ChangeLog 40.7 KB
Newer Older
Shane Kerr's avatar
Shane Kerr committed
1 2 3 4 5
  XXX.  [func]		shane
    Add the ability to list the running BIND 10 processes using the
	command channel. To try this, use "Boss show_processes".
	(Trac #648, git yyy)

6 7 8 9 10
  184.  [func]*      vorner
	Listening address and port configuration of b10-auth is the same as
	for b10-resolver now. That means, it is configured through bindctl
	at runtime, in the Auth/listen_on list, not through command line
	arguments.
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
11 12
	(Trac #575, #576, git f06ce638877acf6f8e1994962bf2dbfbab029edf)

13
  183.  [bug]      jerry
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
14
	src/bin/xfrout: Enable parallel sessions between xfrout server and
15 16
	muti-Auth. The session needs to be created only on the first time
	or if an error occur.
17
	(Trac #419, git 1d60afb59e9606f312caef352ecb2fe488c4e751)
18

19 20 21 22 23 24 25 26 27 28
  182.	[func]		jinmei
	Support cppcheck for static code check on C++ code.  If cppcheck
	is available, 'make cppcheck' on the top source directory will run
	the checker and should cleanly complete with an exit code of 0
	(at least with cppcheck 1.47).
	Note: the suppression list isn't included in the final
	distributions.  It should be created by hand or retrieved from
	the git repository.
	(Trac #613, git b973f67520682b63ef38b1451d309be9f4f4b218)

29
  181.  [func]      feng
30
	Add stop interface into dns server, so we can stop each running
31
	server individually. With it, user can reconfigure her running server
32
	with different ip address or port.
33
	(Trac #388, git 6df94e2db856c1adc020f658cc77da5edc967555)
34

35
  180.  [build]     jreed
Jeremy C. Reed's avatar
Jeremy C. Reed committed
36
	Fix custom DESTDIR for make install. Patch from Jan Engelhardt.
37
	(Trac #629, git 5ac67ede03892a5eacf42ce3ace1e4e376164c9f)
38

39 40
bind10-devel-20110224 released on February 24, 2011

Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
41 42 43 44 45 46 47
  179.  [func]      vorner
	It is possible to start and stop resolver and authoritative
	server without restart of the whole system. Change of the
	configuration (Boss/start_auth and Boss/start_resolver) is
	enough.
	(Trac #565, git 0ac0b4602fa30852b0d86cc3c0b4730deb1a58fe)

Jelte Jansen's avatar
Jelte Jansen committed
48 49 50 51
  178.  [func]      jelte
	Resolver now makes (limited) use of the cache
	(Trac #491, git 8b41f77f0099ddc7ca7d34d39ad8c39bb1a8363c)

52 53 54 55 56 57
  177.  [func]      stephen
	The upstream fetch code in asiolink is now protocol agnostic to
	allow for the addition of fallback to TCP if a fetch response
	indicates truncation.
	(Trac #554, git 9739cbce2eaffc7e80640db58a8513295cf684de)

58 59 60
  176.  [func]      zhang likun
	src/lib/cache: Rename one interface: from lookupClosestRRset()
	to lookupDeepestNS(), and remove one parameter of it.
61
	(Trac #492, git ecbfb7cf929d62a018dd4cdc7a841add3d5a35ae)
62

63 64 65 66 67
  175.	[bug]		jerry
	src/bin/xfrout: Xfrout use the case-sensitive mode to compress
	names in an AXFR massage.
	(Trac #253, git 004e382616150f8a2362e94d3458b59bb2710182)

68 69 70 71 72 73 74 75 76
  174.	[bug]*		jinmei
	src/lib/dns: revised dnssectime functions so that they don't rely
	on the time_t type (whose size varies on different systems, which
	can lead to subtle bugs like some form of "year 2038 problem").
	Also handled 32-bit wrap around issues more explicitly, with more
	detailed tests.  The function API has been changed, but the effect
	should be minimal because these functions are mostly private.
	(Trac #61, git 09ece8cdd41c0f025e8b897b4883885d88d4ba5d)

77 78 79 80 81 82
  173.	[bug]		jerry
	python/isc/notify: A notify_out test fails without network
	connectivity, encapsulate the socket behavior using a mock
	socket class to fix it.
	(Trac #346, git 319debfb957641f311102739a15059f8453c54ce)

Jelte Jansen's avatar
Jelte Jansen committed
83 84 85 86 87 88
  172.  [func]      jelte
	Improved the bindctl cli in various ways, mainly concerning
	list and map item addressing, the correct display of actual values,
	and internal help.
	(Trac #384, git e5fb3bc1ed5f3c0aec6eb40a16c63f3d0fc6a7b2)

Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
89 90 91 92 93
  171.  [func]      feng, jerry, jinmei, vorner
	b10-auth, src/lib/datasrc: in memory data source now works as a
	complete data source for authoritative DNS servers and b10-auth
	uses it.  It still misses major features, however, including
	DNSSEC support and zone transfer.
JINMEI Tatuya's avatar
JINMEI Tatuya committed
94
	(Last trac #553, but many more,
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
95
	git 6f031a09a248e7684723c000f3e8cc981dcdb349)
96

97 98 99 100 101 102 103
  170.	[bug]		jinmei
	Tightened validity checks in the NSEC3 constructors, both "from
	"text" and "from wire".  Specifically, wire data containing
	invalid type bitmaps or invalid lengths of salt or hash is now
	correctly rejected.
	(Trac #117, git 9c690982f24fef19c747a72f43c4298333a58f48)

104
  169.  [func]      zhang likun, jelte
Jelte Jansen's avatar
Jelte Jansen committed
105 106
	Added a basic implementation for a resolver cache (though not
	used yet).
107
	(Trac #449, git 8aa3b2246ae095bbe7f855fd11656ae3bdb98986)
Jelte Jansen's avatar
Jelte Jansen committed
108

Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
109
  168.  [bug]       vorner
110 111 112
	Boss no longer has the -f argument, which was undocumented and
	stayed as a relict of previous versions, currently causing only
	strange behaviour.
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
113 114
	(Trac #572, git 17f237478961005707d649a661cc72a4a0d612d4)

115
  167.  [bug]           naokikambe
116 117
	Fixed failure of termination of msgq_test.py with python3
	coverage(3.3.1)
118
	(Trac #573, git 0e6a18e12f61cc482e07078776234f32605312e5)
119

Jelte Jansen's avatar
Jelte Jansen committed
120 121 122 123
  166.  [func]      jelte
	The resolver now sends back a SERVFAIL when there is a client
	timeout (timeout_client config setting), but it will not stop
	resolving (until there is a lookup timeout or a result).
124
	(Trac #497 and #489, git af0e5cd93bebb27cb5c4457f7759d12c8bf953a6)
Jelte Jansen's avatar
Jelte Jansen committed
125 126 127 128 129

  165.  [func]      jelte
	The resolver now handles CNAMEs, it will follow them, and include
	them in the answer. The maximum length of CNAME chains that is
	supported is 16.
130
	(Trac #497, git af0e5cd93bebb27cb5c4457f7759d12c8bf953a6)
Jelte Jansen's avatar
Jelte Jansen committed
131

Yoshitaka Aharen's avatar
Yoshitaka Aharen committed
132 133 134 135 136
  164.  [bug]           y-aharen
	IntervalTimer: Modified the interface to accept interval in
	milliseconds. It shortens the time of the tests of IntervalTimer.
	(Trac #452, git c9f6acc81e24c4b8f0eb351123dc7b43f64e0914)

Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
137
  163.  [func]      vorner
138 139 140 141
	The pimpl design pattern is used in UDPServer, with a shared
	pointer. This makes it smaller to copy (which is done a lot as a
	sideeffect of being coroutine) and speeds applications of this
	class (notably b10-auth) up by around 10%.
Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
142 143
	(Trac #537, git 94cb95b1d508541201fc064302ba836164d3cbe6)

144 145 146 147 148 149 150 151 152
  162.  [func]		stephen
	Added C++ logging, allowing logging at different severities.
	Code specifies the message to be logged via a symbol, and the
	logging code picks up the message from an in-built dictionary.
	The contents of the dictionary can be replaced at run-time by
	locale-specific messages.  A message compiler program is provided
	to create message header files and supply the default messages.
	(Trac #438, git 7b1606cea7af15dc71f5ec1d70d958b00aa98af7)

153 154 155 156
  161.  [func]		stephen
	Added ResponseScrubber class to examine response from
	a server and to remove out-of-bailiwick RRsets.  Also
	does cross-section checks to ensure consistency.
157
	(Trac #496, git b9296ca023cc9e76cda48a7eeebb0119166592c5)
158

Jelte Jansen's avatar
Jelte Jansen committed
159 160 161 162 163 164 165 166
  160.  [func]		jelte
  	Updated the resolver to take 3 different timeout values;
	timeout_query for outstanding queries we sent while resolving
	timeout_client for sending an answer back to the client
	timeout_lookup for stopping the resolving
	(currently 2 and 3 have the same final effect)
	(Trac 489, git 578ea7f4ba94dc0d8a3d39231dad2be118e125a2)

chenzhengzhang's avatar
chenzhengzhang committed
167 168 169 170 171 172 173
  159.	[func]		smann
	The resolver now has a configurable set of root servers to start
	resolving at (called root_addresses). By default these are not
	(yet) filled in. If empty, a hardcoded address for f-root will be
	used right now.
	(Trac #483, git a07e078b4feeb01949133fc88c9939254c38aa7c)

Jelte Jansen's avatar
Jelte Jansen committed
174 175 176 177 178 179 180 181
  158.	[func]		jelte
	The Resolver module will now do (very limited) resolving, if not
	set to forwarding mode (i.e. if the configuration option
	forward_addresses is left empty). It only supports referrals that
	contain glue addresses at this point, and does no other processing
	of authoritative answers.
	(Trac #484, git 7b84de4c0e11f4a070e038ca4f093486e55622af)

Michal 'vorner' Vaner's avatar
Michal 'vorner' Vaner committed
182 183 184 185 186
  157.  [bug]       vorner
	One frozen process no longer freezes the whole b10-msgq. It caused the
	whole system to stop working.
	(Trac #420, git 93697f58e4d912fa87bc7f9a591c1febc9e0d139)

187 188 189 190 191
  156.	[func]		stephen
	Added ResponseClassifier class to examine response from
	a server and classify it into one of several categories.
	(Trac #487, git 18491370576e7438c7893f8551bbb8647001be9c)

Jelte Jansen's avatar
Jelte Jansen committed
192 193
bind10-devel-20110120 released on January 20, 2011

194 195 196 197 198
  155.	[doc]		jreed
	Miscellaneous documentation improvements for man pages and
	the guide, including auth, resolver, stats, xfrout, and
	zonemgr.  (git c14c4741b754a1eb226d3bdc3a7abbc4c5d727c0)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
199 200 201 202 203 204
  154.	[bug]		jinmei
	b10-xfrin/b10-zonemgr: Fixed a bug where these programs didn't
	receive command responses from CC sessions.  Eventually the
	receive buffer became full, and many other components that rely
	on CC channels would stall (as noted in #420 and #513).  This is
	an urgent care fix due to the severity of the problem; we'll need
205 206
	to revisit it for cleaner fix later.
	(Trac #516, git 62c72fcdf4617e4841e901408f1e7961255b8194)
JINMEI Tatuya's avatar
JINMEI Tatuya committed
207

Jelte Jansen's avatar
Jelte Jansen committed
208 209 210 211 212
  153.	[bug]		jelte
	b10-cfgmgr: Fixed a bug where configuration updates sometimes
	lost previous settings in the configuration manager.
	(Trac #427, git 2df894155657754151e0860e2ca9cdbed7317c70)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
213 214 215 216 217 218 219
  152.	[func]*		jinmei
	b10-auth: Added new configuration variable "statistics-interval"
	to allow the user to change the timer interval for periodic
	statistics updates.  The update can also be disabled by setting
	the value to 0.  Disabling statistics updates will also work as
	a temporary workaround of a known issue that b10-auth can block in
	sending statistics and stop responding to queries as a result.
220
	(Trac #513, git 285c5ee3d5582ed6df02d1aa00387f92a74e3695)
JINMEI Tatuya's avatar
JINMEI Tatuya committed
221

Scott Mann's avatar
Scott Mann committed
222 223 224 225 226 227
  151.  [bug]		smann
	lib/log/dummylog.h: 
	lib/log/dummylog.cc: Modify dlog so that it takes an optional 2nd
        argument of type bool (true or false). This flag, if set, will cause
        the message to be printed whether or not -v is chosen.
        (trac #432, git 880220478c3e8702d56d761b1e0b21b77d08ee5a)
JINMEI Tatuya's avatar
JINMEI Tatuya committed
228

Jelte Jansen's avatar
Jelte Jansen committed
229 230
  150.  [bug]		jelte
	b10-cfgmgr: No longer save the configuration on exit. Configuration
Jeremy C. Reed's avatar
Jeremy C. Reed committed
231
	is already saved if it is changed successfully, so writing it on
Jelte Jansen's avatar
Jelte Jansen committed
232 233 234 235
	exit (and hence, when nothing has changed too) is unnecessary and
	may even cause problems.
	(Trac #435, git fd7baa38c08d54d5b5f84930c1684c436d2776dc)

Jelte Jansen's avatar
Jelte Jansen committed
236 237 238 239 240 241
  149.  [bug]		jelte
	bindctl: Check if the user session has disappeared (either by a
	timeout or by a server restart), and reauthenticate if so. This
	fixes the 'cmdctl not running' problem.
        (trac #431, git b929be82fec5f92e115d8985552f84b4fdd385b9)

Jelte Jansen's avatar
Jelte Jansen committed
242 243 244 245 246 247 248
  148.	[func]		jelte
	bindctl: Command results are now pretty-printed (i.e. printed in
	a more readable form). Empty results are no longer printed at all
	(used to print '{}'), and the message
	'send the command to cmd-ctrl' has also been removed.
	(git 3954c628c13ec90722a2d8816f52a380e0065bae)

249 250 251
  147.	[bug]		jinmei
	python/isc/config: Fixed a bug that importing custom configuration
	(in b10-config.db) of a remote module didn't work.
252
	(Trac #478, git ea4a481003d80caf2bff8d0187790efd526d72ca)
253

Jelte Jansen's avatar
Jelte Jansen committed
254 255 256 257 258 259 260
  146.	[func]		jelte
	Command arguments were not validated internally against their
	specifications. This change fixes that (on the C++ side, Python
	side depends on an as yet planned addition). Note: this is only
	an added internal check, the cli already checks format.
	(Trac #473, git 5474eba181cb2fdd80e2b2200e072cd0a13a4e52)

261 262 263 264 265 266
  145.	[func]*		jinmei
	b10-auth: added a new command 'loadzone' for (re)loading a
	specific zone.  The command syntax is generic but it is currently
	only feasible for class IN in memory data source.  To reload a
	zone "example.com" via bindctl, execute the command as follows:
	> Auth loadzone origin = example.com
267 268
	(Trac #467 git 4f7e1f46da1046de527ab129a88f6aad3dba7562
	from 1d7d3918661ba1c6a8b1e40d8fcbc5640a84df12)
269

JINMEI Tatuya's avatar
JINMEI Tatuya committed
270 271 272 273 274 275 276 277
  144.	[build]		jinmei
	Introduced a workaround for clang++ build on FreeBSD (and probably
	some other OSes).  If building BIND 10 fails with clang++ due to
	a link error about "__dso_handle", try again from the configure
	script with CXX_LIBTOOL_LDFLAGS=-L/usr/lib (the path actually
	doesn't matter; the important part is the -L flag).  This
	workaround is not automatically enabled as it's difficult to
	detect the need for it dynamically, and must be enabled via the
278 279
	variable by hand.
	(Trac #474, git cfde436fbd7ddf3f49cbbd153999656e8ca2a298)
JINMEI Tatuya's avatar
JINMEI Tatuya committed
280

JINMEI Tatuya's avatar
JINMEI Tatuya committed
281 282 283 284
  143.	[build]		jinmei
	Fixed build problems with clang++ in unit tests due to recent
	changes.  No behavior change. (Trac #448, svn r4133)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
285 286 287 288 289 290 291
  142.	[func]		jinmei
	b10-auth: updated query benchmark so that it can test in memory
	data source.  Also fixed a bug that the output buffer isn't
	cleared after query processing, resulting in misleading results
	or program crash.  This is a regression due to change #135.
	(Trac #465, svn r4103)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
292 293 294 295 296
  141.	[bug]		jinmei
	b10-auth: Fixed a bug that the authoritative server includes
	trailing garbage data in responses.  This is a regression due to
	change #135. (Trac #462, svn r4081)

297
  140.  [func]		y-aharen
298
	src/bin/auth: Added a feature to count queries and send counter
299
	values to statistics periodically. To support it, added wrapping
300
	class of asio::deadline_timer to use as interval timer.
301 302
	The counters can be seen using the "Stats show" command from
	bindctl.  The result would look like:
303
	  ... "auth.queries.tcp": 1, "auth.queries.udp": 1 ...
304 305
	Using the "Auth sendstats" command you can make b10-auth send the
	counters to b10-stats immediately.
306 307
	(Trac #347, svn r4026)

Jeremy C. Reed's avatar
Jeremy C. Reed committed
308
  139.  [build]		jreed
309
	Introduced configure option and make targets for generating
Jeremy C. Reed's avatar
Jeremy C. Reed committed
310 311 312 313
	Python code coverage report. This adds new make targets:
	report-python-coverage and clean-python-coverage. The C++
	code coverage targets were renamed to clean-cpp-coverage
	and report-cpp-coverage. (Trac #362, svn r4023)
314

JINMEI Tatuya's avatar
JINMEI Tatuya committed
315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331
  138.	[func]*		jinmei
	b10-auth: added a configuration interface to support in memory
	data sources.  For example, the following command to bindctl
	will configure a memory data source containing the "example.com"
	zone with the zone file named "example.com.zone":
	> config set Auth/datasources/ [{"type": "memory", "zones": \
	 [{"origin": "example.com", "file": "example.com.zone"}]}]
	By default, the memory data source is disabled; it must be
	configured explicitly.  To disable it again, specify a null list
	for Auth/datasources:
	> config set Auth/datasources/ []
	Notes: it's currently for class IN only.  The zone files are not
	actually loaded into memory yet (which will soon be implemented).
	This is an experimental feature and the syntax may change in
	future versions.
	(Trac #446, svn r3998)

332
  137.	[bug]		jreed
Jeremy C. Reed's avatar
Jeremy C. Reed committed
333 334
	Fix run_*.sh scripts that are used for development testing
	so they use a msgq socket file in the build tree.
Jeremy C. Reed's avatar
Jeremy C. Reed committed
335
	(Trac #226, svn r3989)
Jeremy C. Reed's avatar
Jeremy C. Reed committed
336

337
  136.  [bug]       jelte
Jelte Jansen's avatar
Jelte Jansen committed
338 339 340 341 342 343
  	bindctl (and the configuration manager in general) now no longer
	accepts 'unknown' data; i.e. data for modules that it does not know
	about, or configuration items that are not specified in the .spec
	files.
	(Trac #202, svn r3967)

344
  135.  [func]      each
345
	Add b10-resolver. This is an example recursive server that
346 347 348
	currently does forwarding only and no caching.
	(Trac #327, svn r3903)

Jelte Jansen's avatar
Jelte Jansen committed
349
  134.  [func]      vorner
350
	b10-resolver supports timeouts and retries in forwarder mode.
Michal Vaner's avatar
Michal Vaner committed
351 352
	(Trac #401, svn r3660)

Jelte Jansen's avatar
Jelte Jansen committed
353
  133.  [func]      vorner
Michal Vaner's avatar
Michal Vaner committed
354
	New temporary logging function available in isc::log. It is used by
355
	b10-resolver.
Michal Vaner's avatar
Michal Vaner committed
356 357
	(Trac #393, r3602)

Jelte Jansen's avatar
Jelte Jansen committed
358
  132.  [func]      vorner
359
	The b10-resolver is configured through config manager.
Michal Vaner's avatar
Michal Vaner committed
360 361 362
	It has "listen_on" and "forward_addresses" options.
	(Trac #389, r3448)

363 364 365 366 367 368 369
  131.  [func]    feng, jerry
	src/lib/datasrc: Introduced two template classes RBTree and RBNode
	to provide the generic map with domain name as key and anything as
	the value. Because of some unresolved design issue, the new classes
	are only intended to be used by memory zone and zone table.
	(Trac #397, svn r3890)

370
  130.	[func]		jerry
371
	src/lib/datasrc: Introduced a new class MemoryDataSrc to provide
372 373 374 375
	the general interface for memory data source.  For the initial
	implementation, we don't make it a derived class of AbstractDataSrc
	because the interface is so different(we'll eventually consider this
	as part of the generalization work).
Jerry's avatar
Jerry committed
376
	(Trac #422, svn r3866)
377

378 379 380 381 382 383 384
  129.	[func]		jinmei
	src/lib/dns: Added new functions masterLoad() for loading master
	zone files.  The initial implementation can only parse a limited
	form of master files, but BIND 9's named-compilezone can convert
	any valid zone file into the acceptable form.
	(Trac #423, svn r3857)

Michal Vaner's avatar
Michal Vaner committed
385
  128.  [build]     vorner
386 387
	Test for query name = '.', type = DS to authoritative nameserver
	for root zone was added.
Michal Vaner's avatar
Michal Vaner committed
388 389
	(Trac #85, svn r3836)

Stephen Morris's avatar
Stephen Morris committed
390 391 392 393 394
  127.  [bug]       stephen
	During normal operation process termination and resurrection messages
	are now output regardless of the state of the verbose flag.
	(Trac #229, svn r3828)

Michal Vaner's avatar
Michal Vaner committed
395 396 397 398 399 400
  126.  [func]      stephen, vorner, ocean
	The Nameserver Address Store (NSAS) component has been added. It takes
	care of choosing an IP address of a nameserver when a zone needs to be
	contacted.
	(Trac #356, Trac #408, svn r3823)

Jeremy C. Reed's avatar
Jeremy C. Reed committed
401 402
bind10-devel-20101201 released on December 01, 2010

Jelte Jansen's avatar
Jelte Jansen committed
403 404 405 406 407 408 409
  125.  [func]		jelte
	Added support for addressing individual list items in bindctl
	configuration commands; If you have an element that is a list, you
	can use foo[X] to address a specific item, where X is an integer
	(starting at 0)
	(Trac #405, svn r3739)

410 411 412 413
  124.  [bug]		jreed
	Fix some wrong version reporting. Now also show the version
	for the component and BIND 10 suite. (Trac #302, svn r3696)

414 415 416
  123.  [bug]		jelte
	src/bin/bindctl printed values had the form of python literals
	(e.g. 'True'), while the input requires valid JSON (e.g. 'true').
417
	Output changed to JSON format for consistency. (svn r3694)
418

419 420 421
  122.  [func]		stephen
	src/bin/bind10: Added configuration options to Boss to determine
	whether to start the authoritative server, recursive server (or
422
	both). A dummy program has been provided for test purposes.
423
	(Trac #412, svn r3676)
424

425 426 427 428 429
  121.  [func]		jinmei
	src/lib/dns: Added support for TSIG RDATA.  At this moment this is
	not much of real use, however, because no protocol support was
	added yet.  It will soon be added. (Trac #372, svn r3649)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
430 431 432 433
  120.  [func]		jinmei
	src/lib/dns: introduced two new classes, TSIGKey and TSIGKeyRing,
	to manage TSIG keys. (Trac #381, svn r3622)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
434 435 436 437 438 439 440 441
  119.	[bug]		jinmei
	The master file parser of the python datasrc module incorrectly
	regarded a domain name beginning with a decimal number as a TTL
	specification.  This confused b10-loadzone and had it reject to
	load a zone file that contains such a name.
	Note: this fix is incomplete and the loadzone would still be
	confused if the owner name is a syntactically indistinguishable
	from a TTL specification.  This is part of a more general issue
442
	and will be addressed in Trac #413. (Trac #411, svn r3599)
JINMEI Tatuya's avatar
JINMEI Tatuya committed
443

JINMEI Tatuya's avatar
JINMEI Tatuya committed
444
  118.	[func]		jinmei
Jeremy C. Reed's avatar
Jeremy C. Reed committed
445 446 447 448 449
	src/lib/dns: changed the interface of
	AbstractRRset::getRdataIterator() so that the internal
	cursor would point to the first RDATA automatically.  This
	will be a more intuitive and less error prone behavior.
	This is a backward compatible change. (Trac #410, r3595)
JINMEI Tatuya's avatar
JINMEI Tatuya committed
450

JINMEI Tatuya's avatar
JINMEI Tatuya committed
451
  117.  [func]		jinmei
JINMEI Tatuya's avatar
JINMEI Tatuya committed
452 453 454 455 456
	src/lib/datasrc: added new zone and zone table classes for the
	support of in memory data source.  This is an intermediate step to
	the bigger feature, and is not yet actually usable in practice.
	(Trac #399, svn r3590)

457 458 459 460 461 462
  116.	[bug]		jerry
	src/bin/xfrout: Xfrout and Auth will communicate by long tcp
	connection, Auth needs to make a new connection only on the first
	time or if an error occurred.
	(Trac #299, svn r3482)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
463 464 465 466 467 468 469
  115.	[func]*		jinmei
	src/lib/dns: Changed DNS message flags and section names from
	separate classes to simpler enums, considering the balance between
	type safety and usability.  API has been changed accordingly.
	More documentation and tests were provided with these changes.
	(Trac #358, r3439)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
470 471 472 473
  114.	[build]		jinmei
	Supported clang++.  Note: Boost >= 1.44 is required.
	(Trac #365, svn r3383)

Likun Zhang's avatar
Likun Zhang committed
474
  113.	[func]*		zhanglikun
475
	Folder name 'utils'(the folder in /src/lib/python/isc/) has been
Likun Zhang's avatar
Likun Zhang committed
476 477 478
	renamed	to 'util'. Programs that used 'import isc.utils.process'
	now need to use 'import isc.util.process'. The folder
	/src/lib/python/isc/Util is removed since it isn't used by any
479
	program. (Trac #364, r3382)
Likun Zhang's avatar
Likun Zhang committed
480

Likun Zhang's avatar
Likun Zhang committed
481
  112.	[func]		zhang likun
Likun Zhang's avatar
Likun Zhang committed
482
	Add one mixin class to override the naive serve_forever() provided
Jeremy C. Reed's avatar
Jeremy C. Reed committed
483
	in python library socketserver. Instead of polling for shutdown
Likun Zhang's avatar
Likun Zhang committed
484
	every poll_interval seconds, one socketpair is used to wake up
Jeremy C. Reed's avatar
Jeremy C. Reed committed
485
	the waiting server. (Trac #352, svn r3366)
Likun Zhang's avatar
Likun Zhang committed
486

Michal Vaner's avatar
Michal Vaner committed
487
  111.	[bug]*   zhanglikun, Michal Vaner
Jeremy C. Reed's avatar
Jeremy C. Reed committed
488
	Make sure process xfrin/xfrout/zonemgr/cmdctl can be stopped
Michal Vaner's avatar
Michal Vaner committed
489
	properly when user enter "ctrl+c" or 'Boss shutdown' command
Jeremy C. Reed's avatar
Jeremy C. Reed committed
490 491
	through bindctl.  The ZonemgrRefresh.run_timer and
	NotifyOut.dispatcher spawn a thread themselves.
Michal Vaner's avatar
Michal Vaner committed
492 493
	(Trac #335, svn r3273)

Michal Vaner's avatar
Michal Vaner committed
494
  110.  [func]      Michal Vaner
JINMEI Tatuya's avatar
JINMEI Tatuya committed
495 496 497
	Added isc.net.check module to check ip addresses and ports for
	correctness and isc.net.addr to hold IP address. The bind10, xfrin
	and cmdctl programs are modified to use it.
Michal Vaner's avatar
Michal Vaner committed
498 499
	(Trac #353, svn r3240)

500 501 502
  109.  [func]		naokikambe
	Added the initial version of the stats module for the statistics
	feature of BIND 10, which supports the restricted features and
503
	items and reports via bindctl command. (Trac #191, r3218)
504 505 506
	Added the document of the stats module, which is about how stats
	module collects the data (Trac #170, [wiki:StatsModule])

507
  108.	[func]		jerry
508 509
	src/bin/zonemgr: Provide customizable configurations for
	lowerbound_refresh, lowerbound_retry, max_transfer_timeout and
510
	jitter_scope. (Trac #340, r3205)
511

512
  107.  [func]       zhang likun
513
	Remove the parameter 'db_file' for command 'retransfer' of
514
	xfrin module. xfrin.spec will not be generated by script.
515
	(Trac #329, r3171)
516

517 518 519
  106.  [bug]       zhang likun
	When xfrin can't connect with one zone's master, it should tell
	the bad news to zonemgr, so that zonemgr can reset the timer for
520
	that zone. (Trac #329, r3170)
521

Michal Vaner's avatar
Michal Vaner committed
522 523 524
  105.  [bug]       Michal Vaner
	Python processes: they no longer take 100% CPU while idle
	due to a busy loop in reading command session in a nonblocking way.
Michal Vaner's avatar
Michal Vaner committed
525
	(Trac #349, svn r3153), (Trac #382, svn r3294)
Michal Vaner's avatar
Michal Vaner committed
526

527 528
  104.	[bug]		jerry
	bin/zonemgr: zonemgr should be attempting to refresh expired zones.
529
	(Trac #336, r3139)
Jeremy C. Reed's avatar
Jeremy C. Reed committed
530
 
531 532
  103.	[bug]		jerry
	lib/python/isc/log: Fixed an issue with python logging,
Jeremy C. Reed's avatar
Jeremy C. Reed committed
533
	python log shouldn't die with OSError. (Trac #267, r3137)
Jeremy C. Reed's avatar
Jeremy C. Reed committed
534
 
JINMEI Tatuya's avatar
JINMEI Tatuya committed
535 536 537 538
  102.	[build]		jinmei
	Disable threads in ASIO to minimize build time dependency.
	(Trac #345, r3100)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
539 540 541 542 543
  101.	[func]		jinmei
	src/lib/dns: Completed Opcode and Rcode implementation with more
	tests and documentation.  API is mostly the same but the
	validation was a bit tightened. (Trac #351, svn r3056)

Michal Vaner's avatar
Michal Vaner committed
544 545 546 547 548
  100.  [func]      Michal Vaner
	Python processes: support naming of python processes so
	they're not all called python3.
	(Trac #322, svn r3052)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
549 550 551 552 553 554
  99.	[func]*		jinmei
	Introduced a separate EDNS class to encapsulate EDNS related
	information more cleanly.  The related APIs are changed a bit,
	although it won't affect most of higher level applications.
	(Trac #311, svn r3020)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
555 556 557 558 559
  98.	[build]		jinmei
	The ./configure script now tries to search some common include
	paths for boost header files to minimize the need for explicit
	configuration with --with-boost-include. (Trac #323, svn r3006)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
560
  97.	[func]		jinmei
561 562 563
	Added a micro benchmark test for query processing of b10-auth.
	(Trac #308, svn r2982)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
564
  96.	[bug]		jinmei
JINMEI Tatuya's avatar
JINMEI Tatuya committed
565
	Fixed two small issues with configure: Do not set CXXFLAGS so that
JINMEI Tatuya's avatar
JINMEI Tatuya committed
566
	it can be customized; Make sure --disable-static works.
JINMEI Tatuya's avatar
JINMEI Tatuya committed
567 568
	(Trac #325, r2976)

Jeremy C. Reed's avatar
Jeremy C. Reed committed
569 570
bind10-devel-20100917 released on September 17, 2010 

Jeremy C. Reed's avatar
Jeremy C. Reed committed
571 572 573 574
  95.	[doc]		jreed
	Add b10-zonemgr manual page. Update other docs to introduce
	this secondary manager. (Trac #341, svn r2951)

Jeremy C. Reed's avatar
Jeremy C. Reed committed
575 576 577 578
  95.	[bug]		jreed
	bin/xfrout and bin/zonemgr: Fixed some stderr output.
	(Trac #342, svn r2949)

Jelte Jansen's avatar
Jelte Jansen committed
579 580 581 582 583 584
  94.	[bug]		jelte
  	bin/xfrout:  Fixed a problem in xfrout where only 2 or 3 RRs
	were used per DNS message in the xfrout stream.
	(Trac #334, r2931)

  93.	[bug]		jinmei
Jeremy C. Reed's avatar
Jeremy C. Reed committed
585 586
	lib/datasrc: A DS query could crash the library (and therefore,
	e.g. the authoritative server) if some RR of the same apex name
587
	is stored in the hot spot cache. (Trac #307, svn r2923)
Jeremy C. Reed's avatar
Jeremy C. Reed committed
588

Jelte Jansen's avatar
Jelte Jansen committed
589 590 591 592 593 594
  92.	[func]*		jelte
	libdns_python (the python wrappers for libdns++) has been renamed
	to pydnspp (Python DNS++). Programs and libraries that used
	'import libdns_python' now need to use 'import pydnspp'.
	(Trac #314, r2902)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
595 596
  91.	[func]*		jinmei
	lib/cc: Use const pointers and const member functions for the API
597
	as much as possible for safer operations.  Basically this does not
JINMEI Tatuya's avatar
JINMEI Tatuya committed
598 599 600 601 602
	change the observable behavior, but some of the API were changed
	in a backward incompatible manner.  This change also involves more
	copies, but at this moment the overhead is deemed acceptable.
	(Trac #310, r2803)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
603 604 605 606 607 608 609
  90.	[build]		jinmei
	(Darwin/Mac OS X specific) Specify DYLD_LIBRARY_PATH for tests and
	experimental run under the source tree.  Without this loadable
	python modules refer to installation paths, which may confuse the
	operation due to version mismatch or even trigger run time errors
	due to missing libraries. (Trac #313, r2782)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
610 611 612 613
  89.	[build]		jinmei
	Generate b10-config.db for tests at build time so that the source
	tree does not have to be writable. (Trac #315, r2776)

Jelte Jansen's avatar
Jelte Jansen committed
614 615 616 617 618 619 620
  88.   [func]		jelte
	Blocking reads on the msgq command channel now have a timeout
	(defaults to 4 seconds, modifiable as needed by modules).
	Because of this, modules will no longer block indefinitely
	if they are waiting for a message that is not sent for whatever
	reason. (Trac #296, r2761)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
621
  87.   [func]		zhanglikun
622 623
	lib/python/isc/notifyout: Add the feature of notify-out, when 
	zone axfr/ixfr finishing, the server will notify its slaves.
Jerry's avatar
Jerry committed
624
	(Trac #289, svn r2737)
625

626 627
  86.	[func]		jerry
	bin/zonemgr: Added zone manager module. The zone manager is one 
628 629
	of the co-operating processes of BIND10, which keeps track of 
	timers and other information necessary for BIND10 to act as a 
Jerry's avatar
Jerry committed
630
	slave. (Trac #215, svn r2737)
631

JINMEI Tatuya's avatar
JINMEI Tatuya committed
632 633 634 635 636 637 638
  85.	[build]*	jinmei
	Build programs using dynamic link by default.  A new configure
	option --enable-static-link is provided to force static link for
	executable programs.  Statically linked programs can be run on a
	debugger more easily and would be convenient for developers.
	(Trac #309, svn r2723)

639 640
bind10-devel-20100812 released on August 12, 2010

JINMEI Tatuya's avatar
JINMEI Tatuya committed
641
  84.	[bug]		jinmei, jerry
JINMEI Tatuya's avatar
JINMEI Tatuya committed
642
	This is a quick fix patch for the issue: AXFR fails half the 
643
	time because of connection problems. xfrout client will make
JINMEI Tatuya's avatar
JINMEI Tatuya committed
644
	a new connection every time. (Trac #299, svn r2697)
645

JINMEI Tatuya's avatar
JINMEI Tatuya committed
646
  83.	[build]*	jreed
647
	The configure --with-boost-lib option is removed. It was not
Jeremy C. Reed's avatar
Jeremy C. Reed committed
648
	used since the build included ASIO. (svn r2684)
649

JINMEI Tatuya's avatar
JINMEI Tatuya committed
650
  82.	[func]		jinmei
JINMEI Tatuya's avatar
JINMEI Tatuya committed
651
	bin/auth: Added -u option to change the effective process user
JINMEI Tatuya's avatar
JINMEI Tatuya committed
652 653 654 655
	of the authoritative server after invocation.  The same option to
	the boss process will be propagated to b10-auth, too.
	(Trac #268, svn r2675)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
656 657 658 659 660
  81.	[func]		jinmei
	Added a C++ framework for micro benchmark tests.  A supplemental
	library functions to build query data for the tests were also
	provided. (Trac #241, svn r2664)

Jelte Jansen's avatar
Jelte Jansen committed
661 662 663 664 665
  80.	[bug]		jelte
	bindctl no longer accepts configuration changes for unknown or
	non-running modules (for the latter, this is until we have a
	way to verify those options, at which point it'll be allowed
	again).
Jelte Jansen's avatar
Jelte Jansen committed
666
	(Trac #99, r2657)
Jelte Jansen's avatar
Jelte Jansen committed
667

JINMEI Tatuya's avatar
JINMEI Tatuya committed
668 669 670 671 672 673 674 675 676 677 678 679
  79.	[func]		feng, jinmei
	Refactored the ASIO link interfaces to move incoming XFR and
	NOTIFY processing to the auth server class.  Wrapper classes for
	ASIO specific concepts were also provided, so that other BIND 10
	modules can (eventually) use the interface without including the
	ASIO header file directly.  On top of these changes, AXFR and
	NOTIFY processing was massively improved in terms of message
	validation and protocol conformance.  Detailed tests were provided
	to confirm the behavior.
	Note: Right now, NOTIFY doesn't actually trigger subsequent zone
	transfer due to security reasons. (Trac #221, r2565)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
680 681 682 683 684 685 686 687 688 689 690
  78.	[bug]		jinmei
	lib/dns: Fixed miscellaneous bugs in the base32 (hex) and hex
	(base16) implementation, including incorrect padding handling,
	parser failure in decoding with a SunStudio build, missing
	validation on the length of encoded hex string.  Test cases were
	more detailed to identify these bugs and confirm the fix.  Also
	renamed the incorrect term of "base32" to "base32hex".  This
	changed the API, but they are not intended to be used outside
	libdns++, so we don't consider it a backward incompatible change.
	(Trac #256, r2549)

691 692
  77.	[func]		zhanglikun
	Make error message be more friendly when running cmdctl and it's 
693
	already running(listening on same port)(Trac #277, r2540)
694

Jelte Jansen's avatar
Jelte Jansen committed
695 696 697 698 699 700
  76.	[bug]		jelte
	Fixed a bug in the handling of 'remote' config modules (i.e.
	modules that peek at the configuration of other modules), where
	they answered 'unknown command' to commands for those other
	modules. (Trac #278, r2506)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
701 702 703
  75.	[bug]		jinmei
	Fixed a bug in the sqlite3 data source where temporary strings
	could be referenced after destruction.  It caused various lookup
JINMEI Tatuya's avatar
JINMEI Tatuya committed
704
	failures with SunStudio build. (Trac #288, r2494)
JINMEI Tatuya's avatar
JINMEI Tatuya committed
705

JINMEI Tatuya's avatar
JINMEI Tatuya committed
706 707 708 709 710 711 712
  74.	[func]*		jinmei
	Refactored the cc::Session class by introducing an abstract base
	class.  Test code can use their own derived mock class so that
	tests can be done without establishing a real CC session.  This
	change also modified some public APIs, mainly in the config
	module. (Trac #275, r2459)

713 714 715 716 717
  73.	[bug]		jelte
  	Fixed a bug where in bindctl, locally changed settings were
	reset when the list of running modules is updated. (Trac #285,
	r2452)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
718 719 720 721 722 723
  72.	[build]		jinmei
	Added -R when linking python wrapper modules to libpython when
	possible.  This helps build BIND 10 on platforms that install
	libpython whose path is unknown to run-time loader.  NetBSD is a
	known such platform. (Trac #148, r2427)

Evan Hunt's avatar
Evan Hunt committed
724 725 726 727
  71.  [func]		each
  	Add "-a" (address) option to bind10 to specify an address for
	the auth server to listen on.

Evan Hunt's avatar
Evan Hunt committed
728 729 730 731 732 733 734 735
  70.  [func]		each
  	Added a hot-spot cache to libdatasrc to speed up access to
	repeatedly-queried data and reduce the number of queries to
	the underlying database; this should substantially improve
	performance.  Also added a "-n" ("no cache") option to
	bind10 and b10-auth to disable the cache if needed.
	(Trac #192, svn r2383)

736
bind10-devel-20100701 released on July 1, 2010
737

Jeremy C. Reed's avatar
Jeremy C. Reed committed
738
  69.  [func]*		jelte
739 740 741 742 743 744
	Added python wrappers for libdns++ (isc::dns), and libxfr. This
	removes the dependency on Boost.Python. The wrappers don't
	completely implement all functionality, but the high-level API
	is wrapped, and current modules use it now.
	(Trac #181, svn r2361)

Jeremy C. Reed's avatar
Jeremy C. Reed committed
745
  68.  [func]		zhanglikun
746 747 748 749 750 751 752
	Add options -c(--certificate-chain) to bindctl. Override class
	HTTPSConnection to support server certificate validation.
	Add support to cmdctl.spec file, now there are three configurable 
	items for cmdctl: 'key_file', 'cert_file' and 'accounts_file', 
	all of them can be changed in runtime.
	(Trac #127, svn r2357)

Jeremy C. Reed's avatar
Jeremy C. Reed committed
753 754 755 756 757 758 759 760 761
  67.  [func]		zhanglikun
	Make bindctl's command parser only do minimal check.
	Parameter value can be a sequence of non-space characters,
	or a string surrounded by quotation marks (these marks can
	be a part of the value string in escaped form). Make error
	message be more friendly. (If there is some error in
	parameter's value, the parameter name will be provided).
	Refactor function login_to_cmdctl() in class BindCmdInterpreter:
	avoid using Exception to catch all exceptions.
762 763
	(Trac #220, svn r2356)

Jeremy C. Reed's avatar
Jeremy C. Reed committed
764
  66.  [bug]		each
Evan Hunt's avatar
Evan Hunt committed
765 766
	Check for duplicate RRsets before inserting data into a message
	section; this, among other things, will prevent multiple copies
767
	of the same CNAME from showing up when there's a loop. (Trac #69,
768
	svn r2350)
Evan Hunt's avatar
Evan Hunt committed
769
    
Jeremy C. Reed's avatar
Jeremy C. Reed committed
770 771 772 773 774 775 776 777 778
  65.  [func]		shentingting
	Various loadzone improvements: allow optional comment for
	$TTL, allow optional origin and comment for $INCLUDE, allow
	optional comment for $ORIGIN, support BIND9 extension of
	time units for TTLs, and fix bug to not use class as part
	of label name when records don't have a label but do have
	a class.  Added verbose options to exactly what is happening
	with loadzone.  Added loadzone test suite of different file
	formats to load.
tingting shen's avatar
tingting shen committed
779
	(Trac #197, #199, #244, #161, #198, #174, #175, svn r2340)
780

Jeremy C. Reed's avatar
Jeremy C. Reed committed
781 782 783 784 785
  64.  [func]		jerry
	Added python logging framework. It is for testing and
	experimenting with logging ideas. Currently, it supports
	three channels (file, syslog and stderr) and five levels
	(debug, info, warning, error and critical).
786 787
	(Trac #176, svn r2338)

Jeremy C. Reed's avatar
Jeremy C. Reed committed
788
  63.  [func]		shane
Evan Hunt's avatar
Evan Hunt committed
789 790 791 792
	Added initial support for setuid(), using the "-u" flag. This will
	be replaced in the future, but for now provides a reasonable 
	starting point.
	(Trac #180, svn r2330)
793 794 795 796 797 798 799 800 801

  62.  [func]		jelte
	bin/xfrin: Use the database_file as configured in Auth to transfers
	bin/xfrout: Use the database_file as configured in Auth to transfers

  61.  [bug]		jelte
	bin/auth: Enable b10-auth to be launched in source tree
	(i.e. use a zone database file relative to that)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
802 803 804 805
  60.	[build]		jinmei
	Supported SunStudio C++ compiler.  Note: gtest still doesn't work.
	(Trac #251, svn r2310)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
806 807 808 809 810 811 812
  59.	[bug]		jinmei
	lib/datasrc,bin/auth: The authoritative server could return a
	SERVFAIL with a partial answer if it finds a data source broken
	while looking for an answer.  This can happen, for example, if a
	zone that doesn't have an NS RR is configured and loaded as a
	sqlite3 data source. (Trac #249, r2286)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
813 814 815 816 817 818
  58.	[bug]		jinmei
	Worked around an interaction issue between ASIO and standard C++
	library headers.  Without this ASIO didn't work: sometimes the
	application crashes, sometimes it blocked in the ASIO module.
	(Trac #248, svn r2187, r2190)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
819 820 821 822
  57.	[func]		jinmei
	lib/datasrc: used a simpler version of Name::split (change 31) for
	better readability.  No behavior change. (Trac #200, svn r2159)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
823 824 825 826
  56.	[func]*		jinmei
	lib/dns: renamed the library name to libdns++ to avoid confusion
	with the same name of library of BIND 9.
	(Trac #190, svn r2153)
Shane Kerr's avatar
Shane Kerr committed
827

JINMEI Tatuya's avatar
JINMEI Tatuya committed
828 829 830 831 832 833
  55.	[bug]		shane
	bin/xfrout: xfrout exception on Ctrl-C now no longer generates
	exception for 'Interrupted system call'
	(Track #136, svn r2147)

  54.	[bug]		zhanglikun
834 835 836 837
	bin/xfrout: Enable b10-xfrout can be launched in source
	code tree.
	(Trac #224, svn r2103)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
838
  53.	[bug]		zhanglikun
839 840 841 842 843 844
	bin/bindctl: Generate a unique session ID by using 
	socket.gethostname() instead of socket.gethostbyname(), 
	since the latter one could make bindctl	stall if its own 
	host name can't be resolved.
	(Trac #228, svn r2096)

JINMEI Tatuya's avatar
JINMEI Tatuya committed
845
  52.	[func]		zhanglikun
846 847 848 849 850
	bin/xfrout: When xfrout is launched, check whether the
	socket file is being used by one running xfrout process, 
	if it is, exit from python.	If the file isn't a socket file 
	or nobody is listening, it will be removed. If it can't 
	be removed, exit from python.
851
	(Trac #151, svn r2091)
852

853 854
bind10-devel-20100602 released on June 2, 2010

Jeremy C. Reed's avatar
Jeremy C. Reed committed
855
  51.   [build]		jelte
856 857 858 859 860
	lib/python: Add bind10_config.py module for paths and
	possibly other configure-time variables. Allow some components
	to find spec files in build tree when ran from source.
	(Trac #223)

861 862 863 864
  50.	[bug]		zhanglikun
	bin/xfrin: a regression in xfrin: it can't communicate with 
	a remote server. (Trac #218, svn r2038)

865
  49.	[func]*		jelte
866 867 868 869 870
	Use unix domain sockets for msgq. For b10-msgq, the command
	line options --msgq-port and -m were removed. For bind10,
	the -msgq-port option was removed, and the -m command line
	option was changed to be a filename (instead of port number).
	(Trac #183, svn r2009)
871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888

  48.	[func]		jelte
	bin/auth: Use asio's io_service for the msgq handling.
	(svn r2007)

  47.	[func]		zhanglikun
	bin/cmdctl: Add value/type check for commands sent to
	cmdctl. (Trac #201, svn r1959)

  46.	[func]		zhanglikun
	lib/cc: Fix real type data encoding/decoding. (Trac #193,
	svn r1959)

  45.	[func]		zhanglikun
	bin/bind10: Pass verbose option to more modules. (Trac
	#205, svn r1957)

  44.   [build]         jreed
889
	Install headers for libdns and libexception. (Trac #68,
890 891 892 893 894 895 896
	svn r1941)

  43.   [func]          jelte
	lib/cc: Message queuing on cc channel. (Trac #58, svn r1870)

  42.   [func]          jelte
	lib/python/isc/config:      Make temporary file with python
897
	tempfile module instead of manual with fixed name. (Trac
898 899 900 901 902 903 904
	#184, svn r1859)

  41.   [func]          jelte
	Module descriptions in spec files. (Trac #90, svn r1856)

  40.   [build]         jreed
	Report detected features and configure settings at end of
905
	configure output. (svn r1836)
906 907 908 909 910

  39.   [func]*         each
	Renamed libauth to libdatasrc.

  38.   [bug]           zhanglikun
911 912 913 914
	Send command 'shutdown' to Xfrin and Xfrout when boss receive SIGINT.
	Remove unused socket file when Xfrout process exits. Make sure Xfrout
	exit by itself when it receives SIGINT, instead of being killed by the
	signal SIGTERM or SIGKILL sent from boss.
915 916 917
	(Trac #135, #151, #134, svn r1797)

  37.   [build]         jinmei
918
	Check for the availability of python-config. (Trac #159,
919 920 921 922 923 924 925
	svn r1794)

  36.	[func]		shane
	bin/bind10:	Miscellaneous code cleanups and improvements.
	(Trac #40, svn r2012)

  35.	[bug]		jinmei
JINMEI Tatuya's avatar
JINMEI Tatuya committed
926 927
	bin/bindctl: fixed a bug that it didn't accept IPv6 addresses as
	command arguments. (Trac #219, svn r2022)
928

929
  34.	[bug]		jinmei
JINMEI Tatuya's avatar
JINMEI Tatuya committed
930 931
	bin/xfrin: fixed several small bugs with many additional unit
	tests.  Fixes include: IPv6 transport support, resource leak,
JINMEI Tatuya's avatar
JINMEI Tatuya committed
932
	and non IN class support. (Trac #185, svn r2000)
933

934
  33.   [bug]           each
935 936 937
	bin/auth: output now prepended with "[b10-auth]" (Trac
	#109, svn r1985)

938
  32.	[func]*		each
Evan Hunt's avatar
Evan Hunt committed
939 940 941 942
	bin/auth: removed custom query-processing code, changed
        boost::asio code to use plain asio instead, and added asio
        headers to the source tree.  This allows building without
        using an external boost library. (Trac #163, svn r1983)
943

944
  31.	[func]		jinmei
JINMEI Tatuya's avatar
JINMEI Tatuya committed
945 946
	lib/dns: added a separate signature for Name::split() as a
	convenient wrapper for common usage. (Trac #49, svn r1903)
947

948
  30.	[bug]		jinmei
949 950 951 952
	lib/dns: parameter validation of Name::split() was not sufficient,
	and invalid parameters could cause integer overflow and make the
	library crash. (Trac #177, svn r1806)

953 954 955 956 957 958 959 960 961 962
bind10-devel-20100421 released on April 21, 2010

  29.	[build]
	Enable Python unit tests for "make check". (svn r1762)

  28.	[bug]
	Fix msgq CC test so it can find its module. (svn r1751)

  27.	[build]
	Add missing copyright license statements to various source
963
	files. (svn r1750)
964 965 966 967 968 969 970 971 972 973 974

  26.	[func]
	Use PACKAGE_STRING (name + version) from config.h instead
	of hard-coded value in CH TXT version.bind replies (Trac
	#114, svn r1749)

  25.	[func]*
	Renamed msgq to b10-msgq. (Trac #25, svn r1747, r1748)

  24.	[func]
	Support case-sensitive name compression in MessageRenderer.
975
	(Trac #142, svn r1704)
976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062

  23.	[func]
	Support a simple name with possible compression. (svn r1701)

  22.	[func]
	b10-xfrout for AXFR-out support added. (svn r1629, r1630)

  21.	[bug]
	Make log message more readable when xfrin failed. (svn
	r1697)

  20.	[bug]
	Keep stderr for child processes if -v is specified. (svn
	r1690, r1698)

  19.	[bug]
	Allow bind10 boss to pass environment variables from parent.
	(svn r1689)

  18.	[bug]
	Xfrin warn if bind10_dns load failed. (svn r1688)

  17.	[bug]
	Use sqlite3_ds.load() in xfrin module and catch Sqlite3DSError
	explicitly. (svn r1684)

  16.	[func]*
	Removed print_message and print_settings configuration
	commands from Xfrin. (Trac #136, svn r1682)

  15.	[func]*
	Changed zone loader/updater so trailing dot is not required.
	(svn r1681)

  14.	[bug]
	Change shutdown to actually SIGKILL properly. (svn r1675)

  13.	[bug]
	Don't ignore other RRs than SOA even if the second SOA is
	found. (svn r1674)

  12.	[build]
	Fix tests and testdata so can be used from a read-only
	source directory.

  11.	[build]
	Make sure python tests scripts are included in tarball.
	(svn r1648)

  10.	[build]
	Improve python detection for configure. (svn r1622)

   9.	[build]
	Automake the python binding of libdns. (svn r1617)

   8.	[bug]
	Fix log errors which may cause xfrin module to crash. (svn
	r1613)

   7.	[func]
	New API for inserting zone data to sqlite3 database for
	AXFR-in. (svn r1612, r1613)

   6.	[bug]
	More code review, miscellaneous cleanups, style guidelines,
	and new and improved unit tests added.

   5.	[doc]
	Manual page cleanups and improvements.

   4.	[bug]
	NSEC RDATA fixes for buffer overrun lookups, incorrect
	boundary checks, spec-non-conformant behaviors. (svn r1611)

   3.	[bug]
	Remove a re-raise of an exception that should only have
	been included in an error answer on the cc channel. (svn
	r1601)

   2.	[bug]
	Removed unnecessary sleep() from ccsession.cc. (svn r1528)

   1.	[build]*
	The configure --with-boostlib option changed to --with-boost-lib.

bind10-devel-20100319 released on March 19, 2010

1063
For complete code revision history, see http://bind10.isc.org/browser
1064
Specific git changesets can be accessed at:
1065 1066 1067
	http://bind10.isc.org/changeset/?reponame=&old=rrrr^&new=rrrr
or after cloning the original git repository by executing:
	% git diff rrrr^ rrrr
1068 1069
Subversion changesets are not accessible any more.  The subversion
revision numbers will be replaced with corresponding git revisions.
1070
Trac tickets can be accessed at: https://bind10.isc.org/ticket/nnn
1071

1072 1073 1074 1075
LEGEND
[bug] general bug fix.  This is generally a backward compatible change,
	unless it's deemed to be impossible or very hard to keep
	compatibility to fix the bug.
1076
[build] compilation and installation infrastructure change.
1077 1078 1079 1080 1081 1082
[doc] update to documentation.  This shouldn't change run time behavior.
[func] new feature.  In some cases this may be a backward incompatible
	change, which would require a bump of major version.
[security] security hole fix.  This is no different than a general bug fix
	except that it will be handled as confidential and will cause 
	security patch releases.
1083
*: Backward incompatible or operational change.