dbutil_test.sh.in 12.7 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
#!/bin/sh
# Copyright (C) 2012  Internet Systems Consortium, Inc. ("ISC")
#
# Permission to use, copy, modify, and/or distribute this software for any
# purpose with or without fee is hereby granted, provided that the above
# copyright notice and this permission notice appear in all copies.
#
# THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
# AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
# PERFORMANCE OF THIS SOFTWARE.

# Checks that the logger will limit the output of messages less severe than
# the severity/debug setting.

testname="Database Upgrade Test"
echo $testname

failcount=0
tempfile=@abs_builddir@/dbutil_test_tempfile_$$
backupfile=${tempfile}.backup
testdata=@abs_srcdir@/testdata
verfile=@abs_builddir@/dbutil_test_verfile_$$

# @brief Record a success
succeed() {
    echo "--- PASS"
}


# @brief Record a fail
#
# @param $1 Optional additional reason to output
fail() {
Stephen Morris's avatar
Stephen Morris committed
38
    if [ "$1" != "" ]
39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70
    then
        echo "ERROR: $1"
    fi
    echo "*** FAIL"
    failcount=`expr $failcount + 1`
}


# @brief Record a pass if the argument is zero
#
# @param $1 Value to test
passzero() {
    if [ $1 -eq 0 ]; then
        succeed
    else
        fail
    fi
}


# @brief Record a fail if the argument is non-zero
#
# @param $1 Value to test
failzero() {
    if [ $1 -ne 0 ]; then
        succeed
    else
        fail
    fi
}


Stephen Morris's avatar
Stephen Morris committed
71 72 73 74 75 76 77 78 79 80 81 82 83
# @brief Copy File
#
# Executes a "cp" operation followed by a "chmod" to make the target writeable.
#
# @param $1 Source file
# @param $2 Target file
copy_file () {
    cp $1 $2
    chmod a+w $2
}



84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140
# @brief Check backup file
#
# Record a failure if the backup file does not exist or if it is different
# to the data file. (N.B. No success is recorded if they are the same.)
#
# @param $1 Source database file
# @param $2 Backup file
check_backup() {
    if [ ! -e $1 ]
    then
        fail "database file $1 not found"

    elif [ ! -e $2 ]
    then
        fail "backup file $2 not found"

    else
        diff $1 $2 > /dev/null
        if [ $? -ne 0 ]
        then
            fail "database file $1 different to backup file $2"
        fi
    fi
}


# @brief Check No Backup File
#
# Record a failure if the backup file exists.  (N.B. No success is recorded if
# it does not.)
#
# @param $1 Source database file (unused, present for symmetry)
# @param $2 Backup file
check_no_backup() {
    if [ -e $2 ]
    then
        fail "backup of database $2 exists when it should not"
    fi
}


# @brief Get Database Schema
#
# As the schema stored in the database is format-dependent - how it is printed
# depends on how the commands were entered (on one line, split across two
# lines etc.) - comparing schema is awkward.
#
# The function sets the local variable db_schema to the output of the
# .schema command, with spaces removed and upper converted to lowercase.
#
# The database is copied before the schema is taken (and removed after)
# as SQLite3 assummes a writeable database, which may not be the case if
# getting the schema from a reference copy.
#
# @param $1 Database for which the schema is required
get_schema() {
    db1=@abs_builddir@/dbutil_test_schema_$$
Stephen Morris's avatar
Stephen Morris committed
141
    copy_file $1 $db1
142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160

    db_schema=`sqlite3 $db1 '.schema' | \
               awk '{line = line $0} END {print line}' | \
               sed -e 's/ //g' | \
               tr [:upper:] [:lower:]`
    rm -f $db1
}


# @brief Successful Schema Upgrade Test
#
# This test is done where the upgrade is expected to be successful - when
# the end result of the test is that the test database is upgraded to a
# database of the expected schema.
#
# Note: the caller must ensure that $tempfile and $backupfile do not exist
#       on entry, and is responsible for removing them afterwards.
#
# @param $1 Database to upgrade
Stephen Morris's avatar
Stephen Morris committed
161
# @param $2 Expected backup file
162
upgrade_ok_test() {
Stephen Morris's avatar
Stephen Morris committed
163
    copy_file $1 $tempfile
Stephen Morris's avatar
Stephen Morris committed
164
    ../run_dbutil.sh --upgrade --noconfirm $tempfile
165 166 167 168 169 170 171
    if [ $? -eq 0 ]
    then
        # Compare schema with the reference
        get_schema $testdata/v2_0.sqlite3
        expected_schema=$db_schema
        get_schema $tempfile
        actual_schema=$db_schema
Stephen Morris's avatar
Stephen Morris committed
172
        if [ "$expected_schema" = "$actual_schema" ]
173 174 175 176 177 178
        then
            succeed
        else
            fail "upgraded schema not as expected"
        fi

Stephen Morris's avatar
Stephen Morris committed
179
        # Check the version is set correctly
180
        check_version $tempfile "V2.0"
Stephen Morris's avatar
Stephen Morris committed
181 182 183

        # Check that a backup was made
        check_backup $1 $2
184 185 186 187 188 189 190
    else
        # Error should have been output already
        fail
    fi
}


Stephen Morris's avatar
Stephen Morris committed
191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207
# @brief Unsuccessful Upgrade Test
#
# Checks that an upgrade of the specified database fails.
#
# Note: the caller must ensure that $tempfile and $backupfile do not exist
#       on entry, and is responsible for removing them afterwards.
#
# @param $1 Database to upgrade
# @param $2 Expected backup file
upgrade_fail_test() {
    copy_file $1 $tempfile
    ../run_dbutil.sh --upgrade --noconfirm $tempfile
    failzero $?
    check_backup $1 $backupfile
}


208 209 210 211 212 213 214 215 216 217
# @brief Record Count Test
#
# Checks that the count of records in each table is preserved in the upgrade.
#
# Note 1: This test assumes that the "diffs" table is present.
# Note 2: The caller must ensure that $tempfile and $backupfile do not exist
#         on entry, and is responsible for removing them afterwards.
#
# @brief $1 Database to upgrade
record_count_test() {
Stephen Morris's avatar
Stephen Morris committed
218
    copy_file $1 $tempfile
219 220 221 222 223 224

    diffs_count=`sqlite3 $tempfile 'select count(*) from diffs'`
    nsec3_count=`sqlite3 $tempfile 'select count(*) from nsec3'`
    records_count=`sqlite3 $tempfile 'select count(*) from records'`
    zones_count=`sqlite3 $tempfile 'select count(*) from zones'`

Stephen Morris's avatar
Stephen Morris committed
225
    ../run_dbutil.sh --upgrade --noconfirm $tempfile
226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269
    if [ $? -ne 0 ]
    then
        # Reason for failure should already have been output
        fail
    else
        new_diffs_count=`sqlite3 $tempfile 'select count(*) from diffs'`
        new_nsec3_count=`sqlite3 $tempfile 'select count(*) from nsec3'`
        new_records_count=`sqlite3 $tempfile 'select count(*) from records'`
        new_zones_count=`sqlite3 $tempfile 'select count(*) from zones'`

        if [ $diffs_count -ne $new_diffs_count ]
        then
            fail "diffs table was not completely copied"
        fi

        if [ $nsec3_count -ne $new_nsec3_count ]
        then
            fail "nsec3 table was not completely copied"
        fi

        if [ $records_count -ne $new_records_count ]
        then
            fail "records table was not completely copied"
        fi

        if [ $zones_count -ne $new_zones_count ]
        then
            fail "zones table was not completely copied"
        fi

        # As an extra check, test that the backup was successful
        check_backup $1 $backupfile
    fi
}


# @brief Version Check
#
# Checks that the database is at the specified version (and so checks the
# --check function).  On success, a pass is recorded.
#
# @param $1 Database to check
# @param $2 Expected version string
check_version() {
Stephen Morris's avatar
Stephen Morris committed
270
    copy_file $1 $verfile
Stephen Morris's avatar
Stephen Morris committed
271
    ../run_dbutil.sh --check $verfile
272 273 274 275
    if [ $? -ne 0 ]
    then
        fail "version check failed on database $1"
    else
Stephen Morris's avatar
Stephen Morris committed
276
        ../run_dbutil.sh --check $verfile | grep "$2" > /dev/null
277 278 279 280 281 282 283 284 285 286 287
        if [ $? -ne 0 ]
        then
            fail "database $1 not at expected version $2"
        else
            succeed
        fi
    fi
    rm -f $verfile
}


Stephen Morris's avatar
Stephen Morris committed
288 289 290 291 292 293 294 295 296 297 298 299 300 301
# @brief Version Check Fail
#
# Does a version check but expected the check to fail
#
# @param $1 Database to check
# @param $2 Backup file
check_version_fail() {
    copy_file $1 $verfile
    ../run_dbutil.sh --check $verfile
    failzero $?
    check_no_backup $tempfile $backupfile
}


302 303 304 305 306 307
# Main test sequence

rm -f $tempfile $backupfile

# Test 1 - check that the utility fails if the database does not exist
echo "1.1. Non-existent database - check"
Stephen Morris's avatar
Stephen Morris committed
308
../run_dbutil.sh --check $tempfile
309 310 311 312
failzero $?
check_no_backup $tempfile $backupfile

echo "1.2. Non-existent database - upgrade"
Stephen Morris's avatar
Stephen Morris committed
313
../run_dbutil.sh --upgrade --noconfirm $tempfile
314 315 316 317 318 319 320 321
failzero $?
check_no_backup $tempfile $backupfile
rm -f $tempfile $backupfile


# Test 2 - should fail to check an empty file and fail to upgrade it
echo "2.1. Database is an empty file - check"
touch $tempfile
Stephen Morris's avatar
Stephen Morris committed
322
check_version_fail $tempfile $backupfile
323 324 325 326
rm -f $tempfile $backupfile

echo "2.2. Database is an empty file - upgrade"
touch $tempfile
Stephen Morris's avatar
Stephen Morris committed
327
../run_dbutil.sh --upgrade --noconfirm $tempfile
328 329 330 331 332 333 334 335
failzero $?
# A backup is performed before anything else, so the backup should exist.
check_backup $tempfile $backupfile
rm -f $tempfile $backupfile


echo "3.1. Database is not an SQLite file - check"
echo "This is not an sqlite3 database" > $tempfile
Stephen Morris's avatar
Stephen Morris committed
336 337
check_version_fail $tempfile $backupfile
rm -f $tempfile $backupfile
338 339

echo "3.2. Database is not an SQLite file - upgrade"
Stephen Morris's avatar
Stephen Morris committed
340
echo "This is not an sqlite3 database" > $tempfile
341
../run_dbutil.sh --upgrade --noconfirm $tempfile
342 343 344 345 346 347 348
failzero $?
# ...and as before, a backup should have been created
check_backup $tempfile $backupfile
rm -f $tempfile $backupfile


echo "4.1. Database is an SQLite3 file without the schema table - check"
Stephen Morris's avatar
Stephen Morris committed
349
check_version_fail $testdata/no_schema.sqlite3 $backupfile
350 351 352
rm -f $tempfile $backupfile

echo "4.1. Database is an SQLite3 file without the schema table - upgrade"
Stephen Morris's avatar
Stephen Morris committed
353
upgrade_fail_test $testdata/no_schema.sqlite3 $backupfile
354 355 356 357 358 359 360 361 362
rm -f $tempfile $backupfile


echo "5.1. Database is an old V1 database - check"
check_version $testdata/old_v1.sqlite3 "V1.0"
check_no_backup $tempfile $backupfile
rm -f $tempfile $backupfile

echo "5.2. Database is an old V1 database - upgrade"
Stephen Morris's avatar
Stephen Morris committed
363
upgrade_ok_test $testdata/old_v1.sqlite3 $backupfile
364 365 366 367 368 369 370 371 372
rm -f $tempfile $backupfile


echo "6.1. Database is new V1 database - check"
check_version $testdata/new_v1.sqlite3 "V1.0"
check_no_backup $tempfile $backupfile
rm -f $tempfile $backupfile

echo "6.2. Database is a new V1 database - upgrade"
Stephen Morris's avatar
Stephen Morris committed
373
upgrade_ok_test $testdata/new_v1.sqlite3 $backupfile
374 375 376 377 378 379 380 381 382
rm -f $tempfile $backupfile


echo "7.1. Database is V2.0 database - check"
check_version $testdata/v2_0.sqlite3 "V2.0"
check_no_backup $tempfile $backupfile
rm -f $tempfile $backupfile

echo "7.2. Database is a V2.0 database - upgrade"
Stephen Morris's avatar
Stephen Morris committed
383
upgrade_ok_test $testdata/v2_0.sqlite3 $backupfile
384 385 386
rm -f $tempfile $backupfile


Stephen Morris's avatar
Stephen Morris committed
387 388 389 390 391 392
echo "8.1. Database is V2.0 database with empty schema table - check"
check_version_fail $testdata/empty_version.sqlite3 $backupfile
rm -f $tempfile $backupfile

echo "8.2. Database is V2.0 database with empty schema table - upgrade"
upgrade_fail_test $testdata/empty_version.sqlite3 $backupfile
393 394 395
rm -f $tempfile $backupfile


Stephen Morris's avatar
Stephen Morris committed
396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415
echo "9.1. Database is V2.0 database with over-full schema table - check"
check_version_fail $testdata/too_many_version.sqlite3 $backupfile
rm -f $tempfile $backupfile

echo "9.2. Database is V2.0 database with over-full schema table - upgrade"
upgrade_fail_test $testdata/too_many_version.sqlite3 $backupfile
rm -f $tempfile $backupfile


echo "10.0. Upgrade corrupt database"
upgrade_fail_test $testdata/corrupt.sqlite3 $backupfile
rm -f $tempfile $backupfile


echo "11. Record count test"
record_count_test $testdata/new_v1.sqlite3
rm -f $tempfile $backupfile


echo "12. Backup file already exists"
416 417
touch $backupfile
touch ${backupfile}-1
Stephen Morris's avatar
Stephen Morris committed
418
upgrade_ok_test $testdata/v2_0.sqlite3 ${backupfile}-2
419 420 421
rm -f $tempfile $backupfile ${backupfile}-1 ${backupfile}-2


Stephen Morris's avatar
Stephen Morris committed
422 423
echo "13.1 Command-line errors"
copy_file $testdata/old_v1.sqlite3 $tempfile
Stephen Morris's avatar
Stephen Morris committed
424
../run_dbutil.sh $tempfile
425
failzero $?
Stephen Morris's avatar
Stephen Morris committed
426
../run_dbutil.sh --upgrade --check $tempfile
427
failzero $?
Stephen Morris's avatar
Stephen Morris committed
428 429
../run_dbutil.sh --noconfirm --check $tempfile
failzero $?
Stephen Morris's avatar
Stephen Morris committed
430 431 432 433
../run_dbutil.sh --check
failzero $?
../run_dbutil.sh --upgrade --noconfirm
failzero $?
Stephen Morris's avatar
Stephen Morris committed
434
../run_dbutil.sh --check $tempfile $backupfile
435
failzero $?
Stephen Morris's avatar
Stephen Morris committed
436 437
../run_dbutil.sh --upgrade --noconfirm $tempfile $backupfile
failzero $?
438 439
rm -f $tempfile $backupfile

Stephen Morris's avatar
Stephen Morris committed
440 441
echo "13.2 verbose flag"
copy_file $testdata/old_v1.sqlite3 $tempfile
Stephen Morris's avatar
Stephen Morris committed
442
../run_dbutil.sh --upgrade --noconfirm --verbose $tempfile
443 444 445
passzero $?
rm -f $tempfile $backupfile

Stephen Morris's avatar
Stephen Morris committed
446 447
echo "13.3 Interactive prompt - yes"
copy_file $testdata/old_v1.sqlite3 $tempfile
Stephen Morris's avatar
Stephen Morris committed
448
../run_dbutil.sh --upgrade $tempfile << .
449 450 451 452 453 454
Yes
.
passzero $?
check_version $tempfile "V2.0"
rm -f $tempfile $backupfile

Stephen Morris's avatar
Stephen Morris committed
455 456
echo "13.4 Interactive prompt - no"
copy_file $testdata/old_v1.sqlite3 $tempfile
Stephen Morris's avatar
Stephen Morris committed
457
../run_dbutil.sh --upgrade $tempfile << .
458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476
no
.
passzero $?
diff $testdata/old_v1.sqlite3 $tempfile > /dev/null
passzero $?
rm -f $tempfile $backupfile


# Report the result
if [ $failcount -eq 0 ]; then
    echo "PASS: $testname"
elif [ $failcount -eq 1 ]; then
    echo "FAIL: $testname - 1 test failed"
else
    echo "FAIL: $testname - $failcount tests failed"
fi

# Exit with appropriate error status
exit $failcount