dhcpsrv_messages.mes 49.8 KB
Newer Older
1
# Copyright (C) 2012-2017 Internet Systems Consortium, Inc. ("ISC")
2
#
3
4
5
# This Source Code Form is subject to the terms of the Mozilla Public
# License, v. 2.0. If a copy of the MPL was not distributed with this
# file, You can obtain one at http://mozilla.org/MPL/2.0/.
6
7
8

$NAMESPACE isc::dhcp

9
% DHCPSRV_CFGMGR_ADD_IFACE listening on interface %1
10
11
An info message issued when a new interface is being added to the collection of
interfaces on which the server listens to DHCP messages.
12

13
14
15
16
17
18
19
20
% DHCPSRV_CFGMGR_ADD_SUBNET4 adding subnet %1
A debug message reported when the DHCP configuration manager is adding the
specified IPv4 subnet to its database.

% DHCPSRV_CFGMGR_ADD_SUBNET6 adding subnet %1
A debug message reported when the DHCP configuration manager is adding the
specified IPv6 subnet to its database.

21
% DHCPSRV_CFGMGR_ALL_IFACES_ACTIVE enabling listening on all interfaces
22
A debug message issued when the server is being configured to listen on all
23
24
interfaces.

25
26
27
% DHCPSRV_CFGMGR_CFG_DHCP_DDNS Setting DHCP-DDNS configuration to: %1
A debug message issued when the server's DHCP-DDNS settings are changed.

28
29
30
31
32
33
% DHCPSRV_CFGMGR_CLEAR_ACTIVE_IFACES stop listening on all interfaces
A debug message issued when configuration manager clears the internal list
of active interfaces. This doesn't prevent the server from listening to
the DHCP traffic through open sockets, but will rather be used by Interface
Manager to select active interfaces when sockets are re-opened.

34
35
36
37
38
39
40
41
42
43
44
45
46
% DHCPSRV_CFGMGR_CONFIGURE_SERVERID server configuration includes specification of a server identifier
This warning message is issued when the server specified configuration of
a server identifier. If this new configuration overrides an existing
server identifier, this will affect existing bindings of the clients.
Clients will use old server identifier when they renew their bindings.
The server will not respond to those renews, and the clients will
eventually transition to rebinding state. The server should reassign
existing bindings and the clients will subsequently use new server
identifier. It is recommended to not modify the server identifier, unless
there is a good reason for it, to avoid increased number of renewals and
a need for rebinding (increase of multicast traffic, which may be received
by multiple servers).

47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
% DHCPSRV_CFGMGR_NO_SUBNET4 no suitable subnet is defined for address hint %1
This debug message is output when the DHCP configuration manager has received
a request for an IPv4 subnet for the specified address, but no such
subnet exists.

% DHCPSRV_CFGMGR_NO_SUBNET6 no suitable subnet is defined for address hint %1
This debug message is output when the DHCP configuration manager has received
a request for an IPv6 subnet for the specified address, but no such
subnet exists.

% DHCPSRV_CFGMGR_ONLY_SUBNET4 retrieved subnet %1 for address hint %2
This is a debug message reporting that the DHCP configuration manager has
returned the specified IPv4 subnet when given the address hint specified
because it is the only subnet defined.

% DHCPSRV_CFGMGR_ONLY_SUBNET6 retrieved subnet %1 for address hint %2
This is a debug message reporting that the DHCP configuration manager has
returned the specified IPv6 subnet when given the address hint specified
because it is the only subnet defined.

67
% DHCPSRV_CFGMGR_SOCKET_RAW_UNSUPPORTED use of raw sockets is unsupported on this OS, UDP sockets will be used
68
69
70
71
72
73
74
This warning message is logged when the user specified that the
DHCPv4 server should use the raw sockets to receive the DHCP
messages and respond to the clients, but the use of raw sockets
is not supported on the particular environment. The raw sockets
are useful when the server must respond to the directly connected
clients which don't have an address yet. If the raw sockets are
not supported by Kea on the particular platform, Kea will fall
75
back to use of the IP/UDP sockets. The responses to
76
77
78
the directly connected clients will be broadcast. The responses
to relayed clients will be unicast as usual.

79
80
81
82
83
% DHCPSRV_CFGMGR_SOCKET_TYPE_DEFAULT "dhcp-socket-type" not specified , using default socket type %1
This informational message is logged when the administrator hasn't
specified the "dhcp-socket-type" parameter in configuration for interfaces.
In such case, the default socket type will be used.

84
% DHCPSRV_CFGMGR_SOCKET_TYPE_SELECT using socket type %1
85
86
87
88
89
90
This informational message is logged when the DHCPv4 server selects the
socket type to be used for all sockets that will be opened on the
interfaces. Typically, the socket type is specified by the server
administrator. If the socket type hasn't been specified, the raw
socket will be selected. If the raw socket has been selected but
Kea doesn't support the use of raw sockets on the particular
91
OS, it will use an UDP socket instead.
92

93
94
95
96
97
% DHCPSRV_CFGMGR_SUBNET4 retrieved subnet %1 for address hint %2
This is a debug message reporting that the DHCP configuration manager has
returned the specified IPv4 subnet when given the address hint specified
as the address is within the subnet.

98
99
% DHCPSRV_CFGMGR_SUBNET4_ADDR selected subnet %1 for packet received by matching address %2
This is a debug message reporting that the DHCP configuration manager
100
101
has returned the specified IPv4 subnet for a received packet. This particular
subnet was selected, because an IPv4 address was matched which belonged to that
102
103
104
105
106
subnet.

% DHCPSRV_CFGMGR_SUBNET4_IFACE selected subnet %1 for packet received over interface %2
This is a debug message reporting that the DHCP configuration manager
has returned the specified IPv4 subnet for a packet received over
107
108
the given interface.  This particular subnet was selected, because it
was specified as being directly reachable over the given interface. (see
109
110
'interface' parameter in the subnet4 definition).

111
112
113
114
115
% DHCPSRV_CFGMGR_SUBNET4_RELAY selected subnet %1, because of matching relay addr %2
This is a debug message reporting that the DHCP configuration manager has
returned the specified IPv4 subnet, because detected relay agent address
matches value specified for this subnet.

116
117
118
119
120
% DHCPSRV_CFGMGR_SUBNET6 retrieved subnet %1 for address hint %2
This is a debug message reporting that the DHCP configuration manager has
returned the specified IPv6 subnet when given the address hint specified
as the address is within the subnet.

121
% DHCPSRV_CFGMGR_SUBNET6_IFACE selected subnet %1 for packet received over interface %2
122
123
124
125
This is a debug message reporting that the DHCP configuration manager
has returned the specified IPv6 subnet for a packet received over
given interface.  This particular subnet was selected, because it
was specified as being directly reachable over given interface. (see
126
'interface' parameter in the subnet6 definition).
127

128
129
130
131
% DHCPSRV_CFGMGR_SUBNET6_IFACE_ID selected subnet %1 (interface-id match) for incoming packet
This is a debug message reporting that the DHCP configuration manager
has returned the specified IPv6 subnet for a received packet. This particular
subnet was selected, because value of interface-id option matched what was
132
configured in the server's interface-id option for that selected subnet6.
133
(see 'interface-id' parameter in the subnet6 definition).
134

135
136
137
138
139
% DHCPSRV_CFGMGR_SUBNET6_RELAY selected subnet %1, because of matching relay addr %2
This is a debug message reporting that the DHCP configuration manager has
returned the specified IPv6 subnet, because detected relay agent address
matches value specified for this subnet.

140
141
142
143
144
% DHCPSRV_CFGMGR_UNICAST_LINK_LOCAL specified link local address %1 for unicast traffic on interface %2
This warning message is logged when user specified a link-local address to
receive unicast traffic. The warning message is issued because it is an
uncommon use.

145
% DHCPSRV_CFGMGR_USE_ADDRESS listening on address %1, on interface %2
146
A message issued when the server is configured to listen on the explicitly specified
147
148
IP address on the given interface.

149
% DHCPSRV_CFGMGR_USE_UNICAST listening on unicast address %1, on interface %2
150
An info message issued when configuring the DHCP server to listen on the unicast
151
152
address on the specific interface.

153
% DHCPSRV_CLOSE_DB closing currently open %1 database
Stephen Morris's avatar
Stephen Morris committed
154
155
This is a debug message, issued when the DHCP server closes the currently
open lease database.  It is issued at program shutdown and whenever
156
157
158
159
the database access parameters are changed: in the latter case, the
server closes the currently open database, and opens a database using
the new parameters.

160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
% DHCPSRV_CQL_ADD_ADDR4 adding IPv4 lease with address %1
A debug message issued when the server is about to add an IPv4 lease
with the specified address to the Cassandra backend database.

% DHCPSRV_CQL_ADD_ADDR6 adding IPv6 lease with address %1
A debug message issued when the server is about to add an IPv6 lease
with the specified address to the Cassandra backend database.

% DHCPSRV_CQL_COMMIT committing to Cassandra database
A commit call been issued on the server. For Cassandra, this is a no-op.

% DHCPSRV_CQL_DB opening Cassandra lease database: %1
This informational message is logged when a DHCP server (either V4 or
V6) is about to open a Cassandra lease database.  The parameters of
the connection including database name and username needed to access it
(but not the password if any) are logged.

% DHCPSRV_CQL_DELETE_ADDR deleting lease for address %1
A debug message issued when the server is attempting to delete a lease from the
Cassandra database for the specified address.

% DHCPSRV_CQL_DELETE_EXPIRED_RECLAIMED4 deleting reclaimed IPv4 leases that expired more than %1 seconds ago
A debug message issued when the server is removing reclaimed DHCPv4
leases which have expired longer than a specified period of time.
The argument is the amount of time Kea waits after a reclaimed
lease expires before considering its removal.

% DHCPSRV_CQL_DELETE_EXPIRED_RECLAIMED6 deleting reclaimed IPv6 leases that expired more than %1 seconds ago
A debug message issued when the server is removing reclaimed DHCPv6
leases which have expired longer than a specified period of time.
The argument is the amount of time Kea waits after a reclaimed
lease expires before considering its removal.

% DHCPSRV_CQL_GET_ADDR4 obtaining IPv4 lease for address %1
A debug message issued when the server is attempting to obtain an IPv4
lease from the Cassandra database for the specified address.

% DHCPSRV_CQL_GET_ADDR6 obtaining IPv6 lease for address %1 and lease type %2
A debug message issued when the server is attempting to obtain an IPv6
lease from the Cassandra database for the specified address.

% DHCPSRV_CQL_GET_CLIENTID obtaining IPv4 leases for client ID %1
A debug message issued when the server is attempting to obtain a set of
IPv4 leases from the Cassandra database for a client with the specified
client identification.

% DHCPSRV_CQL_GET_CLIENTID_HWADDR_SUBID obtaining IPv4 lease for client ID %1, hardware address %2 and subnet ID %3
A debug message issued when the server is attempting to obtain an IPv4
lease from the Cassandra database for a client with the specified
client ID, hardware address and subnet ID.

% DHCPSRV_CQL_GET_EXPIRED4 obtaining maximum %1 of expired IPv4 leases
A debug message issued when the server is attempting to obtain expired
IPv4 leases to reclaim them. The maximum number of leases to be retrieved
is logged in the message.

% DHCPSRV_CQL_GET_EXPIRED6 obtaining maximum %1 of expired IPv6 leases
A debug message issued when the server is attempting to obtain expired
IPv6 leases to reclaim them. The maximum number of leases to be retrieved
is logged in the message.

% DHCPSRV_CQL_GET_HWADDR obtaining IPv4 leases for hardware address %1
A debug message issued when the server is attempting to obtain a set of
IPv4 leases from the Cassandra database for a client with the specified
hardware address.

% DHCPSRV_CQL_GET_IAID_DUID obtaining IPv6 leases for IAID %1 and DUID %2 and lease type %3
A debug message issued when the server is attempting to obtain a set of IPv6
leases from the Cassandra database for a client with the specified IAID
(Identity Association ID) and DUID (DHCP Unique Identifier).

% DHCPSRV_CQL_GET_IAID_SUBID_DUID obtaining IPv6 leases for IAID %1, Subnet ID %2, DUID %3 and lease type %4
A debug message issued when the server is attempting to obtain an IPv6
lease from the Cassandra database for a client with the specified IAID
(Identity Association ID), Subnet ID and DUID (DHCP Unique Identifier).

% DHCPSRV_CQL_GET_SUBID_CLIENTID obtaining IPv4 lease for subnet ID %1 and client ID %2
A debug message issued when the server is attempting to obtain an IPv4
lease from the Cassandra database for a client with the specified
subnet ID and client ID.

% DHCPSRV_CQL_GET_SUBID_HWADDR obtaining IPv4 lease for subnet ID %1 and hardware address %2
A debug message issued when the server is attempting to obtain an IPv4
lease from the Cassandra database for a client with the specified
subnet ID and hardware address.

% DHCPSRV_CQL_GET_VERSION obtaining schema version information
A debug message issued when the server is about to obtain schema version
information from the Cassandra database.

% DHCPSRV_CQL_ROLLBACK rolling back Cassandra database
The code has issued a rollback call. For Cassandra, this is
a no-op.

% DHCPSRV_CQL_UPDATE_ADDR4 updating IPv4 lease for address %1
A debug message issued when the server is attempting to update IPv4
lease from the Cassandra database for the specified address.

% DHCPSRV_CQL_UPDATE_ADDR6 updating IPv6 lease for address %1
A debug message issued when the server is attempting to update IPv6
lease from the Cassandra database for the specified address.

262
263
264
% DHCPSRV_DHCP4O6_RECEIVED_BAD_PACKET received bad DHCPv4o6 packet: %1
A bad DHCPv4o6 packet was received.

265
266
% DHCPSRV_DHCP_DDNS_ERROR_EXCEPTION error handler for DHCP_DDNS IO generated an expected exception: %1
This is an error message that occurs when an attempt to send a request to
267
kea-dhcp-ddns fails there registered error handler threw an uncaught exception.
268
269
270
271
272
This is a programmatic error which should not occur. By convention, the error
handler should not propagate exceptions. Please report this error.

% DHCPSRV_DHCP_DDNS_HANDLER_NULL error handler for DHCP_DDNS IO is not set.
This is an error message that occurs when an attempt to send a request to
273
kea-dhcp-ddns fails and there is no registered error handler.  This is a
274
275
programmatic error which should never occur and should be reported.

276
277
% DHCPSRV_DHCP_DDNS_NCR_REJECTED NameChangeRequest rejected by the sender: %1, ncr: %2
This is an error message indicating that NameChangeSender used to deliver DDNS
278
update requests to kea-dhcp-ddns rejected the request.  This most likely cause
279
280
281
is the sender's queue has reached maximum capacity.  This would imply that
requests are being generated faster than they can be delivered.

282
% DHCPSRV_DHCP_DDNS_NCR_SENT NameChangeRequest sent to kea-dhcp-ddns: %1
283
A debug message issued when a NameChangeRequest has been successfully sent to
284
kea-dhcp-ddns.
285
286

% DHCPSRV_DHCP_DDNS_SENDER_STARTED NameChangeRequest sender has been started: %1
287
A informational message issued when a communications with kea-dhcp-ddns has
288
289
290
been successfully started.

% DHCPSRV_DHCP_DDNS_SENDER_STOPPED NameChangeRequest sender has been stopped.
291
A informational message issued when a communications with kea-dhcp-ddns has
292
been stopped. This normally occurs during reconfiguration and as part of normal
293
shutdown. It may occur if kea-dhcp-ddns communications breakdown.
294

295
296
% DHCPSRV_DHCP_DDNS_SUSPEND_UPDATES DHCP_DDNS updates are being suspended.
This is a warning message indicating the DHCP_DDNS updates have been turned
297
off.  This should only occur if IO errors communicating with kea-dhcp-ddns
298
have been experienced.  Any such errors should have preceding entries in the
299
log with details.  No further attempts to communicate with kea-dhcp-ddns will
300
be made without intervention.
301

Jeremy C. Reed's avatar
Jeremy C. Reed committed
302
% DHCPSRV_HOOK_LEASE4_RECOVER_SKIP DHCPv4 lease %1 was not recovered from the declined state because a callout set the skip status.
303
304
305
306
307
308
309
This debug message is printed when a callout installed on lease4_recover
hook point set the next step status to SKIP. For this particular hook point, this
indicates that the server should not recover the lease from declined state.
The server will leave the lease as it is, in the declined state. The
server will attempt to recover it the next time decline recovery procedure
takes place.

310
311
312
313
314
315
% DHCPSRV_HOOK_LEASE4_RENEW_SKIP DHCPv4 lease was not renewed because a callout set the skip flag.
This debug message is printed when a callout installed on lease4_renew
hook point set the skip flag. For this particular hook point, the setting
of the flag by a callout instructs the server to not renew a lease. The
server will use existing lease as it is, without extending its lifetime.

316
317
318
319
320
321
% DHCPSRV_HOOK_LEASE4_SELECT_SKIP Lease4 creation was skipped, because of callout skip flag.
This debug message is printed when a callout installed on lease4_select
hook point sets the skip flag. It means that the server was told that
no lease4 should be assigned. The server will not put that lease in its
database and the client will get a NAK packet.

322
% DHCPSRV_HOOK_LEASE6_EXTEND_SKIP DHCPv6 lease lifetime was not extended because a callout set the skip flag for message %1
Tomek Mrugalski's avatar
Tomek Mrugalski committed
323
This debug message is printed when a callout installed on lease6_renew
324
or the lease6_rebind hook point set the skip flag. For this particular hook
325
point, the setting of the flag by a callout instructs the server to not
326
extend the lifetime for a lease. If the client requested renewal of multiple
327
328
329
leases (by sending multiple IA options), the server will skip the renewal
of the one in question and will proceed with other renewals as usual.

330
331
332
333
334
335
336
337
% DHCPSRV_HOOK_LEASE6_RECOVER_SKIP DHCPv6 lease %1 was not recovered from declined state because a callout set the skip status.
This debug message is printed when a callout installed on lease6_recover
hook point set the next step status to SKIP. For this particular hook point, this
indicates that the server should not recover the lease from declined state.
The server will leave the lease as it is, in the declined state. The
server will attempt to recover it the next time decline recovery procedure
takes place.

338
339
% DHCPSRV_HOOK_LEASE6_SELECT_SKIP Lease6 (non-temporary) creation was skipped, because of callout skip flag.
This debug message is printed when a callout installed on lease6_select
340
341
342
hook point sets the skip flag. It means that the server was told that
no lease6 should be assigned. The server will not put that lease in its
database and the client will get a NoAddrsAvail for that IA_NA option.
343

344
345
% DHCPSRV_INVALID_ACCESS invalid database access string: %1
This is logged when an attempt has been made to parse a database access string
346
347
348
349
350
351
352
353
354
355
356
and the attempt ended in error.  The access string in question - which
should be of the form 'keyword=value keyword=value...' is included in
the message.

% DHCPSRV_MEMFILE_ADD_ADDR4 adding IPv4 lease with address %1
A debug message issued when the server is about to add an IPv4 lease
with the specified address to the memory file backend database.

% DHCPSRV_MEMFILE_ADD_ADDR6 adding IPv6 lease with address %1
A debug message issued when the server is about to add an IPv6 lease
with the specified address to the memory file backend database.
357

Shane Kerr's avatar
Shane Kerr committed
358
% DHCPSRV_MEMFILE_COMMIT committing to memory file database
359
360
361
The code has issued a commit call.  For the memory file database, this is
a no-op.

362
363
364
365
366
367
368
% DHCPSRV_MEMFILE_CONVERTING_LEASE_FILES running LFC now to convert lease files to the current schema: %1.%2
A warning message issued when the server has detected lease files that need
to be either upgraded or downgraded to match the server's schema, and that
the server is automatically running the LFC process to perform the conversion.
This should only occur the first time the server is launched following a Kea
installation upgrade (or downgrade).

369
% DHCPSRV_MEMFILE_DB opening memory file lease database: %1
370
371
372
373
374
375
376
377
378
379
This informational message is logged when a DHCP server (either V4 or
V6) is about to open a memory file lease database.  The parameters of
the connection including database name and username needed to access it
(but not the password if any) are logged.

% DHCPSRV_MEMFILE_DELETE_ADDR deleting lease for address %1
A debug message issued when the server is attempting to delete a lease
for the specified address from the memory file database for the specified
address.

380
% DHCPSRV_MEMFILE_DELETE_EXPIRED_RECLAIMED4 deleting reclaimed IPv4 leases that expired more than %1 seconds ago
381
382
A debug message issued when the server is removing reclaimed DHCPv4
leases which have expired longer than a specified period of time.
383
384
The argument is the amount of time Kea waits after a reclaimed
lease expires before considering its removal.
385

386
% DHCPSRV_MEMFILE_DELETE_EXPIRED_RECLAIMED6 deleting reclaimed IPv6 leases that expired more than %1 seconds ago
387
388
A debug message issued when the server is removing reclaimed DHCPv6
leases which have expired longer than a specified period of time.
389
390
The argument is the amount of time Kea waits after a reclaimed
lease expires before considering its removal.
391
392

% DHCPSRV_MEMFILE_DELETE_EXPIRED_RECLAIMED_START starting deletion of %1 expired-reclaimed leases
Jeremy C. Reed's avatar
Jeremy C. Reed committed
393
A debug message issued when the server has found expired-reclaimed
394
395
396
leases to be removed. The number of leases to be removed is logged
in the message.

397
398
399
400
% DHCPSRV_MEMFILE_GET_ADDR4 obtaining IPv4 lease for address %1
A debug message issued when the server is attempting to obtain an IPv4
lease from the memory file database for the specified address.

401
% DHCPSRV_MEMFILE_GET_ADDR6 obtaining IPv6 lease for address %1 and lease type %2
402
403
404
405
406
407
408
409
A debug message issued when the server is attempting to obtain an IPv6
lease from the memory file database for the specified address.

% DHCPSRV_MEMFILE_GET_CLIENTID obtaining IPv4 leases for client ID %1
A debug message issued when the server is attempting to obtain a set of
IPv4 leases from the memory file database for a client with the specified
client identification.

410
411
412
413
414
% DHCPSRV_MEMFILE_GET_CLIENTID_HWADDR_SUBID obtaining IPv4 lease for client ID %1, hardware address %2 and subnet ID %3
A debug message issued when the server is attempting to obtain an IPv4
lease from the memory file database for a client with the specified
client ID, hardware address and subnet ID.

415
% DHCPSRV_MEMFILE_GET_EXPIRED4 obtaining maximum %1 of expired IPv4 leases
416
417
418
419
A debug message issued when the server is attempting to obtain expired
IPv4 leases to reclaim them. The maximum number of leases to be retrieved
is logged in the message.

420
% DHCPSRV_MEMFILE_GET_EXPIRED6 obtaining maximum %1 of expired IPv6 leases
421
422
423
424
A debug message issued when the server is attempting to obtain expired
IPv6 leases to reclaim them. The maximum number of leases to be retrieved
is logged in the message.

425
426
427
428
429
% DHCPSRV_MEMFILE_GET_HWADDR obtaining IPv4 leases for hardware address %1
A debug message issued when the server is attempting to obtain a set of
IPv4 leases from the memory file database for a client with the specified
hardware address.

430
% DHCPSRV_MEMFILE_GET_IAID_DUID obtaining IPv6 leases for IAID %1 and DUID %2 and lease type %3
431
432
433
A debug message issued when the server is attempting to obtain a set of IPv6
leases from the memory file database for a client with the specified IAID
(Identity Association ID) and DUID (DHCP Unique Identifier).
434

435
% DHCPSRV_MEMFILE_GET_IAID_SUBID_DUID obtaining IPv6 leases for IAID %1, Subnet ID %2, DUID %3 and lease type %4
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
A debug message issued when the server is attempting to obtain an IPv6
lease from the memory file database for a client with the specified IAID
(Identity Association ID), Subnet ID and DUID (DHCP Unique Identifier).

% DHCPSRV_MEMFILE_GET_SUBID_CLIENTID obtaining IPv4 lease for subnet ID %1 and client ID %2
A debug message issued when the server is attempting to obtain an IPv4
lease from the memory file database for a client with the specified
subnet ID and client ID.

% DHCPSRV_MEMFILE_GET_SUBID_HWADDR obtaining IPv4 lease for subnet ID %1 and hardware address %2
A debug message issued when the server is attempting to obtain an IPv4
lease from the memory file database for a client with the specified
subnet ID and hardware address.

% DHCPSRV_MEMFILE_GET_VERSION obtaining schema version information
A debug message issued when the server is about to obtain schema version
information from the memory file database.

454
455
% DHCPSRV_MEMFILE_LEASE_FILE_LOAD loading leases from file %1
An info message issued when the server is about to start reading DHCP leases
456
457
458
from the lease file. All leases currently held in the memory will be
replaced by those read from the file.

459
460
% DHCPSRV_MEMFILE_LEASE_LOAD loading lease %1
A debug message issued when DHCP lease is being loaded from the file to memory.
461

462
463
464
465
466
467
% DHCPSRV_MEMFILE_LEASE_LOAD_ROW_ERROR discarding row %1, error: %2
An error message issued the the DHCP lease being loaded from the given row of
the lease file fails. The log message should contain the specific reason the
row was discarded. The server will continue loading the remaining data.
This may indicate a corrupt lease file.

468
469
470
471
% DHCPSRV_MEMFILE_LFC_EXECUTE executing Lease File Cleanup using: %1
An informational message issued when the Memfile lease database backend
starts a new process to perform Lease File Cleanup.

472
473
474
475
476
477
478
% DHCPSRV_MEMFILE_LFC_LEASE_FILE_RENAME_FAIL failed to rename the current lease file %1 to %2, reason: %3
An error message logged when the Memfile lease database backend fails to
move the current lease file to a new file on which the cleanup should
be performed. This effectively means that the lease file cleanup
will not take place.

% DHCPSRV_MEMFILE_LFC_LEASE_FILE_REOPEN_FAIL failed to reopen lease file %1 after preparing input file for lease file cleanup, reason: %2, new leases will not be persisted!
479
An error message logged when the Memfile lease database backend
480
481
482
failed to re-open or re-create the lease file after renaming the
lease file for lease file cleanup. The server will continue to
operate but leases will not be persisted to disk.
483

484
% DHCPSRV_MEMFILE_LFC_SETUP setting up the Lease File Cleanup interval to %1 sec
485
486
487
An informational message logged when the Memfile lease database backend
configures the LFC to be executed periodically. The argument holds the
interval in seconds in which the LFC will be executed.
488

489
% DHCPSRV_MEMFILE_LFC_SPAWN_FAIL lease file cleanup failed to run because kea-lfc process couldn't be spawned
490
This error message is logged when the Kea server fails to run kea-lfc,
491
492
493
494
495
the program that cleans up the lease file. The server will try again the
next time a lease file cleanup is scheduled. Although this message should
not appear and the reason why it did investigated, the occasional failure
to start the lease file cleanup will not impact operations. Should the
failure persist however, the size of the lease file will increase without bound.
496

497
% DHCPSRV_MEMFILE_LFC_START starting Lease File Cleanup
498
499
An informational message issued when the Memfile lease database backend
starts the periodic Lease File Cleanup.
500

501
% DHCPSRV_MEMFILE_LFC_UNREGISTER_TIMER_FAILED failed to unregister timer 'memfile-lfc': %1
502
503
504
This debug message is logged when Memfile backend fails to unregister
timer used for lease file cleanup scheduling. There are several reasons
why this could occur, although the most likely cause is that the system
505
is being shut down and some other component has unregistered the timer.
506
The message includes the reason for this error.
507

508
% DHCPSRV_MEMFILE_NEEDS_DOWNGRADING version of lease file: %1 schema is later than version %2
509
510
511
512
A warning message issued when the schema of the lease file loaded by the server
is newer than the memfile schema of the server.  The server converts the lease
data from newer schemas to its schema as it is read, therefore the lease
information in use by the server will be correct. Note though, that any data
513
stored in newer schema fields will be dropped.  What remains is for the
514
515
file itself to be rewritten using the current schema.

516
% DHCPSRV_MEMFILE_NEEDS_UPGRADING version of lease file: %1 schema is earlier than version %2
517
A warning message issued when the schema of the lease file loaded by the server
518
519
520
521
pre-dates the memfile schema of the server.  Note that the server converts the
lease data from older schemas to the current schema as it is read, therefore
the lease information in use by the server will be correct.  What remains is
for the file itself to be rewritten using the current schema.
522

523
524
525
526
527
528
529
% DHCPSRV_MEMFILE_NO_STORAGE running in non-persistent mode, leases will be lost after restart
A warning message issued when writes of leases to disk have been disabled
in the configuration. This mode is useful for some kinds of performance
testing but should not be enabled in normal circumstances. Non-persistence
mode is enabled when 'persist4=no persist6=no' parameters are specified
in the database access string.

Tomek Mrugalski's avatar
Tomek Mrugalski committed
530
% DHCPSRV_MEMFILE_READ_HWADDR_FAIL failed to read hardware address from lease file: %1
531
532
533
534
535
A warning message issued when read attempt of the hardware address stored in
a disk file failed. The parameter should provide the exact nature of the failure.
The database read will continue, but that particular lease will no longer
have hardware address associated with it.

536
537
538
539
% DHCPSRV_MEMFILE_ROLLBACK rolling back memory file database
The code has issued a rollback call.  For the memory file database, this is
a no-op.

540
541
542
543
544
545
546
% DHCPSRV_MEMFILE_UPDATE_ADDR4 updating IPv4 lease for address %1
A debug message issued when the server is attempting to update IPv4
lease from the memory file database for the specified address.

% DHCPSRV_MEMFILE_UPDATE_ADDR6 updating IPv6 lease for address %1
A debug message issued when the server is attempting to update IPv6
lease from the memory file database for the specified address.
547

Jeremy C. Reed's avatar
Jeremy C. Reed committed
548
% DHCPSRV_MULTIPLE_RAW_SOCKETS_PER_IFACE current configuration will result in opening multiple broadcast capable sockets on some interfaces and some DHCP messages may be duplicated
549
A warning message issued when the current configuration indicates that multiple
Jeremy C. Reed's avatar
Jeremy C. Reed committed
550
sockets, capable of receiving broadcast traffic, will be opened on some of the
551
552
553
554
interfaces. It must be noted that this may lead to receiving and processing
the same DHCP message multiple times, as it will be received by each socket
individually.

555
556
557
558
% DHCPSRV_MYSQL_ADD_ADDR4 adding IPv4 lease with address %1
A debug message issued when the server is about to add an IPv4 lease
with the specified address to the MySQL backend database.

559
% DHCPSRV_MYSQL_ADD_ADDR6 adding IPv6 lease with address %1, lease type %2
560
561
562
A debug message issued when the server is about to add an IPv6 lease
with the specified address to the MySQL backend database.

Jeremy C. Reed's avatar
Jeremy C. Reed committed
563
% DHCPSRV_MYSQL_COMMIT committing to MySQL database
564
565
The code has issued a commit call.  All outstanding transactions will be
committed to the database.  Note that depending on the MySQL settings,
566
the committal may not include a write to disk.
567

568
% DHCPSRV_MYSQL_DB opening MySQL lease database: %1
569
570
571
572
This informational message is logged when a DHCP server (either V4 or
V6) is about to open a MySQL lease database.  The parameters of the
connection including database name and username needed to access it
(but not the password if any) are logged.
573

574
575
576
577
578
% DHCPSRV_MYSQL_DELETED_EXPIRED_RECLAIMED deleted %1 reclaimed leases from the database
A debug message issued when the server has removed a number of reclaimed
leases from the database. The number of removed leases is included in the
message.

579
% DHCPSRV_MYSQL_DELETE_ADDR deleting lease for address %1
580
581
A debug message issued when the server is attempting to delete a lease for
the specified address from the MySQL database for the specified address.
582

583
% DHCPSRV_MYSQL_DELETE_EXPIRED_RECLAIMED4 deleting reclaimed IPv4 leases that expired more than %1 seconds ago
584
585
A debug message issued when the server is removing reclaimed DHCPv4
leases which have expired longer than a specified period of time.
586
587
The argument is the amount of time Kea waits after a reclaimed
lease expires before considering its removal.
588

589
% DHCPSRV_MYSQL_DELETE_EXPIRED_RECLAIMED6 deleting reclaimed IPv6 leases that expired more than %1 seconds ago
590
591
A debug message issued when the server is removing reclaimed DHCPv6
leases which have expired longer than a specified period of time.
592
593
The argument is the amount of time Kea waits after a reclaimed
lease expires before considering its removal.
594

595
596
597
598
599
% DHCPSRV_MYSQL_FATAL_ERROR Unrecoverable MySQL error occurred: %1 for <%2>, reason: %3 (error code: %4). Server exiting now!
An error message indicating that communication with the MySQL database server
has been lost.  When this occurs the server exits immediately with a non-zero
exit code.  This is most likely due to a network issue.

600
% DHCPSRV_MYSQL_GET_ADDR4 obtaining IPv4 lease for address %1
601
602
A debug message issued when the server is attempting to obtain an IPv4
lease from the MySQL database for the specified address.
603

604
% DHCPSRV_MYSQL_GET_ADDR6 obtaining IPv6 lease for address %1, lease type %2
605
606
A debug message issued when the server is attempting to obtain an IPv6
lease from the MySQL database for the specified address.
607
608

% DHCPSRV_MYSQL_GET_CLIENTID obtaining IPv4 leases for client ID %1
609
610
611
A debug message issued when the server is attempting to obtain a set
of IPv4 leases from the MySQL database for a client with the specified
client identification.
612

613
% DHCPSRV_MYSQL_GET_EXPIRED4 obtaining maximum %1 of expired IPv4 leases
614
615
616
617
A debug message issued when the server is attempting to obtain expired
IPv4 leases to reclaim them. The maximum number of leases to be retrieved
is logged in the message.

618
% DHCPSRV_MYSQL_GET_EXPIRED6 obtaining maximum %1 of expired IPv6 leases
619
620
621
622
A debug message issued when the server is attempting to obtain expired
IPv6 leases to reclaim them. The maximum number of leases to be retrieved
is logged in the message.

623
% DHCPSRV_MYSQL_GET_HWADDR obtaining IPv4 leases for hardware address %1
624
625
626
A debug message issued when the server is attempting to obtain a set
of IPv4 leases from the MySQL database for a client with the specified
hardware address.
627

628
% DHCPSRV_MYSQL_GET_IAID_DUID obtaining IPv6 leases for IAID %1, DUID %2, lease type %3
629
630
631
A debug message issued when the server is attempting to obtain a set of IPv6
leases from the MySQL database for a client with the specified IAID (Identity
Association ID) and DUID (DHCP Unique Identifier).
632

633
% DHCPSRV_MYSQL_GET_IAID_SUBID_DUID obtaining IPv6 leases for IAID %1, Subnet ID %2, DUID %3, lease type %4
634
635
636
A debug message issued when the server is attempting to obtain an IPv6
lease from the MySQL database for a client with the specified IAID
(Identity Association ID), Subnet ID and DUID (DHCP Unique Identifier).
637
638
639

% DHCPSRV_MYSQL_GET_SUBID_CLIENTID obtaining IPv4 lease for subnet ID %1 and client ID %2
A debug message issued when the server is attempting to obtain an IPv4
640
641
lease from the MySQL database for a client with the specified subnet ID
and client ID.
642
643
644

% DHCPSRV_MYSQL_GET_SUBID_HWADDR obtaining IPv4 lease for subnet ID %1 and hardware address %2
A debug message issued when the server is attempting to obtain an IPv4
645
646
lease from the MySQL database for a client with the specified subnet ID
and hardware address.
647
648
649

% DHCPSRV_MYSQL_GET_VERSION obtaining schema version information
A debug message issued when the server is about to obtain schema version
650
information from the MySQL database.
651

652
653
654
655
656
657
% DHCPSRV_MYSQL_HOST_DB opening MySQL hosts database: %1
This informational message is logged when a DHCP server (either V4 or
V6) is about to open a MySQL hosts database.  The parameters of the
connection including database name and username needed to access it
(but not the password if any) are logged.

658
% DHCPSRV_MYSQL_HOST_DB_GET_VERSION obtaining schema version information for the MySQL hosts database
659
660
661
A debug message issued when the server is about to obtain schema version
information from the MySQL hosts database.

662
% DHCPSRV_MYSQL_HOST_DB_READONLY MySQL host database opened for read access only
663
This informational message is issued when the user has configured the MySQL
664
665
666
667
database in read-only mode. Kea will not be able to insert or modify
host reservations but will be able to retrieve existing ones and
assign them to the clients communicating with the server.

668
669
670
671
% DHCPSRV_MYSQL_ROLLBACK rolling back MySQL database
The code has issued a rollback call.  All outstanding transaction will
be rolled back and not committed to the database.

672
673
674
675
676
677
678
679
680
% DHCPSRV_MYSQL_START_TRANSACTION starting new MySQL transaction
A debug message issued whena new MySQL transaction is being started.
This message is typically not issued when inserting data into a
single table because the server doesn't explicitly start
transactions in this case. This message is issued when data is
inserted into multiple tables with multiple INSERT statements
and there may be a need to rollback the whole transaction if
any of these INSERT statements fail.

681
% DHCPSRV_MYSQL_UPDATE_ADDR4 updating IPv4 lease for address %1
682
683
A debug message issued when the server is attempting to update IPv4
lease from the MySQL database for the specified address.
684

685
% DHCPSRV_MYSQL_UPDATE_ADDR6 updating IPv6 lease for address %1, lease type %2
686
687
A debug message issued when the server is attempting to update IPv6
lease from the MySQL database for the specified address.
688

689
690
691
692
693
694
% DHCPSRV_NOTYPE_DB no 'type' keyword to determine database backend: %1
This is an error message, logged when an attempt has been made to access
a database backend, but where no 'type' keyword has been included in
the access string.  The access string (less any passwords) is included
in the message.

695
696
697
698
699
% DHCPSRV_NO_SOCKETS_OPEN no interface configured to listen to DHCP traffic
This warning message is issued when the current server configuration specifies
no interfaces that the server should listen on, or when the specified interfaces are not
configured to receive the traffic.

700
701
702
703
% DHCPSRV_OPEN_SOCKET_FAIL failed to open socket: %1
A warning message issued when IfaceMgr fails to open and bind a socket.
The reason for the failure is appended as an argument of the log message.

704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
% DHCPSRV_PGSQL_ADD_ADDR4 adding IPv4 lease with address %1
A debug message issued when the server is about to add an IPv4 lease
with the specified address to the PostgreSQL backend database.

% DHCPSRV_PGSQL_ADD_ADDR6 adding IPv6 lease with address %1
A debug message issued when the server is about to add an IPv6 lease
with the specified address to the PostgreSQL backend database.

% DHCPSRV_PGSQL_COMMIT committing to MySQL database
The code has issued a commit call.  All outstanding transactions will be
committed to the database.  Note that depending on the PostgreSQL settings,
the committal may not include a write to disk.

% DHCPSRV_PGSQL_DB opening PostgreSQL lease database: %1
This informational message is logged when a DHCP server (either V4 or
V6) is about to open a PostgreSQL lease database.  The parameters of the
connection including database name and username needed to access it
(but not the password if any) are logged.

723
% DHCPSRV_PGSQL_DEALLOC_ERROR An error occurred deallocating SQL statements while closing the PostgreSQL lease database: %1
724
725
726
727
728
729
This is an error message issued when a DHCP server (either V4 or V6) experienced
and error freeing database SQL resources as part of closing its connection to
the Postgresql database.  The connection is closed as part of normal server
shutdown.  This error is most likely a programmatic issue that is highly
unlikely to occur or negatively impact server operation.

730
731
732
733
% DHCPSRV_PGSQL_DELETE_ADDR deleting lease for address %1
A debug message issued when the server is attempting to delete a lease for
the specified address from the PostgreSQL database for the specified address.

734
735
736
737
738
739
740
741
742
743
744
745
% DHCPSRV_PGSQL_DELETE_EXPIRED_RECLAIMED4 deleting reclaimed IPv4 leases that expired more than %1 seconds ago
A debug message issued when the server is removing reclaimed DHCPv4
leases which have expired longer than a specified period of time.
The argument is the amount of time Kea waits after a reclaimed
lease expires before considering its removal.

% DHCPSRV_PGSQL_DELETE_EXPIRED_RECLAIMED6 deleting reclaimed IPv6 leases that expired more than %1 seconds ago
A debug message issued when the server is removing reclaimed DHCPv6
leases which have expired longer than a specified period of time.
The argument is the amount of time Kea waits after a reclaimed
lease expires before considering its removal.

746
% DHCPSRV_PGSQL_FATAL_ERROR Unrecoverable PostgreSQL error occurred: Statement: <%1>, reason: %2 (error code: %3). Server exiting now!
747
748
749
An error message indicating that communication with the MySQL database server
has been lost.  When this occurs the server exits immediately with a non-zero
exit code.  This is most likely due to a network issue.
750
751
752
753
754
755
756
757
758
759
760
761
762
763

% DHCPSRV_PGSQL_GET_ADDR4 obtaining IPv4 lease for address %1
A debug message issued when the server is attempting to obtain an IPv4
lease from the PostgreSQL database for the specified address.

% DHCPSRV_PGSQL_GET_ADDR6 obtaining IPv6 lease for address %1 (lease type %2)
A debug message issued when the server is attempting to obtain an IPv6
lease from the PostgreSQL database for the specified address.

% DHCPSRV_PGSQL_GET_CLIENTID obtaining IPv4 leases for client ID %1
A debug message issued when the server is attempting to obtain a set
of IPv4 leases from the PostgreSQL database for a client with the specified
client identification.

764
765
766
767
768
769
770
771
772
773
% DHCPSRV_PGSQL_GET_EXPIRED4 obtaining maximum %1 of expired IPv4 leases
A debug message issued when the server is attempting to obtain expired
IPv4 leases to reclaim them. The maximum number of leases to be retrieved
is logged in the message.

% DHCPSRV_PGSQL_GET_EXPIRED6 obtaining maximum %1 of expired IPv6 leases
A debug message issued when the server is attempting to obtain expired
IPv6 leases to reclaim them. The maximum number of leases to be retrieved
is logged in the message.

774
775
776
777
778
779
% DHCPSRV_PGSQL_GET_HWADDR obtaining IPv4 leases for hardware address %1
A debug message issued when the server is attempting to obtain a set
of IPv4 leases from the PostgreSQL database for a client with the specified
hardware address.

% DHCPSRV_PGSQL_GET_IAID_DUID obtaining IPv4 leases for IAID %1 and DUID %2, lease type %3
780
781
A debug message issued when the server is attempting to obtain a set of IPv6
leases from the PostgreSQL database for a client with the specified IAID
782
783
(Identity Association ID) and DUID (DHCP Unique Identifier).

784
% DHCPSRV_PGSQL_GET_IAID_SUBID_DUID obtaining IPv4 leases for IAID %1, Subnet ID %2, DUID %3, and lease type %4
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
A debug message issued when the server is attempting to obtain an IPv6
lease from the PostgreSQL database for a client with the specified IAID
(Identity Association ID), Subnet ID and DUID (DHCP Unique Identifier).

% DHCPSRV_PGSQL_GET_SUBID_CLIENTID obtaining IPv4 lease for subnet ID %1 and client ID %2
A debug message issued when the server is attempting to obtain an IPv4
lease from the PostgreSQL database for a client with the specified subnet ID
and client ID.

% DHCPSRV_PGSQL_GET_SUBID_HWADDR obtaining IPv4 lease for subnet ID %1 and hardware address %2
A debug message issued when the server is attempting to obtain an IPv4
lease from the PostgreSQL database for a client with the specified subnet ID
and hardware address.

% DHCPSRV_PGSQL_GET_VERSION obtaining schema version information
A debug message issued when the server is about to obtain schema version
information from the PostgreSQL database.

803
804
805
806
807
808
% DHCPSRV_PGSQL_HOST_DB opening PostgreSQL hosts database: %1
This informational message is logged when a DHCP server (either V4 or
V6) is about to open a PostgreSQL hosts database.  The parameters of the
connection including database name and username needed to access it
(but not the password if any) are logged.

809
810
811
812
% DHCPSRV_PGSQL_HOST_DB_GET_VERSION obtaining schema version information for the PostgreSQL hosts database
A debug message issued when the server is about to obtain schema version
information from the PostgreSQL hosts database.

813
% DHCPSRV_PGSQL_HOST_DB_READONLY PostgreSQL host database opened for read access only
814
815
816
817
818
This informational message is issued when the user has configured the PostgreSQL
database in read-only mode. Kea will not be able to insert or modify
host reservations but will be able to retrieve existing ones and
assign them to the clients communicating with the server.

819
820
821
822
% DHCPSRV_PGSQL_ROLLBACK rolling back PostgreSQL database
The code has issued a rollback call.  All outstanding transaction will
be rolled back and not committed to the database.

823
824
825
826
827
828
829
830
831
% DHCPSRV_PGSQL_START_TRANSACTION starting a new PostgreSQL transaction
A debug message issued when a new PostgreSQL transaction is being started.
This message is typically not issued when inserting data into a
single table because the server doesn't explicitly start
transactions in this case. This message is issued when data is
inserted into multiple tables with multiple INSERT statements
and there may be a need to rollback the whole transaction if
any of these INSERT statements fail.

832
833
834
835
836
837
838
839
% DHCPSRV_PGSQL_UPDATE_ADDR4 updating IPv4 lease for address %1
A debug message issued when the server is attempting to update IPv4
lease from the PostgreSQL database for the specified address.

% DHCPSRV_PGSQL_UPDATE_ADDR6 updating IPv6 lease for address %1
A debug message issued when the server is attempting to update IPv6
lease from the PostgreSQL database for the specified address.

840
% DHCPSRV_QUEUE_NCR %1: name change request to %2 DNS entry queued: %3
841
A debug message which is logged when the NameChangeRequest to add or remove
842
843
844
845
a DNS entries for a particular lease has been queued. The first argument
includes the client identification information. The second argument
indicates whether the DNS entry is to be added or removed. The third
argument carries the details of the NameChangeRequest.
846

847
% DHCPSRV_QUEUE_NCR_FAILED %1: queueing %2 name change request failed for lease %3: %4
848
This error message is logged when sending a name change request
849
850
851
852
853
854
855
856
857
858
859
to DHCP DDNS failed. The first argument includes the client identification
information. The second argument indicates whether the DNS entry is to be
added or removed. The third argument specifies the leased address. The
last argument provides the reason for failure.

% DHCPSRV_QUEUE_NCR_SKIP %1: skip queueing name change request for lease: %2
This debug message is issued when the server decides to not queue the name
change request because the lease doesn't include the FQDN, the forward and
reverse update is disabled for this lease or the DNS updates are disabled
in the configuration. The first argument includes the client identification
information. The second argument includes the leased address.
860

861
862
863
864
865
% DHCPSRV_TIMERMGR_CALLBACK_FAILED running handler for timer %1 caused exception: %2
This error message is emitted when the timer elapsed and the
operation associated with this timer has thrown an exception.
The timer name and the reason for exception is logged.

866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
% DHCPSRV_TIMERMGR_REGISTER_TIMER registering timer: %1, using interval: %2 ms
A debug message issued when the new interval timer is registered in
the Timer Manager. This timer will have a callback function
associated with it, and this function will be executed according
to the interval specified. The unique name of the timer and the
interval at which the callback function will be executed is
included in the message.

% DHCPSRV_TIMERMGR_RUN_TIMER_OPERATION running operation for timer: %1
A debug message issued when the Timer Manager is about to
run a periodic operation associated with the given timer.
An example of such operation is a periodic cleanup of
expired leases. The name of the timer is included in the
message.

881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
% DHCPSRV_TIMERMGR_SOCKET_CLEAR_FAILED clearing watch socket for timer %1 failed: %2
An error message indicating that the specified timer elapsed,
the operation associated with the timer was executed but the
server was unable to signal this to the worker thread responsible
for dispatching timers. The thread will continue but it will
not be able to dispatch any operations for this timer. The
server reconfiguration or restart may solve the problem
but the situation may repeat.

% DHCPSRV_TIMERMGR_SOCKET_MARK_FAILED marking watch socket for timer %1 failed: %2
An error message indicating that the specified timer elapsed,
but the server was unable to flag that the handler function
should be executed for this timer. The callback will not
be executed this time and most likely the subsequent attempts
will not be successful too. This error is highly unlikely.
Jeremy C. Reed's avatar
Jeremy C. Reed committed
896
The name of the timer and the reason for failure is included
897
898
in the message.

899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
% DHCPSRV_TIMERMGR_START_THREAD starting thread for timers
A debug message issued when the Timer Manager is starting a
worker thread to run started timers. The worker thread is
typically started right after all timers have been registered
and runs until timers need to be reconfigured, e.g. their
interval is changed, new timers are registered or existing
timers are unregistered.

% DHCPSRV_TIMERMGR_START_TIMER starting timer: %1
A debug message issued when the registered interval timer is
being started. If this operation is successful the timer will
periodically execute the operation associated with it. The
name of the started timer is included in the message.

% DHCPSRV_TIMERMGR_STOP_THREAD stopping thread for timers
A debug message issued when the Timer Manager is stopping
the worker thread which executes interval timers. When the
thread is stopped no timers will be executed. The thread is
typically stopped at the server reconfiguration or when the
server shuts down.

% DHCPSRV_TIMERMGR_STOP_TIMER stopping timer: %1
A debug message issued when the registered interval timer is
being stopped. The timer remains registered and can be restarted
if necessary. The name of the timer is included in the message.

% DHCPSRV_TIMERMGR_UNREGISTER_ALL_TIMERS unregistering all timers
A debug message issued when all registered interval timers are
being unregistered from the Timer Manager.

% DHCPSRV_TIMERMGR_UNREGISTER_TIMER unregistering timer: %1
A debug message issued when one of the registered interval timers
is unregistered from the Timer Manager. The name of the timer is
included in the message.

934
935
936
937
938
939
940
% DHCPSRV_UNEXPECTED_NAME database access parameters passed through '%1', expected 'lease-database'
The parameters for access the lease database were passed to the server through
the named configuration parameter, but the code was expecting them to be
passed via the parameter named "lease-database".  If the database opens
successfully, there is no impact on server operation.  However, as this does
indicate an error in the source code, please submit a bug report.

941
% DHCPSRV_UNKNOWN_DB unknown database type: %1
942
943
The database access string specified a database type (given in the
message) that is unknown to the software.  This is a configuration error.