ChangeLog

443.    [func]*		muks
	The logger now uses a lockfile named `logger_lockfile' that is
	created in the local state directory to mutually separate
	individual logging operations from various processes. This is
	done so that log messages from different processes don't mix
	together in the middle of lines. The `logger_lockfile` is created
	with file permission mode 0660. BIND 10's local state directory
	should be writable and perhaps have g+s mode bit so that the
	`logger_lockfile` can be opened by a group of processes.
	(Trac #1704, git ad8d445dd0ba208107eb239405166c5c2070bd8b)

442.	[func]		tomek
	b10-dhcp4, b10-dhcp6: Both DHCP servers now accept -p parameter
	that can be used to specify listening port number. This capability
	is useful only for testing purposes.
	(Trac #1503, git e60af9fa16a6094d2204f27c40a648fae313bdae)

441.	[func]		tomek
	libdhcp++: Stub interface detection (support for interfaces.txt
	file) was removed.
	(Trac #1281, git 900fc8b420789a8c636bcf20fdaffc60bc1041e0)

bind10-devel-20120517 released on May 17. 2012

440.	[func]		muks
	bindctl: improved some error messages so they will be more
	helpful.  Those include the one when the zone name is unspecified
	or the name is invalid in the b10-auth configuration.
	(Trac #1627, git 1a4d0ae65b2c1012611f4c15c5e7a29d65339104)

439.	[func]		team
	The in-memory data source can now load zones from the
	sqlite3 data source, so that zones stored in the database
	(and updated for example by xfrin) can be served from memory.
	(Trac #1789,#1790,#1792,#1793,#1911,
	git 93f11d2a96ce4dba9308889bdb9be6be4a765b27)

438.	[bug]		naokikambe
	b10-stats-httpd now sends the system a notification that
	it is shutting down if it encounters a fatal error during
	startup.
	(Trac #1852, git a475ef271d4606f791e5ed88d9b8eb8ed8c90ce6)

437.	[build]		jinmei
	Building BIND 10 may fail on MacOS if Python has been
	installed via Homebrew unless --without-werror is specified.
	The configure script now includes a URL that explains this
	issue when it detects failure that is possibly because of
	this problem.
	(Trac #1907, git 0d03b06138e080cc0391fb912a5a5e75f0f97cec)

436.	[bug]		jelte
	The --config-file option now works correctly with relative paths if
	--data-path is not given.
	(Trac #1889, git ce7d1aef2ca88084e4dacef97132337dd3e50d6c)

435.	[func]		team
	The in-memory datasource now supports NSEC-signed zones.
	(Trac #1802-#1810, git 2f9aa4a553a05aa1d9eac06f1140d78f0c99408b)

434.	[func]		tomek
	libdhcp++: Linux interface detection refactored. The code is
	now cleaner. Tests better support certain versions of ifconfig.
	(Trac #1528, git 221f5649496821d19a40863e53e72685524b9ab2)

433.	[func]		tomek
	libdhcp++: Option6 and Pkt6 now follow the same design as
	options and packet for DHCPv4. General code refactoring after
	end of 2011 year release.
	(Trac #1540, git a40b6c665617125eeb8716b12d92d806f0342396)

432.	[bug]*		muks
	BIND 10 now installs its header files in a BIND 10 specific
	sub-directory in the install prefix.
	(Trac #1930, git fcf2f08db9ebc2198236bfa25cf73286821cba6b)

431.	[func]*		muks
	BIND 10 no longer starts b10-stats-httpd by default.
	(Trac #1885, git 5c8bbd7ab648b6b7c48e366e7510dedca5386f6c)

430.	[bug]		jelte
	When displaying configuration data, bindctl no longer treats
	optional list items as an error, but shows them as an empty list.
	(Trac #1520, git 0f18039bc751a8f498c1f832196e2ecc7b997b2a)

429.	[func]		jelte
	Added an 'execute' component to bindctl, which executes either a set
	of commands from a file or a built-in set of commands. Currently,
	only 'init_authoritative_server' is provided as a built-in set, but
	it is expected that more will be added later.
	(Trac #1843, git 551657702a4197ef302c567b5c0eaf2fded3e121)

428.	[bug]		marcin
	perfdhcp: bind to local address to allow reception of
	replies from IPv6 DHCP servers.
	(Trac #1908, git 597e059afaa4a89e767f8f10d2a4d78223af3940)

427.	[bug]		jinmei
	libdatasrc, b10-xfrin: the zone updater for database-based data
	sources now correctly distinguishes NSEC3-related RRs (NSEC3 and
	NSEC3-covering RRSIG) from others, and the SQLite3 implementation
	now manipulates them in the separate table for the NSEC3 namespace.
	As a result b10-xfrin now correctly updates NSEC3-signed zones by
	inbound zone transfers.
	(Trac #1781,#1788,#1891, git 672f129700dae33b701bb02069cf276238d66be3)

426.	[bug]		vorner
	The NSEC3 records are now included when transferring a
	signed zone out.
	(Trac #1782, git 36efa7d10ecc4efd39d2ce4dfffa0cbdeffa74b0)

425.	[func]*		muks
	Don't autostart b10-auth, b10-xfrin, b10-xfrout and b10-zonemgr in
	the default configuration.
	(Trac #1818, git 31de885ba0409f54d9a1615eff5a4b03ed420393)

424.	[bug]		jelte
	Fixed a bug in bindctl where in some cases, configuration settings
	in a named set could disappear, if a child element is modified.
	(Trac #1491, git 00a36e752802df3cc683023d256687bf222e256a)

423.	[bug]		jinmei
	The database based zone iterator now correctly resets mixed TTLs
	of the same RRset (when that happens) to the lowest one.  The
	previous implementation could miss lower ones if it appears in a
	later part of the RRset.
	(part of Trac #1791, git f1f0bc00441057e7050241415ee0367a09c35032)

422.	[bug]		jinmei
	The database based zone iterator now separates RRSIGs of the same
	name and type but for different covered types.
	(part of Trac #1791, git b4466188150a50872bc3c426242bc7bba4c5f38d)

421.	[build]		jinmei
	Made sure BIND 10 can be built with clang++ 3.1.  (It failed on
	MacOS 10.7 using Xcode 4.3, but it's more likely to be a matter of
	clang version.)
	(Trac #1773, git ceaa247d89ac7d97594572bc17f005144c5efb8d)

420.	[bug]*		jinmei, stephen
	Updated the DB schema used in the SQLite3 data source so it can
	use SQL indices more effectively.  The previous schema had several
	issues in this sense and could be very slow for some queries on a
	very large zone (especially for negative answers).  This change
	requires a major version up of the schema; use b10-dbutil to
	upgrade existing database files.  Note: 'make install' will fail
	unless old DB files installed in the standard location have been
	upgraded.
	(Trac #324, git 8644866497053f91ada4e99abe444d7876ed00ff)

419.	[bug]		jelte
	JSON handler has been improved; escaping now works correctly
	(including quotes in strings), and it now rejects more types of
	malformed input.
	(Trac #1626, git 3b09268518e4e90032218083bcfebf7821be7bd5)

418.	[bug]		vorner
	Fixed crash in bindctl when config unset was called.
	(Trac #1715, git 098da24dddad497810aa2787f54126488bb1095c)

417.	[bug]		jelte
	The notify-out code now looks up notify targets in their correct
	zones (and no longer just in the zone that the notify is about).
	(Trac #1535, git 66300a3c4769a48b765f70e2d0dbf8bbb714435b)

416.	[func]*		jelte
	The implementations of ZoneFinder::find() now throw an OutOfZone
	exception when the name argument is not in or below the zone this
	zonefinder contains.
	(Trac #1535, git 66300a3c4769a48b765f70e2d0dbf8bbb714435b)

bind10-devel-20120329 released on March 29, 2012

415.	[doc]		jinmei, jreed
	BIND 10 Guide updated to now describe the in-memory data source
	configurations for b10-auth.
	(Trac #1732, git 434d8db8dfcd23a87b8e798e5702e91f0bbbdcf6)

414.	[bug]		jinmei
	b10-auth now correctly handles delegation from an unsigned zone
	(defined in the in-memory data source) when the query has DNSSEC
	DO bit on.  It previously returned SERVFAIL.
	(Trac #1836, git 78bb8f4b9676d6345f3fdd1e5cc89039806a9aba)

413.	[func]		stephen, jelte
	Created a new tool b10-dbutil, that can check and upgrade database
	schemas, to be used when incompatible changes are introduced in the
	backend database schema. Currently it only supports sqlite3 databases.
	Note: there's no schema change that requires this utility as of
	the March 29th release.  While running it shouldn't break
	an existing database file, it should be even more advisable not to
	run it at the moment.
	(Trac #963, git 49ba2cf8ac63246f389ab5e8ea3b3d081dba9adf)

412.	[func]		jelte
	Added a command-line option '--clear-config' to bind10, which causes
	the system to create a backup of the existing configuration database
	file, and start out with a clean default configuration. This can be
	used if the configuration file is corrupted to the point where it
	cannot be read anymore, and BIND 10 refuses to start. The name of
	the backup file can be found in the logs (CFGMGR_RENAMED_CONFIG_FILE).
	(Trac #1443, git 52b36c921ee59ec69deefb6123cbdb1b91dc3bc7)

411.	[func]		muks
	Add a -i/--no-kill command-line argument to bind10, which stops
	it from sending SIGTERM and SIGKILL to other b10 processes when
	they're shutting down.
	(Trac #1819, git 774554f46b20ca5ec2ef6c6d5e608114f14e2102)

410.	[bug]		jinmei
	Python CC library now ensures write operations transmit all given
	data (unless an error happens).  Previously it didn't check the
	size of transmitted data, which could result in partial write on
	some systems (notably on OpenBSD) and subsequently cause system
	hang up or other broken state.  This fix specifically solves start
	up failure on OpenBSD.
	(Trac #1829, git 5e5a33213b60d89e146cd5e47d65f3f9833a9297)

409.	[bug]		jelte
	Fixed a parser bug in bindctl that could make bindctl crash. Also
	improved 'command help' output; argument order is now shown
	correctly, and parameter descriptions are shown as well.
	(Trac #1172, git bec26c6137c9b0a59a3a8ca0f55a17cfcb8a23de)

408.	[bug]		stephen, jinmei
	b10-auth now filters out duplicate RRsets when building a
	response message using the new query handling logic.  It's
	currently only used with the in-memory data source, but will
	also be used for others soon.
	(Trac #1688, git b77baca56ffb1b9016698c00ae0a1496d603d197)

407.	[build]		haikuo
	Remove "--enable-boost-threads" switch in configure command. This
	thread lock mechanism is useless for bind10 and causes performance 
	hits. 
	(Trac #1680, git 9c4d0cadf4adc802cc41a2610dc2c30b25aad728)

406.	[bug]		muks
	On platforms such as OpenBSD where pselect() is not available,
	make a wrapper around select() in perfdhcp.
	(Trac #1639, git 6ea0b1d62e7b8b6596209291aa6c8b34b8e73191)

405.	[bug]		jinmei
	Make sure disabling Boost threads if the default configuration is
	to disable it for the system.  This fixes a crash and hang up
	problem on OpenBSD, where the use of Boost thread could be
	different in different program files depending on the order of
	including various header files, and could introduce inconsistent
	states between a library and a program.  Explicitly forcing the
	original default throughout the BIND 10 build environment will
	prevent this from happening.
	(Trac #1727, git 23f9c3670b544c5f8105958ff148aeba050bc1b4)

404.	[bug]		naokikambe
	The statistic counters are now properly accumulated across multiple
	instances of b10-auth (if there are multiple instances), instead of
	providing result for random instance.
	(Trac #1751, git 3285353a660e881ec2b645e1bc10d94e5020f357)

403.	[build]*		jelte
	The configure option for botan (--with-botan=PATH) is replaced by
	--with-botan-config=PATH, which takes a full path to a botan-config
	script, instead of the botan 'install' directory. Also, if not
	provided, configure will try out config scripts and pkg-config
	options until it finds one that works.
	(Trac #1640, git 582bcd66dbd8d39f48aef952902f797260280637)

402.	[func]		jelte
	b10-xfrout now has a visible command to send out notifies for
	a given zone, callable from bindctl. Xfrout notify <zone> [class]
	(Trac #1321, git 0bb258f8610620191d75cfd5d2308b6fc558c280)

401.	[func]*		jinmei
	libdns++: updated the internal implementation of the
	MessageRenderer class.  This is mostly a transparent change, but
	the new version now doesn't allow changing compression mode in the
	middle of rendering (which shouldn't be an issue in practice).
	On the other hand, name compression performance was significantly
	improved: depending on the number of names, micro benchmark tests
	showed the new version is several times faster than the previous
	version .
	(Trac #1603, git 9a2a86f3f47b60ff017ce1a040941d0c145cfe16)

400.	[bug]		stephen
	Fix crash on Max OS X 10.7 by altering logging so as not to allocate
	heap storage in the static initialization of logging objects.
	(Trac #1698, git a8e53be7039ad50d8587c0972244029ff3533b6e)

399.	[func]		muks
	Add support for the SSHFP RR type (RFC 4255).
	(Trac #1136, git ea5ac57d508a17611cfae9d9ea1c238f59d52c51)

398.	[func]		jelte
	The b10-xfrin module now logs more information on successful
	incoming transfers. In the case of IXFR, it logs the number of
	changesets, and the total number of added and deleted resource
	records. For AXFR (or AXFR-style IXFR), it logs the number of
	resource records. In both cases, the number of overhead DNS
	messages, runtime, amount of wire data, and transfer speed are logged.
	(Trac #1280, git 2b01d944b6a137f95d47673ea8367315289c205d)

397.	[func]		muks
	The boss process now gives more helpful description when a
	sub-process exits due to a signal.
	(Trac #1673, git 1cd0d0e4fc9324bbe7f8593478e2396d06337b1e)

396.	[func]*		jinmei
	libdatasrc: change the return type of ZoneFinder::find() so it can
	contain more context of the search, which can be used for
	optimizing post find() processing.  A new method getAdditional()
	is added to it for finding additional RRsets based on the result
	of find().  External behavior shouldn't change.  The query
	handling code of b10-auth now uses the new interface.
	(Trac #1607, git 2e940ea65d5b9f371c26352afd9e66719c38a6b9)

395.	[bug]		jelte
	The log message compiler now errors (resulting in build failures) if
	duplicate log message identifiers are found in a single message file.
	Renamed one duplicate that was found (RESOLVER_SHUTDOWN, renamed to
	RESOLVER_SHUTDOWN_RECEIVED).
	(Trac #1093, git f537c7e12fb7b25801408f93132ed33410edae76)
	(Trac #1741, git b8960ab85c717fe70ad282e0052ac0858c5b57f7)

394.	[bug]		jelte
	b10-auth now catches any exceptions during response building; if any
	datasource either throws an exception or causes an exception to be
	thrown, the message processing code will now catch it, log a debug
	message, and return a SERVFAIL response.
	(Trac #1612, git b5740c6b3962a55e46325b3c8b14c9d64cf0d845)

393.	[func]		jelte
	Introduced a new class LabelSequence in libdns++, which provides
	lightweight accessor functionality to the Name class, for more
	efficient comparison of parts of names.
	(Trac #1602, git b33929ed5df7c8f482d095e96e667d4a03180c78)

392.	[func]*		jinmei
	libdns++: revised the (Abstract)MessageRenderer class so that it
	has a default internal buffer and the buffer can be temporarily
	switched.  The constructor interface was modified, and a new
	method setBuffer() was added.
	(Trac #1697, git 9cabc799f2bf9a3579dae7f1f5d5467c8bb1aa40)

391.	[bug]*		vorner
	The long time unused configuration options of Xfrout "log_name",
	"log_file", "log_severity", "log_version" and "log_max_bytes" were
	removed, as they had no effect (Xfrout uses the global logging
	framework).  However, if you have them set, you need to remove
	them from the configuration file or the configuration will be
	rejected.
	(Trac #1090, git ef1eba02e4cf550e48e7318702cff6d67c1ec82e)

bind10-devel-20120301 released on March 1, 2012

390.	[bug]		vorner
	The UDP IPv6 packets are now correctly fragmented for maximum
	guaranteed MTU, so they won't get lost because being too large
	for some hop.
	(Trac #1534, git ff013364643f9bfa736b2d23fec39ac35872d6ad)

389.	[func]*		vorner
	Xfrout now uses the global TSIG keyring, instead of its own. This
	means the keys need to be set only once (in tsig_keys/keys).
	However, the old configuration of Xfrout/tsig_keys need to be
	removed for Xfrout to work.
	(Trac #1643, git 5a7953933a49a0ddd4ee1feaddc908cd2285522d)

388.	[func]		jreed
	Use prefix "sockcreator-" for the private temporary directory
	used for b10-sockcreator communication.
	(git b98523c1260637cb33436964dc18e9763622a242)

387.	[build]		muks
	Accept a --without-werror configure switch so that some builders can
	disable the use of -Werror in CFLAGS when building.
	(Trac #1671, git 8684a411d7718a71ad9fb616f56b26436c4f03e5)

386.	[bug]		jelte
	Upon initial sqlite3 database creation, the 'diffs' table is now
	always created. This already happened most of the time, but there
	are a few cases where it was skipped, resulting in potential errors
	in xfrout later.
	(Trac #1717, git 30d7686cb6e2fa64866c983e0cfb7b8fabedc7a2)

385.	[bug]		jinmei
	libdns++: masterLoad() didn't accept comments placed at the end of
	an RR.  Due to this the in-memory data source cannot load a master
	file for a signed zone even if it's preprocessed with BIND 9's
	named-compilezone.
	Note: this fix is considered temporary and still only accepts some
	limited form of such comments.  The main purpose is to allow the
	in-memory data source to load any signed or unsigned zone files as
	long as they are at least normalized with named-compilezone.
	(Trac #1667, git 6f771b28eea25c693fe93a0e2379af924464a562)

384.	[func]		jinmei, jelte, vorner, haikuo, kevin
	b10-auth now supports NSEC3-signed zones in the in-memory data
	source.
	(Trac #1580, #1581, #1582, #1583, #1584, #1585, #1587, and
	other related changes to the in-memory data source)

383.	[build]		jinmei
	Fixed build failure on MacOS 10.7 (Lion) due to the use of
	IPV6_PKTINFO; the OS requires a special definition to make it
	visible to the compiler.
	(Trac #1633, git 19ba70c7cc3da462c70e8c4f74b321b8daad0100)

382.	[func]		jelte
	b10-auth now also experimentally supports statistics counters of
	the rcode responses it sends. The counters can be shown as
	rcode.<code name>, where code name is the lowercase textual
	representation of the rcode (e.g. "noerror", "formerr", etc.).
	Same note applies as for opcodes, see changelog entry 364.
	(Trac #1613, git e98da500d7b02e11347431a74f2efce5a7d622aa)

381.	[bug]		jinmei
	b10-auth: honor the DNSSEC DO bit in the new query handler.
	(Trac #1695, git 61f4da5053c6a79fbc162fb16f195cdf8f94df64)

380.	[bug]		jinmei
	libdns++: miscellaneous bug fixes for the NSECPARAM RDATA
	implementation, including incorrect handling for empty salt and
	incorrect comparison logic.
	(Trac #1638, git 966c129cc3c538841421f1e554167d33ef9bdf25)

379.	[bug]		jelte
	Configuration commands in bindctl now check for list indices if
	the 'identifier' argument points to a child element of a list
	item. Previously, it was possible to 'get' non-existent values
	by leaving out the index, e.g. "config show Auth/listen_on/port,
	which should be config show Auth/listen_on[<index>]/port, since
	Auth/listen_on is a list. The command without an index will now
	show an error. It is still possible to show/set the entire list
	("config show Auth/listen_on").
	(Trac #1649, git 003ca8597c8d0eb558b1819dbee203fda346ba77)

378.	[func]		vorner
	It is possible to start authoritative server or resolver in multiple
	instances, to use more than one core. Configuration is described in
	the guide.
	(Trac #1596, git 17f7af0d8a42a0a67a2aade5bc269533efeb840a)

377.	[bug]		jinmei
	libdns++: miscellaneous bug fixes for the NSEC and NSEC3 RDATA
	implementation, including a crash in NSEC3::toText() for some RR
	types, incorrect handling of empty NSEC3 salt, and incorrect
	comparison logic in NSEC3::compare().
	(Trac #1641, git 28ba8bd71ae4d100cb250fd8d99d80a17a6323a2)

376.	[bug]		jinmei, vorner
	The new query handling module of b10-auth did not handle type DS
	query correctly: It didn't look for it in the parent zone, and
	it incorrectly returned a DS from the child zone if it
	happened to exist there.  Both were corrected, and it now also
	handles the case of having authority for the child and a grand
	ancestor.
	(Trac #1570, git 2858b2098a10a8cc2d34bf87463ace0629d3670e)

375.	[func]		jelte
	Modules now inform the system when they are stopping. As a result,
	they are removed from the 'active modules' list in bindctl, which
	can then inform the user directly when it tries to send them a
	command or configuration update.  Previously this would result
	in a 'not responding' error instead of 'not running'.
	(Trac #640, git 17e78fa1bb1227340aa9815e91ed5c50d174425d)

374.	[func]*		stephen
	Alter RRsetPtr and ConstRRsetPtr to point to AbstractRRset (instead
	of RRset) to allow for specialised implementations of RRsets in
	data sources.
	(Trac #1604, git 3071211d2c537150a691120b0a5ce2b18d010239)

373.	[bug]		jinmei
	libdatasrc: the in-memory data source incorrectly rejected loading
	a zone containing a CNAME RR with RRSIG and/or NSEC.
	(Trac #1551, git 76f823d42af55ce3f30a0d741fc9297c211d8b38)

372.	[func]		vorner
	When the allocation of a socket fails for a different reason than the
	socket not being provided by the OS, the b10-auth and b10-resolver
	abort, as the system might be in inconsistent state after such error.
	(Trac #1543, git 49ac4659f15c443e483922bf9c4f2de982bae25d)

371.	[bug]		jelte
	The new query handling module of b10-auth (currently only used with
	the in-memory data source) now correctly includes the DS record (or
	the denial of its existence if NSEC is used) when returning a
	delegation from a signed zone.
	(Trac #1573, git bd7a3ac98177573263950303d4b2ea7400781d0f)

370.	[func]		jinmei
	libdns++: a new class NSEC3Hash was introduced as a utility for
	calculating NSEC3 hashes for various purposes.  Python binding was
	provided, too.  Also fixed a small bug in the NSEC3PARAM RDATA
	implementation that empty salt in text representation was
	rejected.
	(Trac #1575, git 2c421b58e810028b303d328e4e2f5b74ea124839)

369.	[func]		vorner
	The SocketRequestor provides more information about what error
	happened when it throws, by using subclasses of the original
	exception. This way a user not interested in the difference can
	still use the original exception, while it can be recognized if
	necessary.
	(Trac #1542, git 2080e0316a339fa3cadea00e10b1ec4bc322ada0)

368.	[func]*		jinmei
	libdatasrc: the interface of ZoneFinder() was changed: WILDCARD
	related result codes were deprecated and removed, and the
	corresponding information is now provided via a separate accessor
	method on FindResult.  Other separate FindResult methods will
	also tell the caller whether the zone is signed with NSEC or NSEC3
	(when necessary and applicable).
	(Trac #1611, git c175c9c06034b4118e0dfdbccd532c2ebd4ba7e8)

367.	[bug]		jinmei
	libdatasrc: in-memory data source could incorrectly reject to load
	zones containing RRSIG records.  For example, it didn't allow
	RRSIG that covers a CNAME RR.  This fix also makes sure find()
	will return RRsets with RRSIGs if they are signed.
	(Trac #1614, git e8241ea5a4adea1b42a60ee7f2c5cfb87301734c)

366.	[bug]		vorner
	Fixed problem where a directory named "io" conflicted with the python3
	standard module "io" and caused the installation to fail.  The
	offending directory has been renamed to "cio".
	(Trac #1561, git d81cf24b9e37773ba9a0d5061c779834ff7d62b9)

365.	[bug]		jinmei
	libdatasrc: in-memory datasource incorrectly returned delegation
	for DS lookups.
	(Trac #1571, git d22e90b5ef94880183cd652e112399b3efb9bd67)

364.	[func]		jinmei
	b10-auth experimentally supports statistics counters of incoming
	requests per opcode.  The counters can be (e.g.) shown as
	opcode.<code name> in the output of the bindctl "Stats show"
	command, where <code name> is lower-cased textual representation
	of opcodes ("query", "notify", etc).
	Note: This is an experimental attempt of supporting more
	statistics counters for b10-auth, and the interface and output may
	change in future versions.
	(Trac #1399, git 07206ec76e2834de35f2e1304a274865f8f8c1a5)

bind10-devel-20120119 released on January 19, 2012

363.	[func]		jelte
	Added dummy DDNS module b10-ddns. Currently it does not
	provide any functionality, but it is a skeleton implementation
	that will be expanded later.
	(Trac #1451, git b0d0bf39fbdc29a7879315f9b8e6d602ef3afb1b)

362.	[func]*		vorner
	Due to the socket creator changes, b10-auth and b10-resolver
	are no longer needed to start as root. They are started as
	the user they should be running, so they no longer have
	the -u flag for switching the user after initialization.
	Note: this change broke backward compatibility to boss component
	configuration.  If your b10-config.db contains "setuid" for
	Boss.components, you'll need to remove that entry by hand before
	starting BIND 10.
	(Trac #1508, #1509, #1510,
	git edc5b3c12eb45437361484c843794416ad86bb00)

361.	[func]		vorner,jelte,jinmei
	The socket creator is now used to provide sockets. It means you can
	reconfigure the ports and addresses at runtime even when the rest
	of the bind10 runs as non root user.
	(Trac #805,#1522, git 1830215f884e3b5efda52bd4dbb120bdca863a6a)

360.	[bug]		vorner
	Fixed problem where bindctl crashed when a duplicate non-string
	item was added  to a list.  This error is now properly reported.
	(Trac #1515, git a3cf5322a73e8a97b388c6f8025b92957e5d8986)

359.	[bug]		kevin
	Corrected SOA serial check in xfrout.  It now compares the SOA
	serial of an IXFR query with that of the server based serial
	number arithmetic, and replies with a single SOA record of the
	server's current version if the former is equal to or newer
	than the latter.
	(Trac #1462, git ceeb87f6d539c413ebdc66e4cf718e7eb8559c45)

358.	[bug]		jinmei
	b10-resolver ignored default configuration parameters if listen_on
	failed (this can easily happen especially for a test environment
	where the run time user doesn't have root privilege), and even if
	listen_on was updated later the resolver wouldn't work correctly
	unless it's fully restarted (for example, all queries would be
	rejected due to an empty ACL).
	(Trac #1424, git 2cba8cb83cde4f34842898a848c0b1182bc20597)

357.	[bug]		jinmei
	ZoneFinder::find() for database based data sources didn't
	correctly identify out-of-zone query name and could return a
	confusing result such as NXRRSET.  It now returns NXDOMAIN with an
	empty RRset.  Note: we should rather throw an exception in such a
	case, which should be revisited later (see Trac #1536).
	(Trac #1430, git b35797ba1a49c78246abc8f2387901f9690b328d)

356.	[doc]		tomek
	BIND10 Guide updated. It now describes DHCPv4 and DHCPv6
	components, including their overview, usage, supported standard
	and limitations. libdhcp++ is also described.
	(Trac #1367, git 3758ab360efe1cdf616636b76f2e0fb41f2a62a0)

355.	[bug]		jinmei
	Python xfrin.diff module incorrectly combined RRSIGs of different
	type covered, possibly merging different TTLs.  As a result a
	secondary server could store different RRSIGs than those at the
	primary server if it gets these records via IXFR.
	(Trac #1502, git 57b06f8cb6681f591fa63f25a053eb6f422896ef)

354.	[func]		tomek
	dhcp4: Support for DISCOVER and OFFER implemented. b10-dhcp4 is
	now able to offer hardcoded leases to DHCPv4 clients.
	dhcp6: Code refactored to use the same approach as dhcp4.
	(Trac #1230, git aac05f566c49daad4d3de35550cfaff31c124513)

353.	[func]		tomek
	libdhcp++: Interface detection in Linux implemented. libdhcp++
	is now able (on Linux systems) to detect available network
	interfaces, its link-layer addresses, flags and configured
	IPv4 and IPv6 addresses. Interface detection on other
	systems is planned.
	(Trac #1237, git 8a040737426aece7cc92a795f2b712d7c3407513)

352.	[func]		tomek
	libdhcp++: Transmission and reception of DHCPv4 packets is now
	implemented. Low-level hacks are not implemented for transmission
	to hosts that don't have IPv4 address yet, so currently the code
	is usable for communication with relays only, not hosts on the
	same link.
	(Trac #1239, #1240, git f382050248b5b7ed1881b086d89be2d9dd8fe385)

351.	[func]		fdupont
	Alpha version of DHCP benchmarking tool added.  "perfdhcp" is able to
	test both IPv4 and IPv6 servers: it can time the four-packet exchange
	(DORA and SARR) as well as time the initial two-packet exchange (DO
	and SA).  More information can be obtained by invoking the utility
	(in tests/tools/perfdhcp) with the "-h" flag.
	(Trac #1450, git 85083a76107ba2236732b45524ce7018eefbaf90)

350.	[func]*		vorner
	The target parameter of ZoneFinder::find is no longer present, as the
	interface was awkward. To get all the RRsets of a single domain, use
	the new findAll method (the same applies to python version, the method
	is named find_all).
	(Trac #1483,#1484, git 0020456f8d118c9f3fd6fc585757c822b79a96f6)

349.	[bug]		dvv
	resolver: If an upstream server responds with FORMERR to an EDNS
	query, try querying it without EDNS.
	(Trac #1386, git 99ad0292af284a246fff20b3702fbd7902c45418)

348.	[bug]		stephen
	By default the logging output stream is now flushed after each write.
	This fixes a problem seen on some systems where the log output from
	different processes was jumbled up.  Flushing can be disabled by
	setting the appropriate option in the logging configuration.
	(Trac #1405, git 2f0aa20b44604b671e6bde78815db39381e563bf)

347.	[bug]		jelte
	Fixed a bug where adding Zonemgr/secondary_zones without explicitly
	setting the class value of the added zone resulted in a cryptic
	error in bindctl ("Error: class"). It will now correctly default to
	IN if not set. This also adds better checks on the name and class
	values, and better errors if they are bad.
	(Trac #1414, git 7b122af8489acf0f28f935a19eca2c5509a3677f)

346.	[build]*		jreed
	Renamed libdhcp to libdhcp++.
	(Trac #1446, git d394e64f4c44f16027b1e62b4ac34e054b49221d)

345.	[func]		tomek
	dhcp4: Dummy DHCPv4 component implemented. Currently it does
	nothing useful, except providing skeleton implementation that can
	be expanded in the future.
	(Trac #992, git d6e33479365c8f8f62ef2b9aa5548efe6b194601)

344.	[func]		y-aharen
	src/lib/statistics: Added statistics counter library for entire server
	items and per zone items. Also, modified b10-auth to use it. It is
	also intended to use in the other modules such as b10-resolver.
	(Trac #510, git afddaf4c5718c2a0cc31f2eee79c4e0cc625499f)

343.	[func]		jelte
	Added IXFR-out system tests, based on the first two test sets of
	http://bind10.isc.org/wiki/IxfrSystemTests.
	(Trac #1314, git 1655bed624866a766311a01214597db01b4c7cec)

342.	[bug]		stephen
	In the resolver, a FORMERR received from an upstream nameserver
	now results in a SERVFAIL being returned as a response to the original
	query.  Additional debug messages added to distinguish between
	different errors in packets received from upstream nameservers.
	(Trac #1383, git 9b2b249d23576c999a65d8c338e008cabe45f0c9)

341.	[func]		tomek
	libdhcp++: Support for handling both IPv4 and IPv6 added.
	Also added support for binding IPv4 sockets.
	(Trac #1238, git 86a4ce45115dab4d3978c36dd2dbe07edcac02ac)

340.	[build]		jelte
	Fixed several linker issues related to recent gcc versions, botan
	and gtest.
	(Trac #1442, git 91fb141bfb3aadfdf96f13e157a26636f6e9f9e3)

339.	[bug]		jinmei
	libxfr, used by b10-auth to share TCP sockets with b10-xfrout,
	incorrectly propagated ASIO specific exceptions to the application
	if the given file name was too long.  This could lead to
	unexpected shut down of b10-auth.
	(Trac #1387, git a5e9d9176e9c60ef20c0f5ef59eeb6838ed47ab2)

338.	[bug]		jinmei
	b10-xfrin didn't check SOA serials of SOA and IXFR responses,
	which resulted in unnecessary transfer or unexpected IXFR
	timeouts (these issues were not overlooked but deferred to be
	fixed until #1278 was completed).  Validation on responses to SOA
	queries were tightened, too.
	(Trac #1299, git 6ff03bb9d631023175df99248e8cc0cda586c30a)

337.	[func]		tomek
	libdhcp++: Support for DHCPv4 option that can store a single
	address or a list of IPv4 addresses added. Support for END option
	added.
	(Trac #1350, git cc20ff993da1ddb1c6e8a98370438b45a2be9e0a)

336.	[func]		jelte
	libdns++ (and its python wrapper) now includes a class Serial, for 
	SOA SERIAL comparison and addition. Operations on instances of this 
	class follow the specification from RFC 1982. 
	Rdata::SOA::getSerial() now returns values of this type (and not 
	uint32_t).
	(Trac #1278, git 2ae72d76c74f61a67590722c73ebbf631388acbd)

335.	[bug]*		jelte
	The DataSourceClientContainer class that dynamically loads 
	datasource backend libraries no longer provides just a .so file name 
	to its call to dlopen(), but passes it an absolute path. This means 
	that it is no longer an system implementation detail that depends on 
	[DY]LD_LIBRARY_PATH which file is chosen, should there be multiple 
	options (for instance, when test-running a new build while a 
	different version is installed).
	These loadable libraries are also no longer installed in the default 
	library path, but in a subdirectory of the libexec directory of the 
	target ($prefix/libexec/[version]/backends).
	This also removes the need to handle b10-xfin and b10-xfrout as 
	'special' hardcoded components, and they are now started as regular 
	components as dictated by the configuration of the boss process.
	(Trac #1292, git 83ce13c2d85068a1bec015361e4ef8c35590a5d0)

334.	[bug]		jinmei
	b10-xfrout could potentially create an overflow response message
	(exceeding the 64KB max) or could create unnecessarily small
	messages.  The former was actually unlikely to happen due to the
	effect of name compression, and the latter was marginal and at least
	shouldn't cause an interoperability problem, but these were still
	potential problems and were fixed.
	(Trac #1389, git 3fdce88046bdad392bd89ea656ec4ac3c858ca2f)

333.	[bug]		dvv
	Solaris needs "-z now" to force non-lazy binding and prevent
	g++ static initialization code from deadlocking.
	(Trac #1439, git c789138250b33b6b08262425a08a2a0469d90433)

332.	[bug]		vorner
	C++ exceptions in the isc.dns.Rdata wrapper are now converted
	to python ones instead of just aborting the interpreter.
	(Trac #1407, git 5b64e839be2906b8950f5b1e42a3fadd72fca033)

bind10-devel-20111128 released on November 28, 2011

331.	[bug]		shane
	Fixed a bug in data source library where a zone with more labels
	than an out-of-bailiwick name server would cause an exception to
	be raised.
	(Trac #1430, git 81f62344db074bc5eea3aaf3682122fdec6451ad)

330.	[bug]		jelte
	Fixed a bug in b10-auth where it would sometimes fail because it
	tried to check for queued msgq messages before the session was
	fully running.
	(git c35d0dde3e835fc5f0a78fcfcc8b76c74bc727ca)

329.	[doc]		vorner, jreed
	Document the bind10 run control configuration in guide and
	manual page.
	(Trac #1341, git c1171699a2b501321ab54207ad26e5da2b092d63)

328.	[func]		jelte
	b10-auth now passes IXFR requests on to b10-xfrout, and no longer
	responds to them with NOTIMPL.
	(Trac #1390, git ab3f90da16d31fc6833d869686e07729d9b8c135)

327.	[func]		jinmei
	b10-xfrout now supports IXFR.  (Right now there is no user
	configurable parameter about this feature; b10-xfrout will
	always respond to IXFR requests according to RFC1995).
	(Trac #1371 and #1372, git 80c131f5b0763753d199b0fb9b51f10990bcd92b)

326.	[build]*		jinmei
	Added a check script for the SQLite3 schema version.  It will be
	run at the beginning of 'make install', and if it detects an old
	version of schema, installation will stop.  You'll then need to
	upgrade the database file by following the error message.
	(Trac #1404, git a435f3ac50667bcb76dca44b7b5d152f45432b57)

325.	[func]		jinmei
	Python isc.datasrc: added interfaces for difference management:
	DataSourceClient.get_updater() now has the 'journaling' parameter
	to enable storing diffs to the data source, and a new class
	ZoneJournalReader was introduced to retrieve them, which can be
	created by the new DataSourceClient.get_journal_reader() method.
	(Trac #1333, git 3e19362bc1ba7dc67a87768e2b172c48b32417f5,
	git 39def1d39c9543fc485eceaa5d390062edb97676)

324.	[bug]		jinmei
	Fixed reference leak in the isc.log Python module.  Most of all
	BIND 10 Python programs had memory leak (even though the pace of
	leak may be slow) due to this bug.
	(Trac #1359, git 164d651a0e4c1059c71f56b52ea87ac72b7f6c77)

323.	[bug]		jinmei
	b10-xfrout incorrectly skipped adding TSIG RRs to some
	intermediate responses (when TSIG is to be used for the
	responses).  While RFC2845 optionally allows to skip intermediate
	TSIGs (as long as the digest for the skipped part was included
	in a later TSIG), the underlying TSIG API doesn't support this
	mode of signing.
	(Trac #1370, git 76fb414ea5257b639ba58ee336fae9a68998b30d)

322.	[func]		jinmei
	datasrc: Added C++ API for retrieving difference of two versions
	of a zone.  A new ZoneJournalReader class was introduced for this
	purpose, and a corresponding factory method was added to
	DataSourceClient.
	(Trac #1332, git c1138d13b2692fa3a4f2ae1454052c866d24e654)

321.	[func]*		jinmei
	b10-xfrin now installs IXFR differences into the underlying data
	source (if it supports journaling) so that the stored differences
	can be used for subsequent IXFR-out transactions.
	Note: this is a backward incompatibility change for older sqlite3
	database files.  They need to be upgraded to have a "diffs" table.
	(Trac #1376, git 1219d81b49e51adece77dc57b5902fa1c6be1407)

320.	[func]*		vorner
	The --brittle switch was removed from the bind10 executable.
	It didn't work after change #316 (Trac #213) and the same
	effect can be accomplished by declaring all components as core.
	(Trac #1340, git f9224368908dd7ba16875b0d36329cf1161193f0)

319.	[func]		naokikambe
	b10-stats-httpd was updated. In addition of the access to all
	statistics items of all modules, the specified item or the items
	of the specified module name can be accessed.  For example, the
	URI requested by using the feature is showed as
	"/bind10/statistics/xml/Auth" or
	"/bind10/statistics/xml/Auth/queries.tcp". The list of all possible
	module names and all possible item names can be showed in the
	root document, whose URI is "/bind10/statistics/xml".  This change
	is not only for the XML documents but also is for the XSD and
	XSL documents.
	(Trac #917, git b34bf286c064d44746ec0b79e38a6177d01e6956)

318.	[func]		stephen
	Add C++ API for accessing zone difference information in
	database-based data sources.
	(Trac #1330, git 78770f52c7f1e7268d99e8bfa8c61e889813bb33)

317.	[func]		vorner
	datasrc: the getUpdater method of DataSourceClient supports an
	optional 'journaling' parameter to indicate the generated updater
	to store diffs.  The database based derived class implements this
	extension.
	(Trac #1331, git 713160c9bed3d991a00b2ea5e7e3e7714d79625d)

316.	[func]*		vorner
	The configuration of what parts of the system run is more
	flexible now.  Everything that should run must have an
	entry in Boss/components.
	(Trac #213, git 08e1873a3593b4fa06754654d22d99771aa388a6)

315.	[func]		tomek
	libdhcp: Support for DHCPv4 packet manipulation is now implemented.
	All fixed fields are now supported. Generic support for DHCPv4
	options is available (both parsing and assembly). There is no code
	that uses this new functionality yet, so it is not usable directly
	at this time. This code will be used by upcoming b10-dhcp4 daemon.
	(Trac #1228, git 31d5a4f66b18cca838ca1182b9f13034066427a7)

314.	[bug]		jelte
	b10-xfrin would previously initiate incoming transfers upon 
	receiving NOTIFY messages from any address (if the zone was 
	known to b10-xfrin, and using the configured address). It now 
	only starts a transfer if the source address from the NOTIFY 
	packet matches the configured master address and port. This was 
	really already fixed in release bind10-devel-20111014, but there 
	were some deferred cleanups to add.
	(Trac #1298, git 1177bfe30e17a76bea6b6447e14ae9be9e1ca8c2)

313.	[func]		jinmei
	datasrc: Added C++ API for adding zone differences to database
	based data sources.  It's intended to be used for the support for
	IXFR-in and dynamic update (so they can subsequently be retrieved
	for IXFR-out).  The addRecordDiff method of the DatabaseAccessor
	defines the interface, and a concrete implementation for SQLite3
	was provided.
	(Trac #1329, git 1aa233fab1d74dc776899df61181806679d14013)

312.	[func]		jelte
	Added an initial framework for doing system tests using the 
	cucumber-based BDD tool Lettuce. A number of general steps are
	included,  for instance running bind10 with specific
	configurations, sending queries, and inspecting query answers. A
	few very basic tests are included as well.
	(Trac #1290, git 6b75c128bcdcefd85c18ccb6def59e9acedd4437)

311.	[bug]		jelte
	Fixed a bug in bindctl where tab-completion for names that
	contain a hyphen resulted in unexpected behaviour, such as
	appending the already-typed part again.
	(Trac #1345, git f80ab7879cc29f875c40dde6b44e3796ac98d6da)

310.	[bug]		jelte
	Fixed a bug where bindctl could not set a value that is optional
	and has no default, resulting in the error that the setting
	itself was unknown. bindctl now correctly sees the setting and
	is able to set it.
	(Trac #1344, git 0e776c32330aee466073771600390ce74b959b38)

309.	[bug]		jelte
	Fixed a bug in bindctl where the removal of elements from a set
	with default values was not stored, unless the set had been
	modified in another way already.
	(Trac #1343, git 25c802dd1c30580b94345e83eeb6a168ab329a33)

308.	[build]		jelte
	The configure script will now use pkg-config for finding
	information about the Botan library. If pkg-config is unavailable,
	or unaware of Botan, it will fall back to botan-config. It will
	also use botan-config when a specific botan library directory is
	given using the '--with-botan=' flag
	(Trac #1194, git dc491833cf75ac1481ba1475795b0f266545013d)

307.	[func]		vorner
	When zone transfer in fails with IXFR, it is retried with AXFR
	automatically.
	(Trac #1279, git cd3588c9020d0310f949bfd053c4d3a4bd84ef88)

306.	[bug]		stephen
	Boss process now waits for the configuration manager to initialize
	itself before continuing with startup.  This fixes a race condition
	whereby the Boss could start the configuration manager and then
	immediately start components that depended on that component being
	fully initialized.
	(Trac #1271, git 607cbae949553adac7e2a684fa25bda804658f61)

305.	[bug]		jinmei
	Python isc.dns, isc.datasrc, xfrin, xfrout: fixed reference leak
	in Message.get_question(), Message.get_section(),
	RRset.get_rdata(), and DataSourceClient.get_updater().
	The leak caused severe memory leak in b10-xfrin, and (although no
	one reported it) should have caused less visible leak in
	b10-xfrout.  b10-xfrin had its own leak, which was also fixed.
	(Trac #1028, git a72886e643864bb6f86ab47b115a55e0c7f7fcad)

304.	[bug]		jelte
	The run_bind10.sh test script now no longer runs processes from
	an installed version of BIND 10, but will correctly use the
	build tree paths.
	(Trac #1246, git 1d43b46ab58077daaaf5cae3c6aa3e0eb76eb5d8)

303.	[bug]		jinmei
	Changed the installation path for the UNIX domain file used
	for the communication between b10-auth and b10-xfrout to a
	"@PACKAGE@" subdirectory (e.g. from /usr/local/var to
	/usr/local/var/bind10-devel).  This should be transparent change
	because this file is automatically created and cleaned up, but
	if the old file somehow remains, it can now be safely removed.
	(Trac #869, git 96e22f4284307b1d5f15e03837559711bb4f580c)

302.	[bug]		jelte
	msgq no longer crashes if the remote end is closed while msgq
	tries to send data. It will now simply drop the message and close
	the connection itself.
	(Trac #1180, git 6e68b97b050e40e073f736d84b62b3e193dd870a)

301.	[func]		stephen
	Add system test for IXFR over TCP.
	(Trac #1213, git 68ee3818bcbecebf3e6789e81ea79d551a4ff3e8)

300.	[func]*		tomek
	libdhcp: DHCP packet library was implemented. Currently it handles
	packet reception, option parsing, option generation and output
	packet building. Generic and specialized classes for several
	DHCPv6 options (IA_NA, IAADDR, address-list) are available. A
	simple code was added that leverages libdhcp. It is a skeleton
	DHCPv6 server. It receives incoming SOLICIT and REQUEST messages
	and responds with proper ADVERTISE and REPLY. Note that since
	LeaseManager is not implemented, server assigns the same
	hardcoded lease for every client. This change removes existing
	DHCPv6 echo server as it was only a proof of concept code.
	(Trac #1186, git 67ea6de047d4dbd63c25fe7f03f5d5cc2452ad7d)

299.	[build]		jreed
	Do not install the libfake_session, libtestutils, or libbench
	libraries. They are used by tests within the source tree.
	Convert all test-related makefiles to build test code at
	regular make time to better work with test-driven development.
	This reverts some of #1901. (The tests are ran using "make
	check".)
	(Trac #1286, git cee641fd3d12341d6bfce5a6fbd913e3aebc1e8e)

bind10-devel-20111014 released on October 14, 2011

298.	[doc]		jreed
	Shorten README. Include plain text format of the Guide.
	(git d1897d3, git 337198f)

297.	[func]		dvv
	Implement the SPF rrtype according to RFC4408.
	(Trac #1140, git 146934075349f94ee27f23bf9ff01711b94e369e)

296.	[build]		jreed
	Do not install the unittest libraries. At this time, they
	are not useful without source tree (and they may or may
	not have googletest support). Also, convert several makefiles
	to build tests at "check" time and not build time.
	(Trac #1091, git 2adf4a90ad79754d52126e7988769580d20501c3)

295.	[bug]		jinmei
	__init__.py for isc.dns was installed in the wrong directory,
	which would now make xfrin fail to start.  It was also bad
	in that it replaced any existing __init__.py in th public
	site-packages directory.  After applying this fix You may want to
	check if the wrong init file is in the wrong place, in which
	case it should be removed.
	(Trac #1285, git af3b17472694f58b3d6a56d0baf64601b0f6a6a1)

294.	[func]		jelte, jinmei, vorner
	b10-xfrin now supports incoming IXFR.  See BIND 10 Guide for
	how to configure it and operational notes.
	(Trac #1212, multiple git merges)

293.	[func]*		tomek
	b10-dhcp6: Implemented DHCPv6 echo server. It joins DHCPv6
	multicast groups and listens to incoming DHCPv6 client messages.
	Received messages are then echoed back to clients. This
	functionality is limited, but it can be used to test out client
	resiliency to unexpected messages. Note that network interface
	detection routines are not implemented yet, so interface name
	and its address must be specified in interfaces.txt.
	(Trac #878, git 3b1a604abf5709bfda7271fa94213f7d823de69d)

292.	[func]		dvv
	Implement the DLV rrtype according to RFC4431.
	(Trac #1144, git d267c0511a07c41cd92e3b0b9ee9bf693743a7cf)

291.	[func]		naokikambe
	Statistics items are specified by each module's spec file.
	Stats module can read these through the config manager. Stats
	module and stats httpd report statistics data and statistics
	schema by each module via both bindctl and HTTP/XML.
	(Trac #928,#929,#930,#1175,
	git 054699635affd9c9ecbe7a108d880829f3ba229e)

290.	[func]		jinmei
	libdns++/pydnspp: added an option parameter to the "from wire"
	methods of the Message class.  One option is defined,
	PRESERVE_ORDER, which specifies the parser to handle each RR
	separately, preserving the order, and constructs RRsets in the
	message sections so that each RRset contains only one RR.
	(Trac #1258, git c874cb056e2a5e656165f3c160e1b34ccfe8b302)

289.	[func]*		jinmei
	b10-xfrout: ACLs for xfrout can now be configured per zone basis.
	A per zone ACL is part of a more general zone configuration.  A
	quick example for configuring an ACL for zone "example.com" that
	rejects any transfer request for that zone is as follows:
	> config add Xfrout/zone_config
	> config set Xfrout/zone_config[0]/origin "example.com"
	> config add Xfrout/zone_config[0]/transfer_acl
	> config set Xfrout/zone_config[0]/transfer_acl[0] {"action": "REJECT"}
	The previous global ACL (query_acl) was renamed to transfer_acl,
	which now works as the default ACL.  Note: backward compatibility
	is not provided, so an existing configuration using query_acl
	needs to be updated by hand.
	Note: the per zone configuration framework is a temporary
	workaround.  It will eventually be redesigned as a system wide
	configuration.
	(Trac #1165, git 698176eccd5d55759fe9448b2c249717c932ac31)

288.	[bug]		stephen
	Fixed problem whereby the order in which component files appeared in
	rdataclass.cc was system dependent, leading to problems on some
	systems where data types were used before the header file in which
	they were declared was included.
	(Trac #1202, git 4a605525cda67bea8c43ca8b3eae6e6749797450)

287.	[bug]*		jinmei
	Python script files for log messages (xxx_messages.py) should have
	been installed under the "isc" package.  This fix itself should
	be a transparent change without affecting existing configurations
	or other operational practices, but you may want to clean up the
	python files from the common directly (such as "site-packages").
	(Trac #1101, git 0eb576518f81c3758c7dbaa2522bd8302b1836b3)

286.	[func]		ocean
	libdns++: Implement the HINFO rrtype support according to RFC1034,
	and RFC1035.
	(Trac #1112, git 12d62d54d33fbb1572a1aa3089b0d547d02924aa)

285.	[bug]		jelte
	sqlite3 data source: fixed a race condition on initial startup,
	when the database has not been initialized yet, and multiple
	processes are trying to do so, resulting in one of them failing.
	(Trac #326, git 5de6f9658f745e05361242042afd518b444d7466)

284.	[bug]		jerry
	b10-zonemgr: zonemgr will not terminate on empty zones, it will
	log a warning and try to do zone transfer for them.
	(Trac #1153, git 0a39659638fc68f60b95b102968d7d0ad75443ea)

283.	[bug]		zhanglikun
	Make stats and boss processes wait for answer messages from each
	other in block mode to avoid orphan answer messages, add an internal
	command "getstats" to boss process for getting statistics data from
	boss.
	(Trac #519, git 67d8e93028e014f644868fede3570abb28e5fb43)

282.	[func]		ocean
	libdns++: Implement the NAPTR rrtype according to RFC2915,
	RFC2168 and RFC3403.
	(Trac #1130, git 01d8d0f13289ecdf9996d6d5d26ac0d43e30549c)

bind10-devel-20110819 released on August 19, 2011

281.	[func]		jelte
	Added a new type for configuration data: "named set". This allows for
	similar configuration as the current "list" type, but with strings
	instead of indices as identifiers. The intended use is for instance
	/foo/zones/example.org/bar instead of /foo/zones[2]/bar. Currently
	this new type is not in use yet.
	(Trac #926, git 06aeefc4787c82db7f5443651f099c5af47bd4d6)

280.	[func]		jerry
	libdns++: Implement the MINFO rrtype according to RFC1035.
	(Trac #1113, git 7a9a19d6431df02d48a7bc9de44f08d9450d3a37)

279.	[func]		jerry
	libdns++: Implement the AFSDB rrtype according to RFC1183.
	(Trac #1114, git ce052cd92cd128ea3db5a8f154bd151956c2920c)

278.	[doc]		jelte
	Add logging configuration documentation to the guide.
	(Trac #1011, git 2cc500af0929c1f268aeb6f8480bc428af70f4c4)

277.	[func]		jerry
	libdns++: Implement the SRV rrtype according to RFC2782.
	(Trac #1128, git 5fd94aa027828c50e63ae1073d9d6708e0a9c223)

276.	[func]		stephen
	Although the top-level loggers are named after the program (e.g.
	b10-auth, b10-resolver), allow the logger configuration to omit the
	"b10-" prefix and use just the module name.
	(Trac #1003, git a01cd4ac5a68a1749593600c0f338620511cae2d)

275.	[func]		jinmei
	Added support for TSIG key matching in ACLs.  The xfrout ACL can
	now refer to TSIG key names using the "key" attribute.  For
	example, the following specifies an ACL that allows zone transfer
	if and only if the request is signed with a TSIG of a key name
	"key.example":
	> config set Xfrout/query_acl[0] {"action": "ACCEPT", \
	                                  "key": "key.example"}
	(Trac #1104, git 9b2e89cabb6191db86f88ee717f7abc4171fa979)

274.	[bug]		naokikambe
	add unittests for functions xml_handler, xsd_handler and xsl_handler
	respectively to make sure their behaviors are correct, regardless of
	whether type which xml.etree.ElementTree.tostring() after Python3.2
	returns is str or byte.
	(Trac #1021, git 486bf91e0ecc5fbecfe637e1e75ebe373d42509b)

273.	[func]		vorner
	It is possible to specify ACL for the xfrout module. It is in the ACL