b285-d166d9295462

This is based on ideas done in experiments/jreed-layout, but
I manually did this again.

Moved around directory structures.
A single python subdirectory under src/lib for single "isc" module.
No "cpp" directories.

No pyshared or includes symlink trees.

I tested running the c++ tests and python tests.
I tested running run_bind10.sh from source tree (with nothing installed).
I tested running bind10 from installed (after moving source).


git-svn-id: svn://bind10.isc.org/svn/bind10/trunk@1120 e5f2f494-b856-4b98-b285-d166d9295462

git-svn-id: svn://bind10.isc.org/svn/bind10/trunk@1069 e5f2f494-b856-4b98-b285-d166d9295462

git-svn-id: svn://bind10.isc.org/svn/bind10/trunk@1058 e5f2f494-b856-4b98-b285-d166d9295462

git-svn-id: svn://bind10.isc.org/svn/bind10/trunk@1057 e5f2f494-b856-4b98-b285-d166d9295462

git-svn-id: svn://bind10.isc.org/svn/bind10/trunk@1044 e5f2f494-b856-4b98-b285-d166d9295462

removed a few prints from cfgmgr


git-svn-id: svn://bind10.isc.org/svn/bind10/trunk@1002 e5f2f494-b856-4b98-b285-d166d9295462

ticket #50 for full details)


git-svn-id: svn://bind10.isc.org/svn/bind10/trunk@988 e5f2f494-b856-4b98-b285-d166d9295462

2. Add login idle timeout for cmdctl, default idle time is 1200 seconds.
3. Refactor some code for cmdctl.

git-svn-id: svn://bind10.isc.org/svn/bind10/trunk@961 e5f2f494-b856-4b98-b285-d166d9295462

git-svn-id: svn://bind10.isc.org/svn/bind10/trunk@785 e5f2f494-b856-4b98-b285-d166d9295462

git-svn-id: svn://bind10.isc.org/svn/bind10/trunk@784 e5f2f494-b856-4b98-b285-d166d9295462

git-svn-id: svn://bind10.isc.org/svn/bind10/branches/jinmei-dnsrdata2@742 e5f2f494-b856-4b98-b285-d166d9295462

don't forget to make clean and autoreconf again


git-svn-id: svn://bind10.isc.org/svn/bind10/branches/parkinglot@735 e5f2f494-b856-4b98-b285-d166d9295462

git-svn-id: svn://bind10.isc.org/svn/bind10/branches/parkinglot@731 e5f2f494-b856-4b98-b285-d166d9295462

started with unittests for config/python


git-svn-id: svn://bind10.isc.org/svn/bind10/branches/parkinglot@719 e5f2f494-b856-4b98-b285-d166d9295462

for bind10-10.0.0.  This defines @PACKAGE@ or $PACKAGE used for
installation subdirectory names.


git-svn-id: svn://bind10.isc.org/svn/bind10/branches/parkinglot@711 e5f2f494-b856-4b98-b285-d166d9295462

git-svn-id: svn://bind10.isc.org/svn/bind10/branches/parkinglot@708 e5f2f494-b856-4b98-b285-d166d9295462

git-svn-id: svn://bind10.isc.org/svn/bind10/branches/parkinglot@695 e5f2f494-b856-4b98-b285-d166d9295462

(This now builds the b10-auth binary.  The b10-parkinglot binary is
still being built for reference purposes, but is expected to be removed.
Both programs use port 5300, so they cannot be run simultaneously.)


git-svn-id: svn://bind10.isc.org/svn/bind10/branches/parkinglot@690 e5f2f494-b856-4b98-b285-d166d9295462

- introduced unified auto-code generation with a python script for the rdata
  related definitions


git-svn-id: svn://bind10.isc.org/svn/bind10/branches/parkinglot@633 e5f2f494-b856-4b98-b285-d166d9295462

(it is renamed from b10-cfgmgr.py.)
And path for the modules is added.

Move b10-cfgmgr.in to run_b10-cfgmgr.sh.in
(this is used to run in source tree).

For these shell scripts, run from abs_top_builddir not abs_top_srcdir.
(I will do a later commit for the execute permissions.)


git-svn-id: svn://bind10.isc.org/svn/bind10/branches/parkinglot@620 e5f2f494-b856-4b98-b285-d166d9295462

Move b10-cmdctl.py to b10-cmdctl.py.in.

Move msgq.in to run_msgq.sh.in.
Move msgq.py to msgq.py.in.

At same time, the new installed versions are installed to libexec
directory and runnable from there.

TODO: the run*sh.in scripts are still broken (before my commits)
as they use abs_top_srcdir instead of builddir.


git-svn-id: svn://bind10.isc.org/svn/bind10/branches/parkinglot@615 e5f2f494-b856-4b98-b285-d166d9295462

can be ran from source tree.

Rename bind10.py to bind10.py.in -- this is the bind10 tool. It
has the python and python module path added to it.

The python script will actually startup from installed directory.

TODO: bind10 will run daemons from @libexecdir@ (I will commit those
daemon install changes shortly).
TODO: don't need special python handling.
TODO: split out all functionality to a bind10 specific module


git-svn-id: svn://bind10.isc.org/svn/bind10/branches/parkinglot@613 e5f2f494-b856-4b98-b285-d166d9295462

git-svn-id: svn://bind10.isc.org/svn/bind10/branches/parkinglot@612 e5f2f494-b856-4b98-b285-d166d9295462