ChangeLog 58.2 KB
Newer Older
1
257.	[bug]           y-aharen
2 3 4 5 6
	Fixed a bug an instance of IntervalTimerImpl may be destructed 
	while deadline_timer is holding the handler. This fix addresses
	occasional failure of IntervalTimerTest.destructIntervalTimer.
	(Trac #957, git TBD)

7 8 9
256.	[bug]		jerry
	src/bin/xfrin: update xfrin to check TSIG before other part of
	incoming message.
chenzhengzhang's avatar
chenzhengzhang committed
10
	(Trac955, git 261450e93af0b0406178e9ef121f81e721e0855c)
11

12 13 14 15 16
255.	[func]		zhang likun
	src/lib/cache:  remove empty code in lib/cache and the corresponding
	suppression rule in	src/cppcheck-suppress.lst.
	(Trac639, git 4f714bac4547d0a025afd314c309ca5cb603e212)

17 18 19 20
254.	[bug]		jinmei
	b10-xfrout: failed to send notifies over IPv6 correctly.
	(Trac964, git 3255c92714737bb461fb67012376788530f16e40)

Jelte Jansen's avatar
Jelte Jansen committed
21 22 23 24 25
253.    [func]		jelte
	Add configuration options for logging through the virtual module
	Logging.
	(Trac 736, git 9fa2a95177265905408c51d13c96e752b14a0824)

26 27 28 29
252.    [func]      	stephen
	Add syslog as destination for logging.
	(Trac976, git 31a30f5485859fd3df2839fc309d836e3206546e)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
30 31 32 33 34 35 36 37 38
251.	[bug]*		jinmei
	Make sure bindctl private files are non readable to anyone except
	the owner or users in the same group.  Note that if BIND 10 is run
	with changing the user, this change means that the file owner or
	group will have to be adjusted.  Also note that this change is
	only effective for a fresh install; if these files already exist,
	their permissions must be adjusted by hand (if necessary).
	(Trac870, git 461fc3cb6ebabc9f3fa5213749956467a14ebfd4)

39
250.    [bug]           ocean
40 41 42 43
	src/lib/util/encode, in some conditions, the DecodeNormalizer's
	iterator may reach the end() and when later being dereferenced
	it will cause crash on some platform.
	(Trac838, git 83e33ec80c0c6485d8b116b13045b3488071770f)
44

45
249.    [func]      	jerry
46
	xfrout: add support for TSIG verification.
47
	(Trac816, git 3b2040e2af2f8139c1c319a2cbc429035d93f217)
48

49
248.    [func]      	stephen
Stephen Morris's avatar
Stephen Morris committed
50 51 52
	Add file and stderr as destinations for logging.
	(Trac555, git 38b3546867425bd64dbc5920111a843a3330646b)

53
247.    [func]      	jelte
Jelte Jansen's avatar
Jelte Jansen committed
54 55 56
	Upstream queries from the resolver now set EDNS0 buffer size.
	(Trac834, git 48e10c2530fe52c9bde6197db07674a851aa0f5d)

57
246.    [func]      	stephen
58 59 60
	Implement logging using log4cplus (http://log4cplus.sourceforge.net)
	(Trac899, git 31d3f525dc01638aecae460cb4bc2040c9e4df10)

61
245.    [func]      	vorner
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
62 63 64 65 66 67
	Authoritative server can now sign the answers using TSIG
	(configured in tsig_keys/keys, list of strings like
	"name:<base64-secret>:sha1-hmac"). It doesn't use them for
	ACL yet, only verifies them and signs if the request is signed.
	(Trac875, git fe5e7003544e4e8f18efa7b466a65f336d8c8e4d)

68 69 70 71 72 73 74 75
244.	[func] 		stephen
	In unit tests, allow the choice of whether unhandled exceptions are
	caught in the unit test program (and details printed) or allowed to
	propagate to the default exception handler.  See the bind10-dev thread
	https://lists.isc.org/pipermail/bind10-dev/2011-January/001867.html
	for more details.
	(Trac #542, git 1aa773d84cd6431aa1483eb34a7f4204949a610f)

76
243.	[func]*		feng
77
	Add optional hmac algorithm SHA224/384/812.
78
	(Trac#782, git 77d792c9d7c1a3f95d3e6a8b721ac79002cd7db1)
Jeremy C. Reed's avatar
Jeremy C. Reed committed
79

80 81
bind10-devel-20110519 released on May 19, 2011

82 83 84 85 86 87 88 89 90 91 92
242.	[func]		jinmei
	xfrin: added support for TSIG verify.  This change completes TSIG
	support in b10-xfrin.
	(Trac #914, git 78502c021478d97672232015b7df06a7d52e531b)

241.	[func]		jinmei
	pydnspp: added python extension for the TSIG API introduced in
	change 235.
	(Trac #905, git 081891b38f05f9a186814ab7d1cd5c572b8f777f)
	(Trac #915, git 0555ab65d0e43d03b2d40c95d833dd050eea6c23)

Jelte Jansen's avatar
Jelte Jansen committed
93 94 95 96
240.	[func]*		jelte
	Updated configuration options to Xfrin, so that you can specify
	a master address, port, and TSIG key per zone. Still only one per
	zone at this point, and TSIG keys are (currently) only specified
97 98 99
	by their full string representation. This replaces the
	Xfrin/master_addr, Xfrin/master_port, and short-lived
	Xfrin/tsig_key configurations with a Xfrin/zones list.
Jelte Jansen's avatar
Jelte Jansen committed
100 101
	(Trac #811, git 88504d121c5e08fff947b92e698a54d24d14c375)

102
239.	[bug]		jerry
103
	src/bin/xfrout: If a zone doesn't have notify slaves (only has
104 105 106 107
	one apex ns record - the primary master name server) will cause
	b10-xfrout uses 100% of CPU.
	(Trac #684, git d11b5e89203a5340d4e5ca51c4c02db17c33dc1f)

zhanglikun's avatar
zhanglikun committed
108
238.	[func]		zhang likun
109
	Implement the simplest forwarder, which pass everything through
zhanglikun's avatar
zhanglikun committed
110 111 112
	except QID, port number. The response will not be cached.
	(Trac #598_new, git 8e28187a582820857ef2dae9b13637a3881f13ba)

113
237.	[bug]		naokikambe
Naoki Kambe's avatar
Naoki Kambe committed
114 115 116 117 118 119 120 121 122 123 124
	Resolved that the stats module wasn't configurable in bindctl in
	spite of its having configuration items. The configuration part
	was removed from the original spec file "stats.spec" and was
	placed in a new spec file "stats-schema.spec". Because it means
	definitions of statistics items. The command part is still
	there. Thus stats module currently has no its own configuration,
	and the items in "stats-schema.spec" are neither visible nor
	configurable through bindctl. "stats-schema.spec" is shared with
	stats module and stats-httpd module, and maybe with other
	statistical modules in future. "stats.spec" has own configuration
	and commands of stats module, if it requires.
Naoki Kambe's avatar
Naoki Kambe committed
125
	(Trac#719, git a234b20dc6617392deb8a1e00eb0eed0ff353c0a)
126

Jelte Jansen's avatar
Jelte Jansen committed
127 128 129 130 131 132
236.	[func]		jelte
	C++ client side of configuration now uses BIND10 logging system.
	It also has improved error handling when communicating with the
	rest of the system.
	(Trac #743, git 86632c12308c3ed099d75eb828f740c526dd7ec0)

133 134 135 136 137 138 139 140 141 142 143
235.	[func]		jinmei
	libdns++: added support for TSIG signing and verification.  It can
	be done using a newly introduced TSIGContext class.
	Note: we temporarily disabled support for truncated signature
	and modified some part of the code introduced in #226 accordingly.
	We plan to fix this pretty soon.
	(Trac #812, git ebe0c4b1e66d359227bdd1bd47395fee7b957f14)
	(Trac #871, git 7c54055c0e47c7a0e36fcfab4b47ff180c0ca8c8)
	(Trac #813, git ffa2f0672084c1f16e5784cdcdd55822f119feaa)
	(Trac #893, git 5aaa6c0f628ed7c2093ecdbac93a2c8cf6c94349)

Jeremy C. Reed's avatar
Jeremy C. Reed committed
144
234.	[func]		jerry
145 146
	src/bin/xfrin: update xfrin to use TSIG. Currently it only supports
	sending a signed TSIG request or SOA request.
chenzhengzhang's avatar
chenzhengzhang committed
147
	(Trac #815, git a892818fb13a1839c82104523cb6cb359c970e88)
148

Jeremy C. Reed's avatar
Jeremy C. Reed committed
149
233.	[func]		stephen
150 151 152
	Added new-style logging statements to the NSAS code.
	(Trac #745, git ceef68cd1223ae14d8412adbe18af2812ade8c2d)

Jeremy C. Reed's avatar
Jeremy C. Reed committed
153 154 155 156 157 158
232.	[func]		stephen
	To facilitate the writing of extended descriptions in
	message files, altered the message file format.  The message
	is now flagged with a "%" as the first non-blank character
	in the line and the lines in the extended description are
	no longer preceded by a "+".
159 160
	(Trac #900, git b395258c708b49a5da8d0cffcb48d83294354ba3)

Jeremy C. Reed's avatar
Jeremy C. Reed committed
161
231.	[func]*		vorner
162
    The logging interface changed slightly. We use
Jeremy C. Reed's avatar
Jeremy C. Reed committed
163 164 165 166 167
	logger.foo(MESSAGE_ID).arg(bar); instead of logger.foo(MESSAGE_ID,
	bar); internally. The message definitions use '%1,%2,...'
	instead of '%s,%d', which allows us to cope better with
	mismatched placeholders and allows reordering of them in
	case of translation.
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
168 169
	(Trac901, git 4903410e45670b30d7283f5d69dc28c2069237d6)

Naoki Kambe's avatar
Naoki Kambe committed
170
230.	[bug]		naokikambe
Naoki Kambe's avatar
Naoki Kambe committed
171 172 173
	Removed too repeated verbose messages in two cases of:
	 - when auth sends statistics data to stats
	 - when stats receives statistics data from other modules
Naoki Kambe's avatar
Naoki Kambe committed
174
	(Trac#620, git 0ecb807011196eac01f281d40bc7c9d44565b364)
Naoki Kambe's avatar
Naoki Kambe committed
175

176 177 178 179 180 181 182 183 184 185 186 187 188
229.	[doc]		jreed
	Add manual page for b10-host.
	(git a437d4e26b81bb07181ff35a625c540703eee845)

228.	[func]*		jreed
	The host tool is renamed to b10-host. While the utility is
	a work in progress, it is expected to now be shipped with
	tarballs. Its initial goal was to be a host(1) clone,
	rewritten in C++ from scratch and using BIND 10's libdns++.
	It now supports the -a (any), -c class, -d (verbose) switches
	and has improved output.
	(Trac #872, git d846851699d5c76937533adf9ff9d948dfd593ca)

189 190 191 192 193 194
227.	[build]		jreed
	Add missing libdns++ rdata files for the distribution (this
	fixes distcheck error). Change three generated libdns++
	headers to "nodist" so they aren't included in the distribution
	(they were mistakenly included in last tarball).

Jelte Jansen's avatar
Jelte Jansen committed
195 196 197 198
226.	[func]*		jelte
	Introduced an API for cryptographic operations. Currently it only
	supports HMAC, intended for use with TSIG. The current
	implementation uses Botan as the backend library.
199 200
	This introduces a new dependency, on Botan.  Currently only Botan
	1.8.x works; older or newer versions don't.
201
	(Trac #781, git 9df42279a47eb617f586144dce8cce680598558a)
Jelte Jansen's avatar
Jelte Jansen committed
202

203
225.	[func]		naokikambe
204
	Added the HTTP/XML interface (b10-stats-httpd) to the
205 206
	statistics feature in BIND 10. b10-stats-httpd is a standalone
	HTTP server and it requests statistics data to the stats
207
	daemon (b10-stats) and sends it to HTTP clients in XML
208 209
	format. Items of the data collected via b10-stats-httpd
	are almost equivalent to ones which are collected via
210 211
	bindctl. Since it also can send XSL (Extensible Stylesheet
	Language) document and XSD (XML Schema definition) document,
212 213
	XML document is human-friendly to view through web browsers
	and its data types are strictly defined.
214
	(Trac #547, git 1cbd51919237a6e65983be46e4f5a63d1877b1d3)
Naoki Kambe's avatar
Naoki Kambe committed
215

JINMEI Tatuya's avatar
JINMEI Tatuya committed
216 217 218 219 220 221 222 223
224.	[bug]		jinmei
	b10-auth, src/lib/datasrc: inconsistency between the hot spot
	cache and actual data source could cause a crash while query
	processing.  The crash could happen, e.g., when an sqlite3 DB file
	is being updated after a zone transfer while b10-auth handles a
	query using the corresponding sqlite3 data source.
	(Trac #851, git 2463b96680bb3e9a76e50c38a4d7f1d38d810643)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
224
223.	[bug]		feng
225 226 227
	If ip address or port isn't usable for name server, name
	server process won't exist and give end user chance to
	reconfigure them.
hanfeng's avatar
hanfeng committed
228
	(Trac #775, git 572ac2cf62e18f7eb69d670b890e2a3443bfd6e7)
hanfeng's avatar
hanfeng committed
229

230 231 232 233 234 235 236
222.	[bug]*		jerry
	src/lib/zonemgr: Fix a bug that xfrin not checking for new
	copy of zone on startup.  Imposes some random jitters to
	avoid many zones need to do refresh at the same time. This
	removed the Zonemgr/jitter_scope setting and introduced
	Zonemgr/refresh_jitter and Zonemgr/reload_jitter.
	(Trac #387, git 1241ddcffa16285d0a7bb01d6a8526e19fbb70cb)
237

chenzhengzhang's avatar
chenzhengzhang committed
238 239
221.	[func]*		jerry
	src/lib/util: Create C++ utility library.
240
	(Trac #749, git 084d1285d038d31067f8cdbb058d626acf03566d)
chenzhengzhang's avatar
chenzhengzhang committed
241

242
220.	[func]		stephen
243 244
	Added the 'badpacket' program for testing; it sends a set of
	(potentially) bad packets to a nameserver and prints the responses.
245
	(Trac #703, git 1b666838b6c0fe265522b30971e878d9f0d21fde)
246

247
219.	[func]		ocean
248 249 250
	src/lib: move some dns related code out of asiolink library to
	asiodns library
	(Trac #751, git 262ac6c6fc61224d54705ed4c700dadb606fcb1c)
Ocean Wang's avatar
Ocean Wang committed
251

252 253 254 255
218.	[func]		jinmei
	src/lib/dns: added support for RP RDATA.
	(Trac #806, git 4e47d5f6b692c63c907af6681a75024450884a88)

256
217.	[bug]		jerry
257 258 259
	src/lib/dns/python: Use a signed version of larger size of
	integer and perform more strict range checks with
	PyArg_ParseTuple() in case of overflows.
chenzhengzhang's avatar
chenzhengzhang committed
260
	(Trac #363, git ce281e646be9f0f273229d94ccd75bf7e08d17cf)
chenzhengzhang's avatar
chenzhengzhang committed
261

262
216.	[func]		vorner
263 264 265
	The BIND10_XFROUT_SOCKET_FILE environment variable can be
	used to specify which socket should be used for communication
	between b10-auth and b10-xfrout. Mostly for testing reasons.
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
266 267
	(Trac #615, git 28b01ad5bf72472c824a7b8fc4a8dc394e22e462)

268
215.	[func]		vorner
269 270 271 272
	A new process, b10-sockcreator, is added, which will create
	sockets for the rest of the system.  It is the only part
	which will need to keep the root privileges. However, only
	the process exists, nothing can talk to it yet.
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
273 274
	(Trac #366, git b509cbb77d31e388df68dfe52709d6edef93df3f)

275
214.	[func]*		vorner
276 277 278 279
	Zone manager no longer thinks it is secondary master for
	all zones in the database. They are listed in
	Zonemgr/secondary_zones configuration variable (in the form
	[{"name": "example.com", "class": "IN"}]).
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
280
	(Trac #670, git 7c1e4d5e1e28e556b1d10a8df8d9486971a3f052)
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
281

282
213.	[bug]		naokikambe
283 284 285 286 287 288 289 290
	Solved incorrect datetime of "bind10.boot_time" and also
	added a new command "sendstats" for Bob. This command is
	to send statistics data to the stats daemon immediately.
	The solved problem is that statistics data doesn't surely
	reach to the daemon because Bob sent statistics data to
	the daemon while it is starting. So the daemon invokes the
	command for Bob after it starts up. This command is also
	useful for resending statistics data via bindctl manually.
Naoki Kambe's avatar
Naoki Kambe committed
291
	(Trac #521, git 1c269cbdc76f5dc2baeb43387c4d7ccc6dc863d2)
Naoki Kambe's avatar
Naoki Kambe committed
292

293
212.	[bug]		naokikambe
294 295
	Fixed that the ModuleCCSession object may group_unsubscribe in the
	closed CC session in being deleted.
Naoki Kambe's avatar
Naoki Kambe committed
296
	(Trac #698, git 0355bddc92f6df66ef50b920edd6ec3b27920d61)
297

298
211.	[func]		shane
299
	Implement "--brittle" option, which causes the server to exit
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
300
	if any of BIND 10's processes dies.
301
	(Trac #788, git 88c0d241fe05e5ea91b10f046f307177cc2f5bc5)
302

303
210.	[bug]		jerry
304 305
	src/bin/auth: fixed a bug where type ANY queries don't provide
	additional glue records for ANSWER section.
306
	(Trac #699, git 510924ebc57def8085cc0e5413deda990b2abeee)
307

308 309
bind10-devel-20110322 released on March 22, 2011

310
209.	[func]		jelte
Jelte Jansen's avatar
Jelte Jansen committed
311 312 313 314 315
	Resolver now uses the NSAS when looking for a nameserver to
	query for any specific zone. This also includes keeping track of
	the RTT for that nameserver.
	(Trac #495, git 76022a7e9f3ff339f0f9f10049aa85e5784d72c5)

316
208.	[bug]*		jelte
Jelte Jansen's avatar
Jelte Jansen committed
317 318 319 320 321
	Resolver now answers REFUSED on queries that are not for class IN.
	This includes the various CH TXT queries, which will be added
	later.
	(git 012f9e78dc611c72ea213f9bd6743172e1a2ca20)

322
207.	[func]		jelte
Jelte Jansen's avatar
Jelte Jansen committed
323 324 325 326
	Resolver now starts listening on localhost:53 if no configuration
	is set.
	(Trac #471, git 1960b5becbba05570b9c7adf5129e64338659f07)

327
206.	[func]		shane
328
	Add the ability to list the running BIND 10 processes using the
Shane Kerr's avatar
Shane Kerr committed
329
	command channel. To try this, use "Boss show_processes".
330
	(Trac #648, git 451bbb67c2b5d544db2f7deca4315165245d2b3b)
Shane Kerr's avatar
Shane Kerr committed
331

332
205.	[bug]		jinmei
JINMEI Tatuya's avatar
JINMEI Tatuya committed
333 334 335 336 337 338
	b10-auth, src/lib/datasrc: fixed a bug where b10-auth could return
	an empty additional section for delegation even if some glue is
	crucial when it fails to find some other glue records in its data
	source.
	(Trac #646, git 6070acd1c5b2f7a61574eda4035b93b40aab3e2b)

339
204.	[bug]		jinmei
340 341 342 343 344 345
	b10-auth, src/lib/datasrc: class ANY queries were not handled
	correctly in the generic data source (mainly for sqlite3).  It
	could crash b10-auth in the worst case, and could result in
	incorrect responses in some other cases.
	(Trac #80, git c65637dd41c8d94399bd3e3cee965b694b633339)

346
203.	[bug]		zhang likun
347 348
	Fix resolver cache memory leak: when cache is destructed, rrset
	and message entries in it are not destructed properly.
349
	(Trac #643, git aba4c4067da0dc63c97c6356dc3137651755ffce)
zhanglikun's avatar
zhanglikun committed
350

351
202.	[func]		vorner
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
352
	It is possible to specify a different directory where we look for
353 354 355
	configuration files (by -p) and different configuration file to
	use (-c).  Also, it is possible to specify the port on which
	cmdctl should listen (--cmdctl-port).
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
356 357
	(Trac #615, git 5514dd78f2d61a222f3069fc94723ca33fb3200b)

358
201.	[bug]		jerry
359 360 361
	src/bin/bindctl: bindctl doesn't show traceback on shutdown.
	(Trac #588, git 662e99ef050d98e86614c4443326568a0b5be437)

362
200.	[bug]		Jelte
Jelte Jansen's avatar
Jelte Jansen committed
363 364 365
	Fixed a bug where incoming TCP connections were not closed.
	(Trac #589, git 1d88daaa24e8b1ab27f28be876f40a144241e93b)

366
199.	[func]		ocean
367 368 369
	Cache negative responses (NXDOMAIN/NODATA) from authoritative
	server for recursive resolver.
	(Trac #493, git f8fb852bc6aef292555063590c361f01cf29e5ca)
Ocean Wang's avatar
Ocean Wang committed
370

371
198.	[bug]		jinmei
372 373 374 375 376 377 378
	b10-auth, src/lib/datasrc: fixed a bug where hot spot cache failed
	to reuse cached SOA for negative responses.  Due to this bug
	b10-auth returned SERVFAIL when it was expected to return a
	negative response immediately after a specific SOA query for
	the zone.
	(Trac #626, git 721a53160c15e8218f6798309befe940b9597ba0)

379
197.	[bug]		zhang likun
zhanglikun's avatar
zhanglikun committed
380 381 382 383 384
	Remove expired message and rrset entries when looking up them
	in cache, touch or remove the rrset entry in cache properly
	when doing lookup or update.
	(Trac #661, git 9efbe64fe3ff22bb5fba46de409ae058f199c8a7)

385
196.	[bug]		jinmei
zhanglikun's avatar
zhanglikun committed
386 387 388 389 390
	b10-auth, src/lib/datasrc: the backend of the in-memory data
	source could not handle the root name.  As a result b10-auth could
	not work as a root server when using the in-memory data source.
	(Trac #683, git 420ec42bd913fb83da37b26b75faae49c7957c46)

391
195.	[func]		stephen
Naoki Kambe's avatar
Naoki Kambe committed
392 393 394 395
	Resolver will now re-try a query over TCP if a response to a UDP
	query has the TC bit set.
	(Trac #499, git 4c05048ba059b79efeab53498737abe94d37ee07)

396
194.	[bug]		vorner
Naoki Kambe's avatar
Naoki Kambe committed
397 398 399 400 401 402
	Solved a 100% CPU usage problem after switching addresses in b10-auth
	(and possibly, but unconfirmed, in b10-resolver). It was caused by
	repeated reads/accepts on closed socket (the bug was in the code for a
	long time, recent changes made it show).
	(Trac #657, git e0863720a874d75923ea66adcfbf5b2948efb10a)

403
193.	[func]*		jreed
Naoki Kambe's avatar
Naoki Kambe committed
404 405 406 407 408
	Listen on the IPv6 (::) and IPv4 (0.0.0.0) wildcard addresses
	for b10-auth. This returns to previous behavior prior to
	change #184. Document the listen_on configuration in manual.
	(Trac #649, git 65a77d8fde64d464c75917a1ab9b6b3f02640ca6)

409
192.	[func]*		jreed
Naoki Kambe's avatar
Naoki Kambe committed
410 411 412 413
	Listen on standard domain port 53 for b10-auth and
	b10-resolver.
	(Trac #617, #618, git 137a6934a14cf0c5b5c065e910b8b364beb0973f)

414
191.	[func]		jinmei
Naoki Kambe's avatar
Naoki Kambe committed
415 416 417 418 419 420 421 422 423
	Imported system test framework of BIND 9.  It can be run by
	'make systest' at the top source directory.  Notes: currently it
	doesn't work when built in a separate tree.  It also requires
	perl, an inherited dependency from the original framework.
	Also, mainly for the purpose of tests, a new option "--pid-file"
	was added to BoB, with which the boss process will dump its PID
	to the specified file.
	(Trac #606, git 6ac000df85625f5921e8895a1aafff5e4be3ba9c)

424
190.	[func]		jelte
Naoki Kambe's avatar
Naoki Kambe committed
425 426 427 428
	Resolver now sets random qids on outgoing queries using
	the boost::mt19937 prng.
	(Trac #583, git 5222b51a047d8f2352bc9f92fd022baf1681ed81)

429
189.	[bug]		jreed
Naoki Kambe's avatar
Naoki Kambe committed
430 431 432
	Do not install the log message compiler.
	(Trac #634, git eb6441aca464980d00e3ff827cbf4195c5a7afc5)

433
188.	[bug]		zhang likun
434 435 436
	Make the rrset trust level ranking algorithm used by
	isc::cache::MessageEntry::getRRsetTrustLevel() follow RFC2181
	section 5.4.1.
zhanglikun's avatar
zhanglikun committed
437
	(Trac #595 git 19197b5bc9f2955bd6a8ca48a2d04472ed696e81)
438

439
187.	[bug]		zhang likun
zhanglikun's avatar
zhanglikun committed
440 441 442 443
	Fix the assert error in class isc::cache::RRsetCache by adding the
	check for empty pointer and test case for it.
	(Trac #638, git 54e61304131965c4a1d88c9151f8697dcbb3ce12)

444
186.	[bug]		jelte
Jelte Jansen's avatar
Jelte Jansen committed
445 446 447 448 449
	b10-resolver could stop with an assertion failure on certain kinds
	of messages (there was a problem in error message creation). This
	fixes that.
	(Trac #607, git 25a5f4ec755bc09b54410fcdff22691283147f32)

450
185.	[bug]		vorner
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
451 452 453 454
	Tests use port from private range (53210), lowering chance of
	a conflict with something else (eg. running bind 10).
	(Trac #523, git 301da7d26d41e64d87c0cf72727f3347aa61fb40)

455
184.	[func]*		vorner
456 457 458 459
	Listening address and port configuration of b10-auth is the same as
	for b10-resolver now. That means, it is configured through bindctl
	at runtime, in the Auth/listen_on list, not through command line
	arguments.
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
460 461
	(Trac #575, #576, git f06ce638877acf6f8e1994962bf2dbfbab029edf)

462
183.	[bug]		jerry
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
463
	src/bin/xfrout: Enable parallel sessions between xfrout server and
464 465
	muti-Auth. The session needs to be created only on the first time
	or if an error occur.
466
	(Trac #419, git 1d60afb59e9606f312caef352ecb2fe488c4e751)
467

468
182.	[func]		jinmei
469 470 471 472 473 474 475 476 477
	Support cppcheck for static code check on C++ code.  If cppcheck
	is available, 'make cppcheck' on the top source directory will run
	the checker and should cleanly complete with an exit code of 0
	(at least with cppcheck 1.47).
	Note: the suppression list isn't included in the final
	distributions.  It should be created by hand or retrieved from
	the git repository.
	(Trac #613, git b973f67520682b63ef38b1451d309be9f4f4b218)

478
181.	[func]		feng
479
	Add stop interface into dns server, so we can stop each running
480
	server individually. With it, user can reconfigure her running server
481
	with different ip address or port.
482
	(Trac #388, git 6df94e2db856c1adc020f658cc77da5edc967555)
483

484
180.	[build]		jreed
Jeremy C. Reed's avatar
Jeremy C. Reed committed
485
	Fix custom DESTDIR for make install. Patch from Jan Engelhardt.
486
	(Trac #629, git 5ac67ede03892a5eacf42ce3ace1e4e376164c9f)
487

488 489
bind10-devel-20110224 released on February 24, 2011

490
179.	[func]		vorner
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
491 492 493 494 495 496
	It is possible to start and stop resolver and authoritative
	server without restart of the whole system. Change of the
	configuration (Boss/start_auth and Boss/start_resolver) is
	enough.
	(Trac #565, git 0ac0b4602fa30852b0d86cc3c0b4730deb1a58fe)

497
178.	[func]		jelte
Jelte Jansen's avatar
Jelte Jansen committed
498 499 500
	Resolver now makes (limited) use of the cache
	(Trac #491, git 8b41f77f0099ddc7ca7d34d39ad8c39bb1a8363c)

501
177.	[func]		stephen
502 503 504 505 506
	The upstream fetch code in asiolink is now protocol agnostic to
	allow for the addition of fallback to TCP if a fetch response
	indicates truncation.
	(Trac #554, git 9739cbce2eaffc7e80640db58a8513295cf684de)

507
176.	[func]		likun
508 509
	src/lib/cache: Rename one interface: from lookupClosestRRset()
	to lookupDeepestNS(), and remove one parameter of it.
510
	(Trac #492, git ecbfb7cf929d62a018dd4cdc7a841add3d5a35ae)
511

512
175.	[bug]		jerry
513 514 515 516
	src/bin/xfrout: Xfrout use the case-sensitive mode to compress
	names in an AXFR massage.
	(Trac #253, git 004e382616150f8a2362e94d3458b59bb2710182)

517
174.	[bug]*		jinmei
518 519 520 521 522 523 524 525
	src/lib/dns: revised dnssectime functions so that they don't rely
	on the time_t type (whose size varies on different systems, which
	can lead to subtle bugs like some form of "year 2038 problem").
	Also handled 32-bit wrap around issues more explicitly, with more
	detailed tests.  The function API has been changed, but the effect
	should be minimal because these functions are mostly private.
	(Trac #61, git 09ece8cdd41c0f025e8b897b4883885d88d4ba5d)

526
173.	[bug]		jerry
527 528 529 530 531
	python/isc/notify: A notify_out test fails without network
	connectivity, encapsulate the socket behavior using a mock
	socket class to fix it.
	(Trac #346, git 319debfb957641f311102739a15059f8453c54ce)

532
172.	[func]		jelte
Jelte Jansen's avatar
Jelte Jansen committed
533 534 535 536 537
	Improved the bindctl cli in various ways, mainly concerning
	list and map item addressing, the correct display of actual values,
	and internal help.
	(Trac #384, git e5fb3bc1ed5f3c0aec6eb40a16c63f3d0fc6a7b2)

538
171.	[func]		vorner
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
539 540 541 542
	b10-auth, src/lib/datasrc: in memory data source now works as a
	complete data source for authoritative DNS servers and b10-auth
	uses it.  It still misses major features, however, including
	DNSSEC support and zone transfer.
543
	(Last Trac #553, but many more,
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
544
	git 6f031a09a248e7684723c000f3e8cc981dcdb349)
545

546
170.	[bug]		jinmei
547 548 549 550 551 552
	Tightened validity checks in the NSEC3 constructors, both "from
	"text" and "from wire".  Specifically, wire data containing
	invalid type bitmaps or invalid lengths of salt or hash is now
	correctly rejected.
	(Trac #117, git 9c690982f24fef19c747a72f43c4298333a58f48)

553
169.	[func]		jelte
Jelte Jansen's avatar
Jelte Jansen committed
554 555
	Added a basic implementation for a resolver cache (though not
	used yet).
556
	(Trac #449, git 8aa3b2246ae095bbe7f855fd11656ae3bdb98986)
Jelte Jansen's avatar
Jelte Jansen committed
557

558
168.	[bug]		vorner
559 560 561
	Boss no longer has the -f argument, which was undocumented and
	stayed as a relict of previous versions, currently causing only
	strange behaviour.
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
562 563
	(Trac #572, git 17f237478961005707d649a661cc72a4a0d612d4)

564
167.	[bug]		naokikambe
565
	Fixed failure of termination of msgq_test.py with python3
566
	coverage (3.3.1).
567
	(Trac #573, git 0e6a18e12f61cc482e07078776234f32605312e5)
568

569
166.	[func]		jelte
Jelte Jansen's avatar
Jelte Jansen committed
570 571 572
	The resolver now sends back a SERVFAIL when there is a client
	timeout (timeout_client config setting), but it will not stop
	resolving (until there is a lookup timeout or a result).
573
	(Trac #497 and #489, git af0e5cd93bebb27cb5c4457f7759d12c8bf953a6)
Jelte Jansen's avatar
Jelte Jansen committed
574

575
165.	[func]		jelte
Jelte Jansen's avatar
Jelte Jansen committed
576 577 578
	The resolver now handles CNAMEs, it will follow them, and include
	them in the answer. The maximum length of CNAME chains that is
	supported is 16.
579
	(Trac #497, git af0e5cd93bebb27cb5c4457f7759d12c8bf953a6)
Jelte Jansen's avatar
Jelte Jansen committed
580

581
164.	[bug]		y-aharen
Yoshitaka Aharen's avatar
Yoshitaka Aharen committed
582 583 584 585
	IntervalTimer: Modified the interface to accept interval in
	milliseconds. It shortens the time of the tests of IntervalTimer.
	(Trac #452, git c9f6acc81e24c4b8f0eb351123dc7b43f64e0914)

586
163.	[func]		vorner
587 588 589 590
	The pimpl design pattern is used in UDPServer, with a shared
	pointer. This makes it smaller to copy (which is done a lot as a
	sideeffect of being coroutine) and speeds applications of this
	class (notably b10-auth) up by around 10%.
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
591 592
	(Trac #537, git 94cb95b1d508541201fc064302ba836164d3cbe6)

593
162.	[func]		stephen
594 595 596 597 598 599 600 601
	Added C++ logging, allowing logging at different severities.
	Code specifies the message to be logged via a symbol, and the
	logging code picks up the message from an in-built dictionary.
	The contents of the dictionary can be replaced at run-time by
	locale-specific messages.  A message compiler program is provided
	to create message header files and supply the default messages.
	(Trac #438, git 7b1606cea7af15dc71f5ec1d70d958b00aa98af7)

602
161.	[func]		stephen
603 604 605
	Added ResponseScrubber class to examine response from
	a server and to remove out-of-bailiwick RRsets.  Also
	does cross-section checks to ensure consistency.
606
	(Trac #496, git b9296ca023cc9e76cda48a7eeebb0119166592c5)
607

608
160.	[func]		jelte
Jelte Jansen's avatar
Jelte Jansen committed
609 610 611 612 613
  	Updated the resolver to take 3 different timeout values;
	timeout_query for outstanding queries we sent while resolving
	timeout_client for sending an answer back to the client
	timeout_lookup for stopping the resolving
	(currently 2 and 3 have the same final effect)
614
	(Trac #489, git 578ea7f4ba94dc0d8a3d39231dad2be118e125a2)
Jelte Jansen's avatar
Jelte Jansen committed
615

616
159.	[func]		smann
chenzhengzhang's avatar
chenzhengzhang committed
617 618 619 620 621 622
	The resolver now has a configurable set of root servers to start
	resolving at (called root_addresses). By default these are not
	(yet) filled in. If empty, a hardcoded address for f-root will be
	used right now.
	(Trac #483, git a07e078b4feeb01949133fc88c9939254c38aa7c)

623
158.	[func]		jelte
Jelte Jansen's avatar
Jelte Jansen committed
624 625 626 627 628 629 630
	The Resolver module will now do (very limited) resolving, if not
	set to forwarding mode (i.e. if the configuration option
	forward_addresses is left empty). It only supports referrals that
	contain glue addresses at this point, and does no other processing
	of authoritative answers.
	(Trac #484, git 7b84de4c0e11f4a070e038ca4f093486e55622af)

631
157.	[bug]		vorner
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
632 633 634 635
	One frozen process no longer freezes the whole b10-msgq. It caused the
	whole system to stop working.
	(Trac #420, git 93697f58e4d912fa87bc7f9a591c1febc9e0d139)

636
156.	[func]		stephen
637 638 639 640
	Added ResponseClassifier class to examine response from
	a server and classify it into one of several categories.
	(Trac #487, git 18491370576e7438c7893f8551bbb8647001be9c)

Jelte Jansen's avatar
Jelte Jansen committed
641 642
bind10-devel-20110120 released on January 20, 2011

643
155.	[doc]		jreed
644 645 646 647
	Miscellaneous documentation improvements for man pages and
	the guide, including auth, resolver, stats, xfrout, and
	zonemgr.  (git c14c4741b754a1eb226d3bdc3a7abbc4c5d727c0)

648
154.	[bug]		jinmei
JINMEI Tatuya's avatar
JINMEI Tatuya committed
649 650 651 652 653
	b10-xfrin/b10-zonemgr: Fixed a bug where these programs didn't
	receive command responses from CC sessions.  Eventually the
	receive buffer became full, and many other components that rely
	on CC channels would stall (as noted in #420 and #513).  This is
	an urgent care fix due to the severity of the problem; we'll need
654 655
	to revisit it for cleaner fix later.
	(Trac #516, git 62c72fcdf4617e4841e901408f1e7961255b8194)
JINMEI Tatuya's avatar
JINMEI Tatuya committed
656

657
153.	[bug]		jelte
Jelte Jansen's avatar
Jelte Jansen committed
658 659 660 661
	b10-cfgmgr: Fixed a bug where configuration updates sometimes
	lost previous settings in the configuration manager.
	(Trac #427, git 2df894155657754151e0860e2ca9cdbed7317c70)

662
152.	[func]*		jinmei
JINMEI Tatuya's avatar
JINMEI Tatuya committed
663 664 665 666 667 668
	b10-auth: Added new configuration variable "statistics-interval"
	to allow the user to change the timer interval for periodic
	statistics updates.  The update can also be disabled by setting
	the value to 0.  Disabling statistics updates will also work as
	a temporary workaround of a known issue that b10-auth can block in
	sending statistics and stop responding to queries as a result.
669
	(Trac #513, git 285c5ee3d5582ed6df02d1aa00387f92a74e3695)
JINMEI Tatuya's avatar
JINMEI Tatuya committed
670

671
151.	[bug]		smann
Scott Mann's avatar
Scott Mann committed
672
	lib/log/dummylog.h: 
673 674 675 676
	lib/log/dummylog.cc: Modify dlog so that it takes an optional
	2nd argument of type bool (true or false). This flag, if
	set, will cause the message to be printed whether or not
	-v is chosen.
677
        (Trac #432, git 880220478c3e8702d56d761b1e0b21b77d08ee5a)
JINMEI Tatuya's avatar
JINMEI Tatuya committed
678

679
150.	[bug]		jelte
Jelte Jansen's avatar
Jelte Jansen committed
680
	b10-cfgmgr: No longer save the configuration on exit. Configuration
Jeremy C. Reed's avatar
Jeremy C. Reed committed
681
	is already saved if it is changed successfully, so writing it on
Jelte Jansen's avatar
Jelte Jansen committed
682 683 684 685
	exit (and hence, when nothing has changed too) is unnecessary and
	may even cause problems.
	(Trac #435, git fd7baa38c08d54d5b5f84930c1684c436d2776dc)

686
149.	[bug]		jelte
Jelte Jansen's avatar
Jelte Jansen committed
687 688 689
	bindctl: Check if the user session has disappeared (either by a
	timeout or by a server restart), and reauthenticate if so. This
	fixes the 'cmdctl not running' problem.
690
        (Trac #431, git b929be82fec5f92e115d8985552f84b4fdd385b9)
Jelte Jansen's avatar
Jelte Jansen committed
691

692
148.	[func]		jelte
Jelte Jansen's avatar
Jelte Jansen committed
693 694 695 696 697 698
	bindctl: Command results are now pretty-printed (i.e. printed in
	a more readable form). Empty results are no longer printed at all
	(used to print '{}'), and the message
	'send the command to cmd-ctrl' has also been removed.
	(git 3954c628c13ec90722a2d8816f52a380e0065bae)

699
147.	[bug]		jinmei
700 701
	python/isc/config: Fixed a bug that importing custom configuration
	(in b10-config.db) of a remote module didn't work.
702
	(Trac #478, git ea4a481003d80caf2bff8d0187790efd526d72ca)
703

704
146.	[func]		jelte
Jelte Jansen's avatar
Jelte Jansen committed
705 706 707 708 709 710
	Command arguments were not validated internally against their
	specifications. This change fixes that (on the C++ side, Python
	side depends on an as yet planned addition). Note: this is only
	an added internal check, the cli already checks format.
	(Trac #473, git 5474eba181cb2fdd80e2b2200e072cd0a13a4e52)

711
145.	[func]*		jinmei
712 713 714 715 716
	b10-auth: added a new command 'loadzone' for (re)loading a
	specific zone.  The command syntax is generic but it is currently
	only feasible for class IN in memory data source.  To reload a
	zone "example.com" via bindctl, execute the command as follows:
	> Auth loadzone origin = example.com
717 718
	(Trac #467 git 4f7e1f46da1046de527ab129a88f6aad3dba7562
	from 1d7d3918661ba1c6a8b1e40d8fcbc5640a84df12)
719

720
144.	[build]		jinmei
JINMEI Tatuya's avatar
JINMEI Tatuya committed
721 722 723 724 725 726 727
	Introduced a workaround for clang++ build on FreeBSD (and probably
	some other OSes).  If building BIND 10 fails with clang++ due to
	a link error about "__dso_handle", try again from the configure
	script with CXX_LIBTOOL_LDFLAGS=-L/usr/lib (the path actually
	doesn't matter; the important part is the -L flag).  This
	workaround is not automatically enabled as it's difficult to
	detect the need for it dynamically, and must be enabled via the
728 729
	variable by hand.
	(Trac #474, git cfde436fbd7ddf3f49cbbd153999656e8ca2a298)
JINMEI Tatuya's avatar
JINMEI Tatuya committed
730

731
143.	[build]		jinmei
JINMEI Tatuya's avatar
JINMEI Tatuya committed
732 733 734
	Fixed build problems with clang++ in unit tests due to recent
	changes.  No behavior change. (Trac #448, svn r4133)

735
142.	[func]		jinmei
JINMEI Tatuya's avatar
JINMEI Tatuya committed
736 737 738 739 740 741
	b10-auth: updated query benchmark so that it can test in memory
	data source.  Also fixed a bug that the output buffer isn't
	cleared after query processing, resulting in misleading results
	or program crash.  This is a regression due to change #135.
	(Trac #465, svn r4103)

742
141.	[bug]		jinmei
JINMEI Tatuya's avatar
JINMEI Tatuya committed
743 744 745 746
	b10-auth: Fixed a bug that the authoritative server includes
	trailing garbage data in responses.  This is a regression due to
	change #135. (Trac #462, svn r4081)

747
140.	[func]		y-aharen
748
	src/bin/auth: Added a feature to count queries and send counter
749
	values to statistics periodically. To support it, added wrapping
750
	class of asio::deadline_timer to use as interval timer.
751 752
	The counters can be seen using the "Stats show" command from
	bindctl.  The result would look like:
753
	  ... "auth.queries.tcp": 1, "auth.queries.udp": 1 ...
754 755
	Using the "Auth sendstats" command you can make b10-auth send the
	counters to b10-stats immediately.
756 757
	(Trac #347, svn r4026)

758
139.	[build]		jreed
759
	Introduced configure option and make targets for generating
Jeremy C. Reed's avatar
Jeremy C. Reed committed
760 761 762 763
	Python code coverage report. This adds new make targets:
	report-python-coverage and clean-python-coverage. The C++
	code coverage targets were renamed to clean-cpp-coverage
	and report-cpp-coverage. (Trac #362, svn r4023)
764

765
138.	[func]*		jinmei
JINMEI Tatuya's avatar
JINMEI Tatuya committed
766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781
	b10-auth: added a configuration interface to support in memory
	data sources.  For example, the following command to bindctl
	will configure a memory data source containing the "example.com"
	zone with the zone file named "example.com.zone":
	> config set Auth/datasources/ [{"type": "memory", "zones": \
	 [{"origin": "example.com", "file": "example.com.zone"}]}]
	By default, the memory data source is disabled; it must be
	configured explicitly.  To disable it again, specify a null list
	for Auth/datasources:
	> config set Auth/datasources/ []
	Notes: it's currently for class IN only.  The zone files are not
	actually loaded into memory yet (which will soon be implemented).
	This is an experimental feature and the syntax may change in
	future versions.
	(Trac #446, svn r3998)

782
137.	[bug]		jreed
Jeremy C. Reed's avatar
Jeremy C. Reed committed
783 784
	Fix run_*.sh scripts that are used for development testing
	so they use a msgq socket file in the build tree.
Jeremy C. Reed's avatar
Jeremy C. Reed committed
785
	(Trac #226, svn r3989)
Jeremy C. Reed's avatar
Jeremy C. Reed committed
786

787
136.	[bug]		jelte
Jelte Jansen's avatar
Jelte Jansen committed
788 789 790 791 792 793
  	bindctl (and the configuration manager in general) now no longer
	accepts 'unknown' data; i.e. data for modules that it does not know
	about, or configuration items that are not specified in the .spec
	files.
	(Trac #202, svn r3967)

794
135.	[func]		each
795
	Add b10-resolver. This is an example recursive server that
796 797 798
	currently does forwarding only and no caching.
	(Trac #327, svn r3903)

799
134.	[func]		vorner
800
	b10-resolver supports timeouts and retries in forwarder mode.
Michal Vaner's avatar
Michal Vaner committed
801 802
	(Trac #401, svn r3660)

803
133.	[func]		vorner
Michal Vaner's avatar
Michal Vaner committed
804
	New temporary logging function available in isc::log. It is used by
805
	b10-resolver.
Michal Vaner's avatar
Michal Vaner committed
806 807
	(Trac #393, r3602)

808
132.	[func]		vorner
809
	The b10-resolver is configured through config manager.
Michal Vaner's avatar
Michal Vaner committed
810 811 812
	It has "listen_on" and "forward_addresses" options.
	(Trac #389, r3448)

813
131.	[func]		jerry
814 815 816 817 818 819
	src/lib/datasrc: Introduced two template classes RBTree and RBNode
	to provide the generic map with domain name as key and anything as
	the value. Because of some unresolved design issue, the new classes
	are only intended to be used by memory zone and zone table.
	(Trac #397, svn r3890)

820
130.	[func]		jerry
821
	src/lib/datasrc: Introduced a new class MemoryDataSrc to provide
822 823
	the general interface for memory data source.  For the initial
	implementation, we don't make it a derived class of AbstractDataSrc
824 825
	because the interface is so different (we'll eventually
	consider this as part of the generalization work).
Jerry's avatar
Jerry committed
826
	(Trac #422, svn r3866)
827

828
129.	[func]		jinmei
829 830 831 832 833 834
	src/lib/dns: Added new functions masterLoad() for loading master
	zone files.  The initial implementation can only parse a limited
	form of master files, but BIND 9's named-compilezone can convert
	any valid zone file into the acceptable form.
	(Trac #423, svn r3857)

835
128.	[build]		vorner
836 837
	Test for query name = '.', type = DS to authoritative nameserver
	for root zone was added.
Michal Vaner's avatar
Michal Vaner committed
838 839
	(Trac #85, svn r3836)

840
127.	[bug]		stephen
Stephen Morris's avatar
Stephen Morris committed
841 842 843 844
	During normal operation process termination and resurrection messages
	are now output regardless of the state of the verbose flag.
	(Trac #229, svn r3828)

845
126.	[func]		ocean
Michal Vaner's avatar
Michal Vaner committed
846 847 848 849 850
	The Nameserver Address Store (NSAS) component has been added. It takes
	care of choosing an IP address of a nameserver when a zone needs to be
	contacted.
	(Trac #356, Trac #408, svn r3823)

Jeremy C. Reed's avatar
Jeremy C. Reed committed
851 852
bind10-devel-20101201 released on December 01, 2010

853
125.	[func]		jelte
Jelte Jansen's avatar
Jelte Jansen committed
854 855
	Added support for addressing individual list items in bindctl
	configuration commands; If you have an element that is a list, you
856
	can use foo[X]		integer
Jelte Jansen's avatar
Jelte Jansen committed
857 858 859
	(starting at 0)
	(Trac #405, svn r3739)

860
124.	[bug]		jreed
861 862 863
	Fix some wrong version reporting. Now also show the version
	for the component and BIND 10 suite. (Trac #302, svn r3696)

864
123.	[bug]		jelte
865 866
	src/bin/bindctl printed values had the form of python literals
	(e.g. 'True'), while the input requires valid JSON (e.g. 'true').
867
	Output changed to JSON format for consistency. (svn r3694)
868

869
122.	[func]		stephen
870 871
	src/bin/bind10: Added configuration options to Boss to determine
	whether to start the authoritative server, recursive server (or
872
	both). A dummy program has been provided for test purposes.
873
	(Trac #412, svn r3676)
874

875
121.	[func]		jinmei
876 877 878 879
	src/lib/dns: Added support for TSIG RDATA.  At this moment this is
	not much of real use, however, because no protocol support was
	added yet.  It will soon be added. (Trac #372, svn r3649)

880
120.	[func]		jinmei
JINMEI Tatuya's avatar
JINMEI Tatuya committed
881 882 883
	src/lib/dns: introduced two new classes, TSIGKey and TSIGKeyRing,
	to manage TSIG keys. (Trac #381, svn r3622)

884
119.	[bug]		jinmei
JINMEI Tatuya's avatar
JINMEI Tatuya committed
885 886 887 888 889 890 891
	The master file parser of the python datasrc module incorrectly
	regarded a domain name beginning with a decimal number as a TTL
	specification.  This confused b10-loadzone and had it reject to
	load a zone file that contains such a name.
	Note: this fix is incomplete and the loadzone would still be
	confused if the owner name is a syntactically indistinguishable
	from a TTL specification.  This is part of a more general issue
892
	and will be addressed in Trac #413. (Trac #411, svn r3599)
JINMEI Tatuya's avatar
JINMEI Tatuya committed
893

894
118.	[func]		jinmei
Jeremy C. Reed's avatar
Jeremy C. Reed committed
895 896 897 898 899
	src/lib/dns: changed the interface of
	AbstractRRset::getRdataIterator() so that the internal
	cursor would point to the first RDATA automatically.  This
	will be a more intuitive and less error prone behavior.
	This is a backward compatible change. (Trac #410, r3595)
JINMEI Tatuya's avatar
JINMEI Tatuya committed
900

901
117.	[func]		jinmei
JINMEI Tatuya's avatar
JINMEI Tatuya committed
902 903 904 905 906
	src/lib/datasrc: added new zone and zone table classes for the
	support of in memory data source.  This is an intermediate step to
	the bigger feature, and is not yet actually usable in practice.
	(Trac #399, svn r3590)

907
116.	[bug]		jerry
908 909 910 911 912
	src/bin/xfrout: Xfrout and Auth will communicate by long tcp
	connection, Auth needs to make a new connection only on the first
	time or if an error occurred.
	(Trac #299, svn r3482)

913
115.	[func]*		jinmei
JINMEI Tatuya's avatar
JINMEI Tatuya committed
914 915 916 917 918 919
	src/lib/dns: Changed DNS message flags and section names from
	separate classes to simpler enums, considering the balance between
	type safety and usability.  API has been changed accordingly.
	More documentation and tests were provided with these changes.
	(Trac #358, r3439)

920
114.	[build]		jinmei
JINMEI Tatuya's avatar
JINMEI Tatuya committed
921 922 923
	Supported clang++.  Note: Boost >= 1.44 is required.
	(Trac #365, svn r3383)

924
113.	[func]*		zhanglikun
925
	Folder name 'utils'(the folder in /src/lib/python/isc/) has been
Likun Zhang's avatar
Likun Zhang committed
926 927 928
	renamed	to 'util'. Programs that used 'import isc.utils.process'
	now need to use 'import isc.util.process'. The folder
	/src/lib/python/isc/Util is removed since it isn't used by any
929
	program. (Trac #364, r3382)
Likun Zhang's avatar
Likun Zhang committed
930

931
112.	[func]		zhang likun
Likun Zhang's avatar
Likun Zhang committed
932
	Add one mixin class to override the naive serve_forever() provided
Jeremy C. Reed's avatar
Jeremy C. Reed committed
933
	in python library socketserver. Instead of polling for shutdown
Likun Zhang's avatar
Likun Zhang committed
934
	every poll_interval seconds, one socketpair is used to wake up
Jeremy C. Reed's avatar
Jeremy C. Reed committed
935
	the waiting server. (Trac #352, svn r3366)
Likun Zhang's avatar
Likun Zhang committed
936

937
111.	[bug]*		Vaner
Jeremy C. Reed's avatar
Jeremy C. Reed committed
938
	Make sure process xfrin/xfrout/zonemgr/cmdctl can be stopped
Michal Vaner's avatar
Michal Vaner committed
939
	properly when user enter "ctrl+c" or 'Boss shutdown' command
Jeremy C. Reed's avatar
Jeremy C. Reed committed