ChangeLog 217 KB
Newer Older
1 2
778.    [func]		tmark
	If b10-dhcp-ddns is configured to listen on an address other than 
3
	loopback, it will issue a log message warning the user that this is
4 5 6 7
	insecure and is supported for testing purposes only.  
	(Trac #3383,    git  652aa4de2fa82fdf3de569d01d9f4aa618fc1972)

777.	[func]		tomek
8 9 10 11
	b10-dhcp4 and b10-dhcp6 now support using Postgresql as the backend
	for storing lease data.  This backend is enabled by specifying
	--with-dhcp-pgsql on the "configure" command line. Without this
	switch the Postgresql backend is not compiled leaving BIND 10 able to
12 13
	be built on systems without Postgresql installed.  Thanks to David
	Carlier who contributed the intial patches for this work.
14 15
	(Trac #3080,    git  1aae8b1fab3008e62c4f085948b1abadad512447)

16 17 18 19
776.	[func]		marcin
	b10-dhcp4, b10-dhcp6: added a new parameter to subnet configuration.
	This parameter allows subnet ids to be set to arbitrary values or
	automatically generated values. Generated subnet ids are renumbered
20
	each time one or more subnets are removed.  Setting the ids to
21
	specific values prevents this renumbering.
22
	(Trac #3281, git d90e9a0642fbb16a4e664160b4812f61fb81f1aa)
23

24 25 26 27 28
775.	[doc]		marcin
	Updated information in the BIND 10 Guide about the standards supported
	by Kea and its current limitations.
	(Trac #3258, git ff52b86206e3a256a02ca6d5cde55040550ba86a)

29 30 31 32 33 34 35
774.	[doc]		tmark
	Added sections to the BIND 10 guide on configuring and using the
	DHCP-DDNS feature of Kea.  Chapter 19, describes the new DHCP-DDNS
	server and its configuration. Additions to chapters 17 and 18
	describe configuring the DHCP servers to work with the new server.
	(Trac #3283, git 806eea955c61eba2d7268958a740a8e8ea63bdaf)

36 37 38 39 40 41 42 43 44
773.	[bug]		tmark
	b10-dhcp4 and b10-dhcp6 now both correctly support DDNS updates
	when honoring client requested delegation. When DDNS is enabled,
	and the client's FQDN indicates they will do the forward updates,
	the servers will now post a DDNS update request to b10-dhcp-ddns
	for the reverse updates. Prior to this the servers were posting no
	DDNS update requests when honoring client delegation.
	(Trac #3352, git b1a0f405463723d539b2e6ed2dcdd692d7796b88)

45 46 47 48 49 50
772.	[bug]		tmark
	Tickets #3339 and #3373 (see entries 760 and 768 respectively)
	were reverted. They introduced a bug where components added through
	bindctl, could not be removed.
	(Trac #3374, git c641e2d0569df3ca3e5a93beaf0ecf39db07e402)

51 52 53 54 55 56
771.	[bug]		tmark
	Configuration parsing in b10-dchp6 and b10-dhcp4 for the "dhcp-ddns"
	section of their configurations now supplies hard-coded default values
	rather than those from their spec files.  This is a temporary solution
	to circumvent an issue in the configuration libraries which causes
	map-items to behave incorrectly.
57
	(Trac #3358, git 983d8acec3a7ccb1ffef662eac7518aed5f99381)
58

59 60 61 62
770.	[func]		marcin
	b10-dhcp6: Implemented support for Rebind message.
	(Trac #3232, git 3649413932857470558a6f19e0b0e181b3fc0fda)

63 64 65 66 67 68 69 70
769.	[bug]		tmark
	b10-dhcp-ddns now treats a DNS server response code of NXRRSET as a
	successful outcome when processing a request to remove DNS data.  This
	corrects a defect in which b10-dhcp-ddns would incorrectly fail a request
	to remove DNS data when the DNS server's response was NXRRSET.
	(Trac #3362, git da3b0d4f364d069ffdb47723545798ac589fae42)

768.	[bug]		tmark
71 72 73 74 75 76
	Python configuration library now properly merges changes into
	configuration items that are maps of items.  This corrects a
	defect in which a change to an item in a map of items could
	committed, only to be lost upon committing a subsequent change
	to same map of items during the same bindctl session.
	(Trac #3373, git da3b0d4f364d069ffdb47723545798ac589fae42)
77

78 79 80 81 82
767.	[func]		tomek
	Unit-tests for all database backends are now shared. This improves
	test coverage for memfile and any future backends that may appear.
	(Trac #3359, git 3d6c11630ada9d0681a813cf026f6bb16aabb9fa)

83 84
bind10-1.2.0beta1 released on March 6, 2014

85 86 87 88 89 90 91 92
766.	[func]		muks
	--disable-dns and --disable-dhcp configure arguments have been
	added to conditionally disable the DNS or DHCP components
	respectively. This facility can be used to do a DNS or DHCP-only
	build of BIND 10. DNS and DHCP components are both enabled by
	default.
	(Trac #2367, git 81a689b61b1c4abf8a1a4fcbe41cfc96fd11792a)

93
765.	[bug]		tomek
Jeremy C. Reed's avatar
Jeremy C. Reed committed
94 95
	b10-dhcp4: Fixed a minor bug in eRouter1.0 class processing. The
	server no longer sets giaddr field.
96 97
	(Trac #3353, git 23c22e9b1141c699f361d45c309e737dfecf6f3f)

98
764.	[bug]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
99 100
	b10-dhcp4: Fixed a bug caused client classification to not work
	properly.
101 102
	(Trac #3343, git 1801400ac874380e7a565d373b4bae96a49e21f7)

103 104 105 106 107 108 109 110 111
763.	[func]		tmark
	b10-dhcp-ddns may now be configured to disable DNS updates in
	in a given direction by simply not defining any domains for that
	direction in its configuration.  This allows it to be configured to
	support either forward DNS or reverse DNS only.  Prior to this if
	a request was received that could not be matched to servers in a
	given direction it was failed immediately.
	(Trac #3341, git 01f26bce1d9faaddb8be59802f73891ea065b200)

112 113 114 115 116
762.	[func]		tmark
	If configured to do so, b10-dhcp6 will now create DHCP-DDNS update
	requests and send them to b10-dhcp-ddns for processing.
	(Trac# 3329, git 239956696465a13196a2b6bc0f3a61aed21a5de8)

Stephen Morris's avatar
Stephen Morris committed
117 118 119 120
761.	[doc]		stephen, jreed
	Added "man" page for perfdhcp.
	(Trac #2307, git ff2f538912c205fbdb1408ee613c09b90de53514)

Jeremy C. Reed's avatar
Jeremy C. Reed committed
121 122 123 124 125 126
760.	[bug]		tmark
	When merging a map of configuration elements into another, elements
	that are themselves maps will be merged. In particular, this
	corrects a defect which caused a configuration commit error to
	occur when using bindctl to modify a single a parameter in
	dhcp-ddns portion of b10-dhcp4 configuration.
127 128
	(Trac# 3339, git 3ae0d93d89f3277a566eeb045191a43b2dd9d9b1)

129
759.	[func]		tomek
Jeremy C. Reed's avatar
Jeremy C. Reed committed
130 131 132 133 134
	b10-dhcp4, b10-dhcp6: IP address of the relay agent can now be
	specified for both IPv4 and IPv6 subnets. That information allows
	the server to properly handle a case where relay agent address
	does not match subnet.  This is mostly useful in shared subnets
	and cable networks.
135 136
	(Trac #3322, git 5de565baea42c9096dff78ed5fbd05982a174469)

Jeremy C. Reed's avatar
Jeremy C. Reed committed
137 138 139 140 141
758.	[bug]		tmark
	b10-dhcp4 now correctly handles DHO_HOST_OPTION.  This corrects
	a bug where the server would fail to recognize the option in the
	DHCP request and then skip generating the appropriate DHCP-DDNS
	update request.
142 143
	(Trac #2426, git 985d66cba7665a71e17ef70c5d22c767abaad1b6)

144
757.	[func]		tmark
Jeremy C. Reed's avatar
Jeremy C. Reed committed
145 146 147 148 149 150 151
	b10-dhcp6 now parses parameters which support DHCP-DDNS updates
	via the DHCP-DDNS module, b10-dhcp-ddns.  These parameters are
	part of new configuration element, dhcp-ddns, defined in
	dhcp4.spec. These parameters influence when and how DDNS updates
	requests are created but communicating them to b10-dhcp-ddns is
	not yet supported.  That will be provided under separate ticket,
	Trac #3222.
152 153
	(Trac# 3034, git 22c667a66536ff3e3741bc67025d824644ed4e7d)

154 155 156 157 158 159 160 161 162 163
756.	[bug]		marcin
	b10-dhcp6: server parses DHCPv6 Vendor Class option. Previously
	the server failed to parse Vendor Class option having empty opaque
	data field because of the invalid definition in libdhcp++. The
	DHCPv6 Vendor Class option and DHCPv4 V-I Vendor Class option is
	now represented by the new OptionVendorClass. The b10-dhcp4 is
	affected by this change such that it uses new class to parse the
	DHCPv4 V-I Vendor Class option.
	(Trac #3316, git 1e61d7db5b8dc76682aa568cd62bfae0eeff46e3)

164 165 166 167
755.	[func]		muks
	Add support for the CAA RR type (RFC 6844).
	(Trac #2512, git 39162608985e5c904448f308951c73bb9c32da8f)

168 169 170 171
754.	[func]		muks
	Add support for the TLSA RR type (RFC 6698).
	(Trac #2185, git a168170430f6927f28597b2a6debebe31cf39b13)

172 173 174 175 176
753.	[func]		muks
	libdns++: the unknown/generic (RFC 3597) RDATA class now uses the
	generic lexer in constructors from text.
	(Trac #2426, git 0770d2df84e5608371db3a47e0456eb2a340b5f4)

177 178 179 180 181
752.	[func]		tmark
	If configured to do so, b10-dhcp4 will now create DHCP-DDNS update
	requests and send them to b10-dhcp-ddns for processing.
	(Trac# 3329, git 4546dd186782eec5cfcb4ddb61b0a3aa5c700751)

182 183 184 185 186
751.	[func]		muks
	The BIND 10 zone loader now supports the $GENERATE directive (a
	BIND 9 extension).
	(Trac #2430, git b05064f681231fe7f8571253c5786f4ff0f2ca03)

187
750.	[func]		tomek
188 189 190 191
	b10-dhcp4, b10-dhcp6: Simple client classification has been
	implemented. Incoming packets can be assigned to zero or more
	client classes. It is possible to restrict subnet usage to a given
	client class. User's Guide and Developer's Guide has been updated.
192 193
	(Trac #3274, git 1791d19899b92a6ee411199f664bdfc690ec08b2)

194
749.	[bug]		tmark
Jeremy C. Reed's avatar
Jeremy C. Reed committed
195 196 197 198
	b10-dhcp-ddns now sets the TTL value in RRs that add A, AAAA, or
	PTR DNS entries to the lease length provided in instigating
	NameChangeRequest.  This corrected a bug in which the TTL was
	always set to 0.
199 200
	(Trac# 3299, git dbacf27ece77f3d857da793341c6bd31ef1ea239)

201 202 203 204 205 206 207 208 209
748.	[bug]		marcin
	b10-dhcp4 server picks a subnet, to assign address for a directly
	connected client, using IP address of the interface on which the
	client's message has been received. If the message is received on
	the interface for which there is no suitable subnet, the message
	is discarded. Also, the subnet for renewing client which unicasts
	its request, is selected using ciaddr.
	(Trac #3242, git 9e571cc217d6b1a2fd6fdae1565fcc6fde6d08b1)

210 211 212 213 214 215 216
747.	[bug]		marcin
	libdhcpsrv: server configuration mechanism allows creating definitions
	for standard options for which Kea doesn't provide a definition yet.
	Without this, the server administrator couldn't configure options for
	which a definition didn't exist.
	(Trac# 3309, git 16a6ed6e48a6a950670c4874a2e81b1faf287d99)

217 218 219 220 221
746.	[func]		tomek
	IOAddress no longer exposes underlying asio objects. The getAddress()
	method has been removed and replaced with several convenience methods.
	(Trac #1485, git ecdb62db16b3f3d447db4a9d2a4079d5260431f0)

222
745.	[bug]*		muks
223 224 225 226 227 228
	b10-auth now returns rcode=REFUSED for all questions with
	qtype=RRSIG (i.e., where RRSIGs are queried directly). This is
	because RRSIGs are meaningless without being bundled alongside the
	RRs they cover.
	(Trac #2226, git 68d24e65c9c3dfee38adfbe1c93367b0083f9a58)

229
744.	[func]		marcin
Jeremy C. Reed's avatar
Jeremy C. Reed committed
230 231 232 233 234 235
	b10-dhcp6: Refactored the code which is processing Client FQDN
	option.  The major user-visible change is that server generates
	DDNS NameChangeRequest for the first IPv6 address (instead of all)
	acquired by a client. Also, the server generates fully qualified
	domain name from acquired IPv6 address, if the client sends an
	empty name in Client FQDN option.
236 237
	(Trac# 3295, git aa1c94a54114e848c64771fde308fc9ac0c00fd0)

238
743.	[func]		tmark
239
	b10-dhcp4 now responds with changes in DDNS behavior based upon
240
	configuration parameters specified through its dhcp-ddns configuration
241 242
	element. The parameters now supported are override-no-update,
	override-client-update, replace-client-name, generated-prefix, and
243 244 245
	qualifying-suffix.
	(Trac# 3282, git 42b1f1e4c4f5aa48b7588233402876f5012c043c)

246 247 248 249 250 251
742.	[func]		muks
	The authoritative server now includes the datasource configuration
	when logging some errors with the
	AUTH_DATASRC_CLIENTS_BUILDER_RECONFIGURE_ERROR message ID.
	(Trac #2756, git 31872754f36c840b4ec0b412a86afe9f38be86e0)

252 253
741.	[bug]		shane
	Remove hard-coded (and unnecessary) TSIG key from error message.
Shane Kerr's avatar
Shane Kerr committed
254 255 256
	This also prevents a crash if the TSIG name is missing.
	(Trac #3099, git 0ba8bbabe09756a4627e80aacdbb5050407faaac)

257 258 259 260 261 262 263 264
740.	[func]		muks
	When displaying messages about mismatched configuration data types
	in entered values (between the supplied value type and expected
	schema type), bindctl now includes both the supplied and expected
	configuration data types in the returned error. The user has more
	information on what caused the error now.
	(Trac #3239, git 84d5eda2a6ae0d737aef68d56023fc33fef623e6)

265 266 267 268 269 270 271
739.	[bug]		muks
	Various minor updates were made to the SSHFP RDATA parser. Mainly,
	the SSHFP constructor no longer throws an isc::BadValue exception.
	generic::SSHFP::getFingerprintLen() was also renamed to
	getFingerprintLength().
	(Trac #3287, git 2f26d781704618c6007ba896ad3d9e0c107d04b0)

272 273 274 275 276
738.	[bug]		muks
	b10-auth now correctly processes NXDOMAIN results in the root zone
	when using a SQLite3 data source.
	(Trac #2951, git 13685cc4580660eaf5b041b683a2d2f31fd24de3)

277 278 279 280 281
737.	[func]		muks
	b10-auth now additionally logs the source address and port when
	DNS messages with unsupported opcodes are received.
	(Trac #1516, git 71611831f6d1aaaea09143d4837eddbd1d67fbf4)

Jeremy C. Reed's avatar
Jeremy C. Reed committed
282
736.	[bug]		wlodek
283 284
	b10-dhcp6 is now capable to determine if a received
	message is addressed to it, using server identifier option.
Wlodzimierz Wencel's avatar
Wlodzimierz Wencel committed
285 286 287
	The messages with non-matching server identifier are dropped.
	(Trac #2892, git 3bd69e9b4ab9be231f7c966fd62b95a4e1595901)

288 289
735.	[doc]		stephen
	Expanded Developer's Guide to include chapter on logging.
Wlodzimierz Wencel's avatar
Wlodzimierz Wencel committed
290
	(Trac #2566, git a08d702839d9df6cddefeccab1e7e657377145de)
291

292 293 294 295 296 297
734.	[bug]		marcin
	libdhcp++: fixed a bug which caused an error when setting boolean
	values for an option. Also, bind10-guide has been updated with the
	examples how to set the boolean values for an option.
	(Trac# 3292, git 7c4c0514ede3cffc52d8c2874cdbdb74ced5f4ac)

298 299 300 301 302 303
733.	[bug]		marcin
	libdhcp++: a function which opens IPv6/UDPv6 sockets for the
	DHCPv6 server, gracefully handles errors to bind socket to
	a multicast address.
	(Trac #3288, git 76ace0c46a5fe0e53a29dad093b817ad6c891f1b)

304 305
732.	[func]		tomek
	b10-dhcp4, b10-dhcp6: Support for simplified client classification
Jeremy C. Reed's avatar
Jeremy C. Reed committed
306 307 308 309 310 311 312
	added. Incoming packets are now assigned to a client class based
	on the content of the packet's user class option (DHCPv4) or vendor
	class option (DHCPv6). Two classes (docsis3.0 and eRouter1.0) have
	class specific behavior in b10-dhcp4. See DHCPv4 Client
	Classification and DHCPv6 Client Classification in BIND10
	Developer's Guide for details.  This is a first ticket in a series
	of planned at least three tickets.
313 314
	(Trac #3203, git afea612c23143f81a4201e39ba793bc837c5c9f1)

315
731.	[func]		tmark
Jeremy C. Reed's avatar
Jeremy C. Reed committed
316 317 318 319 320
	b10-dhcp4 now parses parameters which support DHCP-DDNS updates
	via the DHCP-DDNS module, b10-dhcp-ddns.  These parameters are
	part of new configuration element, dhcp-ddns, defined in
	dhcp4.spec.  The parameters parse, store and retrieve but do not
	yet govern behavior.  That will be provided under separate ticket.
321 322
	(Trac# 3033, git 0ba859834503f2b9b908cd7bc572e0286ca9201f)

323
730.	[bug]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
324
	b10-dhcp4, b10-dhcp6: Both servers used to unnecessarily increase
325 326
	subnet-id values after reconfiguration. The subnet-ids are now reset
	to 1 every time a server is reconfigured.
327 328
	(Trac #3234, git 31e416087685a6dadc3047fdbb0927bbf60095aa)

329 330 331 332 333
729.	[bug]		marcin
	b10-dhcp4 discards DHCPv4 messages carrying server identifiers
	which don't match server identifiers used by the server.
	(Trac #3279, git 805d2b269c6bf3e7be68c13f1da1709d8150a666)

334 335 336 337 338 339 340
728.	[func]		marcin
	b10-dhcp6: If server fails to open a socket on one interface it
	will log a warning and continue to open sockets on other interfaces.
	The warning message is communicated from the libdhcp++ via the
	error handler function supplied by the DHCPv6 server.
	(Trac #3252, git af5eada1bba906697ee92df3fcc25cc0e3979221)

341 342 343 344
727.	[func]		muks
	RRset::setName() has now been removed.
	(Trac #2335, git c918027a387da8514acf7e125fd52c8378113662)

345
726.	[bug]*		muks
346 347 348 349 350 351
	Don't print trailing newlines in Question::toText() output by
	default.  This fixes some logging that were split with a line
	feed.  It is possible to get the old behavior by passing
	toText(true).  Message::toText() output is unchanged.
	(Trac #571, git 7286499d5206c6d2aa8a59a5247c3841a772a43e)

352 353 354
725.	[func]		tmark
	b10-dhcp-ddns D2UpdateMgr now uses the newly implemented
	NameAddTransaction and NameRemoveTransaction classes.  This allows
355
	it to conduct actual DNS update exchanges based upon queued
356 357 358
	NameChangeRequests.
	(Trac# 3089, git 9ff948a169e1c1f3ad9e1bad1568375590a3ef42)

359 360 361 362 363 364 365 366
724.	[bug]		marcin
	b10-dhcp4: Different server identifiers are used for the packets
	being sent through different interfaces. The server uses IPv4 address
	assigned to the particular interface as a server identifier. This
	guarantees that the unicast packet sent by a relay or a client, to
	the address being a server identifier, will reach the server.
	(Trac #3231, git c7a229f15089670d2bfde6e9f0530c30ce6f8cf8)

367
723.	[bug]		marcin
Jeremy C. Reed's avatar
Jeremy C. Reed committed
368 369 370 371 372 373 374
	libdhcp++: Implemented unit tests for the IfaceMgr's routine
	which opens IPv6 sockets on detected interfaces. The IfaceMgr
	logic performing low level operations on sockets has been
	moved to a separate class. By providing a custom implementation
	of this class, the unit tests may use fake interfaces with
	custom configuration and thus cover wide range of test
	scenarios for the function.
375 376
	(Trac #3251, git 21d2f7ec425f8461b545687104cd76a42da61b2e)

377 378 379 380 381
722.	[bug]		muks
	b10-cmdctl now prints a more operator-friendly message when the
	address+port that b10-cmdctl listens on is already in use.
	(Trac #3227, git 5ec35e37dbb46f66ff0f6a9d9a6a87a393b37934)

382 383 384 385 386
721.	[func]		tmark
	Updates the user_chk example hooks shared library with callouts
	for packet receive and packet send.  Decision outcome now includes
	the lease or prefix assigned.  The user registry now supports a
	default user entry.
387 388
	(Trac #3207, git 34fddf2e75b80d9e517a8f9c3321aa4878cda795)

389 390
720.	[func]		tmark
	Added the initial implementation of the class, NameAddTransaction,
391 392 393 394
	to b10-dhcp-ddns.  This class provides a state machine which
	implements the logic required to remove forward and reverse DNS
	entries as described in RFC 4703, section 5.5. This includes the
	ability to construct the necessary DNS requests.
395
	(Trac# 3088, git ca58ac00fce4cb5f46e534d7ffadb2db4e4ffaf3)
396

397
719.	[func]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
398
	b10-dhcp4: Support for sending back client-id (RFC6842) has been
Tomek Mrugalski's avatar
Tomek Mrugalski committed
399 400 401
	added now. Also a configuration parameter (echo-client-id) has
	been added, so it is possible to enable backward compatibility
	("echo-client-id false").
402 403 404
	(Trac #3210, git 88a4858db206dfcd53a227562198f308f7779a72)

718.	[func]		dclink, tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
405 406 407
	libdhcp++: Interface detection implemented for FreeBSD, NetBSD,
	OpenBSD, Mac OS X and Solaris 11. Thanks to David Carlier for
	contributing a patch.
408
	(Trac #2246, git d8045b5e1580a1d0b89a232fd61c10d25a95e769)
Tomek Mrugalski's avatar
Tomek Mrugalski committed
409

410 411 412 413 414
717.	[bug]		marcin
	Fixed the bug which incorrectly treated DHCPv4 option codes 224-254 as
	standard options, barring them from being used as custom options.
	(Trac #2772, git c6158690c389d75686545459618ae0bf16f2cdb8)

415
716.	[func]		marcin
Jeremy C. Reed's avatar
Jeremy C. Reed committed
416 417 418 419 420
	perfdhcp: added support for sending DHCPv6 Release messages
	at the specified rate and measure performance. The orphan
	messages counters are not displayed for individual exchanges
	anymore. The following ticket: #3261 has been submitted to
	implement global orphan counting for all exchange types.
421 422
	(Trac #3181, git 684524bc130080e4fa31b65edfd14d58eec37e50)

423 424 425 426 427 428
715.	[bug]		marcin
	libdhcp++: Used the CMSG_SPACE instead of CMSG_LEN macro to calculate
	msg_controllen field of the DHCPv6 message. Use of CMSG_LEN causes
	sendmsg failures on OpenBSD due to the bug kernel/6080 on OpenBSD.
	(Trac #1824, git 39c9499d001a98c8d2f5792563c28a5eb2cc5fcb)

429
714.	[doc]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
430
	BIND10 Contributor's Guide added.
431 432
	(Trac #3109, git 016bfae00460b4f88adbfd07ed26759eb294ef10)

433
713.	[func]		tmark
Jeremy C. Reed's avatar
Jeremy C. Reed committed
434 435 436 437
	Added DNS update request construction to d2::NameAddTransaction
	in b10-dhcp-ddns.  The class now generates all DNS update
	request variations needed to fulfill it's state machine in
	compliance with RFC 4703, sections 5.3 and 5.4.
438
	(Trac# 3241, git dceca9554cb9410dd8d12371b68198b797cb6cfb)
439

440
712.	[func]		marcin, dclink
441 442 443 444 445 446 447
	b10-dhcp4: If server fails to open a socket on one interface it
	will log a warning and continue to open sockets on other interfaces.
	The warning message is communicated from the libdhcp++ via the
	error handler function supplied by the DHCPv4 server. Thanks to
	David Carlier for providing a patch.
	(Trac #2765, git f49c4b8942cdbafb85414a1925ff6ca1d381f498)

448
711.	[func]		tmark
449 450 451 452 453 454
	Added the initial implementation of the class, NameAddTransaction,
	to b10-dhcp-ddns.  This class provides the state model logic
	described in the DHCP_DDNS design to add or replace forward and
	reverse DNS entries for a given FQDN.  It does not yet construct
	the actual DNS update requests, this will be added under Trac#
	3241.
455
	(Trac# 3087, git 8f99da735a9f39d514c40d0a295f751dc8edfbcd)
456

457
710.	[build]		jinmei
458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473
	Fixed various build time issues for MacOS X 10.9.  Those include
	some general fixes and improvements:
	- (libdns++) masterLoad() functions now use the generic MasterLoader
	  class as backend, eliminating the restrictions of the previous
	  versions.
	- (libcc) fixed a minor portability bug in the JSON parser.  Although
	  the only known affected system is OS X 10.9 at the moment, that
	  could potentially cause disruption on other existing and future
	  systems.
	Other notes:
	- if built with googletest, gtest 1.7 (and possibly higher) is
	  required.
	- many older versions of Boost don't work.  A known workable version
	  is 1.54.
	(Trac #3213, git d4e570f097fe0eb9009b177a4af285cde0c636cc)

474 475 476 477 478
709.	[bug]		marcin
	b10-dhcp6: Server crashed when the client sent FQDN option and did
	not request FQDN option to be returned.
	(Trac #3220, git 0f1ed4205a46eb42ef728ba6b0955c9af384e0be)

479
708.	[bug]		dclink, marcin
480 481 482 483 484
	libdhcpsrv: Fixed a bug in Memfile lease database backend which
	caused DHCPv4 server crashes when leases with NULL client id
	were present. Thanks to David Carlier for submitting the patch.
	(Trac #2940, git a232f3d7d92ebcfb7793dc6b67914299c45c715b)

485 486 487 488 489 490
707.	[bug]		muks
	Using very large numbers (out of bounds) in config values caused
	BIND 10 to throw an exception. This has been fixed in a patch
	contributed by David Carlier.
	(Trac #3114, git 9bd776e36b7f53a6ee2e4d5a2ea79722ba5fe13b)

491 492
706.	[func]		marcin
	b10-dhcp4: Server processes the DHCPv4 Client FQDN and Host Name
493
	options sent by a client and generates the response. As a result
494 495 496 497 498 499 500
	of processing, the server generates NameChangeRequests which
	represent changes to DNS mappings for a particular lease (addition
	or removal of DNS mappings).
	Currently all generated NameChangeRequests are dropped. Sending
	them to b10-dhcp-ddns will be implemented with the future tickets.
	(Trac #3035, git f617e6af8cdf068320d14626ecbe14a73a6da22)

501
705.	[bug]*		kean
Kean Johnston's avatar
Kean Johnston committed
502 503 504 505 506
	When commands are piped into bindctl, no longer attempt to query the
	user name and password if no default user name and password file is
	present, or it contains no valid entries.
	(Trac #264, git 4921d7de6b5623c7e85d2baf8bc978686877345b)

507 508 509 510 511 512 513
704.	[func]		naokikambe
	New statistics items related to IP sockets added into b10-xfrin:
	open, openfail, close, connfail, conn, senderr, and recverr.
	Their values can be obtained by invoking "Stats show Xfrin" via
	bindctl while b10-xfrin is running.
	(Trac #2300, git 4655c110afa0ec6f5669bf53245bffe6b30ece4b)

Jeremy C. Reed's avatar
Jeremy C. Reed committed
514
703.	[bug]		kean
Kean Johnston's avatar
Kean Johnston committed
515 516 517 518 519
	A bug in b10-msgq was fixed where it would remove the socket file if
	there was an existing copy of b10-msgq running. It now correctly
	detects and reports this without removing the socket file.
	(Trac #433, git c18a49b0435c656669e6f87ef65d44dc98e0e726)

520 521 522 523 524
702.	[func]		marcin
	perfdhcp: support for sending DHCPv6 Renew messages at the specified
	rate and measure performance.
	(Trac #3183, git 66f2939830926f4337623b159210103b5a8e2434)

Kean Johnston's avatar
Kean Johnston committed
525
701.	[bug]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
526
	libdhcp++: Incoming DHCPv6 IAPREFIX option is now parsed properly.
Tomek Mrugalski's avatar
Tomek Mrugalski committed
527
	(Trac #3211, git ed43618a2c7b2387d76f99a5a4b1a3e05ac70f5e)
528

529 530
700.	[func]		tomek, marcin
	b10-dhcp4, b10-dhcp6: Support for vendor options has been added. It
531 532 533 534 535
	is now possible to configure vendor options. Server is able to
	parse some CableLabs vendor options and send configured	vendor
	options	in response. The support is not complete.
	(Trac #3194, git 243ded15bbed0d35e230d00f4e3ee42c3609616c)

Tomek Mrugalski's avatar
Tomek Mrugalski committed
536 537 538 539 540
699.	[bug]		marcin
	libdhcp++: Options with defined suboptions are now handled properly.
	In particular, Relay Agent Info options is now echoed back properly.
	(Trac #3102, git 6f6251bbd761809634aa470f36480d046b4d2a20)

541 542 543 544 545 546
698.	[bug]		muks
	A bug was fixed in the interaction between b10-init and b10-msgq
	that caused BIND 10 failures after repeated start/stop of
	components.
	(Trac #3094, git ed672a898d28d6249ff0c96df12384b0aee403c8

Jeremy C. Reed's avatar
Jeremy C. Reed committed
547
697.	[func]		tmark
548
	Implements "user_check" hooks shared library which supports subnet
549
	selection based upon the contents of a list of known DHCP lease users
550
	(i.e. clients).  Adds the following subdirectories to the bind10 src
551
	directory for maintaining hooks shared libraries:
Jeremy C. Reed's avatar
Jeremy C. Reed committed
552 553 554 555 556
	bind10/src/hooks - base directory for hooks shared libraries;
	bind10/src/hooks/dhcp - base directory for all hooks libs
	pertaining to DHCP (Kea);
	bind10/src/hooks/dhcp/user_check - directory containing the
	user_check hooks library.
557 558
	(Trac #3186, git f36aab92c85498f8511fbbe19fad5e3f787aef68)

559
696.	[func]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
560 561 562
	b10-dhcp4: It is now possible to specify value of siaddr field
	in DHCPv4 responses. It is used to point out to the next
	server in the boot process (that typically is TFTP server).
563 564
	(Trac #3191, git 541922b5300904a5de2eaeddc3666fc4b654ffba)

565
695.	[func]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
566
	b10-dhcp6 is now able to listen on global IPv6 unicast addresses.
567
	(Trac #3195, git 72e601f2a57ab70b25d50877c8e49242739d1c9f)
Tomek Mrugalski's avatar
Tomek Mrugalski committed
568

569
694.	[bug]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
570 571 572
	b10-dhcp6 now handles exceptions better when processing initial
	configuration. In particular, errors with socket binding do not
	prevent b10-dhcp6 from establishing configuration session anymore.
573
	(Trac #3195, git 72e601f2a57ab70b25d50877c8e49242739d1c9f)
Tomek Mrugalski's avatar
Tomek Mrugalski committed
574

575
693.	[bug]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
576
	b10-dhcp6 now handles IPv6 interface enabling correctly.
577 578
	(Trac #3195, git 72e601f2a57ab70b25d50877c8e49242739d1c9f)

579 580 581 582 583 584 585
692.	[bug]		marcin
	b10-dhcp4: Fix a bug whereby the Parameter Request List was not parsed
	by the server and requested DHCPv4 options were not returned to the
	client. Options are not sent back to the client if server failed to
	assign a lease.
	(Trac #3200, git 50d91e4c069c6de13680bfaaee3c56b68d6e4ab1)

586 587 588 589
691.	[bug]		marcin
	libdhcp++: Created definitions for standard DHCPv4 options:
	tftp-server-name (66) and boot-file-name (67). Also, fixed definition
	of DHCPv4 option time-offset (2).
590
	(Trac #3199, git 6e171110c4dd9ae3b1be828b9516efc65c33460b)
591

592
690.	[bug]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
593 594
	b10-dhcp4: Relay Agent Info option is now echoed back in
	DHCPv4 responses.
595 596
	(Trac #3184, git 287389c049518bff66bdf6a5a49bb8768be02d8e)

597 598 599 600 601
689.	[func]*		marcin
	b10-dhcp4 and b10-dhcp6 install callback functions which parse options
	in the received DHCP packets.
	(Trac #3180, git f73fba3cde9421acbeb9486c615900b0af58fa25)

602 603 604
688.	[func]		tomek
	b10-dhcp6: Prefix Delegation support is now extended to
	Renew and Release messages.
605
	(Trac #3153, #3154, git 3207932815f58045acea84ae092e0a5aa7c4bfd7)
606

607
687.	[func]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
608 609
	b10-dhcp6: Prefix Delegation (IA_PD and IAPREFIX options) is now
	supported in Solicit and Request messages.
610
	(Trac #3152, git a0e73dd74658f2deb22fad2c7a1f56d122aa9021)
Tomek Mrugalski's avatar
Tomek Mrugalski committed
611

612
686.	[bug]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
613
	b10-dhcp6 now sends back relayed traffic to proper port.
614
	(Trac #3177, git 6b33de4bea92eecb64b6c673bf1b8ae51f8edcf1)
Tomek Mrugalski's avatar
Tomek Mrugalski committed
615

616
685.	[func]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
617 618
	libdhcpsrv: Allocation Engine is now able to handle IPv6 prefixes.
	This will be used in Prefix Delegation.
619
	(Trac #3171, git 7d1431b4c887f0c7ee1b26b9b82d3d3b8464b34f)
Tomek Mrugalski's avatar
Tomek Mrugalski committed
620

621 622 623 624 625 626 627 628
684.	[func]		muks, vorner
	API support to delete zone data has been added. With this,
	DomainTree and RdataSet which form the central zone data
	structures of b10-auth allow deletion of names and RR data
	respectively.
	(Trac #2750, git d3dbe8e1643358d4f88cdbb7a16a32fd384b85b1)
	(Trac #2751, git 7430591b4ae4c7052cab86ed17d0221db3b524a8)

629
683.	[bug]		stephen
Jeremy C. Reed's avatar
Jeremy C. Reed committed
630 631 632 633 634
	Modifications to fix problems running unit tests if they
	are statically linked.  This includes provision of an
	initialization function that must be called by user-written
	hooks libraries if they are loaded by a statically-linked
	image.
635 636
	(Trac #3113, git 3d19eee4dbfabc7cf7ae528351ee9e3a334cae92)

Naoki Kambe's avatar
Naoki Kambe committed
637
682.	[func]		naokikambe
Jeremy C. Reed's avatar
Jeremy C. Reed committed
638 639 640 641
	New statistics items added into b10-xfrin : ixfr_running,
	axfr_running, and soa_in_progress.  Their values can be
	obtained by invoking "Stats show Xfrin" via bindctl when
	b10-xfrin is running.
Naoki Kambe's avatar
Naoki Kambe committed
642 643
	(Trac #2274, git ca691626a2be16f08754177bb27983a9f4984702)

644
681.	[func]		tmark
645 646
	Added support for prefix delegation configuration to b10-dhcp6
	subnets.
647
	(Trac# 3151, git 79a22be33825bafa1a0cdfa24d5cb751ab1ae2d3)
648

649 650 651 652 653 654
680.	[func]		marcin
	perfdhcp: Added support for requesting IPv6 prefixes using IA_PD
	option being sent to the server.
	(Trac #3173, git 4cc844f7cc82c8bd749296a2709ef67af8d9ba87)

679.	[func]		tmark
Jeremy C. Reed's avatar
Jeremy C. Reed committed
655 656
	b10-dhcp-ddns: Finite state machine logic was refactored
	into its own class, StateModel.
657
	(Trac# 3156, git 6e9227b1b15448e834d1f60dd655e5633ff9745c)
658

659 660
678.	[func]		tmark
	MySQL backend used by b10-dhcp6 now uses lease type as a
661
	filtering parameter in all IPv6 lease queries.
662
	(Trac# 3147, git 65b6372b783cb1361fd56efe2b3247bfdbdc47ea)
663

664
677.	[func]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
665 666
	libdhcpsrv: CfgMgr is now able to store IA, TA and PD pools in
	Subnet6 structures.
667 668
	(Trac #3150, git e6f0e89162bac0adae3ce3141437a282d5183162)

669 670 671
676.	[bug]		muks
	We now also allow the short name ("hmac-md5"), along with the long
	name ("hmac-md5.sig-alg.reg.int") that was allowed before for
672
	HMAC-MD5, so that it is more convenient to configure TSIG keys
673 674 675
	using it.
	(Trac #2762, git c543008573eba65567e9c189824322954c6dd43b)

Jeremy C. Reed's avatar
Jeremy C. Reed committed
676
675.	[func]		vorner
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
677 678 679 680 681
	If there's an exception not handled in a Python BIND10 component,
	it is now stored in a temporary file and properly logged, instead
	of dumping to stderr.
	(Trac #3095, git 18cf54ed89dee1dd1847053c5210f0ca220590c2)

682
674.	[func]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
683 684
	Preparatory work for prefix delegation in LeaseMgr. getLease6()
	renamed to getLeases6(). It now can return more than one lease.
685 686
	(Trac #3146, git 05a05d810be754e7a4d8ca181550867febf6dcc6)

687 688 689 690 691
673.	[func]		tomek
	libdhcp: Added support for IA_PD and IAPREFIX options. New class
	for IAPREFIX (Option6_IAPrefix) has been added.
	(Trac #3145, git 3a844e85ecc3067ccd1c01841f4a61366cb278f4)

Tomek Mrugalski's avatar
Tomek Mrugalski committed
692
672.	[func]		tmark
693 694 695 696 697
	Added b10-dhcp-ddns transaction base class, NameChangeTransaction.
	This class provides the common structure and methods to implement
	the state models described in the DHCP_DDNS design, plus
	integration with DNSClient and its callback mechanism for
	asynchronous IO with the DNS servers.
698 699
	(Trac #3086, git 079b862c9eb21056fdf957e560b8fe7b218441b6)

700
671.	[func]		dclink, tomek
Jeremy C. Reed's avatar
Jeremy C. Reed committed
701 702 703
	The memfile backend now supports getLease4(hwaddr) and
	getLease4(client-id) methods. Thanks to David Carlier for
	contributing a patch.
704 705
	(Trac #2592, git a11683be53db2f9f8f9b71c1d1c163511e0319b3)

706 707 708 709 710 711
670.	[func]		marcin
	libdhcpsrv: Added support to MySQL lease database backend to
	store FQDN data for the lease.
	(Trac #3084, git 79b7d8ee017b57a81cec5099bc028e1494d7e2e9)

669.	[func]		tmark
712
	Added main process event loop to D2Process which is the primary
713
	application object in b10-dhcp-ddns. This allows DHCP-DDNS
714 715 716 717 718
	to queue requests received from clients for processing while
	listening for command control events.
	(Trac #3075 git e2f9d2e4c1b36f01eb5bfa2c4f8d55cf139c7e02)

668.	[func]		marcin
719 720 721 722
	libdhcpsrv: Implemented changes to lease allocation engine to
	propagate information about client's FQDN.
	(Trac #3083, git 37af28303d1cd61f675faea969cd1159df65bf9d)

723
667.	[func]		tomek
724 725
	Additional hooks (buffer4_receive, lease4_renew,
	lease4_release, buffer4_send) added to the DHCPv4 server.
726 727
	(Trac #2983, git fd47f18f898695b98623a63a0a1c68d2e4b37568)

Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
728 729 730 731 732
666.	[func]		vorner
	The CmdCtl's command "print_settings" was removed. It served no real
	purpose and was just experimental leftover from early development.
	(Trac #3028, git 0d22246092ad4822d48f5a52af5f644f5ae2f5e2)

733
665.	[doc]		stephen
734 735
	Added the "Hook's Maintenance Guide" to the BIND 10 developer
	documentation.
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
736
	(Trac #3063, git 5d1ee7b7470fc644b798ac47db1811c829f5ac24)
737

Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
738
664.	[bug]		tmark
739 740 741 742 743 744
	Corrects a bug in Hooks processing that was improperly
	creating a new callout handle on every call, rather
	than maintaining it throughout the context of the
	packet being processed.
	(Trac #3062, git 28684bcfe5e54ad0421d75d4445a04b75358ce77)

745
663.	[func]		marcin
746
	b10-dhcp6: Server processes the DHCPv6 Client FQDN Option
747 748 749 750 751 752
	sent by a client and generates the response. The DHCPv6 Client
	FQDN Option is represented by the new class in the libdhcp++.
	As a result of FQDN Option processing, the server generates
	NameChangeRequests which represent changes to DNS mappings for
	a particular lease (addition or removal of DNS mappings).
	Currently all generated NameChangeRequests are dropped. Sending
753
	them to b10-dhcp-ddns will be implemented with the future tickets.
754 755
	(Trac #3036, git 209f3964b9f12afbf36f3fa6b62964e03049ec6e)

756 757 758 759 760 761 762
662.	[func]		marcin
	libdhcp++: Implemented an Option4ClientFqdn class which represents
	DHCPv4 Client FQDN Option (code 81) defined in RFC4702. This class
	supports the domain name encoding in canonical FQDN format as well
	as in deprecated ASCII format.
	(Trac# 3082, git 1b434debfbf4a43070eb480fa0975a6eff6429d4)

Jeremy C. Reed's avatar
Jeremy C. Reed committed
763
661.	[func]		stephen
Stephen Morris's avatar
Stephen Morris committed
764 765 766 767 768
	Copy additional header files to the BIND 10 installation directory
	to allow the building of DHCP hooks libraries against an installed
	version of BIND 10.
	(Trac #3092, git e9beef0b435ba108af9e5979476bd2928808b342)

769
660.	[func]		fujiwara
770
	src/lib/cc: Integer size of C++ CC library is changed to int64_t.
771 772 773 774 775
	b10-auth: The size of statistics counters is changed to uint64_t.
	b10-auth sends lower 63 bit of counter values to b10-stats.
	(Trac #3015,  git e5b3471d579937f19e446f8a380464e0fc059567
	 and Trac #3016, git ffbcf9833ebd2f1952664cc0498608b988628d53)

Stephen Morris's avatar
Stephen Morris committed
776
659.	[func]		stephen
777 778 779
	Added capability to configure the hooks libraries for the
	b10-dhcp4 and b10-dhcp6 servers through the BIND 10
	configuration mechanism.
Stephen Morris's avatar
Stephen Morris committed
780 781
	(Trac #2981, git aff6b06b2490fe4fa6568e7575a9a9105cfd7fae)

Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
782 783 784
658.	[func]*		vorner
	The resolver, being experimental, is no longer installed by default.
	If you really want to use it, even when it is known to be buggy, use
785
	the ./configure --enable-experimental-resolver option.
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
786 787 788
	(Trac #3064, git f5f07c976d2d42bdf80fea4433202ecf1f260648)

657.	[bug]		vorner
789 790 791 792 793
	Due to various problems with older versions of boost and
	shared memory, the server rejects to compile with combination
	of boost < 1.48 and shared memory enabled. Most users don't
	need shared memory, admins of large servers are asked to
	upgrade boost.
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
794 795
	(Trac #3025, git 598e458c7af7d5bb81131112396e4c5845060ecd)

796
656.	[func]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
797 798
	Additional hooks (buffer6_receive, lease6_renew,
	lease6_release, buffer6_send) added to the DHCPv6 server.
799 800 801
	(Trac #2984, git 540dd0449121094a56f294c500c2ed811f6016b6)

655.	[func]		tmark
802 803 804 805 806
	Added D2UpdateMgr class to b10-dhcp-ddns. This class is
	the b10-dhcp-ddns task master, instantiating and supervising
	transactions that carry out the DNS updates needed to
	fulfill the requests (NameChangeRequests) received from
	b10-dhcp-ddns clients (e.g. DHCP servers).
807
	(Trac #3059 git d72675617d6b60e3eb6160305738771f015849ba)
808

809 810 811 812
654.	[bug]		stephen
	Always clear "skip" flag before calling any callouts on a hook.
	(Trac# 3050, git ff0b9b45869b1d9a4b99e785fbce421e184c2e93)

Thomas Markwalder's avatar
Thomas Markwalder committed
813 814
653.	[func]		tmark
	Added initial implementation of D2QueueMgr to
815 816
	b10-dhcp-ddns.  This class manages the receipt and
	queueing of requests received by b10-dhcp-ddns from
Thomas Markwalder's avatar
Thomas Markwalder committed
817 818 819
	its clients (e.g. DHCP servers)
	(Trac# 3052, git a970f6c5255e000c053a2dc47926cea7cec2761c)

Stephen Morris's avatar
Stephen Morris committed
820 821 822 823 824
652.	[doc]		stephen
	Added the "Hook Developer's Guide" to the BIND 10 developer
	documentation.
	(Trac# 2982, git 26a805c7e49a9ec85ee825f179cda41a2358f4c6)

825 826 827 828 829
651.	[bug]		muks
	A race condition when creating cmdctl certificates caused corruption
	of these certificates in rare cases. This has now been fixed.
	(Trac# 2962, git 09f557d871faef090ed444ebeee7f13e142184a0)

830 831 832 833 834 835 836
650.	[func]		muks
	The DomainTree rebalancing code has been updated to be more
	understandable. This ChangeLog entry is made just to make a note
	of this change. The change should not cause any observable
	difference whatsoever.
	(Trac# 2811, git 7c0bad1643af13dedf9356e9fb3a51264b7481de)

837 838 839 840 841
649.	[func]		muks
	The default b10-xfrout also_notify port has been changed from
	0 to 53.
	(Trac# 2925, git 8acbf043daf590a9f2ad003e715cd4ffb0b3f979)

842 843 844 845 846 847 848 849
648.	[func]		tmark
	Moved classes pertaining to sending and receiving
	NameChangeRequests from src/bin/d2 into their own library,
	libdhcp_ddns, in src/lib/dhcp_ddns.  This allows the
	classes to be shared between DHDCP-DDNS and its clients,
	such as the DHCP servers.
	(Trac# 3065, git 3d39bccaf3f0565152ef73ec3e2cd03e77572c56)

850 851 852
647.	[func]		tmark
	Added initial implementation of classes for sending
	and receiving NameChangeRequests between DHCP-DDNS
853 854
	and its clients such as DHCP. This includes both
	abstract classes and a derivation which traffics
855 856 857
	requests across UDP sockets.
	(Trac #3008, git b54530b4539cec4476986442e72c047dddba7b48)

Stephen Morris's avatar
Stephen Morris committed
858 859 860 861 862 863
646.	[func]		stephen
	Extended the hooks framework to add a "validate libraries" function.
	This will be used to check libraries specified during BIND 10
	configuration.
	(Trac #3054, git 0f845ed94f462dee85b67f056656b2a197878b04)

864
645.	[func]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
865
	Added initial set of hooks (pkt4_receive, subnet4_select,
866
	lease4_select, pkt4_send) to the DHCPv4 server.
867 868
	(Trac #2994, git be65cfba939a6a7abd3c93931ce35c33d3e8247b)

869 870 871 872 873 874 875 876 877
644.	[func]		marcin
	b10-dhcp4, b10-dhcp6: Implemented selection of the interfaces
	that server listens on, using Configuration Manager. It is
	possible to specify interface names explicitly or use asterisk
	to specify that server should listen on all available interfaces.
	Sockets are reopened according to the new configuration as
	soon as it is committed.
	(Trac #1555, git f48a3bff3fbbd15584d788a264d5966154394f04)

878 879 880 881 882 883 884
643.	[bug]		muks
	When running some unittests as root that depended on insufficient
	file permissions, the tests used to fail because the root user
	could still access such files. Such tests are now skipped when
	they are run as the root user.
	(Trac #3056, git 92ebabdbcf6168666b03d7f7fbb31f899be39322)

885
642.	[func]		tomek
Tomek Mrugalski's avatar
Tomek Mrugalski committed
886
	Added initial set of hooks (pkt6_receive, subnet6_select,
887 888 889
	lease6_select, pkt6_send) to the DHCPv6 server.
	(Trac #2995, git d6de376f97313ba40fef989e4a437d184fdf70cc)

890 891 892 893 894 895
641.	[func]		stephen
	Added the hooks framework. This allows shared libraries of
	user-written functions to be loaded at run-time and the
	functions called during packet processing.
	(Trac #2980, git 82c997a72890a12af135ace5b9ee100e41c5534e)

896 897 898 899
640.	[func]		marcin
	b10-dhcp-ddns: Implemented DNSClient class which implements
	asynchronous DNS updates using UDP. The TCP and TSIG support
	will be	implemented at later time. Nevertheless, class API
900
	accommodates the use of TCP and TSIG.
901 902
	(Trac #2977, git 5a67a8982baa1fd6b796c063eeb13850c633702c)

903 904 905 906 907 908
639.	[bug]		muks
	Added workaround for build failure on Fedora 19 between GCC 4.8.x
	and boost versions less than 1.54. Fedora 19 currently ships
	boost-1.53.
	(Trac #3039, git 4ef6830ed357ceb859ebb3e5e821a064bd8797bb)

Naoki Kambe's avatar
Naoki Kambe committed
909 910 911 912 913 914
638.	[bug]*		naokikambe
	Per-zone statistics counters are distinguished by zone class,
	e.g. IN, CH, and HS. A class name is added onto a zone name in
	structure of per-zone statistics.
	(Trac #2884, git c0153581c3533ef045a92e68e0464aab00947cbb)

915
637.	[func]		tmark
916 917 918 919 920
	Added initial implementation of NameChangeRequest,
	which embodies DNS update requests sent to DHCP-DDNS
	by its clients.
	(trac3007 git f33bdd59c6a8c8ea883f11578b463277d01c2b70)

921
636.	[func]		tmark
922
	Added the initial implementation of configuration parsing for
923
	DHCP-DDNS.
924 925
	(Trac #2957, git c04fb71fa44c2a458aac57ae54eeb1711c017a49)

926 927 928 929
635.	[func]		marcin
	b10-dhcp-ddns: Implemented DNS Update message construction.
	(Trac #2796, git eac5e751473e238dee1ebf16491634a1fbea25e2)

930 931 932 933 934 935 936 937 938
634.	[bug]		muks
	When processing DDNS updates, we now check the zone more
	thoroughly with the received zone data updates to check if it is
	valid.  If the zone fails validation, we reply with SERVFAIL
	rcode. So, while previously we may have allowed more zone data
	cases without checking which resulted in invalid zones, such
	update requests are now rejected.
	(Trac #2759, git d8991bf8ed720a316f7506c1dd9db7de5c57ad4d)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
939 940 941 942 943 944 945
633.	[func]		jinmei
	b10-memmgr: a new BIND 10 module that manages shared memory
	segments for DNS zone data.  At this point it's runnable but does
	nothing really meaningful for end users; it was added to the
	master branch for further development.
	(Trac #2854, git d05d7aa36d0f8f87b94dba114134b50ca37eabff)

946 947 948 949 950
632.	[bug]		marcin
	perfdhcp: Fixed a bug in whereby the application was sporadically
	crashing when timed out packets were garbage collected.
	(Trac #2979, git 6d42b333f446eccc9d0204bcc04df38fed0c31db)

951 952 953 954 955
631.	[bug]		muks
	Applied a patch by Tomas Hozza to fix a couple of compile errors
	on Fedora 19 development release.
	(Trac #3001, git 6e42b90971b377261c72d51c38bf4a8dc336664a)

956 957 958 959 960 961 962
630.	[bug]		muks
	If there is a problem loading the backend module for a type of
	data source, b10-auth would not serve any zones. This behaviour
	has been changed now so that it serves zones from all other usable
	data sources that were configured.
	(Trac #2947, git 9a3ddf1e2bfa2546bfcc7df6d9b11bfbdb5cf35f)

963 964 965 966
629.	[func]		stephen
	Added first part of the hooks framework.
	(Trac #2794, git d2b107586db7c2deaecba212c891d231d7e54a07)

967 968 969 970 971 972
628.	[func]		y-aharen
	b10-auth: A new statistics item 'qryrecursion' has been introduced.
	The counter is for the number of queries (OpCode=Query) with Recursion
	Desired (RD) bit on.
	(Trac #2796, git 3d291f42cdb186682983aa833a1a67cb9e6a8434)

973
627.	[func]		tmark
974 975 976 977
	Logger name for DHCP-DDNS has been changed from "d2_logger" to
	"dhcpddns".  In addition, its log messages now use two suffixes,
	DCTL_ for logs the emanate from the underlying base classes, and
	DHCP_DDNS_ for logs which emanate from DHCP-DDNS specific code
978
	(Trac #2978, git 5aec5fb20b0486574226f89bd877267cb9116921)
Thomas Markwalder's avatar
Thomas Markwalder committed
979

980 981 982
626.	[func]		tmark
	Created the initial implementation of DHCP-DDNS service
	controller class, D2Controller, and the abstract class from
983
	which it derives, DControllerBase. D2Controller manages the
984
	lifecycle and BIND10 integration of the DHCP-DDNS application
985
	process, D2Process. Also note, module name is now
986 987 988
	b10-dhcp-ddns.
	(Trac #2956, git a41cac582e46213c120b19928e4162535ba5fe76)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
989 990 991 992 993 994 995 996 997 998
625.	[bug]*		jinmei
	b10-xfrin/b10-loadzone: b10-xfrin now refers to the unified
	"data_sources" module configuration instead of almost-deprecated
	the Auth/database_file configuration (Note: zonemgr still uses the
	latter, so a secondary server would still need it for the moment).
	Due to this change, b10-xfrin does not auto-generate an initial
	zone for the very first transfer anymore; b10-loadzone has been
	extended with a new -e option for the initial setup.
	(Trac #2946, git 8191aec04c5279c199909f00f0a0b2b8f7bede94)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
999 1000 1001 1002 1003 1004 1005 1006 1007 1008
624.	[bug]		jinmei
	logging: prevented multiple BIND 10 processes from generating
	multiple small log files when they dumped logs to files and try
	to roll over them simultaneously.  This fix relies on a feature of
	underling logging library (log4cplus) version 1.1.0 or higher,
	so the problem can still happen if BIND 10 is built with an older
	version of log4cplus. (But this is expected to happen rarely in
	any case unless a verbose debug level is specified).
	(Trac #1622, git 5da8f8131b1224c99603852e1574b2a1adace236)

1009
623.	[func]		tmark
1010 1011 1012 1013
	Created the initial, bare-bones implementation of DHCP-DDNS
	service process class, D2Process, and the abstract class
	from which it derives, DProcessBase. D2Process will provide
	the DHCP-DDNS specific event loop and business logic.
1014 1015
	(Trac #2955, git dbe4772246039a1257b6492936fda2a8600cd245)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026
622.	[func]*		jinmei
	b10-xfrin now has tighter control on the choice of IXFR or AXFR
	through zones/request_ixfr configuration item.  It includes
	the new "IXFR only" behavior for some special cases.  b10-xfrin
	now also uses AXFR whenever necessary, so it is now safe to try
	IXFR by default and it's made the default.  The previous
	use_ixfr configuration item was deprecated and triggers startup
	failure if specified; configuration using use_ixfr should be
	updated.
	(Trac #2911, git 8118f8e4e9c0ad3e7b690bbce265a163e4f8767a)

1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038
621.	[func]		team
	libdns++: All Rdata classes now use the generic lexer in
	constructors from text. This means that the name fields in such
	RRs in a zone file can now be non-absolute (the origin name in that
	context will be used), e.g., when loaded by b10-loadzone. Note
	that the existing string constructors for these Rdata classes also
	use the generic lexer, and they now expect an absolute name (with
	the trailing '.') in the name fields.
	(Trac #2522, git ea97070cf6b41299351fc29af66fa39c6465d56a)
	(Trac #2521, git c6603decaadcd33ccf9aee4a7b22447acec4b7f6)
	(See also ChangeLog 594, 564, 545)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
1039 1040 1041 1042 1043 1044 1045 1046 1047 1048
620.	[bug]		jinmei
	b10-auth now returns SERVFAIL to queries for a zone that is
	configured to be loaded in-memory but isn't due to load time
	errors (missing zone file or errors in the zone file, etc).
	Such zones were previously treated as non existent and would
	result in REFUSED or unintentional match against less specific
	zones.  The revised behavior is also compatible with BIND 9.
	(Trac #2905, git 56ee9810fdfb5f86bd6948e6bf26545ac714edd8)

619.	[bug]		jinmei
JINMEI Tatuya's avatar
JINMEI Tatuya committed
1049 1050 1051 1052 1053
	b10-xfrout now uses blocking send for xfr response messages
	to prevent abrupt termination of the stream due to a slower
	client or narrower network bandwidth.
	(Trac #2934, git bde0e94518469557c8b455ccbecc079a38382afd)

1054
618.	[func]*		marcin
JINMEI Tatuya's avatar
JINMEI Tatuya committed
1055 1056 1057 1058 1059 1060 1061 1062 1063
	b10-dhcp4: Added the ability for the server to respond to a
	directly connected client which does not yet have an IP address.
	On Linux, the server will unicast the response to the client's
	hardware address and the 'yiaddr' (the client's new IP
	address). Sending a response to the unicast address prevents other
	(not interested) hosts from receiving the server response. This
	capability is not yet implemented on non-Linux Operating Systems
	where, in all cases, the server responds to the broadcast
	address. The logic conforms to section 4.1 of RFC 2131.
1064 1065
	(Trac #2902, git c2d40e3d425f1e51647be6a717c4a97d7ca3c29c)

1066 1067 1068 1069 1070 1071 1072 1073
617.	[bug]		marcin
	b10-dhcp4: Fixed a bug whereby the domain-name option was encoded
	as FQDN (using technique described in RFC1035) instead of a string.
	Also, created new class which represents an option carrying a single
	string value. This class is now used for all standard options of
	this kind.
	(Trac #2786, git 96b1a7eb31b16bf9b270ad3d82873c0bd86a3530)

1074 1075 1076 1077 1078 1079
616.	[doc]		stephen
	Added description to the DHCP "Database Back-Ends" section of the
	BIND 10 Developer's Guide about how to set up a MySQL database for
	testing the DHCP MySQL backend.
	(Trac #2653, git da3579feea036aa2b7d094b1c260a80a69d2f9aa)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
1080 1081 1082 1083 1084 1085 1086
615.	[bug]		jinmei
	b10-auth: Avoid referencing to a freed object when authoritative
	server addresses are reconfigured.  It caused a crash on a busy
	server during initial startup time, and the same crash could also
	happen if listen_on parameters are reconfigured at run time.
	(Trac #2946, git d5f2a0d0954acd8bc33aabb220fab31652394fcd)

1087
614.	[func]		tmark
1088
	b10-d2: Initial DHCP-DDNS (a.k.a. D2) module implemented.
Jeremy C. Reed's avatar
Jeremy C. Reed committed
1089 1090
	Currently it does nothing useful, except for providing the
	skeleton implementation to be expanded in the future.
1091 1092
	(Trac #2954, git 392c5ec5d15cd8c809bc9c6096b9f2bfe7b8c66a)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103
613.	[func]		jinmei
	datasrc: Error handling in loading zones into memory is now more
	consistent and convenient: data source configuration does not fail
	due to zones configured to be loaded into memory but not available
	in the data source, just like the case of missing zone file for
	the MasterFiles type of data source.  Also, zones that aren't
	loaded into memory due to errors can now be reloaded for b10-auth
	using the bindctl Auth loadzone command after fixing the error,
	without reconfiguring the entire data source.
	(Trac #2851, git a3d4fe8a32003534150ed076ea0bbf80e1fcc43c)

1104 1105
612.	[func]		tomek
	b10-dhcp6: Support for relayed DHCPv6 traffic has been added.
1106
	(Trac #2898, git c3f6b67fa16a07f7f7ede24dd85feaa7c157e1cb)
1107

Naoki Kambe's avatar
Naoki Kambe committed
1108 1109 1110 1111 1112 1113 1114
611.	[func]		naokikambe
	Added Xfrin statistics items such as the number of successful
	transfers.  These are per-zone type counters.  Their values can be
	obtained with zone names by invoking "Stats show Xfrin" via bindctl
	while Xfrin is running.
	(Trac #2252, git e1a0ea8ef5c51b9b25afa111fbfe9347afbe5413)

1115
bind10-1.1.0beta2 released on May 10, 2013
1116

1117 1118 1119 1120 1121 1122
610.	[bug]		muks
	When the sqlite3 program is not available on the system (in
	PATH), we no longer attempt to run some tests which depend
	on it.
	(Trac #1909, git f85b274b85b57a094d33ca06dfbe12ae67bb47df)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
1123 1124 1125 1126 1127 1128 1129 1130 1131
609.	[bug]		jinmei
	Handled some rare error cases in DNS server classes correctly.
	This fix specifically solves occasional crash of b10-auth due to
	errors caused by TCP DNS clients.  Also, as a result of cleanups
	with the fix, b10-auth should now be a little bit faster in
	handling UDP queries: in some local experiments it ran about 5%
	faster.
	(Trac #2903, git 6d3e0f4b36a754248f8a03a29e2c36aef644cdcc)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
1132 1133 1134 1135 1136 1137 1138 1139
608.	[bug]		jinmei
	b10-cmdctl: fixed a hangup problem on receiving the shutdown
	command from bindctl.  Note, however, that cmdctl is defined as
	a "needed" module by default, so shutting down cmdctl would cause
	shutdown of the entire BIND 10 system anyway, and is therefore
	still not very useful in practice.
	(Trac #2712, git fa392e8eb391a17d30550d4b290c975710651d98)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152
607.	[bug]		jinmei
	Worked around some unit test regressions on FreeBSD 9.1 due to
	a binary compatibility issue between standard and system
	libraries (http://www.freebsd.org/cgi/query-pr.cgi?pr=175453).
	While not all tests still pass, main BIND 10 programs should
	generally work correctly.  Still, there can be odd run time
	behavior such as abrupt crash instead of graceful shutdown
	when some fatal event happens, so it's generally discouraged to
	use BIND 10 on FreeBSD 9.1 RELEASE.  According to the above
	bug report for FreeBSD, it seems upgrading or downgrading the
	FreeBSD version will solve this problem.
	(Trac #2887, git 69dfb4544d9ded3c10cffbbfd573ae05fdeb771f)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
1153 1154 1155 1156 1157 1158 1159
606.	[bug]		jinmei
	b10-xfrout now correctly stops sending notify requests once it
	receives a valid response.  It previously handled it as if the
	requests are timed out and resent it a few times in a short
	period.
	(Trac #2879, git 4c45f29f28ae766a9f7dc3142859f1d0000284e1)

Thomas Markwalder's avatar
Thomas Markwalder committed
1160
605.	[bug]		tmark
1161 1162
	Modified perfdhcp to calculate the times displayed for packet sent
	and received as time elapsed since perfdhcp process start time.
Thomas Markwalder's avatar
Thomas Markwalder committed
1163 1164 1165 1166 1167
	Previously these were times since the start of the epoch.
	However the large numbers involved caused loss of precision
	in the calculation of the test statistics.
	(Trac #2785, git e9556924dcd1cf285dc358c47d65ed7c413e02cf)

Marcin Siodelski's avatar