ChangeLog 165 KB
Newer Older
1
bind10-1.0.0-beta1 released on April 4, 2013
Jeremy C. Reed's avatar
Jeremy C. Reed committed
2

3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
598.	[func]*		jinmei
	The separate "static" data source is now deprecated as it can be
	served in the more generic "MasterFiles" type of data source.
	This means existing configuration may not work after an update.
	If "config show data_sources/classes/CH[0]" on bindctl contains a
	"static" type of data source, you'll need to update it as follows:
	> config set data_sources/classes/CH[0]/type MasterFiles
	> config set data_sources/classes/CH[0]/params {"BIND": =>
	  "<the value of current data_sources/classes/CH[0]/params>"}
	> config set data_sources/classes/CH[0]/cache-enable true
	> config commit
	(Same for CH[1], CH[2], IN[0], etc, if applicable, although it
	should be very unlikely in practice.  Also note: '=>' above
	indicates the next line is actually part of the command.  Do
	not type in this "arrow").
	(Part of Trac #2833, git 0363b4187fe3c1a148ad424af39e12846610d2d7)

20 21 22 23 24 25
597.	[func]		tmark
	b10-dhcp6: Added unit tests for handling requests when no
	IPv6 subnets are configured/defined. Testing these conditions
	was overlooked during implementation of Trac #2719.
	(Trac #2721, git ce7f53b2de60e2411483b4aa31c714763a36da64)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
26 27 28 29 30 31 32 33 34
596.	[bug]		jinmei
	Added special handling for the case where b10-auth receives a
	NOTIFY message, but zonemgr isn't running. Previously this was
	logged as a communications problem at the ERROR level, resulting
	in increasing noise when zonemgr is intentionally stopped. Other
	than the log level there is no change in externally visible
	behavior.
	(Trac #2562, git 119eed9938b17cbad3a74c823aa9eddb7cd337c2)

35
595.	[bug]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
36 37
	All DHCP components now gracefully refuse to handle too short
	DUIDs and client-id.
38 39
	(Trac #2723, git a043d8ecda6aff57922fe98a33c7c3f6155d5d64)

40 41 42 43 44 45 46 47 48
594.	[func]		muks, pselkirk
	libdns++: the NSEC, DS, DLV, and AFSDB Rdata classes now use the
	generic lexer in constructors from text.  This means that the name
	fields in such RRs in a zone file can now be non-absolute (the
	origin name in that context will be used), e.g., when loaded by
	b10-loadzone.
	(Trac #2386, git dc0f34afb1eccc574421a802557198e6cd2363fa)
	(Trac #2391, git 1450d8d486cba3bee8be46e8001d66898edd370c)

49 50 51 52 53 54
593.	[func]		jelte
	Address + port output and logs is now consistent according to our
	coding guidelines, e.g. <address>:<port> in the case of IPv4, and
	[<address>]:<port> in the case of IPv6, instead of <address>#<port>
	(Trac #1086, git bcefe1e95cdd61ee4a09b20522c3c56b315a1acc)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
55 56 57 58 59 60 61 62 63
592.	[bug]		jinmei
	b10-auth and zonemgr now handle some uncommon NOTIFY messages more
	gracefully: auth immediately returns a NOTAUTH response if the
	server does not have authority for the zone (the behavior
	compatible with BIND 9) without bothering zonemgr; zonemgr now
	simply skips retransfer if the specified zone is not in its
	secondary zone list, instead of producing noisy error logs.
	(Trac #1938, git 89d7de8e2f809aef2184b450e7dee1bfec98ad14)

Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
64 65
591.	[func]		vorner
	Ported the remaining tests from the old shell/perl based system to
66 67
	lettuce. Make target `systest' is now gone. Currently, the lettuce
	tests are in git only, not part of the release tarball.
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
68 69
	(Trac #2624, git df1c5d5232a2ab551cd98b77ae388ad568a683ad)

Thomas Markwalder's avatar
Thomas Markwalder committed
70 71 72 73
590.	[bug]		tmark
	Modified "include" statements in DHCP MySQL lease manager code to
	fix build problems if MySQL is installed in a non-standard location.
	(Trac #2825, git 4813e06cf4e0a9d9f453890557b639715e081eca)
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
74

75 76 77 78 79
589.	[bug]		jelte
	b10-cmdctl now automatically re-reads the user accounts file when
	it is updated.
	(Trac #2710, git 16e8be506f32de668699e6954f5de60ca9d14ddf)

80
588.	[bug]*		jreed
81 82
	b10-xfrout: Log message id XFROUT_QUERY_QUOTA_EXCCEEDED
	changed to XFROUT_QUERY_QUOTA_EXCEEDED.
83
	(git be41be890f1349ae4c870a887f7acd99ba1eaac5)
84

85 86 87 88 89 90 91 92 93
587.	[bug]		jelte
	When used from python, the dynamic datasource factory now
	explicitely loads the logging messages dictionary, so that correct
	logging messages does not depend on incidental earlier import
	statements. Also, the sqlite3-specific log messages have been moved
	from the general datasource library to the sqlite3 datasource
	(which also explicitely loads its messages).
	(Trac 2746, git 1c004d95a8b715500af448683e4a07e9b66ea926)

94 95 96 97 98 99 100 101 102 103 104
586.	[func]		marcin
	libdhcp++: Removed unnecesary calls to the function which
	validates option definitions used to create instances of options
	being decoded in the received packets. Eliminating these calls
	lowered the CPU utilization by the server by approximately 10%.
	Also, added the composite search indexes on the container used to
	store DHCP leases by Memfile backend. This resulted in the
	significant performance rise when using this backend to store
	leases.
	(Trac #2701, git b96a30b26a045cfaa8ad579b0a8bf84f5ed4e73f)

105 106 107 108 109 110 111 112 113 114
585.	[func]		jinmei, muks
	The zone data loader now accepts RRs in any order during load.
	Before it used to reject adding non-consecutive RRsets. It
	expected records for a single owner name and its type to be
	grouped together. These restrictions are now removed.  It now also
	suppresses any duplicate RRs in the zone file when loading them
	into memory.
	(Trac #2440, git 232307060189c47285121f696d4efb206f632432)
	(Trac #2441, git 0860ae366d73314446d4886a093f4e86e94863d4)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
115 116 117 118 119 120 121 122 123
584.	[bug]		jinmei
	Fixed build failure with Boost 1.53 (and probably higher) in the
	internal utility library.  Note that with -Werror it may still
	fail, but it's due to a Boost bug that is reportedly fixed in their
	development trunk.  See https://svn.boost.org/trac/boost/ticket/8080
	Until the fix is available in a released Boost version you may need
	to specify the --without-werror configure option to build BIND 10.
	(Trac #2764, git ca1da8aa5de24358d7d4e7e9a4625347457118cf)

124 125 126 127 128 129 130 131 132 133 134
583.	[func]*		jelte
	b10-cmdctl-usermgr has been updated and its options and arguments
	have changed; it now defaults to the same accounts file as
	b10-cmdctl defaults to. It can now be used to remove users from the
	accounts file as well, and it now accepts command-line arguments to
	specify the username and password to add or remove, in which case
	it will not prompt for them.
	Note that using a password on the command line is not recommended,
	as this can be viewed by other users.
	(Trac #2713, git 9925af3b3f4daa47ba8c2eb66f556b01ed6f0502)

Naoki Kambe's avatar
Naoki Kambe committed
135 136 137 138 139 140 141
582.	[func]		naokikambe
	New statistics items related unixdomain sockets added into Xfrout :
	open, openfail, close, bindfail, acceptfail, accept, senderr, and
	recverr.  Their values can be obtained by invoking "Stats show Xfrout"
	via bindctl while Xfrout is running.
	(Trac #2225, git 6df60554683165adacc2d1c3d29aa42a0c9141a1)

142
581.	[func]*		y-aharen
Yoshitaka Aharen's avatar
Yoshitaka Aharen committed
143 144 145 146 147
	Added statistics items in b10-auth based on
	http://bind10.isc.org/wiki/StatisticsItems. Qtype counters are
	dropped as it requires further spec design discussion.
	(Trac #2154, Trac #2155,
	             git 61d7c3959eb991b22bc1c0ef8f4ecb96b65d9325)
148
	(Trac #2157, git e653adac032f871cbd66cd500c37407a56d14589)
Yoshitaka Aharen's avatar
Yoshitaka Aharen committed
149

150 151
bind10-1.0.0-rc released on February 14, 2013

152 153 154 155 156 157 158
580.	[func]*		muks
	There is no longer a default user account. The old default account
	with username 'root' has been removed. In a fresh installation of
	BIND 10, the administrator has to configure a user account using
	the b10-cmdctl-usermgr program.
	(Trac #2641, git 54e8f4061f92c2f9e5b8564240937515efa6d934)

159 160 161 162 163 164 165 166 167
579.	[bug]		jinmei
	libdatasrc/b10-auth: corrected some corner cases in query handling
	of in-memory data source that led to the following invalid/odd
	responses from b10-auth:
	- duplicate RRs in answer and additional for type ANY query
	- incorrect NSEC for no error, no data (NXRRSET) response that
	  matches a wildcard
	(Trac #2585, git abe78fae4ba3aca5eb01806dd4e05607b1241745)

168 169
578.	[bug]		jinmei
	b10-auth now returns closest encloser NSEC3 proof to queries for
170
	an empty non terminal derived from an Opt-Out NSEC3 RR, as clarified
171 172 173 174
	in errata 3441 for RFC5155.  Previously it regarded such case as
	broken zone and returned SERVFAIL.
	(Trac #2659, git 24c235cb1b379c6472772d340e21577c3460b742)

175 176 177 178 179 180 181
577.	[func]		muks
	Added an SQLite3 index on records(rname, rdtype). This decreases
	insert performance by ~28% and adds about ~20% to the file size,
	but increases zone iteration performance. As it introduces a new
	index, a database upgrade would be required.
	(Trac #1756, git 9b3c959af13111af1fa248c5010aa33ee7e307ee)

182 183 184
576.	[bug]		tmark, tomek
	b10-dhcp6: Fixed bug when the server aborts operation when
	receiving renew and there are no IPv6 subnets configured.
Jeremy C. Reed's avatar
Jeremy C. Reed committed
185
	(Trac #2719, git 3132b8b19495470bbfd0f2ba0fe7da443926034b)
186

187 188 189 190 191 192 193 194
575.	[bug]		marcin
	b10-dhcp6: Fixed the bug whereby the subnet for the incoming
	packet was selected using only its source address. The subnet
	is now selected using either source address or the name of the
	server's interface on which the packet has been received.
	(Trac #2704, git 1cbacf19a28bdae50bb9bd3767bca0147fde37ed)

574.	[func]		tmark
195 196 197 198 199 200
	b10-dhcp4, b10-dhcp6: Composite key indexes were added to the lease
	tables to reduce lease search time. The lease4 table now has two
	additional indexes: a) hwaddr/subnet_id and b) client_id/subnet_id.
	The lease6 now has the one additional index: iaid/subnet_id/duid.
	Adding these indexes significantly improves lease acquisition
	performance.
201
	(Trac #2699,#2703, git 54bbed5fcbe237c5a49b515ae4c55148723406ce)
202

Stephen Morris's avatar
Stephen Morris committed
203 204 205 206 207 208
573.	[bug]		stephen
	Fixed problem whereby the DHCP server crashed if it ran out of
	addresses.  Such a condition now causes a packet to be returned
	to the client refusing the allocation of an address.
	(Trac #2681, git 87ce14cdb121b37afb5b1931af51bed7f6323dd6)

209 210 211 212 213
572.	[bug]		marcin
	perfdhcp: Fixed bug where the command line switches used to
	run the perfdhcp where printed as ASCII codes.
	(Trac #2700, git b8d6b949eb7f4705e32fbdfd7694ca2e6a6a5cdc)

214 215 216 217 218 219
571.	[build]		jinmei
	The ./configure script can now handle output from python-config
	--ldflags that contains a space after -L switches.  This fixes
	failure reported on some Solaris environments.
	(Trac #2661, git e6f86f2f5eec8e6003c13d36804a767a840d96d6)

220
570.	[bug]		tmark, marcin, tomek
221
	b10-dhcp4: Address renewal now works properly for DHCPv4 clients
Tomek Mrugalski's avatar
Tomek Mrugalski committed
222 223
	that do not send client ID.
	(Trac #2702, git daf2abe68ce9c111334a15c14e440730f3a085e2)
224

225
569.	[bug]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
226 227 228 229
	b10-dhcp4: Fix bug whereby a DHCP packet without a client ID
	could crash the MySQL lease database backend.
	(Trac #2697, git b5e2be95d21ed750ad7cf5e15de2058aa8bc45f4)

Jeremy C. Reed's avatar
Jeremy C. Reed committed
230
568.	[func]		muks
231 232 233 234
	Various message IDs have been renamed to remove the word 'ERROR'
	from them when they are not logged at ERROR severity level.
	(Trac #2672, git 660a0d164feaf055677f375977f7ed327ead893e)

235 236 237 238
567.	[doc]		marcin, stephen, tomek
	Update DHCP sections of the BIND 10 guide.
	(Trac #2657, git 1d0c2004865d1bf322bf78d13630d992e39179fd)

239 240 241 242 243 244 245 246 247 248 249 250
566.	[func]*		jinmei
	libdns++/Python isc.dns: In Python isc.dns, function style
	constants for RRType, RRClass, Rcode and Opcode were deprecated
	and replaced with straightforward object constants, e.g., from
	RRType.AAAA() to RRType.AAAA.  This is a backward incompatible
	change (see the Trac ticket for a conversion script if needed).
	Also, these constants are now more consistent between C++
	and Python, and RRType constants for all currently standardized
	types are now supported (even if Rdata for these are not yet
	available).
	(Trac #1866 and #2409, git e5005185351cf73d4a611407c2cfcd163f80e428)

251 252 253 254 255 256 257 258 259 260 261
565.	[func]*		jelte
	The main initializer script (formerly known as either 'bind10',
	'boss', or 'bob'), has been renamed to b10-init (and Init in
	configuration). Configuring which components are run is henceforth
	done through '/Init/components', and the sbin/bind10 script is now
	simply a shellscript that runs b10-init. Existing configuration is
	automatically updated. NOTE: once configuration with this update
	has been saved (by committing any new change with bindctl), you
	cannot run older versions of BIND 10 anymore with this configuration.
	(Trac #1901, git bae3798603affdb276f370c1ac6b33b011a5ed4f)

262 263 264 265 266 267 268 269 270 271 272 273
564.	[func]		muks
	libdns++: the CNAME, DNAME, MX, NS, PTR and SRV Rdata classes now
	use the generic lexer in constructors from text.  This means that
	the name fields in such RRs in a zone file can now be non-absolute
	(the origin name in that context will be used), e.g., when loaded
	by b10-loadzone. One additional change to the libdns++ API is that
	the existing string constructors for these Rdata classes also use
	the generic lexer, and they now expect an absolute name (with the
	trailing '.') in the name fields.
	(Trac #2390, git a01569277cda3f78b1171bbf79f15ecf502e81e2)
	(Trac #2656, git 5a0d055137287f81e23fbeedd35236fee274596d)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
274 275 276 277 278
563.	[build]		jinmei
	Added --disable-rpath configure option to avoid embedding library
	paths to binaries.  Patch from Adam Tkac.
	(Trac #2667, git 1c50c5a6ee7e9675e3ab154f2c7f975ef519fca2)

Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
279 280
562.	[func]*		vorner
	The b10-xfrin now performs basic sanity check on just received
Jeremy C. Reed's avatar
Jeremy C. Reed committed
281
	zone. It'll reject severely broken zones (such as missing NS
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
282 283 284
	records).
	(Trac #2439, git 44699b4b18162581cd1dd39be5fb76ca536012e6)

285 286 287 288 289 290
561.	[bug]		kambe, jelte
	b10-stats-httpd no longer dumps request information to the console,
	but uses the bind10 logging system. Additionally, the logging
	identifiers have been changed from STATHTTPD_* to STATSHTTPD_*
	(Trac #1897, git 93716b025a4755a8a2cbf250a9e4187741dbc9bb)

291 292 293 294 295 296 297 298
560.	[bug]		jinmei
	b10-auth now sets the TTL of SOA RR for negative responses to
	the minimum of the RR TTL and the minimum TTL of the SOA RDATA
	as specified in RFC2308; previously the RR TTL was always used.
	The ZoneFinder class was extended partly for implementing this
	and partly for allowing further optimization.
	(Trac #2309 and #2635, git ee17e979fcde48b59d91c74ac368244169065f3b)

299 300 301 302 303 304 305 306 307
559.	[bug]		jelte
	b10-cmdctl no longer aborts on basic file issues with its https
	certificate or private key file. It performs additional checks, and
	provides better error logs if these fail. Additionally, bindctl
	provides a better error report if it is unable to connect over
	https connection. This issue could occur if BIND 10 was installed
	with root privileges but then started as a normal user.
	(Trac #2595, git 09b1a2f927483b407d70e98f5982f424cc872149)

308 309 310 311 312 313 314 315
558.	[func]		marcin
	b10-dhcp4: server now adds configured options to its
	responses to a client when client requests them.
	A few basic options: Routers, Domain Name, Domain
	Name Servers and Subnet Mask are added regardless
	if client requested them or not.
	(Trac #2591, git aeec2dc1b9c511d17971ac63138576c37e7c5164)

316
557.	[doc]		stephen
317 318 319
	Update DHCP sections of the BIND 10 guide.
	(Trac #2642, git e5faeb5fa84b7218fde486347359504cf692510e)

320 321 322 323 324 325 326 327 328
556.	[bug]		marcin
	Fixed DHCP servers configuration whereby the servers did not
	receive a configuration stored in the database on their startup.
	Also, the configuration handler function now uses full configuration
	instead of partial to configure the server. This guarantees that
	dependencies between various configuration parameters are
	fulfilled.
	(Trac #2637, git 91aa998226f1f91a232f2be59a53c9568c4ece77)

329 330 331 332 333 334
555.	[func]		marcin
	The encapsulated option space name can be specified for
	a DHCP option. It comprises sub-options being sent within
	an option that encapsulates this option space.
	(Trac #2314, git 27e6119093723a1e46a239ec245a8b4b10677635)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
335 336 337 338 339 340 341 342
554.	[func]		jinmei
	b10-loadzone: improved completion log message and intermediate
	reports: It now logs the precise number of loaded RRs on
	completion, and intermediate reports show additional information
	such as the estimated progress in percentage and estimated time
	to complete.
	(Trac #2574, git 5b8a824054313bdecb8988b46e55cb2e94cb2d6c)

Jeremy C. Reed's avatar
Jeremy C. Reed committed
343
553.	[func]		stephen
344 345 346 347
	Values of the parameters to access the DHCP server lease database
	can now be set through the BIND 10 configuration mechanism.
	(Trac #2559, git 6c6f405188cc02d2358e114c33daff58edabd52a)

Jeremy C. Reed's avatar
Jeremy C. Reed committed
348 349
552.	[bug]		shane
	Build on Raspberry PI.
350 351 352 353 354 355
	The main issue was use of char for reading from input streams,
	which is incorrect, as EOF is returned as an int -1, which would
	then get cast into a char -1.
	A number of other minor issues were also fixed.
	(Trac #2571, git 525333e187cc4bbbbde288105c9582c1024caa4a)

Jeremy C. Reed's avatar
Jeremy C. Reed committed
356
551.	[bug]		shane
357 358 359 360
	Kill msgq if we cannot connect to it on startup.
	When the boss process was unable to connect to the msgq, it would
	exit. However, it would leave the msgq process running. This has
	been fixed, and the msgq is now stopped in this case.
361
	(Trac #2608, git 016925ef2437e0396127e135c937d3a55539d224)
362 363

550.	[func]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
364 365 366 367 368
	b10-dhcp4: The DHCPv4 server now generates a server identifier
	the first time it is run. The identifier is preserved in a file
	across server restarts.
	b10-dhcp6: The server identifier is now preserved in a file across
	server restarts.
369 370
	(Trac #2597, git fa342a994de5dbefe32996be7eebe58f6304cff7)

371
549.	[func]		tomek
372 373 374
	b10-dhcp6: It is now possible to specify that a configured subnet
	is reachable locally over specified interface (see "interface"
	parameter in Subnet6 configuration).
375 376 377
	(Trac #2596, git a70f6172194a976b514cd7d67ce097bbca3c2798)

548.	[func]		vorner
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
378 379 380 381 382 383 384
	The message queue daemon now appears on the bus. This has two
	effects, one is it obeys logging configuration and logs to the
	correct place like the rest of the modules. The other is it
	appears in bindctl as module (but it doesn't have any commands or
	configuration yet).
	(Trac #2582, git ced31d8c5a0f2ca930b976d3caecfc24fc04634e)

Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
385 386 387 388
547.	[func]*		vorner
	The b10-loadzone now performs more thorough sanity check on the
	loaded data.  Some of the checks are now fatal and zone failing
	them will be rejected.
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
389
	(Trac #2436, git 48d999f1cb59f308f9f30ba2639521d2a5a85baa)
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
390

391 392 393 394 395 396 397 398 399
546.	[func]		marcin
	DHCP option definitions can be now created using the
	Configuration Manager. The option definition specifies
	the option code, name and the types of the data being
	carried by the option.  The Configuration Manager
	reports an error on attempt to override standard DHCP
	option definition.
	(Trac #2317, git 71e25eb81e58a695cf3bad465c4254b13a50696e)

400 401 402 403 404 405 406
545.	[func]		jinmei
	libdns++: the SOA Rdata class now uses the generic lexer in
	constructors from text.  This means that the MNAME and RNAME of an
	SOA RR in a zone file can now be non absolute (the origin name
	in that context will be used), e.g., when loaded by b10-loadzone.
	(Trac #2500, git 019ca218027a218921519f205139b96025df2bb5)

407
544.	[func]		tomek
408 409 410 411 412 413 414
	b10-dhcp4: Allocation engine support for IPv4 added. Currently
	supported operations are server selection (Discover/Offer),
	address assignment (Request/Ack), address renewal (Request/Ack),
	and address release (Release). Expired leases can be reused.
	Some options (e.g. Router Option) are still hardcoded, so the
	DHCPv4 server is not yet usable, although its address allocation
	is operational.
415 416
	(Trac #2320, git 60606cabb1c9584700b1f642bf2af21a35c64573)

417 418 419
543.	[func]*		jelte
	When calling getFullConfig() as a module, , the configuration is now
	returned as properly-structured JSON.  Previously, the structure had
Jeremy C. Reed's avatar
Jeremy C. Reed committed
420 421
	been flattened, with all data being labelled by fully-qualified
	element names.
422 423
	(Trac #2619, git bed3c88c25ea8f7e951317775e99ebce3340ca22)

424 425 426 427 428 429 430 431 432 433 434
542.	[func]		marcin
	Created OptionSpace and OptionSpace6 classes to represent DHCP
	option spaces. The option spaces are used to group instances
	and definitions of options having uniqe codes. A special type
	of option space is the so-called "vendor specific option space"
	which groups sub-options sent within Vendor Encapsulated Options.
	The new classes are not used yet but they will be used once
	the creation of option spaces by configuration manager is
	implemented.
	(Trac #2313, git 37a27e19be874725ea3d560065e5591a845daa89)

435
541.	[func]		marcin
436
	Added routines to search for configured DHCP options and their
437
	definitions using name of the option space they belong to.
438 439
	New routines are called internally from the DHCPv4 and DHCPv6
	servers code.
440 441
	(Trac #2315, git 741fe7bc96c70df35d9a79016b0aa1488e9b3ac8)

442 443 444 445 446 447 448 449 450
540.	[func]		marcin
	DHCP Option values can be now specified using a string of
	tokens separated with comma sign. Subsequent tokens are used
	to set values for corresponding data fields in a particular
	DHCP option. The format of the token matches the data type
	of the corresponding option field: e.g. "192.168.2.1" for IPv4
	address, "5" for integer value etc.
	(Trac #2545, git 792c129a0785c73dd28fd96a8f1439fe6534a3f1)

Stephen Morris's avatar
Stephen Morris committed
451 452 453 454
539.	[func]		stephen
	Add logging to the DHCP server library.
	(Trac #2524, git b55b8b6686cc80eed41793c53d1779f4de3e9e3c)

Mukund Sivaraman's avatar
Mukund Sivaraman committed
455 456 457 458 459 460 461
538.	[bug]		muks
	Added escaping of special characters (double-quotes, semicolon,
	backslash, etc.) in text-like RRType's toText() implementation.
	Without this change, some TXT and SPF RDATA were incorrectly
	stored in SQLite3 datasource as they were not escaped.
	(Trac #2535, git f516fc484544b7e08475947d6945bc87636d4115)

462
537.	[func]		tomek
463 464
	b10-dhcp6: Support for RELEASE message has been added. Clients
	are now able to release their non-temporary IPv6 addresses.
465 466
	(Trac #2326, git 0974318566abe08d0702ddd185156842c6642424)

467 468 469 470 471 472 473 474 475 476 477
536.	[build]		jinmei
	Detect a build issue on FreeBSD with g++ 4.2 and Boost installed via
	FreeBSD ports at ./configure time.  This seems to be a bug of
	FreeBSD	ports setup and has been reported to the maintainer:
	http://www.freebsd.org/cgi/query-pr.cgi?pr=174753
	Until it's fixed, you need to build BIND 10 for FreeBSD that has
	this problem with specifying --without-werror, with clang++
	(development version), or with manually extracted Boost header
	files (no compiled Boost library is necessary).
	(Trac #1991, git 6b045bcd1f9613e3835551cdebd2616ea8319a36)

478 479 480 481 482
535.	[bug]		jelte
	The log4cplus internal logging mechanism has been disabled, and no
	output from the log4cplus library itself should be printed to
	stderr anymore. This output can be enabled by using the
	compile-time option --enable-debug.
483
	(Trac #1081, git db55f102b30e76b72b134cbd77bd183cd01f95c0)
484

Jeremy C. Reed's avatar
Jeremy C. Reed committed
485
534.	[func]*		vorner
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
486 487 488 489 490 491
	The b10-msgq now uses the same logging format as the rest
	of the system. However, it still doesn't obey the common
	configuration, as due to technical issues it is not able
	to read it yet.
	(git 9e6e821c0a33aab0cd0e70e51059d9a2761f76bb)

492 493
bind10-1.0.0-beta released on December 20, 2012

494 495 496 497 498 499 500 501 502
533.	[build]*		jreed
	Changed the package name in configure.ac from bind10-devel
	to bind10. This means the default sub-directories for
	etc, include, libexec, share, share/doc, and var are changed.
	If upgrading from a previous version, you may need to move
	and update your configurations or change references for the
	old locations.
	(git bf53fbd4e92ae835280d49fbfdeeebd33e0ce3f2)

503 504 505 506 507 508 509 510 511
532.	[func]		marcin
	Implemented configuration of DHCPv4 option values using
	the configuration manager. In order to set values for the
	data fields carried by a particular option, the user
	specifies a string of hexadecimal digits that is converted
	to binary data and stored in the option buffer. A more
	user-friendly way of specifying option content is planned.
	(Trac #2544, git fed1aab5a0f813c41637807f8c0c5f8830d71942)

512
531.	[func]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
513 514 515
	b10-dhcp6: Added support for expired leases. Leases for IPv6
	addresses that are past their valid lifetime may be recycled, i.e.
	rellocated to other clients if needed.
516 517
	(Trac #2327, git 62a23854f619349d319d02c3a385d9bc55442d5e)

518 519 520 521 522 523 524 525 526 527 528 529 530 531
530.	[func]*		team
	b10-loadzone was fully overhauled.  It now uses C++-based zone
	parser and loader library, performing stricter checks, having
	more complete support for master file formats, producing more
	helpful logs, is more extendable for various types of data
	sources, and yet much faster than the old version.  In
	functionality the new version should be generally backwards
	compatible to the old version, but there are some
	incompatibilities: name fields of RDATA (in NS, SOA, etc) must
	be absolute for now; due to the stricter checks some input that was
	(incorrectly) accepted by the old version may now be rejected;
	command line options and arguments are not compatible.
	(Trac #2380, git 689b015753a9e219bc90af0a0b818ada26cc5968)

532
529.	[func]*		team
533 534 535 536 537 538 539 540 541 542 543
	The in-memory data source now uses a more complete master
	file parser to load textual zone files.  As of this change
	it supports multi-line RR representation and more complete
	support for escaped and quoted strings.  It also produces
	more helpful log messages when there is an error in the zone
	file.  It will be enhanced as more specific tasks in the
	#2368 meta ticket are completed.  The new parser is generally
	backward compatible to the previous one, but due to the
	tighter checks some input that has been accepted so far
	could now be rejected, so it's advisable to check if you
	use textual zone files directly loaded to memory.
544 545
	(Trac #2470, git c4cf36691115c15440b65cac16f1c7fcccc69521)

546 547 548 549 550 551 552
528.	[func]		marcin
	Implemented definitions for DHCPv4 option definitions identified
	by option codes: 1 to 63, 77, 81-82, 90-92, 118-119, 124-125.
	These definitions are now used by the DHCPv4 server to parse
	options received from a client.
	(Trac #2526, git 50a73567e8067fdbe4405b7ece5b08948ef87f98)

553 554 555 556 557 558 559 560
527.	[bug]		jelte
	Fixed a bug in the synchronous UDP server code where unexpected
	errors from ASIO or the system libraries could cause b10-auth to
	stop. In asynchronous mode these errors would be ignored
	completely. Both types have been updated to report the problem with
	an ERROR log message, drop the packet, and continue service.
	(Trac #2494, git db92f30af10e6688a7dc117b254cb821e54a6d95)

561
526.	[bug]		stephen
562 563 564 565 566
	Miscellaneous fixes to DHCP code including rationalisation of
	some methods in LeaseMgr and resolving some Doxygen/cppcheck
	issues.
	(Trac #2546, git 0140368ed066c722e5d11d7f9cf1c01462cf7e13)

567
525.	[func]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
568 569 570 571
	b10-dhcp4: DHCPv4 server is now able to parse configuration. It
	is possible to specify IPv4 subnets with dynamic pools within
	them. Although configuration is accepted, it is not used yet. This
	will be implemented shortly.
572 573
	(Trac #2270, git de29c07129d41c96ee0d5eebdd30a1ea7fb9ac8a)

574
524.	[func]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
575 576
	b10-dhcp6 is now able to handle RENEW messages. Leases are
	renewed and REPLY responses are sent back to clients.
577 578
	(Trac #2325, git 7f6c9d057cc0a7a10f41ce7da9c8565b9ee85246)

579 580 581 582 583 584
523.	[bug]		muks
	Fixed a problem in inmem NSEC3 lookup (for, instance when using a
	zone with no non-apex names) which caused exceptions when the zone
	origin was not added as an explicit NSEC3 record.
	(Trac #2503, git 6fe86386be0e7598633fe35999112c1a6e3b0370)

585
522.	[func]*		jelte
586 587 588 589 590 591 592 593
	Configuration of TSIG keys for b10-xfrin has changed; instead of
	specifying the full TSIG key (<name>:<base64>:<algo>) it now expects
	just the name, and uses the global TSIG Key Ring like all the other
	components (configuration list /tsig_keys/keys).
	Note: this is not automatically updated, so if you use TSIG in
	xfrin, you need to update your configuration.
	(Trac #1351, git e65b7b36f60f14b7abe083da411e6934cdfbae7a)

594 595 596 597 598 599
521.	[func]		marcin
	Implemented definitions for DHCPv6 standard options identified
	by codes up to 48. These definitions are now used by the DHCPv6
	server to create instances of options being sent to a client.
	(Trac #2491, git 0a4faa07777189ed9c25211987a1a9b574015a95)

600 601 602 603 604 605 606 607 608 609 610 611 612 613
520.	[func]		jelte
	The system no longer prints initial log messages to stdout
	regardless of what logging configuration is present, but it
	temporarily stores any log messages until the configuration is
	processed. If there is no specific configuration, or if the
	configuration cannot be accessed, it will still fall back to stdout.
	Note that there are still a few instances where output is printed,
	these shall be addressed separately.
	Note also that, currently, in case it falls back to stdout (such as
	when it cannot connect to b10-cfgmgr), all log messages are always
	printed (including debug messages), regardless of whether -v was
	used. This shall also be addressed in a future change.
	(Trac #2445, git 74a0abe5a6d10b28e4a3e360e87b129c232dea68)

Mukund Sivaraman's avatar
Mukund Sivaraman committed
614
519.	[bug]		muks
615 616
	Fixed a problem in inmem NSEC lookup which caused returning an
	incorrect NSEC record or (in rare cases) assert failures
617 618
	when a non-existent domain was queried, which was a sub-domain of
	a domain that existed.
Mukund Sivaraman's avatar
Mukund Sivaraman committed
619 620
	(Trac #2504, git 835553eb309d100b062051f7ef18422d2e8e3ae4)

621 622 623 624
518.	[func]		stephen
	Extend DHCP MySQL backend to handle IPv4 addresses.
	(Trac #2404, git ce7db48d3ff5d5aad12b1da5e67ae60073cb2607)

625 626 627 628 629
517.	[func]		stephen
	Added IOAddress::toBytes() to get byte representation of address.
	Also added convenience methods for V4/V6 address determination.
	(Trac #2396, git c23f87e8ac3ea781b38d688f8f7b58539f85e35a)

630 631 632 633 634 635 636
516.	[bug]		marcin
	Fixed 'make distcheck' failure when running perfdhcp unit tests.
	The unit tests used to read files from the folder specified
	with the path relative to current folder, thus when the test was
	run from a different folder the files could not be found.
	(Trac #2479, git 4e8325e1b309f1d388a3055ec1e1df98c377f383)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
637 638 639 640 641 642 643 644
515.	[bug]		jinmei
	The in-memory data source now accepts an RRSIG provided without
	a covered RRset in loading.  A subsequent query for its owner name
	of the covered type would generally result in NXRRSET; if the
	covered RRset is of type NSEC3, the corresponding NSEC3 processing
	would result in SERVFAIL.
	(Trac #2420, git 6744c100953f6def5500bcb4bfc330b9ffba0f5f)

645 646 647 648 649 650
514.	[bug]		jelte
	b10-msgq now handles socket errors more gracefully when sending data
	to clients. It no longer exits with 'broken pipe' errors, and is
	also better at resending data on temporary error codes from send().
	(Trac #2398, git 9f6b45ee210a253dca608848a58c824ff5e0d234)

651 652 653 654 655 656 657 658
513.	[func]		marcin
	Implemented the OptionCustom class for DHCPv4 and DHCPv6.
	This class represents an option which has a defined
	structure: a set of data fields of specific types and order.
	It is used to represent those options that can't be
	represented by any other specialized class.
	(Trac #2312, git 28d885b457dda970d9aecc5de018ec1120143a10)

659 660 661 662 663 664 665 666
512.	[func]		jelte
	Added a new tool b10-certgen, to check and update the self-signed
	SSL certificate used by b10-cmdctl. The original certificate
	provided has been removed, and a fresh one is generated upon first
	build. See the b10-certgen manpage for information on how to update
	existing installed certificates.
	(Trac #1044, git 510773dd9057ccf6caa8241e74a7a0b34ca971ab)

667 668 669 670 671 672 673 674
511.	[bug]		stephen
	Fixed a race condition in the DHCP tests whereby the test program
	spawned a subprocess and attempted to read (without waiting) from
	the interconnecting pipe before the subprocess had written
	anything.  The lack of output was being interpreted as a test
	failure.
	(Trac #2410, git f53e65cdceeb8e6da4723730e4ed0a17e4646579)

675 676 677 678 679 680 681 682
510.	[func]		marcin
	DHCP option instances can be created using a collection of strings.
	Each string represents a value of a particular data field within
	an option. The data field values, given as strings, are validated
	against the actual types of option fields specified in the options
	definitions.
	(Trac #2490, git 56cfd6612fcaeae9acec4a94e1e5f1a88142c44d)

Mukund Sivaraman's avatar
Mukund Sivaraman committed
683 684 685 686 687
509.	[func]		muks
	Log messages now include the pid of the process that logged the
	message.
	(Trac #1745, git fc8bbf3d438e8154e7c2bdd322145a7f7854dc6a)

688 689 690 691 692 693 694
508.	[bug]		stephen
	Split the DHCP library into two directories, each with its own
	Makefile.  This properly solves the problem whereby a "make"
	operation with multiple threads could fail because of the
	dependencies between two libraries in the same directory.
	(Trac #2475, git 834fa9e8f5097c6fd06845620f68547a97da8ff8)

695 696
bind10-devel-20121115 released on November 15, 2012

697
507.	[doc]		jelte
698 699 700 701
	Added a chapter about the use of the bindctl command tool to
	to the BIND 10 guide.
	(Trac #2305, git c4b0294b5bf4a9d32fb18ab62ca572f492788d72)

702 703 704 705 706 707 708
506.	[security]		jinmei
	Fixed a use-after-free case in handling DNAME record with the
	in-memory data source.  This could lead to a crash of b10-auth
	if it serves a zone containing a DNAME RR from the in-memory
	data source.  This bug was introduced at bind10-devel-20120927.
	(Trac #2471, git 2b1793ac78f972ddb1ae2fd092a7f539902223ff)

709 710 711 712 713 714
505.	[bug]		jelte
	Fixed a bug in b10-xfrin where a wrong call was made during the
	final check of a TSIG-signed transfer, incorrectly rejecting the
	transfer.
	(Trac #2464, git eac81c0cbebee72f6478bdb5cda915f5470d08e1)

Naoki Kambe's avatar
Naoki Kambe committed
715 716
504.	[bug]*		naokikambe
	Fixed an XML format viewed from b10-stats-httpd. Regarding
717 718 719 720 721 722
	per-zone counters as zones of Xfrout, a part of the item
	values wasn't an exact XML format. A zone name can be
	specified in URI as
	/bind10/statistics/xml/Xfrout/zones/example.org/xfrreqdone.
	XSD and XSL formats are also changed to constant ones due
	to these changes.
Naoki Kambe's avatar
Naoki Kambe committed
723 724
	(Trac #2298, git 512d2d46f3cb431bcdbf8d90af27bff8874ba075)

725
503.	[func]		Stephen
726 727 728 729 730 731 732 733
	Add initial version of a MySQL backend for the DHCP code.  This
	implements the basic IPv6 lease access functions - add lease, delete
	lease and update lease.  The backend is enabled by specifying
	--with-dhcp-mysql on the "configure" command line: without this
	switch, the MySQL code is not compiled, so leaving BIND 10 able to
	be built on systems without MySQL installed.
	(Trac #2342, git c7defffb89bd0f3fdd7ad2437c78950bcb86ad37)

734
502.	[func]		vorner
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
735 736 737 738
	TTLs can be specified with units as well as number of seconds now.
	This allows specifications like "1D3H".
	(Trac #2384, git 44c321c37e17347f33ced9d0868af0c891ff422b)

739
501.	[func]		tomek
740 741 742 743
	Added DHCPv6 allocation engine, now used in the processing of DHCPv6
	messages.
	(Trac #2414, git b3526430f02aa3dc3273612524d23137b8f1fe87)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
744 745 746 747 748 749 750 751 752 753
500.	[bug]		jinmei
	Corrected the autoconf example in the examples directory so it can
	use the configured path to Boost to check availability of the BIND 10
	library.  Previously the sample configure script could fail if
	Boost is installed in an uncommon place.  Also, it now provides a
	helper m4 function and example usage for embedding the library
	path to executable (using linker options like -Wl,-R) to help
	minimize post-build hassles.
	(Trac #2356, git 36514ddc884c02a063e166d44319467ce6fb1d8f)

754 755 756 757 758 759
499.	[func]		team
	The b10-auth 'loadzone' command now uses the internal thread
	introduced in 495 to (re)load a zone in the background, so that
	query processing isn't blocked while loading a zone.
	(Trac #2213, git 686594e391c645279cc4a95e0e0020d1c01fba7e)

760 761 762 763
498.	[func]		marcin
	Implemented DHCPv6 option values configuration using configuration
	manager. In order to set values for data fields carried by the
	particular option, user specifies the string of hexadecimal digits
764 765 766
	that is in turn converted to binary data and stored into option
	buffer. More user friendly way of option content specification is
	planned.
767 768
	(Trac #2318, git e75c686cd9c14f4d6c2a242a0a0853314704fee9)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
769 770 771 772 773 774 775 776 777
497.	[bug]		jinmei
	Fixed several issues in isc-sysinfo:
	- make sure it doesn't report a negative value for free memory
	  size (this happened on FreeBSD, but can possibly occur on other
	  BSD variants)
	- correctly identifies the SMP support in kernel on FreeBSD
	- print more human readable uptime as well as the time in seconds
	(Trac #2297, git 59a449f506948e2371ffa87dcd19059388bd1657)

778
496.	[func]		tomek
779 780 781 782
	DHCPv6 Allocation Engine implemented. It allows address allocation
	from the configured subnets/pools. It currently features a single
	allocator: IterativeAllocator, which assigns addresses iteratively.
	Other allocators (hashed, random) are planned.
783 784
	(Trac #2324, git 8aa188a10298e3a55b725db36502a99d2a8d638a)

785 786 787 788 789 790 791 792
495.	[func]		team
	b10-auth now handles reconfiguration of data sources in
	background using a separate thread.  This means even if the new
	configuration includes a large amount of data to be loaded into
	memory (very large zones and/or a very large number of zones),
	the reconfiguration doesn't block query handling.
	(Multiple Trac tickets up to #2211)

793 794 795 796 797 798 799 800 801 802 803 804 805 806 807
494.	[bug]		jinmei
	Fixed a problem that shutting down BIND 10 kept some of the
	processes alive.  It was two-fold: when the main bind10 process
	started as a root, started b10-sockcreator with the privilege, and
	then dropped the privilege, the bind10 process cannot kill the
	sockcreator via signal any more (when it has to), but it kept
	sending the signal and didn't stop.  Also, when running on Python
	3.1 (or older), the sockcreator had some additional file
	descriptor open, which prevented it from exiting even after the
	bind10 process terminated.  Now the bind10 process simply gives up
	killing a subprocess if it fails due to lack of permission, and it
	makes sure the socket creator is spawned without any unnecessary
	FDs open.
	(Trac #1858, git 405d85c8a0042ba807a3a123611ff383c4081ee1)

808 809 810 811 812 813 814 815 816 817 818
493.	[build]		jinmei
	Fixed build failure with newer versions of clang++.  These
	versions are stricter regarding "unused variable" and "unused
	(driver) arguments" warnings, and cause fatal build error
	with -Werror.  The affected versions of clang++ include Apple's
	customized version 4.1 included in Xcode 4.5.1.  So this fix
	will solve build errors for Mac OS X that uses newer versions of
	Xcode.
	(Trac #2340, git 55be177fc4f7537143ab6ef5a728bd44bdf9d783,
	3e2a372012e633d017a97029d13894e743199741 and commits before it
	with [2340] in the commit log)
Tomek Mrugalski's avatar
Tomek Mrugalski committed
819

820
492.	[func]		tomek
821
	libdhcpsrv: The DHCP Configuration Manager is now able to store
Tomek Mrugalski's avatar
Tomek Mrugalski committed
822
	information about IPv4 subnets and pools. It is still not possible
823 824 825 826
	to configure that information. Such capability will be implemented
	in a near future.
	(Trac #2237, git a78e560343b41f0f692c7903c938b2b2b24bf56b)

827 828 829 830 831 832 833 834
491.	[func]		tomek
	b10-dhcp6: Configuration for DHCPv6 has been implemented.
	Currently it is possible to configure IPv6 subnets and pools
	within those subnets, global and per subnet values of renew,
	rebind, preferred and valid lifetimes. Configured parameters
	are accepted, but are not used yet by the allocation engine yet.
	(Trac #2269, git 028bed9014b15facf1a29d3d4a822c9d14fc6411)

835
490.	[func]		tomek
836
	libdhcpsrv: An abstract API for lease database has been
837 838
	implemented. It offers a common interface to all concrete
	database backends.
839 840
	(Trac #2140, git df196f7609757253c4f2f918cd91012bb3af1163)

Mukund Sivaraman's avatar
Mukund Sivaraman committed
841 842 843 844 845 846
489.	[func]		muks
	The isc::dns::RRsetList class has been removed. It was now unused
	inside the BIND 10 codebase, and the interface was considered
	prone to misuse.
	(Trac #2266, git 532ac3d0054f6a11b91ee369964f3a84dabc6040)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
847 848
488.	[build]		jinmei
	On configure, changed the search order for Python executable.
849
	It first tries more specific file names such as "python3.2" before
JINMEI Tatuya's avatar
JINMEI Tatuya committed
850 851 852 853
	more generic "python3".  This will prevent configure failure on
	Mac OS X that installs Python3 via recent versions of Homebrew.
	(Trac #2339, git 88db890d8d1c64de49be87f03c24a2021bcf63da)

854 855 856 857 858 859 860 861 862 863 864 865
487.	[bug]		jinmei
	The bind10 process now terminates a component (subprocess) by the
	"config remove Boss/components" bindctl command even if the
	process crashes immediately before the command is sent to bind10.
	Previously this led to an inconsistent state between the
	configuration and an internal component list of bind10, and bind10
	kept trying to restart the component.  A known specific case of
	this problem is that b10-ddns could keep failing (due to lack of
	dependency modules) and the administrator couldn't stop the
	restart via bindctl.
	(Trac #2244, git 7565788d06f216ab254008ffdfae16678bcd00e5)

866 867 868
486.	[bug]*		jinmei
	All public header files for libb10-dns++ are now installed.
	Template configure.ac and utility AC macros for external projects
869
	using the library are provided under the "examples" directory.
870 871 872 873
	The src/bin/host was moved as part of the examples (and not
	installed with other BIND 10 programs any more).
	(Trac #1870, git 4973e638d354d8b56dcadf71123ef23c15662021)

874 875 876 877 878 879 880 881 882
485.	[bug]		jelte
	Several bugs have been fixed in bindctl; tab-completion now works
	within configuration lists, the problem where sometimes the
	completion added a part twice has been solved, and it no longer
	suggests the confusing value 'argument' as a completion-hint for
	configuration items. Additionally, bindctl no longer crashes upon
	input like 'config remove Boss'.
	(Trac #2254, git 9047de5e8f973e12e536f7180738e6b515439448)

883
484.	[func]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
884 885 886 887
	A new library (libb10-dhcpsrv) has been created. At present, it
	only holds the code for the DHCP Configuration Manager. Currently
	this object only supports basic configuration storage for the DHCPv6
	server,	but that capability will be expanded.
888 889
	(Trac #2238, git 6f29861b92742da34be9ae76968e82222b5bfd7d)

Jeremy C. Reed's avatar
Jeremy C. Reed committed
890 891 892 893 894 895 896 897 898 899
bind10-devel-20120927 released on September 27, 2012

483.	[func]		marcin
	libdhcp++: Added new parameter to define sub-second timeout
	for DHCP packet reception. The total timeout is now specified
	by two parameters:  first specifies integral number of
	seconds, second (which defaults to 0) specifies fractional
	seconds with microsecond resolution.
	(Trac #2231, git 15560cac16e4c52129322e3cb1787e0f47cf7850)

900 901 902 903 904 905 906 907 908 909 910
482.	[func]		team
	Memory footprint of the in-memory data source has been
	substantially improved.  For example, b10-auth now requires much
	less memory than BIND 9 named for loading and serving the same
	zone in-memory.  This is a transparent change in terms of user
	operation; there's no need to update or change the configuration
	to enable this feature.
	Notes: multiple instances of b10-auth still make separate copies
	of the memory image.  Also, loading zones in memory still suspends
	query processing, so manual reloading or reloading after incoming
	transfer may cause service disruption for huge zones.
Jeremy C. Reed's avatar
Jeremy C. Reed committed
911
	(Multiple Trac tickets, Summarized in Trac #2101)
912

Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
913 914
481.	[bug]		vorner
	The abbreviated form of IP addresses in ACLs is accepted
915
	(eg. "from": ["127.0.0.1", "::1"] now works).
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
916 917
	(Trac #2191, git 48b6e91386b46eed383126ad98dddfafc9f7e75e)

Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
918
480.	[doc]		vorner
Jeremy C. Reed's avatar
Jeremy C. Reed committed
919
	Added documentation about global TSIG key ring to the Guide.
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
920
	(Trac #2189, git 52177bb31f5fb8e134aecb9fd039c368684ad2df)
Jeremy C. Reed's avatar
Jeremy C. Reed committed
921

922 923 924
479.	[func]		marcin
	Refactored perfdhcp tool to C++, added missing unit tests and removed
	the old code. The new code uses libdhcp++ (src/lib/dhcp) for DHCP
925 926
	packet management, network interface management and packet
	transmission.
927 928 929 930 931 932 933 934
	(Trac #1954, git 8d56105742f3043ed4b561f26241f3e4331f51dc)
	(Trac #1955, git 6f914bb2c388eb4dd3e5c55297f8988ab9529b3f)
	(Trac #1956, git 6f914bb2c388eb4dd3e5c55297f8988ab9529b3f)
	(Trac #1957, git 7fca81716ad3a755bf5744e88c3adeef15b04450)
	(Trac #1958, git 94e17184270cda58f55e6da62e845695117fede3)
	(Trac #1959, git a8cf043db8f44604c7773e047a9dc2861e58462a)
	(Trac #1960, git 6c192e5c0903f349b4d80cf2bb6cd964040ae7da)

Naoki Kambe's avatar
Naoki Kambe committed
935 936 937 938 939 940
478.	[func]		naokikambe
	New statistics items added into b10-xfrout: ixfr_running and
	axfr_running.  Their values can be obtained by invoking "Stats show
	Xfrout" via bindctl while b10-xfrout is running.
	(Trac #2222, git 91311bdbfea95f65c5e8bd8294ba08fac12405f1)

941 942 943 944 945
477.	[bug]		jelte
	Fixed a problem with b10-msgq on OSX when using a custom Python
	installation, that offers an unreliable select.poll() interface.
	(Trac #2190, git e0ffa11d49ab949ee5a4ffe7682b0e6906667baa)

Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
946
476.	[bug]		vorner
Jeremy C. Reed's avatar
Jeremy C. Reed committed
947
	The Xfrin now accepts transfers with some TSIG signatures omitted, as
948 949
	allowed per RFC2845, section 4.4. This solves a compatibility
	issues with Knot and NSD.
Jeremy C. Reed's avatar
Jeremy C. Reed committed
950
	(Trac #1357, git 7ca65cb9ec528118f370142d7e7b792fcc31c9cf)
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
951

Naoki Kambe's avatar
Naoki Kambe committed
952
475.	[func]		naokikambe
953 954 955 956
	Added Xfrout statistics counters: notifyoutv4, notifyoutv6,
	xfrrej, and xfrreqdone. These are per-zone type counters.
	The value of these counters can be seen with zone name by
	invoking "Stats show Xfrout" via bindctl.
957
	(Trac #2158, git e68c127fed52e6034ab5309ddd506da03c37a08a)
958

959
474.	[func]		stephen
960 961 962
	DHCP servers now use the BIND 10 logging system for messages.
	(Trac #1545, git de69a92613b36bd3944cb061e1b7c611c3c85506)

963 964 965 966 967 968
473.	[bug]		jelte
	TCP connections now time out in b10-auth if no (or not all) query
	data is sent by the client. The timeout value defaults to 5000
	milliseconds, but is configurable in Auth/tcp_recv_timeout.
	(Trac #357, git cdf3f04442f8f131542bd1d4a2228a9d0bed12ff)

Jeremy C. Reed's avatar
Jeremy C. Reed committed
969 970 971 972 973 974 975 976 977
472.	[build]		jreed
	All generated documentation is removed from the git repository.
	The ./configure --enable-man option is removed. A new option
	-enable-generate-docs is added; it checks for required
	documentation building dependencies. Dummy documentation is
	built and installed if not used. Distributed tarballs will
	contain the generated documentation.
	(Trac #1687, git 2d4063b1a354f5048ca9dfb195e8e169650f43d0)

978
471.	[bug]		vorner
979 980 981
	Fixed a problem when b10-loadzone tried to tread semicolon
	in string data as start of comment, which caused invalid
	data being loaded.
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
982 983
	(Trac #2188, git 12efec3477feb62d7cbe36bdcfbfc7aa28a36f57)

Naoki Kambe's avatar
Naoki Kambe committed
984
470.	[func]		naokikambe
985 986 987 988 989
	The stats module now supports partial statistics updates. Each
	module can return only statistics data which have been updated since
	the last time it sent them to the stats module. The purpose of partial
	updates is to reduce the amount of statistics data sent through the
	message queue.
Naoki Kambe's avatar
Naoki Kambe committed
990
	(Trac #2179, git d659abdd9f3f369a29830831297f64484ac7b051)
991

992 993 994 995 996 997 998 999 1000 1001 1002
469.	[bug]		jelte
	libdatasrc: the data source client list class now ignores zone
	content problems (such as out-of-zone data) in MasterFiles type
	zones, instead of aborting the entire configuration.  It only logs
	an error, and all other zones and datasources are still loaded. The
	error log message has been improved to include the zone origin and
	source file name.  As a result of this change, b10-auth no longer
	exits upon encountering such errors during startup.
	(Trac #2178, git a75ed413e8a1c8e3702beea4811a46a1bf519bbd)

468.	[func]*		naokikambe, fujiwara
Kazunori Fujiwara's avatar
Kazunori Fujiwara committed
1003
	b10-stats polls the bind10 and b10-auth with new 'getstats' command
1004 1005 1006 1007 1008
	to retrieve statistics data.  The "poll-interval" parameter in
	b10-stats is for configuring the polling interval.  All statistics
	data collected once are preserved while b10-stats is running.
	The "sendstats" command was removed from bind10 and b10-auth. The
	"statistics-interval" configuration item was removed from b10-auth.
1009 1010
	(Trac #2136, git dcb5ce50b4b4e50d28247d5f8b5cb8d90bda942a)
	(Trac #2137, git d53bb65a43f6027b15a6edc08c137951e3ce5e0e)
1011
	(Trac #2138, git b34e3313460eebc9c272ca8c1beb27297c195150)
1012

1013 1014
bind10-devel-20120816 released on August 16, 2012

1015 1016 1017 1018 1019 1020 1021 1022 1023 1024
467.	[bug]		jelte
	For configurations, allow named sets to contain lists of items.
	(Trac #2114, git 712637513505f7afb8434292ca2a98c3517dffd3)

466.	[func]		jelte
	Allow bindctl to add and remove items to and from lists
	and dicts for items of type "any". This is for easier
	configurations.
	(Trac #2184, git ad2d728d1496a9ff59d622077850eed0638b54eb)

1025 1026 1027 1028
465.	[doc]		vorner
	Improved documentation about ACLs in the Guide.
	(Trac #2066, git 76f733925b3f3560cfc2ee96d2a19905b623bfc3)

1029 1030 1031 1032 1033
464.	[func]		jelte, muks
	libdns++: The LabelSequence class has been extended with some new
	methods.  These are mainly intended for internal development, but
	the class is public, so interested users may want to look into the
	extensions.
1034 1035 1036 1037 1038
	(Trac #2052, git 57c61f2^..dbef0e2)
	(Trac #2053, git 1fc2b06b57a008ec602daa2dac79939b3cc6b65d)
	(Trac #2086, git 3fac7d5579c5f51b8e952b50db510b45bfa986f3)
	(Trac #2087, git 49ad6346f574d00cfbd1d12905915fd0dd6a0bac)
	(Trac #2148, git 285c2845ca96e7ef89f9158f1dea8cda147b6566)
1039

Mukund Sivaraman's avatar
Mukund Sivaraman committed
1040 1041 1042 1043
463.	[func]		jinmei
	Python isc.dns: the Name, RRType and RRClass classes are now
	hashable.  So, for example, objects of these classes can be used
	as a dictionary key.
1044
	(Trac #1883, git 93ec40dd0a1df963c676037cc60c066c748b3030)
Mukund Sivaraman's avatar
Mukund Sivaraman committed
1045

Jeremy C. Reed's avatar
Jeremy C. Reed committed
1046
462.	[build]		jreed
Mukund Sivaraman's avatar
Mukund Sivaraman committed
1047 1048 1049 1050 1051
	BIND 10 now compiles against googletest-1.6.0 versions that are
	installed on the system as source code. For such versions, use the
	--with-gtest-source configure switch.
	(Trac #1999, git 6a26d459a40d7eed8ebcff01835377b3394a78de)

Mukund Sivaraman's avatar
Mukund Sivaraman committed
1052
461.	[bug]		muks
1053 1054 1055 1056
	We now set g+w and g+s permissions (mode 02770) during
	installation for the BIND 10 local state directory
	($prefix/var/bind10-devel/) so that permissions to files
	and sub-directories created in that directory are inherited.
Mukund Sivaraman's avatar
Mukund Sivaraman committed
1057 1058
	(Trac #2171, git ab4d20907abdb3ce972172463dcc73405b3dee79)

Mukund Sivaraman's avatar
Mukund Sivaraman committed
1059 1060 1061
460.	[bug]		muks
	SSHFP's algorithm and fingerprint type checks have been relaxed
	such that they will accept any values in [0,255]. This is so that
Jeremy C. Reed's avatar
Jeremy C. Reed committed
1062
	future algorithm and fingerprint types are accommodated.
Mukund Sivaraman's avatar
Mukund Sivaraman committed
1063 1064
	(Trac #2124, git 49e6644811a7ad09e1326f20dd73ab43116dfd21)

1065
459.	[func]		tomek
1066
	b10-dhcp6: DHCPv6 server component is now integrated into
1067
	BIND 10 framework. It can be started from BIND 10 (using bindctl)
1068 1069 1070 1071
	and can receive commands. The only supported command for now
	is 'Dhcp6 shutdown'.
	b10-dhcp4: Command line-switch '-s' to disable msgq was added.
	b10-dhcp6: Command line-switch '-s' to disable msgq was added.
Tomek Mrugalski's avatar
Tomek Mrugalski committed
1072
	(Trac #1708, git e0d7c52a71414f4de1361b09d3c70431c96daa3f)
Kazunori Fujiwara's avatar
Kazunori Fujiwara committed
1073

1074
458.	[build]*		jinmei
JINMEI Tatuya's avatar
JINMEI Tatuya committed
1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086
	BIND 10 now relies on Boost offset_ptr, which caused some new
	portability issues.  Such issues are detected at ./configure time.
	If ./configure stops due to this, try the following workaround:
	- If it's about the use of mutable for a reference with clang++,
	  upgrade Boost version to 1.44 or higher, or try a different
	  compiler (e.g. g++ generally seems to be free from this issue)
	- If it's about the use of "variadic templates", specify
	  --without-werror so the warning won't be promoted to an error.
	  Specifying BOOST_NO_USER_CONFIG in CXXFLAGS may also work
	  (which would be the case if Boost is installed via pkgsrc)
	(Trac #2147, git 30061d1139aad8716e97d6b620c259752fd0a3cd)

1087
457.	[build]*		muks
Mukund Sivaraman's avatar
Mukund Sivaraman committed
1088 1089 1090 1091
	BIND 10 library names now have a "b10-" prefix. This is to avoid
	clashes with other similarly named libraries on the system.
	(Trac #2071, git ac20a00c28069804edc0a36050995df52f601efb)

1092
456.	[build]		muks
Mukund Sivaraman's avatar
Mukund Sivaraman committed
1093
	BIND 10 now compiles against log4cplus-1.1.0 (RC releases)
1094 1095 1096
	also.  Note: some older versions of log4cplus don't work any more;
	known oldest workable version is 1.0.4.  Thanks to John Lumby for
	sending a patch.
Mukund Sivaraman's avatar
Mukund Sivaraman committed
1097 1098
	(Trac #2169, git 7d7e5269d57451191c0aef1b127d292d3615fe2c)

Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
1099
455.	[func]*		vorner
1100 1101 1102
	The server now uses newer API for data sources. This would be an
	internal change, however, the data sources are now configured
	differently. Please, migrate your configuration to the top-level
1103 1104
	"data_sources" module.  Also the bind10 -n and --no-cache
	and b10-auth -n options are removed.
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
1105 1106
	(Trac #1976, git 0d4685b3e7603585afde1b587cbfefdfaf6a1bb3)

1107 1108 1109 1110 1111 1112 1113
454.	[bug]		jelte
	b10-cfgmgr now loads its configuration check plugins directly from
	the plugin search path, as opposed to importing them from the
	general python system module path list; this prevents naming
	conflicts with real python modules.
	(Trac #2119, git 2f68d7ac5c3c7cc88a3663191113eece32d46a3d)

1114 1115 1116 1117 1118 1119 1120
453.	[bug]		jelte
	b10-auth no longer tries to send DDNS UPDATE messages to b10-ddns if
	b10-ddns is not running. Sending an UPDATE to BIND 10 that is not
	configured to run DDNS will now result in a response with rcode
	NOTIMP instead of SERVFAIL.
	(Trac #1986, git bd6b0a5ed3481f78fb4e5cb0b18c7b6e5920f9f8)

1121 1122 1123 1124 1125 1126 1127 1128
452.	[func]		muks, jelte
	isc-sysinfo: An initial implementation of the isc-sysinfo
	tool is now available for Linux, OpenBSD, FreeBSD, and Mac
	OS X. It gathers and outputs system information which can
	be used by future tech support staff. This includes a
	generic Python "sysinfo" module.
	(Trac #2062, #2121, #2122, #2172,
	git 144e80212746f8d55e6a59edcf689fec9f32ae95)
Mukund Sivaraman's avatar
Mukund Sivaraman committed
1129

JINMEI Tatuya's avatar
JINMEI Tatuya committed
1130 1131 1132 1133 1134 1135 1136 1137
451.	[bug]		muks, jinmei
	libdatasrc: the database-based data source now correctly returns
	glue records on (not under) a zone cut, such as in the case where
	the NS name of an NS record is identical to its owner name. (Note:
	libdatasrc itself doesn't judge what kind of record type can be a
	"glue"; it's the caller's responsibility.)
	(Trac #1771, git 483f1075942965f0340291e7ff7dae7806df22af)

1138
450.	[func]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
1139
	b10-dhcp4: DHCPv4 server component is now integrated into
1140
	BIND 10 framework. It can be started from BIND 10 (using bindctl)
Tomek Mrugalski's avatar
Tomek Mrugalski committed
1141 1142
	and can receive commands. The only supported command for now
	is 'Dhcp4 shutdown'.
1143
	(Trac #1651, git 7e16a5a50d3311e63d10a224ec6ebcab5f25f62c)
Tomek Mrugalski's avatar
Tomek Mrugalski committed
1144

Jeremy C. Reed's avatar
Jeremy C. Reed committed
1145
bind10-devel-20120621 released on June 21, 2012
1146

1147 1148 1149
449.	[bug]		muks
	b10-xfin: fixed a bug where xfrin sent the wrong notification
	message to zonemgr on successful zone transfer. This also
Jeremy C. Reed's avatar
Jeremy C. Reed committed
1150
	solves other reported problems such as too frequent attempts
1151 1152 1153
	of zone refreshing (see Trac #1786 and #1834).
	(Trac #2023, git b5fbf8a408a047a2552e89ef435a609f5df58d8c)

1154 1155 1156 1157 1158 1159
448.	[func]		team
	b10-ddns is now functional and handles dynamic update requests
	per RFC 2136.  See BIND 10 guide for configuration and operation
	details.
	(Multiple Trac tickets)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
1160 1161 1162 1163
447.	[bug]		jinmei
	Fixed a bug in b10-xfrout where a helper thread could fall into
	an infinite loop if b10-auth stops while the thread is waiting for
	forwarded requests from b10-auth.
1164
	(Trac #988 and #1833, git 95a03bbefb559615f3f6e529d408b749964d390a)
JINMEI Tatuya's avatar
JINMEI Tatuya committed
1165

Mukund Sivaraman's avatar
Mukund Sivaraman committed
1166 1167 1168 1169 1170
446.	[bug]		muks
	A number of warnings reported by Python about unclosed file and
	socket objects were fixed. Some related code was also made safer.
	(Trac #1828, git 464682a2180c672f1ed12d8a56fd0a5ab3eb96ed)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
1171 1172 1173 1174 1175 1176 1177
445.	[bug]*		jinmei
	The pre-install check for older SQLite3 DB now refers to the DB
	file with the prefix of DESTDIR.  This ensures that 'make install'
	with specific DESTDIR works regardless of the version of the DB
	file installed in the default path.
	(Trac #1982, git 380b3e8ec02ef45555c0113ee19329fe80539f71)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
1178 1179 1180 1181 1182 1183
444.	[bug]		jinmei
	libdatasrc: fixed ZoneFinder for database-based data sources so
	that it handles type DS query correctly, i.e., treating it as
	authoritative data even on a delegation point.
	(Trac #1912, git 7130da883f823ce837c10cbf6e216a15e1996e5d)

1184
443.	[func]*		muks
Mukund Sivaraman's avatar
Mukund Sivaraman committed
1185 1186 1187 1188 1189 1190 1191 1192 1193 1194
	The logger now uses a lockfile named `logger_lockfile' that is
	created in the local state directory to mutually separate
	individual logging operations from various processes. This is
	done so that log messages from different processes don't mix
	together in the middle of lines. The `logger_lockfile` is created
	with file permission mode 0660. BIND 10's local state directory
	should be writable and perhaps have g+s mode bit so that the
	`logger_lockfile` can be opened by a group of processes.
	(Trac #1704, git ad8d445dd0ba208107eb239405166c5c2070bd8b)

Tomek Mrugalski's avatar
Tomek Mrugalski committed
1195
442.	[func]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
1196 1197 1198
	b10-dhcp4, b10-dhcp6: Both DHCP servers now accept -p parameter
	that can be used to specify listening port number. This capability
	is useful only for testing purposes.
Tomek Mrugalski's avatar
Tomek Mrugalski committed
1199 1200
	(Trac #1503, git e60af9fa16a6094d2204f27c40a648fae313bdae)

1201
441.	[func]		tomek
1202 1203
	libdhcp++: Stub interface detection (support for interfaces.txt
	file) was removed.
1204
	(Trac #1281, git 900fc8b420789a8c636bcf20fdaffc60bc1041e0)
1205

Jeremy C. Reed's avatar
Jeremy C. Reed committed
1206
bind10-devel-20120517 released on May 17, 2012
1207

Jeremy C. Reed's avatar
Jeremy C. Reed committed
1208 1209 1210 1211 1212 1213
440.	[func]		muks
	bindctl: improved some error messages so they will be more
	helpful.  Those include the one when the zone name is unspecified
	or the name is invalid in the b10-auth configuration.
	(Trac #1627, git 1a4d0ae65b2c1012611f4c15c5e7a29d65339104)

1214
439.	[func]		team
1215 1216 1217 1218 1219 1220
	The in-memory data source can now load zones from the
	sqlite3 data source, so that zones stored in the database
	(and updated for example by xfrin) can be served from memory.
	(Trac #1789,#1790,#1792,#1793,#1911,
	git 93f11d2a96ce4dba9308889bdb9be6be4a765b27)

1221
438.	[bug]		naokikambe
1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234
	b10-stats-httpd now sends the system a notification that
	it is shutting down if it encounters a fatal error during
	startup.
	(Trac #1852, git a475ef271d4606f791e5ed88d9b8eb8ed8c90ce6)

437.	[build]		jinmei
	Building BIND 10 may fail on MacOS if Python has been
	installed via Homebrew unless --without-werror is specified.
	The configure script now includes a URL that explains this
	issue when it detects failure that is possibly because of
	this problem.
	(Trac #1907, git 0d03b06138e080cc0391fb912a5a5e75f0f97cec)

1235 1236 1237 1238 1239
436.	[bug]		jelte
	The --config-file option now works correctly with relative paths if
	--data-path is not given.
	(Trac #1889, git ce7d1aef2ca88084e4dacef97132337dd3e50d6c)

1240 1241 1242 1243
435.	[func]		team
	The in-memory datasource now supports NSEC-signed zones.
	(Trac #1802-#1810, git 2f9aa4a553a05aa1d9eac06f1140d78f0c99408b)

1244
434.	[func]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
1245 1246
	libdhcp++: Linux interface detection refactored. The code is
	now cleaner. Tests better support certain versions of ifconfig.
1247
	(Trac #1528, git 221f5649496821d19a40863e53e72685524b9ab2)
Tomek Mrugalski's avatar
Tomek Mrugalski committed
1248

1249
433.	[func]		tomek
1250 1251 1252
	libdhcp++: Option6 and Pkt6 now follow the same design as
	options and packet for DHCPv4. General code refactoring after
	end of 2011 year release.
1253
	(Trac #1540, git a40b6c665617125eeb8716b12d92d806f0342396)
1254

Mukund Sivaraman's avatar
Mukund Sivaraman committed
1255 1256 1257 1258 1259
432.	[bug]*		muks
	BIND 10 now installs its header files in a BIND 10 specific
	sub-directory in the install prefix.
	(Trac #1930, git fcf2f08db9ebc2198236bfa25cf73286821cba6b)

1260
431.	[func]*		muks
Mukund Sivaraman's avatar
Mukund Sivaraman committed
1261 1262 1263
	BIND 10 no longer starts b10-stats-httpd by default.
	(Trac #1885, git 5c8bbd7ab648b6b7c48e366e7510dedca5386f6c)

1264 1265 1266 1267 1268
430.	[bug]		jelte
	When displaying configuration data, bindctl no longer treats
	optional list items as an error, but shows them as an empty list.
	(Trac #1520, git 0f18039bc751a8f498c1f832196e2ecc7b997b2a)

1269 1270 1271 1272 1273 1274 1275
429.	[func]		jelte
	Added an 'execute' component to bindctl, which executes either a set
	of commands from a file or a built-in set of commands. Currently,
	only 'init_authoritative_server' is provided as a built-in set, but
	it is expected that more will be added later.
	(Trac #1843, git 551657702a4197ef302c567b5c0eaf2fded3e121)

1276
428.	[bug]		marcin
Jeremy C. Reed's avatar
Jeremy C. Reed committed
1277